Error: abc bytecode decoding failed
Currently i am using Flex SDK Version 3.0.0 build 477 and Flex Builder 3
I would like to upgrade to FP 10 inorder to use the feaure fileReference.save();
I have followed http://opensource.adobe.com/wiki/display/flexsdk/Targeting+Flash+Player+10 to configure with FP10.
After configuring my project with flashplayer 10, their are some errors while compiling application in both Flex builder and compiler.
ERROR:
Loading configuration file sdks\3.0.0\frameworks\flex-config.xml
playerglobal.swc(flash/display/Graphics): Error: abc bytecode decoding failed.
playerglobal.swc(flash/geom/Matrix3D): Error: abc bytecode decoding failed.
playerglobal.swc(flash/display/BitmapData): Error: abc bytecode decoding failed.
Trying to resolve this issue but no success.
Any help would be Thanks full
Did you remove the link to the old playerglobal.swc?
You should have something similar to this in your .actionscriptProperties:
<libraryPathEntry kind="4" path="">
<excludedEntries>
<libraryPathEntry kind="3" linkType="2" path="${PROJECT_FRAMEWORKS}/libs/player/9/playerglobal.swc" useDefaultLinkType="false"/>
</excludedEntries>
</libraryPathEntry>
Similar Messages
-
Flex builder 3 is giving me three 'abc bytecode decoding failed' errors when i open an kind of air project.
I am running windows xp pro sp2, using the 3.3 sdk and flash player 10. I believe this error is caused by flex builder not targeting the correct flash player for the given sdk but I have followed all the directions to make flex builder target flash player 10 and i still cannot resolve it?
I have been able to make flex projects target flash player 10 but not air projects.
Any help would be great as I can't see a way of fixing this?
Regards
AdamThe error must be when you try to execute the AIR app, ActionScript
Bytecode is only executed by the AIR runtume or Flash Player. A
project clean sometimes help.
Sincerely,
Michael
El 11/05/2009, a las 8:22, flexchief <[email protected]> escribió:
>
Flex builder 3 is giving me three 'abc bytecode decoding failed'
errors when i open an kind of air project.
>
>
I am running windows xp pro sp2, using the 3.3 sdk and flash player
10. I believe this error is caused by flex builder not targeting the
correct flash player for the given sdk but I have followed all the
directions to make flex builder target flash player 10 and i still
cannot resolve it?
>
I have been able to make flex projects target flash player 10 but
not air projects.
>
Any help would be great as I can't see a way of fixing this?
>
Regards
Adam
> -
Error #1034 Type Coercion fail with registerClassAlias and nested Vectors
I'm attempting to use flash.net.registerClassAlias and ByteArray.writeObject in order to serialize/deserialize data with static type information. It works as you'd expect in the general case but I've run into problems with some nested Vectors that I don't understand. Hopefully someone can point out if I'm just missing something.
For what I understand, we must register both the scalar types and a one-deep specification of a Vector for that scalar type in order to use nested Vectors. For example:
flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
This should allow us to read/write objects of type TestStructureInner, Vector.<TestStructureInner>, and Vector.<Vector.<TestStructureInner>> into ByteArrays. And in general it seems to work.
Attached though is a simplified test case that fails, however. The first time we deserialize the data it works. The subsequent time, however, we encounter the following runtime error #1034.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fcb9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbc9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fdd1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fce1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbf1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fec1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fad9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fa61 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f9e9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f971 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
Re-registering the class aliases again via flash.net.registerClassAlias works in this test case but isn't 100% for our actual application (I'm reticent to even mention it but it seems relevant). Is there a step I'm missing here? Any light shed would be appreciated.
// mxmlc -debug Test0.as
package
import Base64; // http://code.google.com/p/jpauclair-blog/source/browse/trunk/Experiment/Base64/src/Base64.a s
import flash.net.registerClassAlias;
import flash.events.Event;
import flash.utils.ByteArray;
import flash.display.Sprite;
import flash.display.Stage;
import flash.system.System;
public class Test0 extends Sprite
static private const OPERATION_SERIALIZE:uint = 0;
static private const OPERATION_DESERIALIZE_AND_FAIL:uint = 1;
static private const OPERATION_DESERIALIZE_AND_SUCCEED:uint = 2;
static private var staticStage:Stage;
private var bar:Vector.<TestStructure>;
* common functions
static private function registerClassAliases():void
flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
flash.net.registerClassAlias("TestStructure", TestStructure);
static public function staticDeserialize():Object
var byteArray:ByteArray = Base64.decode("EBUAG1Rlc3RTdHJ1Y3R1cmUKEwAHZm9vEAEAH1ZlY3RvclRlc3RJbm5lcgoBEAEABAoBEAEABA oBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABA==");
byteArray.position = 0;
return byteArray.readObject();
public function Test0():void
registerClassAliases();
// Switching operation between the constants demonstrates failure/success in a couple of different ways.
// SERIALIZE is just used to prepare the base64 string for subsequent tests.
var operation:int = OPERATION_SERIALIZE_AND_FAIL;
if (operation == OPERATION_SERIALIZE)
trace("Serializing");
// outputs base64 string for subsequent tests
serialize();
else if (operation == OPERATION_DESERIALIZE_AND_FAIL)
trace("Fail case");
// perform successful one deserialization, then one failing one.
deserializeOnceThenFail();
else if (operation == OPERATION_DESERIALIZE_AND_SUCCEED)
trace("Success via re-registration");
// perform successful one deserialization, then another successful one.
deserializeOnceThenSucceed();
* serialize
// outputs base64 string we use for subsequent tests.
private function serialize():void
var baz:Vector.<TestStructure> = new Vector.<TestStructure>;
for (var i:int=0; i<10; ++i)
baz.push(new TestStructure);
var byteArray:ByteArray = new ByteArray;
byteArray.writeObject(baz);
trace(Base64.encode(byteArray));
* deserializeOnceThenFail
// perform successful one deserialization, then one failing one.
public function deserializeOnceThenFail():void
// save stage
staticStage = stage;
// the first deserialize will proceed without error.
staticDeserialize();
trace("Successful deserialize");
// add an event listener in order to invoke error on subsequent frame
stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
// remove event listener and invoke again.
static private function doEnterFrameOnceThenFail(e:Event):void
staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
staticDeserialize();
trace("unsuccessful deserialize2");
* deserializeOnceThenSucceed
* Here, we re-call flash.net.registerClassAlias on all our class types when running.
// perform successful one deserialization, then one failing one.
public function deserializeOnceThenSucceed():void
// save stage
staticStage = stage;
// the first deserialize will proceed without error.
staticDeserialize();
trace("Successful deserialize");
// add an event listener in order to invoke error on subsequent frame
stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
// remove event listener and invoke again.
static private function doEnterFrameOnceThenSucceed(e:Event):void
staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
registerClassAliases();
staticDeserialize();
trace("successful deserialize2");
internal class TestStructureInner
public var value:int;
internal class TestStructure
public var foo:Vector.<Vector.<TestStructureInner>> = new Vector.<Vector.<TestStructureInner>>;The error would imply that ImageAssetEvent does not inherit
DisplayEvent. Either modify the inheritance chain or listen for a
basic Event object (flash.events.Event) and cast inside the
function. -
"Download decoding failed" message - help!
I've been trying to download a 40 MB file and once I've downloaded around 23MB of it, the download stops dead and I get a "Download decoding failed" message in my downloads window. The file works for other people so it must be a problem at my end. I've tried using Firefox as well, same problem. Does anyone have any idea how I can fix this?
Thanks!
Scott
iMac G5 Mac OS X (10.4.7)I ran my contact.js through JSHint and fixed the errors that it came up with -- I also changed the action back to "". And .... it still hates me! Here's my contact.js code, if interested!
$(document).ready(function(){
$("#send").click(function(){
var name = $("#name").val();
var email = $("#email").val();
var message = $("#message").val();
var error = false;
if(email.length === 0 || email.indexOf("@") == "-1" || email.indexOf(".") == "-1"){
$("#error_email").fadeIn(500);
}else{
$("#error_email").fadeOut(500);
if(message.length === 0){
$("#error_message").fadeIn(500);
}else{
$("#error_message").fadeOut(500);
if(error === false){
$("#send").attr({"disabled" : "true", "value" : "Loading..." });
$.ajax({
type: "POST",
url : "send.php",
data: "name=" + name + "&email=" + email + "&subject=" + "You Got Email" + "&message=" + message,
success: function(data){
if(data == 'success'){
$("#btnsubmit").remove();
$("#mail_success").fadeIn(500);
}else{
$("#mail_failed").html(data).fadeIn(500);
$("#send").removeAttr("disabled").attr("value", "send");
}return false; -
Hi,
We have Exchange 2013 running in our network, and are using Outlook 2013 on all PCs. We added some users several weeks ago, and they are not showing up in the Address Book. When we try to download the Address Book in Outlook, we receive the error 0x8004010F
: The operation failed. An object cannot be found.
Please let me know how I can start to troubleshoot this.
Regards,
ChrisHi
There is a multiple reason to receive an error 0x8004010f, it is just a generic MAPI error.
Let’s check all settings are configured the way it is supposed to be: -
1. Make sure the authentication setting is set up properly by using this command: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *Auth* -AutoSize
2. Check URL’S are configured properly: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *url* -AutoSize
3. Check the location of OAB: -
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
4. Now find out the location of the database on which the Arbitration mailbox resides: -
Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
Get-MailboxDatabaseCopyStatus MGUxxx
5. It is also important to ensure all database has the OAB set up properly for this use CMDLET: -
Get-MailboxDatabase | Ft Name, *book*
6. If one or more database does not have OAB setup, then use CMDLET to set OAB for it: -
Get-Mailboxdatabase | Set-MailboxDatabase -OfflineAddressBook “Default Offline Address Book”
7. If the issue is affecting only one or specific set of users, then check they have an OAB specified on their account: -
Get-Mailbox abc.xyz | fl Name, OfflineAddressBook,Database
Please correct me if the information that I am having is wrong.
Reply awaited.
Thanks and regards
Ashish@S
Ashish@V -
i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
-
Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
ERROR VNIC creation job failed
Hello All,
I have brought oracle VM X86 manager into ops center 12c control. When I try to create a new virtual machine it is throwing the ‘ERROR VNIC creation job failed’ error. Can anybody throw some light over this issue.
Thanks in advance.
Detailed log is
44:20 PM IST ERROR Exception occurred while running the task
44:20 PM IST ERROR java.io.IOException: VNIC creation job failed
44:20 PM IST ERROR VNIC creation job failed
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmCreateVnicsTask.doRun(OvmCreateVnicsTask.java:116)
44:20 PM IST ERROR com.sun.hss.services.virtualization.guestservice.impl.OvmAbstractTask.run(OvmAbstractTask.java:560)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
44:20 PM IST ERROR sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
44:20 PM IST ERROR sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
44:20 PM IST ERROR java.lang.reflect.Method.invoke(Method.java:597)
44:20 PM IST ERROR com.sun.scn.jobmanager.common.impl.TaskExecutionThread.run(TaskExecutionThread.java:194)
Regards,
georgeHi friends
I managed to find the answer. Internally it is has some indexes in the data base level. It still maintains the indexes in the shadow tables. Those all need to be deleted. With our Basis team help I have successfully deleted those and recreated the indexes.
As Soorejkv said sap note 1283322 will help you on this to understand the scenarios.
Thank you all.
Regards
Ram -
I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine. -
Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report
When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you -
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"
This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
NexusxoxHi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.
We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
SSRS report throwing error :- system.web.aspnethostingpermission failed
Hi,
I am facing an issue with SSRS report after implementing HTTPHandler in its web.config file of Report manager.
My reports were working fine. I deployed a dll in report manager BIN folder and added below tag in the web.config
<add verb="*" path="*.aspx" type="ISHandler.SyncHandler, ISHandler" />
ISHandler is the assembly/namespace and SyncHandler is the class name.
I am getting error when I try to access the report
error :- system.web.aspnethostingpermission failed.
Currently web.config contains below settings.
<securityPolicy>
<trustLevel name="RosettaMgr" policyFile="rsmgrpolicy.config" />
</securityPolicy>
<trust level="RosettaMgr" originUrl="" />
Can you please help where the security permission is missing ?
sanmayI am unable to see that. Please check.
sanmay
Maybe you are looking for
-
I am having trouble with Light Room 4... Why is it so slow at random Times??
Problem being that at random when I am going along selecting images or editing, Light Room decides to slow right now and pauses on a picture saying LOADING for a good minute until finally loaded. Light Room is up to date. I have also uninstalled and
-
Access Message header details in Adapter module
Hi I tried to find out solution for accessing sender service and namespace in adapter module...However I couldn't make out correct procedure to access the same. Incase any one aware of accessing sender service details in Module, please let me know...
-
Ipod in car not letting me get to playlists?
ipod in car not letting me get to playlists?
-
After updating my 4s to iOS 7,I lost my pics in my camera roll. Even after restoring backups from the cloud or iTunes, none come back. What can I do?
-
How can I restore the hard drive to an earlier date
I was wondering if there is a way to restore my computer to factory defaults like when I received my iMac, without a disk? I think it needs a good cleaning. It is running very slow and my web browsers keep freezing as well as skype. It doesn't matter