Error AA 738 while periodic asset posting - ASKB

Hello,
could you please advise if anybody have encounterd following error when executing transaction: ASKB (test run) as background processing:
Number range 01 has not been created for document type AA.
Message no. AA738
Diagnosis
No valid number range interval has been created for document type AA.
Procedure
Specify an interval for number range 01 in the year 999 for company code XXXX.
I checked that for the mentioned company code number range 01 is created for the current year.
Additionally users executed production run of ASKB (without a test run) and then got an error: Account determination - Loss made on asset retirement w/o reven. not found for area 20 for account group 1411000 - this was fixed but then additional error AA738 came up.
If you can advise how to get rid of error AA738, I would be more than grateful.
Thank you in advance,
Monika

Hi
Though the error says 999, usually its maintained for 9999 (assuming there is no issue wiht your FYsettings)
In addition to that,
The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
What I suggest, pls go thru the blue colour 'i' icon in that T code input screen.
regards
S

Similar Messages

Error message AA119 while creating asset master through AS01

Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DD

Dear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD

Error F5 702 while trying to post a parked document in MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help?
Regards,
Anitha

Hello Raju,
Its a invoice which the user posts via a MIRO.
I can do it with a FM also, U r right.
There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there has been any exchange rate problems etc...
Thanks,
Anitha

While doing sample posting in QA32 tansaction below error getting

Hi ....
Recently we have changed the business area from 25 to 11 for all cost centers from 01.04.2014 but unfortunately we didn't change for one cost center now one error is hitting While doing sample posting in QA32.
The account assignment objects are defined for different business areas
Message no. KI196
Diagnosis
You entered several account assignment objects assigned to different business areas. In a posting row all account assignment objects must be assigned to the same business area.
Procedure
Change the account assignment objects if required. The following business areas have been assigned so far:
Business area Type Object
OBJECT_IDENT_GET_OR
ML11 ORD 86000352
If account assignment objects of different business areas are posted to at the same time, whereby the business area of the posting row is derived from the real posting of the CO account assignment object, you can make the error message a caution or a note, or you can deactivate it entirely in Customizing. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 196.
Pls give me the solution it's urgent......

Hi,
You can make message KI196 to Warning message. Go To transaction code OBA5 and change this message to Warning instead of Error. Please find below text from the long text information of message KI196.
Regards,
Anand Raichura

Error during Year-end closing Asset Accounting (AJAB)

Hi,
While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted".
Processing the error message:
While proceeding through the error message details I checked "Define How Dep Areas Post to GL" and found that 4 depreciation areas are maintained as under:
Area/Description/ G/L/ Target Group
01/ Book dep/1 (Area posts in Realtime)/0L (Leading Ledger)
15/Income tax dep/0 (Area does not post)/ Blank
21/ IFRS/ 3 (Area posts dep only)/1F (IFRS Ledger)
Then I clicked on start APC program, which leads to transaction ASKB (Periodic Asset Posting). The transaction could not be posted as document type is not assigned for periodic posting of Asset Values in SPRO>Fin. Accounting (New)>Asset Accounting>Integration with GL Accounting>Post APC values periodically to GL Accounting>Specify document type for periodic posting of asset values.
I've got 2 queries:
1) whether year-end closing can be executed if the document type is assigned and transaction ASKB is run.
2) If the answer to first query is yes, how come the same error did not encounter in other company codes (the error occurred only in 2 company codes). I've also checked the depreciation area maintained in asset masters of the company code where no such problem was encountered and found it to be same as the company code where the problem has occurred.
Seek your expert advise to resolve the issue.
Thanks,
Vipin Patankar

Hi Malhar,
Thanks for your prompt reply. I understand that the issue can be resolved by assigning document type and execute ASKB. At present document type 'AF' is being used for depreciation posting, can we use the same document type for APC value posting or some other document type should be used.
I still need some more highlight on the reason for not facing the problem in other company codes.
Thanks,
Vipin Patankar

What is the difference between periodic asset postings and depreciation pos

Hi,
What is the difference between periodic asset postings and depreciation postings in asset accounting.
Regards, Naresh Yadav

ASKBN or ASKB : Periodic asset posting will update acquisition and depreciation in depreciation area other than area 01 which are maintained as post "APC and depreciation on periodic basis" by using ASKB or ASKBN
Separate set of GL accounts will be used for ASKBN. You can run ASKBN or ASKB as and when you need it and not necessarily nonth end
AFAB : To post a book depreciation at every period and this activity usually every month end which posts depreciation 01 Book Depreciation and other areas maintained as realtime at OADB
Srinivas

Problem while creating assets using BAPI

Use table enhancement BAPI_TE_ANLU
Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
Regards,
Shyam

ERROR Message no. AU265 :While closing asset accounting year ------ URGENT

Hi All,
THE ISSUE IS URGENT . Please help in resolving it.
One of our users have missed to do the repeat depreciation run for
Asset 4464 (Co. code 0006)in 12th period as she has raised a credit
memo for this
Asset after she did normal depreciation run for period 12, 2007.
Than the financial year 2007 FI-GL was closed and when she was trying
to do Asset year closing for 2007 through t-code AJAB she got the error
that depreciation not updated for asset 4464 and realized that she hasmissed a repeat depreciation run .
Than I replied back to her that there is no other way out to solve this
problem other than to get the last fiscal year opened and than do the
repeat run and not to do any posting for this year before closing the
previous year.
But in the mean while she has already posted the depreciation for
Jan 08 for all assets and also posted the value for 4464 Asset in
Period Jan08 . Now when she is running AJAB she is getting error the
following error.
AU265 : Documents from last posting run in 2007 are not yet updated.
The sequence which the user has followed is as follows:
First, I ran depreciation for all assets in period 1, 2008 with no errors. But, the December depreciation for asset 4464 did not post in this run.
Then, I posted depreciation for asset 4464 in period 1 2008 (see document 300000881), with no errors by following the steps in the attached document.
1.     T-code AFAB
2.     Entered the criteria with repeat run for Asset 4464(I knew SAP would not allow me to post to 12/2007)
3.     F9 to process in background
4.     T-code SM35 to process batch
5.     Received error that period 12/2007 was not open for posting
6.     Changed posting date to 01/2008 and processed the batch
7.     Now, the remaining December 2007 depreciation for asset 4464 posted. See document 300000881.
8.     T-code AJAB (Year-End Closing Asset Accounting), again
9.     Received message that the Close was not carried out because Documents from last posting run in 2007 are not yet updated.
Please tell what can be done now to resolve this error.
Points will be rewarded if your answer helped.
Thanks & Regards,
Prachi

Prachi,
I faced a similar situation from 2004, we transfered that portion of credit memo into a dummy company code / Asset and a manual adjustment in 2007 for the credit memo portion... ofcourse there will be a difference but explainable...
In your situation... check if you can open 2007 repost the depreciation for 12 and clear this issue?
Hopefully this helps.

Depreciation Error in AFAB : asset posting not completed

Hi All
Depreciation run was not finished for past 3 years before that one of the Scrapping Asset was posted without execute the depreciation run. For that reason we are unable close the period in asset depreciation run by using transaction code AFAB ( current as well as previous year ).
We are getting the below error while executing the transaction code AFAB.
Error Message: asset posting not completed.
We are trying to post the depreciation run manually also is not possible, due to depreciation run has already retired.
Please help us to provide the necessary solution to resolve the issue.
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 29, 2010 4:12 PM
Edited by: KGUNASEKAR on Apr 29, 2010 4:26 PM

Thanks vaibav
Please clarify the below point.
if i am specify the 0000 (No depereciation) dep key on the asset master will it system allow to close the previous period by using transaction code AJAB.
Regards
K.Gunasekar

Error while doing asset retiremnt entry

Hi,
While doing Asset Retiremnt through f-92 sale with revenue to customer.
Geeting error message as ' Auxiliary Account Assingment to asset not possible, remove entry"
I have given 1st line tem as customer account 2nd as asset sale offset account.
Also ticked on that asset retiremnt check box and selected appropriate asset.
Pls help...
Regards
Raj

Hi,
According to ur threat it seems like you have entered the asset number in account assignment part of document entry.
you are not suppose to enter any asset number, which is to be retired in the line item.
first line item will be customer Debit
second line item will be with posting key 50
GL account (Offsetting Account)
enter the value
dont enter the asset number in the asset number field.
just select asset retirement check box only
once you selected the asset retirement check box, you will get one pop up screen, it will ask you to enter the asset number, here only you are supposed to enter the asset number, asset value date, complete retiement check box (if you need ).
then press continue button
simulate
post
This will defenitely solves ur issue.
Please do not forget to assign score to me
Thanks,
Srinu

Error While Creating Asset Master in AS01

Hi,
While creating Asset Master in AS01,I am getting the below error.
E003 SYST: Period 000 is not valid in financial year variant
I am using the standard Fiscal year variant V3
Kindly help me to fix this issue
Thanks
Kishore

Hi
GO to the transaction code OBY6 , double clcik on company code and see have you asigned the fiscal year variant to company code
Kindly revert in case of any query
regards
roobal

Error While Creating Asset Class

Hi Friends,
I am getting the following error in development client while creating the asset class AB2200.
"Screen Layout 200 was not created" but the same was created.
Please guide me how to handle this error and the reason for me getting this error message while creating asset class.
Your quick response would be highly solicited.
Thanks and Regards,
C.R.Srinath

Hi Srinath
There are 2 things.. Create the screen layout and Define the screen layout... (IMG> AA > Master Data> Screen Layout for asset classes)
Complete both the steps here and specify the same sccreen layout in your asset class
Regards
Ajay M

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Error message ZY012 while posting trip to FI

Hi,
I'm getting an error message while checking the posting document before actual posting to FI. The error message is as below: -
"E ZY012 Account _ _ _ _ _ _ _must use owned building cost centers"
Kindly let me know if you have any idea on how to resolve this issue.
Thanks,
Sudhakar

Hi,
By looking at the message u201CZY012u201D here u2018ZYu2019 could be the trip provision variant name and u2018012u2019 could be the account symbol against which the GL Code (Cost Element) is mapped. Coming to the other part of the message, u201CAccount _ _ _ _ _ _ _must use owned building cost centers" it looks like there is some Validation Rule set in Controlling for the cost element that is assigned to this Account Symbol.
If the observation is correct, please look in T.Code: GGB0 for any Validation Rule set for Cost Element Groups falling in this category (Owned building cost centers). If you know the name of the Cost Element Group and want to look for the Cost Element, go to T.Code: GS03 give Cost Element Group name and enter. Accordingly, if there is no entry of this Cost Element, ask your client and include it in Cost Element Group in T.Code: GS02 else, change the mapping of some other Cost Element (GL Code) against this account symbol.
I hope it is clear.
Regards,
Kiron Kumar T.

While user is posting the goods delivery. He was getting error "Field selec

Hello
SAP Experts
i am getting an error
While user is posting the goods delivery. He was getting error "Field selection for movement type 981/account 1830200817(stock transfer account) differs for customer goods movement(015)" - Message no M7093.
Thanks & Regards
Narendra G

Hi Narendra,
Go to SE38 and run report RM07CUFA .This report gives you details as it compares FI and MM customizing ( mvmt type / acct G/L accnt no)
Either you have to change the setting of the GL or the movement type..as per business requirement.
This report will exactly give you which field has the conflict.
Probable some field is required in FI and suppressed in MM or vice versa.. check it out.
Regards,
SAPFICO

Error AA 738 while periodic asset posting - ASKB

Similar Messages

Maybe you are looking for