Error appears when debugging a generic collector for ADONIS

We have Sentinel 6.1
We are working with a new collector for the DNS appliance ADONIS , and
when we are debbuging an error appears in the function SUBSTR
When this error doent appear during debugging too, looks like the
collector enters in a loop, the funtion where the debugging stands is
"this.read = function"
The generic collector doesnt been modified in the functions preParse,
Parse and Normalized.
The generic collector its in JAva script and It was maded with the ANT
templates in ECLIPSE.
marrovdr
marrovdr's Profile: http://forums.novell.com/member.php?userid=41874
View this thread: http://forums.novell.com/showthread.php?t=423439

Hmm....
Well I'm not sure we have quite enough information yet to really help
you. That said, there are some basic things we can check:
1) Are you saying that you are seeing this error with a completely
unmodified Collector, e.g. you ran the "Create New Collector Plug-in"
Ant task, then immediately built and deployed the result?
2) Are you using the 'stable' SDK or the SVN-based 'current' branch?
Also, I'm not clear what you're saying about the this.read bit, but the
line that states:
record.connectorData = getData(5);
(which is in the Connector.read() method) is where the Collector
fetches the next record from the Connector. You should note that if no
data is retrieved, you'll basically get an empty record. If you try to
do any parsing on that data, you can run into problems because the
variable you are trying to operate on don't exist.
By this I mean that if rec.s_RXBufferString doesn't exist (e.g. you got
a null record from the Connector), but you try to do:
this.s_RXBufferString.substr(5,8);
you'll get an error like "method substr() is undefined" or something.
Also I should note that if your Collector is pausing at the getData()
line, that probably means that your device isn't actually sending any
records - check using a Raw Data Tap on the Event Source.
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=423439

Similar Messages

Error cannot use device the connected USB device requires too much power this error appeared when I added my camera

Error appeared when I connected my camera to iPad I used a camera connection device error cannot use device t he connected USB device requires too much power
Thanking you
Wendy Banks

Some cameras are designed to use the power suppled via USB when they're plugged into another device, usually a PC or laptop. The iPad does not supply sufficient power for a camera. The iPad Camera kit allows for either a camera to be plugged in only for the transfer of photos, not as a power sourse, or the removal of the SD Card from a camera so it can transfer photos as an alternative.

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store

Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store as Cannot connect to Itunes Store

you are not alone! I get the same for weeks now and I got an itunes voucher for xmas!
enjoy ecuador you lucky liucky barsteward, I have been to honduras/belize/mexico/guatemala/peru/bolivia/chili but ecuador is meant to be BRILLIANT
so to recap obviously some glitch at apple!, sorry I couldn't help

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..." - is there a way to overcome this error?

I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
Jyh-Jiun Liou

An unknown error appears when I try to save older files in CC 2014. If I outline the fonts, I can save.

An unknown error appears when I try to save older files in CC 2014. I can save the file if I outline the fonts. Is anyone else having this problem?

It also happens with my illustrator.
Have you found a solution with Adobe Support?
You can transform the all fonts in curves, but itll be impossible edite again. Sad. too sad.

HT2623 I keep getting an error message when I enter my password for iCloud IMAP server

I keep getting an error message when I enter my password for iCloud IMAP server

A number of users who have chosen to set up iCloud mail manually in the Mail application seem to encounter problems with continually being asked to sign in. This may well be a result of incorrect settings such as not setting 'Apple Token' for authentication under the accounts advanced settings.
A more general approach to remedying such problems would be to turn off Mail in System Preferences/Settings > iCloud, checking the account has been removed from Mail (and deleting it if it hasn't), restarting and then enabling iCloud Mail again from System Preferences/Settings > iCloud. This will ensure the correct settings are used.

Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types. You do not have enough access privileges for this operation." How to fix?

After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player. It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types." I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem. Any suggestions? Thanks.
J

Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

Why do i get an error 8003 when trying to download apps for my IPAD?

why do i get an error 8003 when trying to download apps for my IPAD?

There's some advice on that one in the "Error -50," "-5000," "8003," "8008," or "-42023" section of the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

TS1424 How do you fix a R6025 pure virtual function call error? When I try to search for music, iTunes freezes & returns this message.

How do you fix a R6025 pure virtual function call error? When I try to search for music, iTunes freezes & returns this message.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

TS4002 "Unknown validation error" appears when I'm trying to sign in to mobile me under preferences. I am not receiving incoming email on my mac pro.

"unknown validation error" appears when I'm trying to sign in to mobile me under preferences. I cannot receive email on my mac pro.

Mobile Me was withdrawn well over a year ago. If you still see Mobile Me in your system preferences it is because you have an old operating system.
iCloud has replaced mobile me, but you would need OS X 10.7.2 or better to use iCloud.

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

Why my full name appears when I write a review for an app?

When I write a review for an app, my full name appears! I would like to use a pseudo but it seems that I can't!
Does somebody have/had the same problem?

I just wrote a review to see what happens. The name under your review will be the same name as it appears in this forum. Only way to change that is to create a new forum account with the name you would like to appear in the reviews.

Error "CONVT_NO_NUMBER" When testing Nisto e-orders for Dow integration,

Hi..
When testing Nisto e-orders for Dow integration, a runtime error is generated when the IDOC processes to produce an order.
ST22 details:-
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Date and Time 11/21/2008 13:58:03
Short text
Unable to interpret "IC5001" as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLXVED" had to be terminated because
it has come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught in procedure "EXIT_SAPLVEDA_011" "FUNCTION" nor was it propaged by a RAISING clause .since the caller of the procedure couldnot have anticipated that the exception could occur,the program is terminated .
The reason for the Exception is :
The program is attemted to interpret the Value"IC5001"as a number but since the value contravenes the rule for correct number format,this was not possible.
How to correct the error pls help me
Thanks,

Hi Sanjith,
The error message is very clear and says IC---- can not be interpreted as number.
this may be
while passing the data IC are treated as numbers and processed furhter may be arthimatic operatons.
or it may passed to a NUMERIC type FIELD.
please check once.
regards
Ramchander Rao.K

Error appears when debugging a generic collector for ADONIS

Similar Messages

Maybe you are looking for