Error about retrieving dependency MStudioCommon.2012

I am developing applcaiton based on visual basic .net and I would like to build installation package by installation shield.
However, when I built the setup project, I am getting an error , so i can't build install package.
When I was building setup project,
For example,
ISEXP : warning : -6245: One or more of the project's components contain .NET properties that require the .NET Framework. It is recommended that the release include the .NET Framework.
ISEXP : warning : -6248: Could not find dependent file rscmwgg_64.dll, or one of its dependencies of component Interop.rscmwgg.dll
ISEXP : warning : -6248: Could not find dependent file rscmwgg_64.dll, or one of its dependencies of component Interop.rscmwgg.dll1
Adding merge module 'Visual C++ 10.0 CRT (x86)' that is a dependency of component 'NationalInstruments.UI.Styles3D.dll'
Adding merge module 'Visual C++ 10.0 CRT (x86)' that is a dependency of component 'NationalInstruments.UI.Styles3D.dll1'
Adding merge module 'NI Measurement Studio Visa Support.2012' that is a dependency of component 'WindowsApplication2.exe'
Adding merge module 'NI Measurement Studio Visa Support.2012' that is a dependency of component 'WindowsApplication2.exe4'
ISEXP : error : -4072: Error retrieving dependency MStudioCommon.2012.1C9B2EB5_9E34_4944_BA92_B30CCA4E9205:1033 of C:\Program Files (x86)\Common Files\Merge Modules\MStudioVisa.2012.msm
ISEXP : error : -4072: Error retrieving dependency MStudioCommon.2012.1C9B2EB5_9E34_4944_BA92_B30CCA4E9205:1033 of C:\Program Files (x86)\Common Files\Merge Modules\MStudioVisa.2012.msm
Merging NI Measurement Studio Visa Support.2012: C:\Program Files (x86)\Common Files\Merge Modules\MStudioVisa.2012.msm
I was assuming that compiler couldn't find file " rscmwgg_64.dll". Therefore, I install driver rscmwgg_64. However, i am still getting error.
Therefore, I tried to remove reference of "rscmwgg_64.dll" from my project because I am not using this driver anymore.(but it still doesn't work.)
Therefore, I am assuming that problem might relate with
I am not sure how to solve this problem MStudioVisa.2012.msm(But, not sure about it..)
does anybody know how to solve this error ?
thanks

Hi RgDefined,
Unfortunately, Microsoft dropped support for SetupProject in Visual Studio 2012. SetupProject was the utility used for creating Measurement Studio installers, so when Microsoft made the transition to installShield, Measurement Studio installers no longer installed everything necessary to the target computer (MStudioCommon being one of them). So for the time being, the solution is to use WiX (Windows Installation Experience) Toolset. You can download WiX from the link below. National Instruments is fully aware that this is a problem for several of our customers and plans to have this issue resolved in the next release of Measurement Studio. In the mean time, we have created a KnowledgeBase article that steps through the process of creating an installer in Visual Studio 2012 with Measurement Studio 2013 using WiX. In addition, we ship an example with Measurement Studio 2013 that you can use to get started.
Download WiX
http://wixtoolset.org/
WiX KB: Deploying Measurement Studio Applications with WiX:
http://digital.ni.com/public.nsf/allkb/764B727C9BD2C4C686257C970053D059?OpenDocument
WiX Community Example:
https://decibel.ni.com/content/docs/DOC-36168
If you run into any problems, I would recommend consulting our forums at forums.ni.com or creating a service request at ni.com/support. Have a great day!
Kelsey W.
National Instruments
Applications Engineer

Similar Messages

The cluster resource could not be brought online due to an error bringing the dependency resource

hello
i am tring to install sql 2012 sp1 clyutering on Windows server 2012. every thing is fine until a get this error
The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)' online. Refer to the Cluster Events in the Failover Cluster Manager
for more information. i don,t have permision issue.
any help for this please
Kamel
KAMEL

Hello,
Please read the following post:
http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx
Try to run the cluster validation wizard too:
http://technet.microsoft.com/en-us/library/cc732035(v=WS.10).aspx#BKMK_how_to_run
More about this topic on the following thread:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/d217a651-1209-4300-904a-aefe0e05692c/network-name-not-going-online-during-install
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

[SOLVED] Pacman error: failed retrieving file : No address record

I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a network connection and being able to ping any site from the cli.
After installing, I am still having the same problem. The laptop is plugged in via ethernet, and I can ping any site I want, but a call to pacman -Syyu just returns numerous errors such as
error: failed retrieving file 'core.db' from mirror.rit.edu : No address record
And just as a test, I was getting replies when pinging mirror.rit.edu.
Last edited by process91 (2011-11-18 18:21:17)

Try the following steps:
1 - Set the VirtualBox Networking option to NAT
2 - Start the arch machine in the VirtualBox
3 - Edit /etc/rc.conf as a dynamic IP:
HOSTNAME="arch"
interface=eth0
address=
netmask=
broadcast=
gateway=
4 - Run dhcpcd
5 - Try to ping a couple of sites, or your router
If you still can't ping or anything, I suggest you start a new thread specifically about your problem. Include the output from "ipconfig -a". You're not going to get much help from posting in a thread marked "[SOLVED]".
Last edited by process91 (2012-01-18 07:21:14)

Error while retrieving bulk data from mdm in staging server

I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PM

Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

Error in retrieving user list for a particular group in CMC (BOXI R2)

The following error message is shown
"There was an error while retrieving data from the server: Failed while trying to get role member list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetChildrenInternal(). Error code: 2. Description: NO_AUTH."
Is the problem on BO side or R/3 side?

hi,
I assume we are talking about the CMC / SAP Authentication area.
The user entered here needs to have specific authorizations assigned. Please look at the installation guide for the SAP Integration Kit which lists those authorizations.
thanks
Ingo

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Pacman - error: failed retrieving file

Hi.
I just installed Arch on my new laptop but when I first got to the stage where you need to use pacman for the first time, I got this error:
error: failed retrieving file
for all the mirrors I have uncommented in my /etc/pacman.d/mirrorlist with reasons like "Not found", "File unavailable" or "Service not available".
I've tried several mirrors (all french mirrors and some others) but I got the feeling that it's more coming from my computer.
I first got this error when I tried to install Xorg, but it's the same when I try with someting else (I tried Firefox for instance). Some packages are downloaded but some aren't and so, I can't install anything.
I've checked my internet connexion which seems to work since I have 0% loss when I ping something.
I've also tried pacman -Syy but it didn't fix it.
So, I'm asking for your help, since I never had any problem at this stage of the installation before.
And by the way, I'm running on a VAIO laptop with Arch x86_64 installed via network an I used DHCP during the install.
Thanks

I don't think so, since I added nothing after installing. Unless there is a firewall in the hardware (I don't know anything about that). My computer is a Vaio VGN-SR and this morning, I was able to install both cpudyn and acpid on the first try.
And I installed Arch before with the same internet connexion and there was no problem so it must be the computer.

Error during retrieval of the logon data store

Hi guys,
well after checking and changing RFC-Destination we are not able to resend stucked data in Monitor. We still get the error Error during retrieval of the logon data store
What can we do to solve the issue?!
br

Hi, well we did this and got:
if_http_client send http_communication_failure
Therefore i checked SM59 INTEGRATION_DIRECTORY_HMI and the user-pw was invalid?! How comes?!
We changed it, new cache refresh - but still we are not abel to resend the messages!
br
Edit:
in Monitor we get this error:
+ <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with Q01CLNT100 System-dependent data for entry /RFC/Q01CLNT100 ch FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 /> +
Seems to me like role problems we once solved!

Cannot sync pacman; error: failed retrieving file, No address record

Hello,
As a heads up, I'm trying not to repost
I've searched the forums but found nothing, I'll keep looking. I've read the front page news about the mirrorlist and tried using the old mirrorlist file. I've been on #archlinux on IRC. Nothing yet.
Here is an example of what I see:
root@dungeon pacman.d # pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update core (No address record)
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update extra (No address record)
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update community (No address record)
error: failed to synchronize any databases
I've commented out all but one of the servers in the mirrorlost file to shorten the output.
Any ideas?

Snowman wrote:You are trying to fetch non-official dbs which are not on the Arch Linux mirrors. Are you using Chakra? Post your pacman.conf
no I am using normal Arch, and it was working fine until i updated on tuseday. I am using "yaourt -Syu --aur" to update.
My actual pacman.conf is (changed automaticly to this within unsuccesfull update yesterday):
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
[core-testing]
Include = /etc/pacman.d/mirrorlist
[desktop]
Include = /etc/pacman.d/mirrorlist
#[desktop-testing]
#Include = /etc/pacman.d/mirrorlist
[platform-testing]
Include = /etc/pacman.d/mirrorlist
[apps]
Include = /etc/pacman.d/mirrorlist
#[apps-testing]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
NOW I tried the saved pacman.conf (wich worked fine for months) wich is like this
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
#ArchAudio
# tried and tested packages
[archaudio-stable]
Server = http://repos.archaudio.org/stable/x86_64
#ArchAudio
# these are..for testing?
[archaudio-testing]
Server = http://repos.archaudio.org/testing/x86_64
#ArchAudio
# for your pleasure
[archaudio-experimental]
Server = http://repos.archaudio.org/experimental/x86_64
and tried to update with it using pacman, wich doesn't succed also:
[studio@myhost ~]$ sudo pacman -Syu
Senha:
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
:: Sincronizando a base de dados de pacotes...
erro: falha ao atualizar core (nenhum servidor configurado para o repositório)
erro: falha ao atualizar extra (nenhum servidor configurado para o repositório)
erro: falha ao atualizar community (nenhum servidor configurado para o repositório)
archaudio-stable está atualizado
archaudio-testing está atualizado
archaudio-experimental está atualizado
:: Iniciando atualização do sistema...
atenção: bristol: local (0.60.5-1) é mais novo que archaudio-testing (0.40.8-1)
atenção: fil-plugins: local (0.3.0-4) é mais novo que archaudio-testing (0.3.0-3)
atenção: guitarix: local (0.11.0-1) é mais novo que archaudio-testing (0.06.0-1)
atenção: kernel26rt: local (2.6.33.7_rt29-1) é mais novo que archaudio-stable (2.6.31_rt10-4)
atenção: lash: local (0.6.0~rc2-3) é mais novo que archaudio-testing (0.6.0~rc2-1)
atenção: ll-plugins: local (0.2.1-4) é mais novo que archaudio-testing (0.2.1-3)
atenção: lv2-c++-tools: local (1.0.3-1) é mais novo que archaudio-testing (1.0.2-1)
atenção: lv2vocoder: local (1-4) é mais novo que archaudio-testing (1-3)
atenção: rakarrack: local (0.5.8-1) é mais novo que archaudio-testing (0.4.2-1)
atenção: rev-plugins: local (0.3.1-3) é mais novo que archaudio-testing (0.3.1-2)
atenção: swh-lv2: local (1.0.15-3) é mais novo que archaudio-testing (1.0.15-2)
não há nada a fazer
[studio@myhost ~]$
!!!all messages are in portuguese but I think it is possible to understand them, if not i will translate
EDIT:
OK, I undestand the last problem and I changed my mirrolist from
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
Server = http://archlinux.limun.org/$repo/os/$arch
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
to
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://archlinux.c3sl.ufpr.br/$repo/os/x86_64
Server = http://archlinux.limun.org/$repo/os/x86_64
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = http://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
and now it's working again
but I don't understand how this all happened
AND: how can I force reflector to output a correct mirrorlist for 64bit?
Last edited by capoeira (2010-08-12 15:18:15)

IPV6 issues during the installation? "error: failed retrieving file"

Hi!
I currently try to install Arch on my Notebook using the Newbie Guide from the German Arch Wiki. Everything seemed to work fine until I got to the point of installing the base system using
pacstrap /mnt base base-devel wpa_supplicant
. The downloading process fails and returns about the same error message for every mirror:
error: failed retrieving file 'core.db' from MIRRORNAME : Resolving timed out after XY milliseconds
I already tried to use different mirrors, but none of them worked. I tried to reach them on another machine via the browser and could access them, so they're definitly up. It therefore could be my internet connection, but I'm connected via an ethernet cable and can ping e.g. google.com or archlinux.org without any problems. I looked up the issue on different forums and almost everyone said that it's an issue caused by ipv6; I tried different workarounds, but none of them worked since most of them were used on an Arch system that was already installed but had problems with pacman. Due to the fact that I'm encountering this problem on a CD that I try to install Arch with, most of the files I'm supposed to edit to disable ipv6 aren't there (yet?) - and the other workarounds just didn't work. I really want to install Arch on my system, but can't continue with the installation when pacman can't reach the mirrors.
I therefore need your help to solve this; like I said, it's probably an issue with ipv6, but I just can't find out how to disable it on my installation medium (I burned the archlinux-2014.11.01-dual.iso on it, if that matters).
Last edited by Nex (2014-11-15 15:05:06)

run ping6 -c 4 google.com and post the output.
alss post the output of :
ip addr
ip route -4
ip route -6
Last edited by Lone_Wolf (2014-11-15 16:37:13)

How do I go about retrieving colour names?

Hi
I have been trying to retrieve the used colours from a indesign CS4 document via it's XMP meta data using Exiftool, so far Exiftool has helped me retrieve all the xmp data, and with the help of Shane Stanley I have managed to retrieve 1 colour from the result returned, my question is how do I go about retrieving the rest of the colour names?
the result for this example should return: Black, Keyline, Paper, Registration.
Exiftool:
http://www.sno.phy.queensu.ca/~phil/exiftool/
this is a sample of some of the XMP data returned using this code with Exiftool installed:
set p2f to "/Users/Budgie/Desktop/TEST-PROOF" --POSIX path to file
do shell script "/usr/bin/exiftool -XMP -b" & space & quoted form of p2f
set theData to " <rdf:li rdf:parseType=\"Resource\">
<xmpG:swatchName>Black</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>0</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>100</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType=\"Resource\">
<xmpG:swatchName>Keyline</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Spot</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>100</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>20</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType=\"Resource\">
<xmpG:swatchName>Paper</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>0</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>0</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType=\"Resource\">
<xmpG:swatchName>Registration</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>100</xmpG:cyan>
<xmpG:magenta>100</xmpG:magenta>
<xmpG:yellow>100</xmpG:yellow>
<xmpG:black>100</xmpG:black>
</rdf:li>
</rdf:Seq>
</xmpTPg:Colorants>
<xmpTPg:Fonts>
<rdf:Bag>"
set oldDelims to AppleScript's text item delimiters
set AppleScript's text item delimiters to {"<xmpG:swatchName>"}
set partData to text item 2 of theData
set AppleScript's text item delimiters to {"</xmpG:swatchName>"}
set swatchName to text item 1 of partData
set AppleScript's text item delimiters to oldDelims
return swatchName
-cheers
Budgie

Hello
You may try something like this.
Cheers,
H
set t to " <rdf:li rdf:parseType="Resource">
<xmpG:swatchName>Black</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>0</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>100</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType="Resource">
<xmpG:swatchName>Keyline</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Spot</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>100</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>20</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType="Resource">
<xmpG:swatchName>Paper</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>0</xmpG:cyan>
<xmpG:magenta>0</xmpG:magenta>
<xmpG:yellow>0</xmpG:yellow>
<xmpG:black>0</xmpG:black>
</rdf:li>
<rdf:li rdf:parseType="Resource">
<xmpG:swatchName>Registration</xmpG:swatchName>
<xmpG:mode>CMYK</xmpG:mode>
<xmpG:type>Process</xmpG:type>
<xmpG:cyan>100</xmpG:cyan>
<xmpG:magenta>100</xmpG:magenta>
<xmpG:yellow>100</xmpG:yellow>
<xmpG:black>100</xmpG:black>
</rdf:li>
</rdf:Seq>
</xmpTPg:Colorants>
<xmpTPg:Fonts>
<rdf:Bag>"
getTaggedData({"<xmpG:swatchName>", "</xmpG:swatchName>"}, t)
on getTaggedData({x, y}, t)
string x, y : block start tag, block end tag
string t : source text
return list : list of matched data -- [1]
[1] This handler does not support nested blocks.
(Only the inner most block will be retrieved if nested.)
script o
property tt : {}
property uu : {}
property rr : {}
property astid : a reference to AppleScript's text item delimiters
property astid0 : astid's contents
try
set astid's contents to {x}
set tt to t's text items
set astid's contents to {y}
repeat with i from 2 to count my tt
set uu to my tt's item i's text items
if (count my uu) > 1 then -- y found after x in this segment
set end of my rr to my uu's item 1
end if
end repeat
set astid's contents to astid0
on error errs number errn
set astid's contents to astid0
error "getTaggedData(): " & errs number errn
end try
return my rr's contents
end script
tell o to run
end getTaggedData

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Error while retrieving a password for credential

Hi All,
I am getting following error while deploying ADS application.
Please help me to resolve it.
NWDS 04s.
Adobe Version 7.02
error:
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: ADS Render Exception occured. Append "sap-wd-errorPdf=true" to the URL and access the application once again. This time you will get an error PDF. Save the error PDF on the file system. This is a helpful attachment in case of an OSS message. com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights: java.lang.Exception: Could not retrieve a password for credential: ReaderRights Exception Stack Trace: com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights: java.lang.Exception: Could not retrieve a password for credential: ReaderRights at com.adobe.ads.request.UsageRights.execute(UsageRights.java:202) at com.adobe.BaseADSRequest.doWork(BaseADSRequest.java:111) at com.adobe.AdobeDocumentServicesWorker.execute(AdobeDocumentServicesWorker.java:758) at com.adobe.AdobeDocumentServicesEJB.processRequest(AdobeDocumentServicesEJB.java:130) at com.adobe.AdobeDocumentServicesEJB.rpData(AdobeDocumentServicesEJB.java:108) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at

Hi,
did you provide your credential during the Adobe installation process (as far as I know, you have to install the Adobe Document and not only deploy these).
You have to provide the credential and enter a password during the process, or it does not work.
The last info I have is that you get credentials by entering a customer request at SAP, component BC-SRV-FP, but that might have changed...
Kind regards,
Carl

Need Urgent help Error while retrieving a password for credential: ReaderRi

I am receving the following error while deploying my web dynpro application containig a adobe form .The issue is that when i perform teh following test
Enter the following URL in the browser
http://<server>:<port>/AdobeDocumentServices/Config
The web page of the web service AdobeDocumentServices is displayed. Choose Test.
Choose rpdata(test)
Choose the Send button without entering any parameters
Enter the user name and password
User Name: ADSUser
Password: <Your admin password>
Choose Submit
I get the version number
but when i deploy the application i get this eror
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:398)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:342)
     ... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
Processing exception during a "UsageRights" operation.
Request start time: Wed Oct 03 14:43:25 PDT 2007
com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights

Hi Namit,
Have you installed a credential file to your ADSServer?
This is required to apply the usageRights onto the PDF.
You need to install the ReaderRights credential file. Follow the steps from this URL:
Re: Interactive form application error
Make sure that the password and the expiry date of the ReaderRights credential file are valid.
Hope this helps.

Error about retrieving dependency MStudioCommon.2012

Similar Messages

Maybe you are looking for