Error loading Map Tile Layer when restart

Hi all,
I'm a newbie to Mapviewer. I'm having some problem after i restart the oc4j. Originally, when i insert the image into georaster and some other steps, then i did a xml_request for the map tile. It could load the map originally. When i restart the oc4j, it gives me the following error
2008-03-11 17:55:28.046 WARNING Cannot list base maps.
2008-03-11 17:55:28.203 ERROR Error in loading map tile layer config from databa
se!(TEST,ML1)
2008-03-11 17:55:28.203 ERROR Base map does not exist. Cannot create internal ma
p source.(TEST,ML1)
The mapviewer and app server is on the same domain but the database in on a different domain. When i tried to shift mapviewer to the same domain as the database, it won't cause this problem.
Could anyone suggest me any solution?
Message was edited by:
nvr4getu

Hi,
It's pointing to the correct data sources. I've even tried to remove all the map tile and data, then upload again from my test application, it can render the map. However, when i restart the oc4j, the error occur again. Is this a bug of mapviewer that mapviewer must be deploy on the same machine with database?
Cheng

Similar Messages

Please Help; MAPVIEWER-05501 Map tile layer not found error

Hi, I am just a newbie to oracle mapviewer; I installed mv 11.x. on Xe 11g with mvdemo dataset as mentioned in demo setup instructions.
It seems everything went fine including mvdemo data import and oc4j instance.
Only thing if i am missing is when I goto create "Create a map tile layer" in "Manage MapViewer" of "Admin" page; I can find datasource but do not find anything in "base map" combo. Thus i can't create Any Map tile.
Now, when I click on a demo example I get following error:
*[MVglobalvariables.getmap.cacheconfig]mapviewer-05501:maptile layer not found.check map tile layer name and/or data source name(mvdemo.demo_map)*
When i check the user_sdo_cached_maps view return "no rows selected ".
I have tried many restarts, re-import of mvdemo data but nothing worked.
please help me.
Regards

Thanks Anyway I have found the solution, indeed I was missing the metadata script using @mvdemo.SQL.
I Followed the instructions on the sites given below:
http://gerardnico.com/wiki/spatial/mapviewer/mapviewer_demo_installation
http://www.dbuggr.com/smallwei/step-step-instruction-install-oracle-mapviewer-10g-10-1-3-1/

Invalid SRS when create a map tile layer

Hi,
When i created a map tile layer and submit , it shows “Error creating a new map tile layer: Invalid SRS(spatial referencing system). This might be caused by invalid SRID or no database connection being available to retrieve SRS information.”
And I can't view the map tile which I've created before, it alerts "Cannot get map cache instance config information for MVDEMO.DEMO_MAP. Server response: {1}.
Thanks for any assistance.
a-Li

Are you trying to create a new map tile layer for the MVDEMO sample data set? If that's what you are trying to do, then may I suggest you re-download the latest MapViewer kit (10.1.3.3 for WebLogic, works on any 10g OracleAS and standalone OC4J as well), it includes a refreshed MVDEMO data set, and the best part is it already has the MVDEMO.DEMO_MAP map tile layer created for you (if you follow all the instructions come with the demo data set).
If you still want to create a new map tile layer, then can you please post the exact parameters you entered when creating the new tile layer? Since the MVDEMO data set has a built-in SRID of 8307 (if I remember correctly), you can always use the same SRID (8307) for your tile layer.
thanks

Getting MAPVIEWER-05501 Map tile layer not found error !

I keep getting an error messages basically saying that the application cannot find my
map tile (or map cache) layer. It seems to be looking for it using "datasourceName.CacheName".
I must be usiing the wrong attribute or identifier for this but don't know where to look to
see what it is currently set to.
Looking for a method to trouble shoot this error and fix it.

Look in the MapViewer Admin console's Manage Map Tile Layers page i.e. host:port/mapviewer/faces/admin/admin_ds.jspx
You should see entries for existing data sources and tile layers like
Name Data Source Base map Zoom levels Internal Tile width Tile height Online
DEMO_MAP MVDEMO DEMO_MAP 10 true 256 256 true
If the data source and map tile layer name combination you're using is not there then one has to be created.
Assuming the base map is defined click on Create to create a new tile layer.
If you're using the mvdemo.dmp sample dataset there are an additional step required after importing the dmp file.
i.e. run mvdemo.sql as the map tile layer instances are created by this script.
See mapviewer/fsmc/tutorial/setup.html

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Error loading map chart file - APEX Cloud

I'm getting error message when running a page with a map chart:
Error Loading file:
"http://apex.oracle.com/i/flashchart/anychart_6/swf/maps/europe/israel.amap"
Other maps from Asia, like Yemen, work fine.

Hi,
Thanks for bringing this to our attention. I'll do some investigation to see what's going on. In the meantime, and as a workaround, edit the Map Attributes, switch "Use Custom XML" to Yes, and update the following line in the map XML:
From:
<map_series source="europe/israel.amap"
To:
<map_series source="asia/israel.amap"
...where the path is changed to replace europe with asia.
I've logged bug *15843962* to track this issue, and the fix will be available in our next release. The suggested workaround will do the trick in the meantime.
Regards.
Hilary

Error about mapping with sqlexec when delete data

I've created a sample replication process
There's no problem when i'm inserting data (lookup process is working well too)
but when i'm deleting data from source table it cannot delete record in target table
and this is the error
ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, CC.prm: Error mapping from GG_SOURCE.SOURCE to GG_TARGET.TRG_MAP
and this is code of replicat process
replicat cc
userid gg_target,password oracle
sourcedefs D:\GG\target\dirdef\source.def
map gg_source.source
, target gg_target.trg_map
, def ssource
, sqlexec (id chk_acct
     , query "select account_id_lkp id_out from lkp where account_id_lkp = :id_in"
     , params (id_in = acct_id))
, colmap (USEDEFAULTS
     ,ACCOUNT_NUMBER = ACCT_ID
     ,ACCT_MAP = @GETVAL (chk_acct.id_out));
Could anyone plese help?

Hi Deepshika,
Could you also advice me how u resolved this issue i am also getting same issue...i have also activate MSDTC Service ,Inbound/Outbound allowed & also allowed Distributed transaction in Firewall.
Regards
Shehzad

Error in JMS-Receiver-Adapter when restarting MQ-Channel

Dear all,
we've configured a scenario with a JMS-Receiver (MQ-Series). When the MQ-Channel or the MQ-Queue-Manageris restarted, the connection to MQ get lost and is not re-established even when we restart the communication channel. When we restart the whole J2EE-Server things work fine, but we can't do this in productive environment.
Could this be a configuration issue? How can we solve this?
Kind regards, Stefan

solved by ourselves

I keep getting the message : Error loading Tap to retry, when trying to search in You tube?

Using ipad retina 32gb model MD511B/A
I cannot update software the message Unable to Check for Update. An error occurred while checking for a software update. Cancel or Try Again I have retried many times but it will not do the check? I do not know where to find the ios or version?

Hi johnbpl,
It sounds as if you are having difficulty connecting to the App Store to check for updates for applications on your iPad. If that is the case, I would suggest that you troubleshoot using the steps in this article -
Can't connect to the iTunes Store - Apple Support
Start with the section Troubleshoot issues on an iPhone, iPad, or iPod touch then if needed the section Learn more.
Thanks for using Apple Support Communities.
Best,
Brett L

"Error Loading Operating System" Message on startup. Need Help~~

Hi Peoples,
I got the "Error Loading Operating System" message when restarting widows. Been pulling my hairs off the past few days looking for solutions, but with no dice. anyone have a solution??
I think the problem occurred when my computer got crashed, so I forced to turn off the computer buy hitting the power button, the next time I started the computer and it gives me a "Error Loading Operating system".
I have tried the recommendation from Microsoft by updated the bios. Didn't work.
http://support.microsoft.com/kb/326676
Other solutions that recommended from varied resources, recommanding to set the drive from LBA to Large. But I don't see that option in the Bios setup.. maybe because my HD's was setup as RAID 0?
and other recommended to use a startup disk boot into DOS and use the fixboot/mbr to fix the mbr. But when I tried to boot with a startup disk I can't seems to find my C:\ (which is the RAID 0). How can can boot to the into the RAID?
Any help would be greatly appreciated.
Specs of my computer
CPU: P4 3.0
Mother Board: 875P Neo-LSR/
Graphic Card: Nvidia Quadro FX 1000
Memory: 2 GB
HD: 2X 80 Seagate SATA Drive Configured as RAID 0

Hey Stu, Thanks for your reply. Yes, I think the bios is configured correctly and the Raid is configured as the way it use to be.
About the crashed, last time when I shutted down widow, using the Shut down button in the Start Menu, Window got got freezed and the power is still on, due to frustration I hit the Power button to turn off the computer, the next day I turn on the computer, and it gives me the error message.
<-----------------------------------------------------------------------------------------
I am using Amibios version 3.31a,
Harddrives I have the following:
2X80GB Seagate SATA figured as RAID 0 for C:
80GB Maxtor on Primary ID Master
80GB Western on Primary ID Slave
Samsung CDRW/DVD on Secondary IDE Master
NEC DVD RW ND on Secondary IDE Slave
Bios setting > Intergrated Peripherals > On-Chip IDE Configuration I have the following setting:
On-Chip ATA Operate Mode: Native Mode
ATA Configuration: S-ATA Only
S-ATA Keep Enabled: Yes
P-ATA Channel Selection: Both
Combined Mode Option: P-ATA 1st Channel
S-ATA Ports Definition: p0-1st./P1-2nd.
Configure S-ATA as RAID: Yes
----------------------------------------------------------------------------------------->
PS: Is there a way to boot into the C: (Raid 0 drive) Using Dos? or maybe I can check the files is still in C drive? If the files are there, means the drives are OK? and Maybe I can use the "Fixboot" the problem? Please advise, again thanks for your help.
Thanks.

Can't display a Tile Layer using JAVA API V2 (based on HTML5)

Hi Experts,
I am trying to display a tile layer using JAVA API V2 but i get the below error and nothing shows after that.
MAPVIEWER-05501: Map tile layer not found. Check map tile layer name and/or data source name.
Source: OM.layer.Tilelayer.getTileLayerConfig
*[mvdemo.demo_map]*
I tried with chrome and firefox browsers which supports HTML5 but same issue. Here is the html code i am using
<html>
<head>
<title></title>
<meta http-equiv='Content-Type' content='text/html; charset=UTF-8'>
<script type='text/javascript' src='http://localhost:8282/mapviewer/jslib/v2/oraclemapsv2.js'></script>
<style type= 'text/css '>body {cursor:default;}</style>
<script language="JavaScript" type="text/javascript">
function showMap()
var baseURL = "http://"+document.location.host+"/mapviewer";
var mapCenterLon = -122.45;
var mapCenterLat = 37.6706;
var mapZoom = 4;
var mpoint = new OM.geometry.Point(mapCenterLon,mapCenterLat,8307);
var map = new OM.Map(
document.getElementById('map'),
mapviewerURL: baseURL
var tileLayer = new OM.layer.TileLayer(
"baseMap",
dataSource:"mvdemo",
tileLayer:"demo_map",
tileServerURL:baseURL+"/mcserver"
map.addLayer(tileLayer) ;
navigationPanelBar=new OM.control.NavigationPanelBar();
map.addMapDecoration(navigationPanelBar);
map.setMapCenter(mpoint);
map.setMapZoomLevel(mapZoom) ;
map.init() ;
</script>
</head>
</html>
Note: inside the body on load i use DIV Id = Map (i skipped that one line of code because it stops rest of the line from displaying in the thread)
However, I am successful in using the same tile Layer with JAVA API V1
Please share your thoughts as what could be the fix
Thanks
Nag

Nag,
inside the body on load i use DIV Id = Map (i skipped that one line of code because it stops rest of the line from displaying in the thread)please surround your code with [ c o d e ] [ / c o d e ] (without the spaces).
Secondly: this is probably more appropriate for the {forum:id=727} forum.
Regards,
Stefan

Is there a way to create multiple map tile layers at once?

Hello experts,
I have a small problem. It's mainly a matter of saving some time. I need to create 51 map tile layers in mapviewer, and I would like to this this at one time. I can go to the admin console-->Management-->Manage Map Tile Layers-->Create, and then I can create one at a time. But it really would be nice to create them all at once!
I tried using the XML mode interface, and I can use the following code to create one map tile layer:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request> And it creates one layer. But when I try this:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION_WY"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION_WY"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request>...it creates only the first map tile layer in my xml request.
Is there any way to create multiple map tile layers at once?
Thank you!
John

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped

In SMQ2, i can see a queue stuck giving error:
XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped
when i click it...it leads me to a SXMB_MONI entry..
which corresponds to a IDOC to File scenario, where a message mapping fails giving the following error,
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.OutOfMemoryError</SAP:P1>
<SAP:Stack>"SYSTEM FAILURE" during JCo call. java.lang.OutOfMemoryError</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
If i try to reEXECUTE the LUW from SMQ2, it again shows the error.......
how can i solve the problem without delecting the queue

hi ,
This error is coming because your message is very large or lots of large xsd files are uploaded in XI
you need to increase the memory used by JVM for your XI. How to increase the Memory ? for answer go to this blog.
/people/keerti.nayak/blog/2007/03/05/solving-145out-of-memory146-problem-150-using-jnlp
hope it will sovle the problem...

BEx Broadcasting : Error loading template 0BROADCASTING_TEMPLATE

Hello Everybody,
When i go to Business Explorer - Web Application Designer - Publish and click on In BEx Broadcaster ,an error message is displayed when this is loaded saying :
<b>Error loading template 0BROADCASTING_TEMPLATE</b>
When I tried installing 0BROADCASTING_TEMPLATE an error message was displayed as :
<b>Object Web Template Name 0BROADCASTING_TEMPLATE is not available in version D</b>
This means that 0BROADCASTING_TEMPLATE is not available in delivered version .
Is this any other way to install this template or can this template be separately installed,if yes plz tell me how to do it.If this template cannot be installed separately then,is there no other way to activate BEx broadcasting functionality in BW .Kindly revert back at earliest as I am suffering with this issue since many days.my Email Id is [email protected] .
Thanks,
Saumya

Hi,
Sorry for bothering you - see SAP Note 861803 if of any help.
Symptom
In a BW 3.5 system, you want to define the Standard Web Templates and you call Transaction RSCUSTV11 to do this, however the system displays only the fields "Style sheet" and "Template properties".
Other terms
RSCUSTV11, RSCUSTV21, 0QUERY_TEMPLATE, 0ADHOC, 0BROADCASTING_TEMPLATE, 0ANALZYER, 0QUERY_TEMPLATE_BROADCASTING, 0DOC_TEMPLATE2, standard Web template
Solution
In a BW 3.5 system, use Transaction RSCUSTV21 to maintain the Standard Web Templates.
regards
Vikash

Error loading item GR4Broadcaster.

Hi,
I am getting the following error "Error loading item GR4Broadcaster." when im trying to send a BI Report to the mail.
I am using Durairaj Athavan Raja's Function Module to do so.
Regards,
Virat

On you production BI J2EE Server Execute this below URL as J2EE_ADMIN and paste the result in reply.
<http|https>://<j2ee_server>:<j2ee_port>/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.supportdesk.default
Thanks
SM

Error loading Map Tile Layer when restart

Similar Messages

Maybe you are looking for