Error: At the conversion of a text from codepage '4110' to codepage '4102':

I am trying to open an ANSI file from Application server.
I am using "open dataset F_FILENAME for input in text mode encoding default."
For some ANSI files it works fine, and for some it fails. I want to open this file and validate it , post it back on to application server
with its original format.
How do I achieve this? THanks,
Below is the system config.
Database codepage                         Unicode
Current Codepage of Appl. Server    4102
Codepage of Front End               4110 UTF-8 GUI

Hi Shabbir,
The statement "open dataset F_FILENAME for input in text mode encoding default" would open the file with the default codepage of your system which is 4102 for your system.
Due to which the SAP system implicitly coverts the characters in the file to 4102 codepage. You might get "CONVT_CODEPAGE" error if system is not able to convert some characters in the file.
You should use
Open dataset F_FILENAME for input in legacy text mode code page 1100
Check the following link for syntax.
[open dataset in SAP|http://help.sap.com/saphelp_nw04/helpdata/en/79/c554a0b3dc11d5993800508b6b8b11/frameset.htm]
You can also use " IGNORING CONVERSION ERRORS " to avoid "CONVT_CODEPAGE" errors..
Cheers
Ajay

Similar Messages

Explain why READ DATASET conversion from codepage '4110' to codepage '4102'

I am unfamiliar with unicode but I am trying to solve a problem in an ABAP program.
Our code is
OPEN DATA p_in FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET p_in INTO i_tab.
The program gives me the error 'At the conversion of a text from codepage '4110' to codepage '4102'. The program abends on a line in the file that contains the special character '#'.
Does this mean that the file I am reading is in codepage '4110' and the internal format of i_tab is codepage '4102'? If so, how do the codepages get assigned to unix files and internal structures How can I make the both codepage '4110' or codepage '4102'? Also, what is the difference between these two codepages?
thanks.
Ryan
My

Hi,
Use
open dataset DSN in text mode for input encoding utf-8.
a®

Error "conversion of a text from codepage '4102' to codepage '1100' "

Hello,
If some could help me with this error while tryning to transfer a structure containning the character "u20AC" to a file:
OPEN DATASET p_fic FOR OUTPUT
IN text MODE ENCODING non-unicode.
transfer wt_textes to p_fic.
close dataset p_fic.
wt_textes contains the a string with the character "u20AC".
This code dumps:
At the conversion of a text from codepage '4102' to codepage '1100':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'ZREPRISE_TEXTES' had to be terminated as the
conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 1. If this number is 0, the second error case, as
mentioned above, has occurred.
thanks in advance

Hi,
the problem is that code page 1100 (ISO-8859-1) does not support the u20AC-symbol. However the NON-UNICODE mode usually takes this code page if you logon with EN or DE (or any other Western European language).
As alternative, you could use OPEN DATASET ... LEGACY TEXT MODE... CODE PAGE 1160 ...
Code Page 1160 is the SAP number for MS 1252, which includes the u20AC-symbol.
The other alternative would be to download the file in UTF8 mode and then use the tools described in SAP notes 747615 or 752859 to convert the file content from code page 4110 to 1160 (code page 4110 is the SAP number for UTF-8).
Best regards,
Nils Buerckel

Error "conversion of a text from codepage '4103' to codepage '1100' "

Hello,
Greetings!
Please help me with this Error while trying to transfer data to application server.
My data contains this characters "*".
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE.
Transfer <data> to p_file.
CLOSE DATASET p_file.
<data> contains "*" characters.
At the conversion of a text from codepage '4103' to codepage '1100':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'ZRPPO_TEST' had to be terminated as
the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 2. If this number is 0, the second error case, as
mentioned above, has occurred.
Thanks.
Regards,

Hello,
1100 is ISO 8859-1 charset.
The only char there looking like a double quote is U+0022 QUOTATION MARK, the normal ASCII dblquote. This is definitely contained in both codepages.
BUT: in Unicode (4103), there are tons of other, similar looking, variants of quotes or quotation marks which cannot be converted to 1100.
What you can do to find out what exact char you have:
In the Unicode system, copy the character from GUI display (e.g. in ABAP debugger) into Windows Wordpad, mark this char in Wordpad with the mouse and press ALX+x
This will convert the char to its Unicode codepoint (22 -> U+0022 for the ASCII dbl quote).
Regards,
Alex

Problem conversion of a text from codepage '4110' to codepage '4103'

Hi!
I upgrade my SAP version ECC 5.0 no Unicode to ECC 6.0 Unicode .
Now, when I execute some reports I get a dump because when I open my file with 'OPEN DATASET' and then READ and TRANSFER to another file the result is :
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported.
This dump is got when the file contain special characters like 'Á,Ñ,...)
I have searched some information and the source error I think is about UTF-16 to UTF-8 conversion. I look for some SAP notes but I don't clear what I have to do.
Thanks in advace.
Ana

Hi Ana,
please check the code page of the uploaded file. In your scenario the assumption is that it is based on UTF-8.
If it is based on Non-Unicode, you need to use OPEN DATASET .... ENCODING NON-UNICODE ...
Best regards,
Nils Buerckel

I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word. So far, after many tries, I get soe type of error and the conversion fails. Please advise?

I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word. So far, after many tries, I get soe type of error and the conversion fails. Please advise?

Hi there,
It sounds like there may be an issue with the quality of the PDF. Not all PDFs are created equal, and especially those created from scanned documents can be problematic if the scan quality isn't the best. Is there a dark background on the PDF, or stray marks or smudges?
You can try converting with OCR disabled at outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. But, while that's a good test to find out where the problem lies, you'll end up with a Word document that isn't editable, so it's not an optimal solution.
Please let us know how it goes.
Best,
Sara

Is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages?

is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages? A different App perhaps?

Isn't that you asking how to get it (undefined) back?
If you never had Pages '09, you can buy it from Amazon very cheaply:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f68e84cd2ec6 123bd2ed93806c7e7fb6&mforum=iworktipsntrick
Peter

Spinwheel when syncing, unable to sync photos, error message "the disk cannot be read from or written to" ... please help!

spinwheel when syncing, unable to sync photos, error message "the disk cannot be read from or written to" ... please help!

Everytime I try to sync my photos to iPad or my iPhone. The sync freezes for a whilie then comes back with "the disk cannot be read from or written to". I have already exported photo library from iPhoto and readded the photos.

An error prevents the Change Management Upgrade script from executing

I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.

I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando.

I want to know if Lightroom 5 (version 5.7) supports the conversion of raw files from the Fuji X-T1 micro 4/3 camera system???

I am considering purchasing the Fuji X-T1 Micro 4/3 camera.
However before I do I need to know if Lightroom 5 version 5.7 supports the conversion of raw files from this camera!!!????
Can anyone please let me know if Lightroom does convert raw files from the Fuji X-T1 please???
Many thanks,
Connie

Dear Adobe Support Staff!
Many thanks for getting back to me re Lightroom and the Fuji X-T1.
I am now wondering if Lightroom supports the Olympus OMD-E-M1 raw files??? Will Lightroom 5.7 convert raw files from this micro 4/3 camera??
This is the one I'm now intending to buy.
Many thanks for getting back to me!!!
Cheers
Sent from my iPhone

EXCEL VBA: Inserting rows code returns error "2147417848 The object invoked has disconnected from its clients"

I was executing the following code in Excel 2013 that is linked to a button I use to add multiple rows in a chosen section of a worksheet
Sub Add_Rows_dc()
Sheet53.Unprotect ("xxx")
X = Range("C1").Value + 1 'Section Counter
Y = ListSheet.Range("I" & X).Value 'Existing rows counter
Z = ListSheet.Range("H" & X).Value 'Position counter
Righe = InputBox("How many rows would you like to add?", , "1")
If Righe < 1 Then GoTo err ' test for invalid row number
RigheSheet.Rows(X).Copy
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
GoTo Fine
err:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
End Sub
From time to time it returns me the error "2147417848 The object invoked has disconnected from its clients" and the debug point out the line
Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
I cannot find any specific reason due to the fact that the error seems randomic, sometimes the code is perfectly executed, sometimes not.
I wrote this piece of code in Excel 2010 and never encountered such problem before reusing it in Excel 2013
Has someone an insight or a suggestion?
Thank you very much

Re: strange error
Try it this way...
(might work, might not)
Sub Add_Rows_dc_R1()
Dim X As Double
Dim Y As Double
Dim Z As Double
Dim Righe As Variant
Dim Mess As Long
    Sheet53.Unprotect ("xxx")
    X = Range("C1").Value + 1 'Section Counter
    Y = ListSheet.Range("I" & X).Value 'Existing rows counter
    Z = ListSheet.Range("H" & X).Value 'Position counter
    Righe = InputBox("How many rows would you like to add?", , "1")
    If Righe < 1 Then GoTo errX ' test for invalid row number
     RigheSheet.Rows(X).Copy
     Rows(Z - 1 & ":" & Righe + Z - 2).Insert Shift:=xlDown
    GoTo Fine
Fine:
'Formulas update
Z = ListSheet.Range("H" & X).Value 'Position counter update
Range("U" & Z - Righe - 2 & ":AF" & Z - 2).FillDown
Sheet53.Protect "xxx", , , , , True
Exit Sub
errX:
Mess = MsgBox("PLEASE INSERT A VALID NUMBER OF ROWS", vbCritical)
End Sub
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

CONVT_CODEPAGE conversion of a text from codepage '4110' to codepage '4103'

Hi,
I am receving the runtime error when i am trying to read the data from the application server(the data is loaded in the application server from the FTP server). The issue is with the character ' ¦ ' . Looks like the system is not able to convert this character from one code page to another.
I am getting this issue in both Development and in Quality Systems. Both systems are unicode systems.
I have gone through the existing threads on it and found 2 solutions. One is adding UTF-8 in the Open Dataset statement and other is adding IGNORING CONVERSION ERRORS. I tried both these options and the issue still exists.
Runtime error text:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
Regards,
Karthick.

Let's first name the code pages you've given: 4110 is UTF-8 and 4103 is UTF-16LE. A conversion between Unicode code pages should not be an issue, but converting from a Unicode page to a non-Unicode page obviously is likely to face conversion issues due to missing characters in the non-Unicode target code page.
So let's check the real problem: It sounds like you're reading a file that's not in a UTF-8 encoding, yet you claim it is. I.e. you mention the character ¦ is causing problems. Assuming that you actually copied the character you can already see that it's a bit unusual, i.e. it's not the normal pipe symbol | (which is closed, whereas your character is divided). Now taking the hex code of the character off your posting I get a A6 (decimal 166, binary 10100110). Now in UTF-8 only ASCII (i.e. 7 bit values) are 1 byte characters (i.e. one character equals to one byte).
Now if you check the UTF-8 table you'll see that your pipe symbol with hex value A6 is a continuation character, i.e. it has to be part of a longer multibyte sequence. So if your file errors out on this specific character it's probably simply due to the fact that you don't have a UTF-8 file, but some other encoding (e.g. often it's latin1). So your first step should be to figure out what encoding your file is that you're reading. Once you know it, conversion from that code page to UTF-8 or one of the UTF-16 flavors is no challenge.
By the way, one easy check for invalid UTF-8 byte sequences is to load the file into a web browser. E.g. in your case you could try copying the following data into a file and opening it in your favorite web browser (load will fail).
<?xml version="1.0" encoding="UTF-8"?>
<data>¦</data>
After testing that, change the encoding from UTF-8 to latin1 and you'll see that you can load the page into the web browser...
Cheers, harald

Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

Hello Community
    "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
domain controller using Active Directory and the UI.
    In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
forest trust with Forest-Wide authentication so that a different forest user(s) or
group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
    But also forestB needs to create a "One-way, Incoming" forest trust so that
I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
in my "forestA" or I can
add user(s) as "domain user(s)" from “forestB” into my "forestA".
    The problem is that when I right click the global group in my forestA and then
properties, when I click "Members" and then the "Add" button when I type
"forestB\username" I get an error message from Active Directory stating:
    "the following object is not from a domain listed in the Select location
dialog box, and is therefore not valid: forestB\username".
    Am I doing something wrong when creating the one-way trust in my
“forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
    Or could I possibly need to select "Change Domain" or "Change Domain Controller"
before adding the users or Groups to my forestA from forestB?
    That is why I am asking
how do you add an Active Directory user from one forest into another forest?
    Thank you
    Shabeaut

Hello Denis Cooper
    That is the end result.
    What I was trying to do was that I was trying to
bring in the user(s) and group(s) from “forestB” into
my “forestA” Global group.
    Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
into the domain local groups on my member servers in my forestA.
    So since the error message is:
"the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
Does your response
mean only Global group(s) from forestB not domain user(s) from forestB have
to been added to domain local groups in forestA?
Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
how without getting the above error message?
Thank you
    Shabeaut

Error installing the latest version of Muse from correct version v2.1. Build 974 on Mac OSX 10.6.8

I can't install the latest version of Muse. When i open Muse (version v2.1. Build 974) I am asked if I want to install the latest version and when I hit "Install now" it runs the installation to the end but when it ends i get the message "Sorry, an error has occured. The application could not be installed because the installer is damaged". I have installed the latest Air 3.5.0.1060.

Please remove your current installation of Adobe Muse using the uninstaller and then reinstall from https://creative.adobe.com/. You can find more details on how to install at http://forums.adobe.com/message/4396277#4396277?tstart=0.

Copy the caption and value text from a pdf form to a word doc.

I designed a form to be used by nurses for entering data. They then want to copy the info into a text editor of a program (similar to word). When they copy paste it only copies the field and not the values entered. Any fixes?

When the form I designed for some nurses is used, the information has to be copied and then pasted into a text editor program for a patient file. When I do a select all and copy, it only copies the fields, not the information entered by the nurses. Is there a way to allow all of the fields and text entered to be copied and then pasted in the editor program?

Error: At the conversion of a text from codepage '4110' to codepage '4102':

Similar Messages

Maybe you are looking for