Error after update/install

At the end of updating Numbers, the App Store shows "An error has occurred" in red text next to the app in the "Purchases" tab. However it does not say anything else about what went wrong. In the Finder the app icon is displayed with an empty progress bar and an "x" button. The app seems to have been updated ok and it actually runs. However the error message and bad app icon remain. I have trashed the app and installed again and got the same problem again. I have seen this happen with other apps as well such as iMovie but other apps install and update without problem. The only thing I could find in the system logs is the following error message, I don't know if it is actually related to the problem:
installd[1439]: postinstall: shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
Does anyone have any idea what is going on?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

Similar Messages

  • There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
    BTW Thank you,

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

    File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
    Hi all,
      im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
    In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
    <i>Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
    ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,</i>
    Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
    - Deactivation/Activation of File Adapter channel
    - check that user XIISUSER is not locked
    - checked SXI_CACHE (it seems ok)
    - Many CPA full refresh
    - Dummy modifications of File Adapter channels (a dummy modification of the description)
    - Reboot J2EE
    I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
    Thank you
    Manuel

    Hi Prabhu,
      I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
    This is the error log from message monitoring:
    <i> 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
    2007-01-16 16:37:34 Success Send binary file  "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
    2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
    2007-01-16 16:37:34 Success Trying to put the message into the send queue.
    2007-01-16 16:37:35 Success Message successfully put into the queue.
    2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
    2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
    2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
    2007-01-16 16:37:35 Success The message status set to DLNG.
    <b>2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
    2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. </b>
    2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
    2007-01-16 16:37:35 Success The message status set to WAIT.
    2007-01-16 16:42:35 Success Retrying to send message. Retry: 1</i>
    After this, the system try to resend the message, and the same error appears several times.
    Ty,
    Manuel

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • Netflix plug in error after lion install

    What is the fix for Netflix plug in error after lion install?

    I reinstalled the plugin from a Netflix email, still get this problem:
    I don't have private browsing on, by the way.

  • IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

    Does any experience this problem after updating to ZCM11sp1?
    I keep getting IE8 unsupported error after updating to ZCM 11 Support
    Pack 1 (11.1) although I am running on IE8 already. Now remote
    management is not working because of this incompatible browser errors. I
    tried this following
    link:http://www.novell.com/support/viewCo...9158&sliceId=1
    But it does not help.
    Any suggestion or idea would be greatly appreciated!!!

    On 8/29/2011 8:26 AM, craig wilson wrote:
    > Double Check all of your settings there, including the option to view
    > Intranet sites in compatibility mode.
    >
    > For some reason, your IE8 is reporting itself as IE7 and running in IE7
    > mode which is no longer supported.
    >
    > On 8/29/2011 9:17 AM, April wrote:
    >> Does any experience this problem after updating to ZCM11sp1?
    >>
    >> I keep getting IE8 unsupported error after updating to ZCM 11 Support
    >> Pack 1 (11.1) although I am running on IE8 already. Now remote
    >> management is not working because of this incompatible browser errors. I
    >> tried this following
    >> link:http://www.novell.com/support/viewCo...9158&sliceId=1
    >>
    >>
    >>
    >> But it does not help.
    >>
    >> Any suggestion or idea would be greatly appreciated!!!
    >
    >
    Thank you for your responding. I have already checked to view Internet
    sites in compatibility mode with no luck. I tried several different
    computers with IE8 but they all got the same problem.

  • Error after updating kernel 640U patch to 247

    Hi Forum,
    There are some repetitive errors after updating kernel 640U patch to 247:
    ======================================================
    X Sun Feb 22 07:01:01 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    X Sun Feb 22 07:01:08 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    X Sun Feb 22 07:01:19 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    ======================================================
    Please help.
    Regards,
    Agoes
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AM

    Hello Agoes,
    You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
    Please refer to not 1239685 for more info
    So no issues
    cheers
    Rohit

  • .wav error after update

    This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
    Anyone know why this error is occurring and how I can get it to play the .wav files again?
    Thanks, 

    Hello,
    I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
    Upgraded Extensions
    Oracle Microsoft Access Browser version 1.1.3.27.66
    Oracle SQL Developer - Snippet version 10.1.3.27.66
    Oracle SQL Developer version 1.1.3.27.66
    Oracle SQL Developer - Reports version 10.1.3.27.66
    Oracle SQL Server Browser version 1.1.3.27.66
    Oracle MySQL Browser version 1.1.3.27.66
    Oracle SQL Developer - Worksheet version 10.1.3.27.66
    Oracle SQL Developer - Extras version 1.1.3.27.66
    Oracle SQL Developer - SearchBar version 10.1.3.27.66
    Oracle SQL Developer - Object Viewer version 10.1.3.27.66
    I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
    As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
    Mark

  • Error after update Oracle SQL Developer Migration Tools

    Hi,
    I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
    This error appear when it´s restarting:
    Exception Stack Trace:
    java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
         at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
         at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
         at java.net.URL.getURLStreamHandler(URL.java:1106)
         at java.net.URL.<init>(URL.java:393)
         at java.net.URL.<init>(URL.java:283)
         at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
         at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
         at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
         at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
         at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
         at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
         at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
         at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
         at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
         at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
         at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
         at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
         at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
         at oracle.ide.layout.Layouts.activate(Layouts.java:784)
         at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
         at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
         at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
    Anyone knows why that is happining?
    Thanks in advance,
    Felipe.
    Message was edited by:
    felipe.b

    Hello,
    I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
    Upgraded Extensions
    Oracle Microsoft Access Browser version 1.1.3.27.66
    Oracle SQL Developer - Snippet version 10.1.3.27.66
    Oracle SQL Developer version 1.1.3.27.66
    Oracle SQL Developer - Reports version 10.1.3.27.66
    Oracle SQL Server Browser version 1.1.3.27.66
    Oracle MySQL Browser version 1.1.3.27.66
    Oracle SQL Developer - Worksheet version 10.1.3.27.66
    Oracle SQL Developer - Extras version 1.1.3.27.66
    Oracle SQL Developer - SearchBar version 10.1.3.27.66
    Oracle SQL Developer - Object Viewer version 10.1.3.27.66
    I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
    As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
    Mark

  • After updating, install error "Install Flash Player.exe - Entry point not found"

    My current version of Flash Player is: 11.1.102.55. Then after an Update is performed and the download is downloaded, then it tries to install the download and an error message occurs. The error message says - Install Flash Player.exe - Entry point not found - then it says The procedure entry point  SetDllDirectoryW could not be located in the dynamic link library KERNAL32.dll.
    When I try to uninstall Flash Player I get the same error message above except that it says Uninstall_Flash_Player.exe instead of Install Flash Player.exe.
    I'm running WIN2000, my current version of Flash Player is 11.1.102.55 and I’m running Firefox version 12.0.

    I believe 10.1.102.64 was the last supported version of Flash Player for Win2k.  That being said, there have been numerous users that have been able to work around the error you are receiving.  Please see this post for details:
    http://forums.adobe.com/message/4218334#4218334

  • Booting error after post-install update [Solved]

    hi
    Been using Linux for a while, but wanting to learn rather than just use, so decided to give Arch a go, after the review in LinuxMagazine.
    Managed to install and boot into it after a few trial and error.
    Ran "pacman -Syu"
    pacman updated itself, then ran into the hotplug conflict. I took it from This thread that it was safe to accept to remove hotplug.
    Ran "pacman -Syu" again 
    I then ran into the the error:
    error: the following file conflicts were found
    grub: /usr/share/grub: exists in filesystem.
    Followed This thread and did
    phrakture wrote:'mv' /usr/share/grub to something like /usr/share/grub-backup
    Ran pacman -Syu again, this time, it ran properly (I think)
    Rebooted the computer, ran into  a kernel panic:
    UFS: unable to mount root on unknown-block(0,0)
    . Followed This thread and  the wiki and edited the instruction on Grub's boot screen to set
    root=/dev/hda1 ro
    and added
    initrd /initrd26.img
    to the line uderneath.
    this allows me to boot (sort off), but I then get the following error:
    /bin/sh: can't access tty; job control turned off
    From there, I get what seems to be a limited shell (get the "#" sign but not the location I am in such as "root@archbox:#" which I would expect). Here, I am snookered. If I search the wiki for this message, I get one article which refers to Cups and is not relevant to the issue, as far as I can tell, and I do not get any joy from the forum either.
    Reinstalling the system is not a problem, but I would rather understand what is happening before I do it, so that I can fix it if the issue reappears, and because it fits into the "learning" purpose of installing this distro.
    Could someone guide me on my next step?
    Thx
    Damien

    tomk wrote:Change initrd26.img to initrd26-full.img, and you should be able to boot. When you're up and running, have a look at the wiki page on initrd for more info.
    Thanks, that did it. Thought I had tired that as well, though, must have been tired and made some typos.....
    On a sidenote, it seems that after the install, there was "/dev/discs/disc0" then came the partitions: part1; part2; part3, which is now translated as hda1; hda2; hda3.  I thought partitions started with hda0..  Am I wrong or is the way Arch auto-prepares the hard drive just skips the 0 partition?

  • XL Reporter gives Error after updating from PL 25 to SBO 2005 B PL 38

    Thnaks Shridhar,
    I have tested it in PL 38, its work fine but it has occoured one more problem i.e. XL Reporter is not working now.
    However I have updated XL Reporter to PL30, but it gives error.
    It has reamed used userdefined fields of the report. I have correct it too. But it gives error " Expansion has problem ".
    Can any body has idea for running XL reporter successfully after updating patch level.
    Can any one has faced this error or have solutions.
    Pl. Help. so that i can updating it to Final Live Database.
    Warm Regards,
    Chintesh Soni

    Hi..Shridharan,
    Thanks for reply and guidance....!!
    But I have successfully installed the XL Reporter means upgraded.
    Now, When I am running existing reports which are preapred in previous version, is not running. It gives error i.e. Expansion has problem.
    B4 this error, it has shown me some other error for user defined field was not found, when i have checked, the upgradation of patch level has changed the name of UDFs.
    I have modified the udf names in the report.
    Can u identify wht is the problem exactly please..
    With Warm Regards,
    Chintesh Soni

  • Fpga code generation error after updating from 8.5.0 to 8.5.1

    Hi All,
    I have a FPGA-VI which was compiled in LV 8.5.0 without errors. After I updated to 8.5.1 the Code Generation stops, telling me the clock domain is not supported for write FPGA I/O node (see attachment).  Also I attached a picture of a simplified FPGA-VI which brings up the same error.
    I use a PXI-7833R connected to a cRIO-9151 R Series Expansion Chassis with a NI-9421 modul (8-ch DI, 24V) installed in it.
    My original FPGA-Code has a theoretical maximum of 22MHz, so I can't change the clock domain to 40MHz.
    Do you have any suggestion how to get the VI compiled?
    Uli
    Solved!
    Go to Solution.
    Attachments:
    ErrorMessage1.jpg ‏30 KB
    FPGA-VI1.jpg ‏17 KB

    Hi Ruhmann, hi Basset Hound,
    thank you for your reply and giving me a better insight in things.
    I started my VI with 40MHz clock domain. The Vi got bigger, some more logic here and some more code there. Finaly the compiler couldn't satisfy the timing any more. Instead of optimising the code, I reduced the clock domain.
    Until your post I didn't realise I use CompactRIO I/O. Is There a difference to (let me call it) "direct R-Series I/O"?
    I need the Expansion Chassis (Connector 1), the 9421 (8-ch DI) and 94?? (8-ch DO) to connect 24V logic to the FPGA. Additionally I have two SCB-68 (Connector 2+3) for 5V logic (DI, DO, A/B linear position measurement, pulse generation) and some analog input. All code in 1 VI, but distributed in 3 loops.
    To change the clock domain back to 40MHz, I have to optimise my code . Well, the code is sloppy , so optimising is OK .
    To tell the hole story:
    After updating to 8.5.1, my first contact to NI was by phone. The engineer asked for the Code, the project and the hardware.
    It took a while for me to put the information in an email. Meanwhile engineer the found a paper with the solution I
    mentioned in my second post and send it to me, before looking at my code. The paper said someting about "tightend timing constraints",
    "safe communication" and "multiple DMA target to host transfer". Not exactly what I was doing, but I reinstalled
     RIO 2.3.1 and ... compile successful.
    @ Basset:
    The simple VI (picture) in my first post reproducese the issue exactly.
    I'm not at work any more, so I can't provide the full code or the SRQ# until tuesday (holiday on monday ).
    FYI I'm located in Germany, so I called the german NI support.
    Uli

  • Sibling Link Error After Updating Software

    Ok, two days ago I updated my imac software. Afterwards, the imac started running slow and freezing (which it never does). I booted through my OS X DVD and ran disk utility, repair HD. It came up with a sibling link error: can't repair drive. Not knowing what to do, I erased my HD and reinstalled Leopard. Everything ran well until I updated my software, then the same problem. At this point I erased my HD (zero out) and reinstalled Leopard with no problems. Again, I ran software update and the same problem happened, sibling link error. So this time, I erased the HD and haven't updated the software. What should I do? Should I not run software update? It appears that the problem (sibling link error) only surfaces when I update my software.

    After installing Leopard off the disc (which is where you are at now), try running Disk Utility and using the +Repair Disk Permissions+ routine. Then, run Software Update and only select the 10.5.7 Update on the list of available updates. Run that one update only. After it is done, check to see of you have that same error. If you do not, run the other available updates. When it is all done, run +Repair Disk Permissions+ one more time.
    Note: I always run +Repair Disk Permissions+ immediately before I have Software Update install any update.
    If you still get that error after the 10.5.7 update, you can try installing Leopard from the disc again, and using the stand-alone updater for installing the 10.5.7 combo update.
    http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate

Maybe you are looking for