Error about mapping with sqlexec when delete data

I've created a sample replication process
There's no problem when i'm inserting data (lookup process is working well too)
but when i'm deleting data from source table it cannot delete record in target table
and this is the error
ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, CC.prm: Error mapping from GG_SOURCE.SOURCE to GG_TARGET.TRG_MAP
and this is code of replicat process
replicat cc
userid gg_target,password oracle
sourcedefs D:\GG\target\dirdef\source.def
map gg_source.source
, target gg_target.trg_map
, def ssource
, sqlexec (id chk_acct
     , query "select account_id_lkp id_out from lkp where account_id_lkp = :id_in"
     , params (id_in = acct_id))
, colmap (USEDEFAULTS
     ,ACCOUNT_NUMBER = ACCT_ID
     ,ACCT_MAP = @GETVAL (chk_acct.id_out));
Could anyone plese help?

Hi Deepshika,
Could you also advice me how u resolved this issue i am also getting same issue...i have also activate MSDTC Service ,Inbound/Outbound allowed & also allowed Distributed transaction in Firewall.
Regards
Shehzad

Similar Messages

Error loading Map Tile Layer when restart

Hi all,
I'm a newbie to Mapviewer. I'm having some problem after i restart the oc4j. Originally, when i insert the image into georaster and some other steps, then i did a xml_request for the map tile. It could load the map originally. When i restart the oc4j, it gives me the following error
2008-03-11 17:55:28.046 WARNING Cannot list base maps.
2008-03-11 17:55:28.203 ERROR Error in loading map tile layer config from databa
se!(TEST,ML1)
2008-03-11 17:55:28.203 ERROR Base map does not exist. Cannot create internal ma
p source.(TEST,ML1)
The mapviewer and app server is on the same domain but the database in on a different domain. When i tried to shift mapviewer to the same domain as the database, it won't cause this problem.
Could anyone suggest me any solution?
Message was edited by:
nvr4getu

Hi,
It's pointing to the correct data sources. I've even tried to remove all the map tile and data, then upload again from my test application, it can render the map. However, when i restart the oc4j, the error occur again. Is this a bug of mapviewer that mapviewer must be deploy on the same machine with database?
Cheng

Performance issue with FDM when importing data

In the FDM Web console, a performance issue has been detected when importing data (.txt)
In less than 10 seconds the ".txt" and the ".log" files are created the INBOX folder (the ".txt" file) and in the OUTBOX\Logs (the ".log" file).
At that moment, system shows the message "Processing, please wait” during 10 minutes. Eventually the information is displayed, however if we want to see the second page, we have to wait more than 20 seconds.
It seems a performance issue when system tries to show the imported data in the web page.
It has been also noted that when a user tries to import a txt file directly clicking on the tab "Select File From Inbox", the user has to also wait other 10 minutes before the information is displayed on the web page.
Thx in advance!
Cheers
Matteo

Hi Matteo
How much data is being imported / displayed when users are interacting with the system.
There is a report that may help you to analyse this but unfortunately I cannot remember what it is called and don't have access to a system to check. I do remember that it breaks down the import process into stages showing how long it takes to process each mapping step and the overall time.
I suspect that what you are seeing is normal behaviour but that isn't to say that performance improvements are not possible.
The copying of files is the first part of the import process before FDM then starts the import so that will be quick. The processing is then the time taken to import the records, process the mapping and write to the tables. If users are clicking 'Select file from Inbox' then they are re-importing so it will take just as long as it would for you to import it, they are not just asking to retrieve previously imported data.
Hope this helps
Stuart

Getting error while mapping fields btween DS and Data target IO

Hi,
I am getting error message "Rule(target field:0DEL_GR_WT): No source units assigned" while activating transfer rules btween Data source and Data target.
Infoobject has got mapped with source field BRGEW.
Even in the data source the field units are GEWEI
In BI the units are 0unit_of_wt.
Every thing seems to be fine,but while mapping fiellds in the transfermation i am getting above error

Hi,
I think u have to assign source unit in transformation .
double click on that particular filed and it will take you to other screen and there you have choose that field and have to assign,
if am wrong please ignore it.
Thanks,
Jack

Fatal Internal error: "oleautomgr.cpp", line 2832 when sending data by means of ActiveX methode

I have experienced error "Fatal Internal error: "oleautomgr.cpp", line 2832" during sending data to CAN card IXXAT iPCI-I XC16/PCI. LabVIEW communicates with that card by means of ActiveX methodes via "VCI Wrapper" which is COM object interface. Mass compiling of the project does not help. Card is initialized and configured propely. The driver card is working propely.
LabVIEW version is 8.5
The efect of that error is that labview completly shot down.
I appraciate any suggetions
thanks a lot

Hello,
Please try to reinstall the drivers for the CAN card, then make sure you close all references to the ActiveX control (at all levels) using the Automation Close primitive in LabVIEW.
Regards,
Emil

Error T400 screen with stripes when I install window 64 bit

Pls help me, with win 32 bit I didn't meet error the screen with stripes but when i install win 64 bit then the screen have stripes, i have updated full drivers for it.
Solved!
Go to Solution.

Are you using two sticks of unequal capacity ram.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Receiving error about missing VulcanControl.dll when starting Photoshop or Premiere CC

When i start Photoshop CC or Premiere CC it prompts CEPServiceManager telling me I am missing VulcanControl.dll and therefore the program can't be started.
Everything worked fine untill yesterday I installed Speedgrade CC and updated After Effects CC
In the Creative Cloud is now no longer lists Photoshop CC and Premiere CC as one of my apps
The strange thing is, I can't delete Photoshop or Premiere also.
What the .... went wrong and what can I do about it.
I'm in the middle of an importand project I have to finish tomorrow.
With kind regards,
Brian.

CC desktop lists applications as "Up to Date" when not installed
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

IOS 4 Error: "Unable to Move Messages" when Deleting Multiple Messages

Using an iPhone 4 and IOS 4.x (all versions to date including 4.1) if I'm in the All Inboxes view and use Edit to select multiple messages from more than one Exchange account and then delete them I get the following error:
Unable to Move Messages
The messages could not be moved to the mailbox Trash.
Deleting multiple messages from a single Exchange account is fine, but when selecting messages from more than one account the message pops up as many times as messages I'm trying to delete. I currently have three Exchange accounts on both 2003 and 2007 servers. This issue persists across multiple iPhone 4s as well as after a complete restore and manual setup of the Exchange accounts from scratch.

Not sure if this will work for the first poster, but it might for you, Busta999.
I have my email set up as an IMAP account and was getting the same "unable to move..." message for individual deletions. I suspected the problem for me had to do something with the trash bin on the phone and the trash bin on the server not communicating properly. I tried this and it worked for me, although from other posts, I see it doesn't work for everyone:
1. Go to "Settings"
2. Select "Mail, Contacts, Calendars"
3. Select the mail account in question
4. Select "Account Info"
4. Select "Advanced"
5. Select "Deleted Mailbox"
6. Under "On My Server", Click the "Trash" folder (or whatever your trash folder is called on your server). This should put a check mark beside it.

Mapping with xml-schema XML-data to relational tables

Hello,
is it possible to map data from xml documents to relational tables with xml-schema?
I mean not in nested tables but in relational tables with primary and foreign keys!
With SQL Server 2005 it is very easy, I dont believe that Oracle couldn't do this!
I searched but i cant find anything about that!
Thx
user445232

indeed, oracle does this for xml schema based xmltype data, however, these underlying tables are not accessable to the application. Maybe It should for next version, so folks who like to use relational model can use it without mapping it manually.
Actually, nested tables, are the same, their underlying tables (segments) are indeed relational tables, oracle manages them internally and not visiable to the application. You can find them in the user_segments, user_objects views though.

Problems with chart when using dates as data

When i try to create a chart with dates in column a, formated as 1/20/06, and temperatures in column b, the results is a chart missing the x axis dates (there are only tick marks) and the y axis does not list temperatures but instead lists dates (but with replicating dates and dates that are not listed in column a). How do i force the chart to display the selected data?
iMac, 17, 800mhz, G4 Mac OS X (10.3.9)

Hello
It seems that it is perfectly normal.
Dates are treated as numbers.
Here is a simple sheet whose row 1 is empty.
A2 contains: 31/12/1943 3 =A2 -> 14609
A3 contains: 01/01/2006 2 =A3 -> 37256
A4 contains: 10/10/2010 4 =A4 -> 38999
A6 contains: 10000 =DATETOTEXT(A6,0) -> 19/05/1931
A7 contains: 20000 =DATETOTEXT(A7,0) -> 04/10/1958
A8 contains: 30000 =DATETOTEXT(A8,0) -> 19/02/1986
A9 contains: 40000 =DATETOTEXT(A9,0) -> 07/07/2013
I am quite sure that the dates you see on the axis are those corresponding to number 0, 10000, 20000, 30000, 40000.
Yvan KOENIG (from FRANCE samedi 21 janvier 2006 17:02:20)

Help me reduce VHD file size when deleting data in OS.

I use Hyper-V on Server 2008 64bit installation to create a CentOS 5.8 VPS has the capacity 100GB. After a period of use of disk space used up nearly all 100GB. I have deleted a VPS data in this section but I checked VHD file size not reduced.
The way you can help me do this? I thank

Well if it was a Dynamic VHD(x) to begin with, you have just expanded it out to its maximum. In order to reduce its size, which is different that actually shrinking the partition and VHD(x) structure, here is what you can do.
If this was a Windows box I would have tell you to defrag inside the VM, shut it down and then use the tool from within Hyper-V Manager to Compact the VHD(x) file.
You could try the Compact against the your CentOS VM and see how much it does decrease the VHD(x) drive.
Without a good ext3 file reorg utility out there, you may not get down to the smallest possible size. You could always backup the VHD(x) file and restore it to another VHD(x) and swap the drives out. This laying down of the files from backup
would make them contiguous again and reduce your over all size of the VHD(x) file. That seems like a lot of work, but would meet your goal. I would try the Compact option first with the VM off to see what gets reclaimed.
Rob McShinsky (www.VirtuallyAware.com)
VirtuallyAware - Experiences in a Virtual World (Microsoft MVP - Virtual Machine)

Error: columns are not equal when writeback data from Essbase to Oracle

I got an error when writeback Budget data from Essbase to Oracle that: The number of columns returned by script [14] is less than the source data columns exposed [15] while my returned columns from script is 15
My report script:
<Sym
{MISSINGTEXT ""}
{ SUPMISSINGROWS }
//{SUPPAGEHEADING}
{SUPBRACKETS}
{SUPFEED}
{SUPCOMMAS}
{ TABDELIMIT }
{ NAMESON }
{ ROWREPEAT }
{ NOINDENTGEN }
{DECIMAL 0}
//<COLUMN ("Version")
<ROW ("Account","Sector","Resident / Non-Resident","HSP_Rates","Year","Profit_Center","Period","SubAccount","Currency","Branch","Scenario","Elements","Spare","Version")
<IDESCENDANTS "Account"
"S_NA"
"R_0"
"HSP_InputValue"
"FY11"
"Jan" "Feb" "Mar" "Apr" "May""Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec"
<IDESCENDANTS "Profit_Center"
"T_00"
"Local"
"P_682"
"B_01"
"Budget"
"Amount"
"E_0000"
"Approved"
*

the solution to uncomment -> //{SUPPAGEHEADING}

Issues with images when using data merge

Here's the deal. We are converting from CS6 to CC2014. I have a file that opens fine in CS6, the merge works fine.
If I open that file in CC2014 it works fine with the exact same list. But, if I relink a new list or change and update the current list, the data merge no longer works for the images in data merge. Even though nothing has changed in the file links.
I get the error that it cannot find the images.
Is this a know issue?
Mac OSX 10.10.1

It could be that the template is some how bunged up, even though it is evidently working in CS6. You might want to try, as a test, setting upa new document in CC, add the data file, put your placeholders in the document and merging. Then change the merge file, then try to update it.
All I can really say is that I have not experienced this issue (yet). And as far as I can tell, yours is the first post on the matter that isn't document corruption related, or that Previewing the records hasn't caused some malady. either needs the template remade or brought into a new file to fix. You issue sounds sort of half-way between.
Mike

"Server Busy" error in Crystal Reports XI when using date picker

Hi,
I have come across an issue whereby I get a error pop up when using the date picker to select a date parameter as I run a report from within Crystal Report XI on a particular PC. While I am able to type in the date using the yyyy-mm-dd format, selecting the date picker displays an error message titled "Server Error" stating that the program is not responding and giving options "Switch To" and "Retry". Selecting either button displays the same error message and need to kill the application from the Task Manager to restart.
I have run the same report from other PCs (including using the date picker to pick a date parameter) without the error popping up. All of the PCs have the same version of the application.
Has anyone come across this and how were you able to resolve it?

yes test is a formula that i used to calculate a difference
that should work, but i would put () around the
(if(remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)>0 and
remainder(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}),1)<1) then
truncate(({ztrptActVol.CPT}*{tlkpBblMileage.CPT}))+1
else ({ztrptActVol.CPT}*{tlkpBblMileage.CPT})
rounding in crystal is a pain in the &&

Error about mapping with sqlexec when delete data

Similar Messages

Maybe you are looking for