Error about the dll crdb_dao.dll - In Event Viewer - Application log

We have classic ASP application and we are using Crystal XI for reports viewing and printing. We are keep getting the following error logged in the event view application log.
Faulting application dllhost.exe, version 5.2.3790.3959, faulting module crdb_dao.dll, version 11.0.0.1282, fault address 0x0001b130.
What is Causing this error. When this happens, the components stops responding and we have re-start the server.

Hi ABC,
CR XI is past it's patch life cycle so all I can suggest is you download the last Service Pack and test again. If it still happens then you can update to XI R2 and try again.
You can get to downloads from here: http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
And to upgrade go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Thank you
Don

Similar Messages

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Invitation Error: Only the Organizer can change this event

After doing a clean install of Snow Leopard on my MacBook Pro, I was getting the following error when trying to edit some iCal events:
Invitation Error: Only the Organizer can change this event
The iCal events that I couldn't edit had all been ones where I had sent invitations to someone else. When I double clicked them to attempt to edit them, I received a popup that would allow me to accept/decline the event, but not edit it. I noticed in the popup that it had the email address of the original invitee plus my own email address. I'm sure that my own email address wasn't there before.
I took a look at "My Card" in address book and it only had my name and no email addresses.
After the install I had synced iCal and Address Book with MobileMe. The sync said there was a conflict with my Address Book entry and I accepted the one from MobileMe, thinking I hadn't put anything in the one on my laptop yet anyway. I ended up with the original of my Address book entry, but not marked as "my card" and an entry with just my name marked as "my card".
When I merged the two cards and made sure the resulting card was marked as my card, I could then edit the iCal events. I think it was the fact that "my card" now had my MobileMe / .Mac email address in it that allowed me to edit the iCal events.
So if you're having this problem editing events, check your My Card in Address Book and make sure it has the appropriate email addresses in it.
- David
PS - There was an earlier post with this topic, but it didn't mention this solution. I would've replied to that post but it had been archived and replies were not allowed.

I have found a way around this. If you drag the event to your desktop, it will create an .ics file. If you open this file in TextEdit, you can delete the line that begins with ORGANIZER:. Save the file and bring it back into iCal. iCal will now assume you are the organizer, allowing you to edit. You may also want to delete the other attendees in TextEdit, as iCal will also want to send updates if you make changes to the file (because it thinks you're the organizer making changes to your own calendar event).
This isn't an ideal solution, but it lets you make the edits. Hopefully Apple will change this in a future Leopard update or in Snow Leopard.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

Whatsapp does wanna open it gives an error about the firewall

Just downloaded the new whatsapp, after putting in my number it gives
Out a message about whatsapp that it has attempted to open a connection
Inside the firewall which is not allowed. Then its gives an error about java.lang.securityexception: permission denied..please help cause previously whatsapp was working fine

The firewall option to disable it or enable it is locked it has a red lock I don't know how to remove it so I can disable the firewall

How to make a .exe without errors about the costum scaling

Hello everybody,
i'm new with Ni-Labview,
i'm trying to make a .exe file of my application, this is working perfect, but if i make costum scales in my Daq Assist options and i make the vi in a .Exe then there are always errors if i open it on another computer... if i put every Daq Assist box to the ''no scale'' option, then the exe is working on another computer...
it is working good on the computer where i build the vi on...
but of coarse i'm not planning to put the hole software (labview) on that other computer... that's where the .exe file is for i guess...
i have 1 Daq Assist that is programmed with a scale that converts 0-5 volts to 0-3000(rpm) this is a output voltage
and the other daq assist box is programmed with a scale that 0-1volts is 0-3000(rpm) this is a input voltage
everything is working like i want it to work on my computer where i build the application, but if i make a .exe file of it, including all the Daq Mx drivers and so on then this file is not working.... so i made a error box at the end of the daq assist to see what is happening and if i open it then on another computer then it tould me that there where errors with the scaling i made... but i don't see the problem????
is anyone having this problem also? or maybe i do something wrong???? i really don't know how to solve this problem... and it should not be that hard,... i'm sure of it....
hope someone could help me....
i use a Ni-USB 6211
thanks for reading this and hope to hear something soon!
thanks
Kind Regars,
Kris

Hello There,
i have one more question that i can't figure out....
i have a vi in attachment that you can open hopefully....
in the block diagram you see 1 Dial, this is the left dial in the screen... now this is the setpoint of the PID regulator..
what i want is a Analog input to be the Setpoint of the PID Regulator Also... i prefer to have little button or something so i can choose what i use , or the Dial on the computer(with the mouse) Or a Analog input from external device 0-10V input
i have try'd a lot of things but the only thing that is everytime popping up:
Possible reason(s):
NI Platform Services: The specified resource is reserved. The operation could not be completed as specified.
i can't solve it..... is there anybody who have an idea how to put things straight and working?
Thanks!
Kind Regards,
Attachments:
PWM Module TEST1.vi ‏117 KB

I tried updating my iphone on monday but after updating, it was showing me an error about the phone coukld not be activated because the activation server is unavailable. what do i do please help out.i tried updating my iphone on monday but after updating,

i updated my iphone software on monday and as it was updating back it stopped and showed an error that the activation server is unavailable and that i should try again after some time i have been trying since monday but all to no avail i still get the same message again. kindly help out on wat to do.

This message usually indicates that your phone has been hacked/modified or jailbroken.
Was your phone ever locked to a different phone carrier? IF it was how did you unlock it?

Error about the Makefile of the demo of ttclasses[Aix]

when I try to compile the demo of ttclasses,I get these message and
the makefile stop.the OS is AIX,and the timesten was install in non-root type
by the user of timesten.
[mawx@cdr2 ttclasses]$pwd
/cdr2/home/mawx/demo/ttclasses
[mawx@cdr2 ttclasses]$make
make: 1254-002 Cannot find a rule to create target obj/testprog_utils.o from dependencies.
Stop.

Hi Chris,
AIX Version 5.3,I am trying to build 64-bit.
I used the compiler xlC_r.and I have no change anything about
the Makefile which the demo give it to me.
steven
Message was edited by:
StevenMa

Urgent!!Error in the front end when trying to view a report

Hi All,
I am getting this error when I am trying to view a report in the front-end.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Please let me know if you have any ideas.
Thanks.
Vinay Sai Konduru

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

BAM Error - during the creation of BAM Activity and View in EXCEL

I'm getting an error "The Cube could not be created successfully. Please edit the view and validate the inputs" during the creation of BAM Activity and VIEW in MS Excel for BAM
Error Details:
Error Description:
The following system error occurred: Invalid class string .
Error Source:
Microsoft OLE DB Provider for Analysis Services 2008.
Please help me in resolving the issue. Thanks in Advance!!

Hi Ramesh,
Below link has the information related to all the prerequisites for using BAM Add-In for Excel.
Kindly ensure that you have all the files in place before creating BAM Activity and View.
http://msdn.microsoft.com/en-us/library/aa560476.aspx
Rachit
Please mark it as Answer if this answers your question

Event viewer filtered log not exported correctly

Hi all,
I have a very strange problem, or better, I'm missing something.
I can open the event viewer and there are many events in there (45'000). I can filter for the last 7 days and this shows me only 1925 events which is correct.
Now, if I click on SAVE FILTERED LOG FILE AS, I can save the file in XML or TXT format (or others). It's not important the format because the export is incorrect! What I mean is that once the file has been exported to a TXT or others file's format, it contains
just some events, in this case maybe 50-60 events, not more! The strange thing is that in that file I can see ONLY the events from the most recent day in the filter (right now the 14 of june).
Now the funny part: if I save THE SAME LOG as .XML, it doesn't show all the events, but more than the TXT file (in this case, it shows until the 2nd of june), but the last event on the filtered event viewer, is on 13 may.
I hope somebody can help me, and excuse me for my explanation.

Hi ripp3r,
Thank you for your post.
I test to save event log following your description with same result. When I save log to evtx format file, the log show correctly.
Then I find KB2417105 (for Windows 2008) to express that logs are truncated because the saving event log operation is not synchronized appropriately with the fetching-event operation.
When I installed the KB2417105, event log saved to txt file successful.
If your server OS is Windows 2008 R2, please install
KB981466.
If there are more inquiries on this issue, please feel free to let us know.
Regards,
Rick Tan

How to get event's application log handle for application log mssg

Hi,
I would like to get the application log handle for an event call, can someone pls help.
Rgds.

Hello wong ,
Did u get the solution for this respective query.
if so can u please send it to me also .
i am struck over with the similar problem.
Thanks,
pavankumar.

When booting Windows 7 I get an error about mozsqlite3.dll missing

I can click through the popup and everything works fine. Getting the same error every time I boot the system.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

The error about the workflow

Hi,my experts:
   SRM5.0 ,ECS,
In my case ,I want implement the spending limit workflow to replace the one-step and two-step approval workflows. I want my worflow like this:Output limit not exceeded - start 0-step-approval workflow;Output limit exceeded - start 1-step-approval workflow;
I config the workflow like this:
1、Deactivate the event linkage for the workflowsWS10000129 (one-step approval)、 WS10000031 (two-step approval)、 WS10000060 (0-step approval).
2、Activate the event linkage for the workflow WS10000276 (spending limit)；
3、condition for workflow ：
          WS10000276：ReqtCovRequest.TotalValue>ReqtCovRequest.SpendingLimitofRequester
                  WS10000060：ReqtCovRequest.TotalValue <= ReqtCovRequest.SpendingLimitofRequester
4、PPOMA_BBP ：EMPLOYEE －output limit：100 usd.
                                                     － SLAPPROVER ：USMANAGER
Now,When I one shopping cart with value 80 usd，But the SC still need to be approvaled by MANAGER.I want to know why?
BR!Thanx!
Alex

Hi,
I think it is not an error.
Go to BBP_PD and check which workflow template is started.
Go to SWO1 transaction, and enter Business Object BUS2121 and select test.
Select create instance and give SC number. You can check the value of ReqtCovRequest.TotalValue and ReqtCovRequest.SpendingLimitofRequester.
Go to SWD_COND and check the start condition.
Regards,
Masa

Error about the dll crdb_dao.dll - In Event Viewer - Application log

Similar Messages

Maybe you are looking for