Error at the time of saving sales order

Hi Sapfans,
at the time of saving the order i am getting the following error
please help me how to solve it
please help me fast
thanks and regards
srinivas
Runtime Errors MESSAGE_TYPE_X
Date and Time 19.11.2007 15:19:18
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Maintain the current CRM release (table CRMPAROLTP)
Long text of error message:
Diagnosis
Various transfer errors occur when transferring SAP sales orders to
CRM or there is no status update or the status update has errors
when transferring from CRM to the SAP system. This is caused by an
incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
no entry is maintained at all.
System Response
To avoid data inconsistencies, this message causes a short dump.
Procedure
Maintain table CRMPAROLTP in your SAP system as is described in SAP
Note 691710 and then repeat the process again.
Procedure for System Administration
Technical information about the message:
Message class....... "V3"
Number.............. 302
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AF0B_BAPIDATEN_ERMITTELN
Row 338
Module type (FORM)
Module Name BAPIDATEN_ERMITTELN
Source Code Extract
Line SourceCde
308 else.
309 *-----Nicht unterstützt, Abbruch
310 message a301(v3).
311 endif.
312 endif.
313
314 *-Szenario A prüfen
315 if lv_scenario_a = 'A'.
316 vbak-vbkla+2(1) = lv_scenario_a.
317 endif.
318
319 *-ermitteln CRM-Release
320 call function func_name
321 exporting
322 i_paraname = 'CRM_RELEASE'
323 importing
324 e_parval1 = lv_parval1.
325 lv_release_crm = lv_parval1+0(3).
326
327 * If lv_release_crm empty => X-message (correct download not possible)
328 if da_download_active = charx.
329 CALL FUNCTION 'CRM_CONNECTED'
330 IMPORTING
331 CRM_CONNECTED = lv_crm_connected
332 EXCEPTIONS
333 NO_CRMRFCPAR = 1
334 OTHERS = 2
335 .
336 IF sy-subrc = 0 and lv_release_crm = space and
337 lv_crm_connected = charx.
>>>>> message x302(v3).
339 ENDIF.
340 endif.
341
342 *-Füllen der View für das Ermitteln der Auftragstabellen
343 da_sales_view-partner = charx.
344 da_sales_view-sdcond = charx.
345 da_sales_view-sdcond_add = charx.
346 da_sales_view-contract = charx.
347 da_sales_view-text = charx.
348 *-bei mehr als 1000 Belegflusssätzen werden Daten nicht ermittelt
349 if lv_tabix_vbfa < 1000.
350 da_sales_view-flow = charx.
351 endif.
352 da_sales_view-billplan = charx.
353 da_sales_view-configure = charx.
354 da_sales_view-credcard = charx.
355
356 *-Im Standardszenario soll eine manuelle Änderung eines CRM Belegs
357 * (ab CRM Release 30A) nicht zurück ins CRM gesendet werden. Das

HI,
This error is because of crm release patch.
You can update this patch.
Use Transaction code se16.
Type the table name-CRMPAROLTP
Go in New Entries
Type 'CRM_RELEASE' In First Field(PARNAME)
Type '40A' In Value 1 i.e. 5th Field
Save.
This will solve your problem.
If this is useful please give reward points.
Regards,
Ashok

Similar Messages

  • User Exit at the time of saving Prod Order.

    Hi All,
              I need to know whether there is any exit which gets called when I save the Production Order.
    In our project Serial No as well as Production Order gets created when we save the Production Order.
    I have to pass "Basic Start Date" to a FM which generates Serial No.I can hit some DB table if i know
    Planned Order no at the time of saving of Production Order.So i want the user exit at the time of saving Prod Order
    I have also tried one program which gives all the User exits for a certain Transaction.But the user exit mentioned in that is not getting called.
    Thanks in Advance,
    Saket.

    hi,
    check this exit for production order by placing a break point in it.it will work .
    PPCO0007                         Exit when saving production order
    exit name : EXIT_SAPLCOZV_001

  • Alternative BOM picking at the time of creating sales order.

    Dear All,
    I have on requirment and it is as follows.
    I have 3 alternative BOMS for one material in same plant.Now sales order is created for this materila which alternatibe BOM will system pick.
    If there any possibility to customise alternative BOM picking at the time of creating sales order.Please let me know what settings do I need to configure for this.
    Thanks for your support and time.
    With Rgds,
    Babu

    hi,
    this is to inform you that,
    1. since you have 3 alternative BOM's.  so by default system will pick up that BOM which is first according to hirearchy level at the plant level.
    alternatively if the same material is going to be used for different purpose (PRODUCTION OR PLANNING), SECOND ALTRENATIVE bom will be picked.
    2. you will have to assign the BOM which you want to pick add it to the picking list (ASSEMBLY OF THE PRODUCTS/COMPONENTS).
    in CO27 - maintain the range of components at component level with plant as same for which you have already created a BOM.
    create a sales order according - that alternative BOM will be directly assigned to the sales order.
    please check and confirm.
    balajia

  • User exit at the time of saving purchase order

    Hi experts
    There are some plants for which we need to auto GR. Is there any user exit available which will check these plants in PO at the time of saving PO document and do auto GR.
    Regards

    Enhancement                                                                               
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance    
    MM06E001                                User exits for EDI inbound and outbound purchasing documents   
    MM06E003                                Number range and document number                               
    MM06E004                                Control import data screens in purchase order                  
    MM06E005                                Customer fields in purchasing document                         
    MM06E007                                Change document for requisitions upon conversion into PO       
    MM06E008                                Monitoring of contr. target value in case of release orders    
    MM06E009                                Relevant texts for "Texts exist" indicator                     
    MM06E010                                Field selection for vendor address                             
    MM06E011                                Activate PReq Block                                            
    MMAL0001                                ALE source list distribution: Outbound processing              
    MMAL0002                                ALE source list distribution: Inbound processing               
    MMAL0003                                ALE purcasing info record distribution: Outbound processing    
    MMAL0004                                ALE purchasing info record distribution: Inbound processing    
    MMDA0001                                Default delivery addresses                                     
    MMFAB001                                User exit for generation of release order                      
    MRFLB001                                Control Items for Contract Release Order                       
    AMPL0001                                User subscreen for additional data on AMPL                     
    LMEDR001                                Enhancements to print program                                  
    LMELA002                                Adopt batch no. from shipping notification when posting a GR   
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC    
    LMEQR001                                User exit for source determination                             
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt     
    LWSUS001                                Customer-Specific Source Determination in Retail               
    M06B0001                                Role determination for purchase requisition release            
    M06B0002                                Changes to comm. structure for purchase requisition release    
    M06B0003                                Number range and document number                               
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N                   
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.  
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)    
    MEETA001                                Define schedule line type (backlog, immed. req., preview)    
    ME590001                                Grouping of requsitions for PO split in ME59                 
    M06E0005                                Role determination for release of purchasing documents       
    M06E0004                                Changes to communication structure for release purch. doc.   
    M06B0005                                Changes to comm. structure for overall release of requisn.   
    M06B0004                                Number range and document number                             
    User exit for me21n

  • Update ZPURCHASE THROUGH BADI .. at the time of saving Purchase Order

    Dear All Gurus,
    I have a situation wherein i have to save the Purchase Order Details in My DB table (ZPURCHASE ) at the time of Purchase Order Creation through BADI...
    Fields of ZPURCHASE are (Mandt,EBELN,BUKRS)
    Can some one guide me how can i achieve this..
    I tried doing it through User Exits.. i have written a piece of code when saving the purchase order but my problem is .. The purchase order numbers are generated only after SAVE is complete..
    The other alternative i want to try is through BADI.
    Looking forward for your reply.
    Thanks !!

    > I have a situation wherein i have to save the Purchase Order Details in My DB table (ZPURCHASE ) at the time of Purchase Order Creation through BADI...
    > Fields of ZPURCHASE are (Mandt,EBELN,BUKRS)
    I have no solution for your actual problem (wrong forum, you should try the MM forum) but I wonder why you just don't use the data that is already there in EKKO and EKPO?
    Markus

  • ABAP Runtime Error at the time of saving of Document Through CV01N tcode

    Dear Experts
    We have install seprate DMS Server for storing various documents of different module.
    While saving of Document through Transaction CV01N one small screen gets pop up.Which is as follows
    Check in Document:KPro
    Storage Category   Description
    ZCITY123               DMS
    I am selecting above line from Kpro, then when i click on save system gives ABAP Runtime Error.
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          21.10.2008 18:35:26
    Short text
         Function module "PROJECT SYSTEM" not found.
    What happened?
         The function module "PROJECT SYSTEM" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLSDCE" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    I am not understanding why this dump is coming.
    How i can come up from this issue.Pls guide me.If any customizing is required pls give the steps
    Thanks in Advance.
    Regards,
    Sandeep Theurkar

    There is a programming error somewhere.To get a solution quickly, do as follows:
    1. Turn off all badi's, user exits and whatever you have changed in standard SAP.
    2. Rerun - if it still fails - search in SAP notes for relevant notes
    3. If it doesnt fail - you have an error in your own programming
    4. If you are on relevant Support packages etc, send a message to SAP.
    Regards,
    Espen Leknes

  • Error in the division to create sales order

    Hello,
    I need a help....
    I am creating a sales order and put the material the system returns me the following error -
    Message V1599
    Is not impossible determinated division for the item 00010. The item has the plant BD01, and assigned to this company BDBR. Put the division is mandatory for this company, The problem is that customizing is incomplete.
    I looked at all possible points in customizing and could not identify where the missing input....
    I look forward to your help....
    Thanks,
    Tatiane

    Hello Lakshmipathi,
    If I remove the fleg the company's balance sheet will not be done by business area. Fix my problem, but it is not the correct the balance would be incomplete contabil.
    I already checked in customizing the possible failures, I looked at the transaction OMJ7 was assigned Plant / Division and Business area. In the material master its ok com division correct.
    I no longer know where to look...
    Thanks,
    Tatiane

  • HU Identification error at the time of confirming Transfer order

    Hi Guys
    While confirming the Transfer order with respect to Outbound delivery
    We are getting this error
    Source storage unit we have provided is as per our naming convention : sea07+701
    But it is giving this error :Enter a storage unit
    HU identification field it is pointiong the cursor
    CAn any body solve and suggest a solution?????????
    Message no. L3216

    Hi,
    You need to enter the destination SU number as well. There is customizing in the storage type as well as the mvt to decide how the destination SU / HU needs to be determined (either copy source or take pick HU as destination HU for example).
    MZ

  • Update termination error at the time of order creation and chamge?

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hi,
    Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
    Or go to SBWP T.Code in the user where you got this error and check the inbox.
    It will display why the error is appearing.
    Show the same to the ABAPer and ask them to work on it.
    I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
    Regards,
    Krishna.

  • Update termination error at the time of order creation

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hello ,
    "Update terminated " error has two reasongs.
    First is system update  was not active and hence terminated
    For this to check Goto the transaction code SM13  and  check whether the SYSTEM UPDATE is active or not.
    If it is active ,
    Then click on the Option TOBE updated in the status  and execute, then in the next screen you can find some list of documents that are not updated and causing error .
    Click on MODULES in the screen and find the erro which causing this error.
    Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
    Please check and revert back if you need further details
    Also check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
    regards,
    santosh

  • Run Time Error on Saving Sales Order

    Hello,
    We are facing problem when saving sales order. When order is created and save button is pressed, it saves sales order and gives Order  Number. But while saving the order during update it gives dump due to Data duplication in VBFA while inserting data to VBFA table
    Looking at ST22 log this error is in form VBFA_BEARBEATEN
    Kindly guide.
    Thanx in advance.
    Regards

    Check the Sales Order Number Range.
    It seems either the Number Range is exhausted (completed) or a document with same number is already created in system in past...
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Error while saving sales order

    Hi I am encountering below error message while saving sales order:
    Warehouse
    Specify export data in material master
    Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

    Hi,
    Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
    If the Order type is activated then the following error message can pop up unless you maintain in material master.
    See whether export legal control data is activated or not for the order type.
    In IMG Sales and Distribution>Foreign trade>Legal control section
    Regards,
    Saju.S

  • Error at the time of Production order cancellation.

    Hi PP Gurus,
    The transactions happened when Sales order costing was activated
    1. Sales order created
    2. Production order creation, release
    3. Production order confirmation and QM lot created
    4. QM lot cleared with Result recording and UD has taken
    5. While doing PGI system started to ask about Sales order costing
    Now as per CO requirements all the documents has to be reversed and Sales order has to be deleted. But when I'm trying to cancel production order confirmation, it's giving error that Stock of Sales order quantity is deficit in Quality stock (As it is already moved to unrestricted Sales stock). And when we reversed it through Movement type 322 its giving error like UD has already taken for partial lot....
    We tried following options.
    1. Another Sales order irrelevant to Sales order costing created and we tried to move stock from old sales order to new sales order through movement type 413E but got the same Sales order costing error.
    2. We tried to move stock from old Sales order to unrestricted use, same error we got.
    As per my knowledge UD can't be reversed in Standard system.... What could be done in that case... Please help if some one faced the same situation.
    Thanks & Regards,
    Abu Arbab

    Dear,
    If you want to change UD code, it is very simple from QA12. But if you want to reverse goods movements also, it is some thing big process. please check OSS notes 175842.
    Please check SAP note note 33924 Reversing the UD and 175842-QM lot stock reversal.
    Please refer my reply in this thread also,
    UD cancellation or reverse after GR
    Please go through the transaction CO09, you enter your plant,Material, MRP area (Plant) and Checking rule then execute, it will take you to next screen there you can able to see what are the conformed quantities for the Sales document wise(Reservations), and also you can see the current stock possition (Cummiletive ATP Quantity).
    Regards,
    R.Brahmankar

  • Budget Error at the time of Release of Purchase order

    Hi,
    We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
    PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
    Screens shot is attached herewith for reference.
    Thanks in advance.

    Hi Mar,
    The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
    Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
    Hope you able to connect the issue.....:P
    Regards
    Rohit Chopra

  • When saving sales order Error determining local currency: ER type 'M' date

    Hi experts
    we have created new sales area for intercompany billing process. we are doing testing for this.
    Update was terminated    
    after saviing sales order express document update was terminated received from author
    sales order Error Info...   M2 802: Error determining local currency: ER type 'M' date 02.08.2011.
    i need your input
    thanks

    Dear Manoj Verma,
    Check the pricing date of the sales order.
    Check the valid from date for the currency types/exchange rate type M in OB08
    Now check whether the pricing date in sales order is before the valid from date in OB08.
    If so , make the valid from date in OB08  as the pricing date in sales order in OB08 and then save.
    Thanks & Regards,
    Hegal K Charles

Maybe you are looking for