*** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.

Hello All,
In our development system, we are able to perform all the transactions normally(SAP level) and there is no performance issues..
We have checked from OS level in work directory file dev_disp..
We are getting below error.
Can you please suggest us on this..............
=========================================================
ERROR => DpRqCheck: T72 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 72    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8012   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53650
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T73 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 73    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8013   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53651
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T74 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 74    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8014   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53652
-IN-- req_info MS_ERROR
ERROR => DpRqCheck: T77 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 77    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8019   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53653
-IN-- req_info MS_ERROR
Wed Apr 7 08:55:32 2010
***LOG Q0K=> DpMsAttach, mscon ( ussapdir00) [dpxxdisp.c   10127]
Wed Apr 7 08:55:33 2010
use SAPLOCALHOST=<ussapdir00> as internal hostname
NiPAccept: accept failed (socket=7;errno=72)
***LOG Q0I=> NiPRead: recv (73: Connection reset by peer) [niuxi.c 928]
SoftCancel request for T45 U8133 M0 received from REMOTE_TERMINAL
Network error of client T46, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T46 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8135 MKK27890 46 BREWL07D4359) [dpxxdisp.c   9830]
RM-T46, U8135, 620     MKK27890, BREWL07D43598, 08:43:19, M0, W4,     , 2/0
Network error of client T45, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T45 is 10.228.250.65(10.228.250.65)
***LOG Q04=> DpRTmPrep, NiBufReceive (8133 RR606033 45 BREWL07D4359) [dpxxdisp.c   9830]
RM-T45, U8133, 600     RR606033, BREWL07D43598, 08:38:22, M0, W0, SPRO, 2/3
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
MBUF state ACTIVE
Wed Apr 7 08:55:39 2010
ERROR => DpRqCheck: T45 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 45    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8133   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53678
-IN-- req_info LOGOFF CANCELMODE
Wed Apr 7 08:55:44 2010
ERROR => DpRqCheck: T46 in stat TM_SLOT_FREE [dpxxdisp.c   5805]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   4621]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.c   4623]
-IN-- sender_id DISPATCHER        tid 46    wp_ca_blk   -1      wp_id -1
-IN-- action    SEND_TO_WP        uid 8135   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         -1      rq_id 53676
-IN-- req_info LOGOFF CANCELMODE
======================================================================
Thanks in advance..
Best Regards,
Kiran

Hi Kiran,
It's not a problem or error, it's just a message and hence can be ignored. However you can check out SAP note 1111154 once, it will fix the issue probably if it's happening due to HTTP problem. Else you can very well ignore it.
Regards
Sourabh Majumdar

Similar Messages

KDE Printer Manager fails with "client-error-bad-request"

I'm having some trouble with printing on my system. The KDE printer manager shows "client-error-bad-request" and no other information. When I run the KCM from the command line, I also get "kcmshell(17286) KCupsRequest::serverError: status unrecognised: 1024" on the console. I wasn't able to find any useful information on this issue on google or these forums; not even what the 1024 status code means. It seems to me that this may be a bug in the kcm_printer_manager module, but I'd like to rule out other possibilities first. Unfortunately, I don't know what to try from here. I'll provide as much potentially relevant information as I can think of below.
Changes since last successful print job:
Multiple updates to KDE packages
Update to cups that changed systemd unit file names.
Stopped and disbled old units
daemon-reload
Enable and start new units
Other updates to cups since then, if I recall correctly.
Packages and versions:
kdeutils-print-manager 4.14.3-1 (owns kcm_printer_manager module for kcmshell4)
kdebase-runtime 4.14.3-1 (owns kcmshell4 binary)
cups 2.0.1-1
libcups 2.0.1-1
systemd 218-1
linux 3.17.6-1
Let me know if any other information might be helpful.

Anyone please help.
Thanks,
Orton

I am getting an error Bad Request Request too long HTTP Error 400. The size of the request headers is too long.

When I sign into Methodintegration.com my data base I can get in ok. When I sign out I get the following error: I am getting an error Bad Request Request too long HTTP Error 400. The size of the request headers is too long. If I close Fire Fox and go back in it will work one time and then I get the same error message.

That is usually a problem with corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

Error Bad Request opening Related Links

Hi everyone, I am having the following error.
I created an I-view which points to an html page that is stored in KM.
I then put this i-view as a related link to a page on a workset.
When I click on the link on the Related Links i-view on DEV system it works ok, the popup with the html page is displayed correctly.
But, When I click on the link on the Related Links i-view on PRD system in the popup it shows a HTTP 400 - Bad Request Error, if I then refresh the page (the popup page) then the html is shown correctly.
I checked the URLs that are open on DEV and PRD and I found out that the behavior is different in the two systems.
For DEV System the URL opened is (This is the one that works correctly):
http://ecpepdev.red.ecopetrol.com.co:50600/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fco.com.ecopetrol.principal_ecopetrol!2fco.com.ecopetrol.Desktops!2fEcopetrol!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fco.com.ecopetrol.principal_ecopetrol%2Fco.com.ecopetrol.principal_roles%2Fco.com.ecopetrol.ess_ecp%2Fco.com.ecopetrol.wsPa_0%2Fpersinfo%2Fcom.sap.pct.ess.persinfo.pz03_lnk_page_3%2FrelatedItems%2FRelatedLinks%2Fco.com.ecopetrol.Informacion_Bancos
For PRD System the URL opened is (This is the one that doesn't work):
http://ecpep6prd.red.ecopetrol.com.co:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fco.com.ecopetrol.principal_ecopetrol!2fco.com.ecopetrol.principal_roles!2fco.com.ecopetrol.rolEssEcpAutoservicio!2fco.com.ecopetrol.wsPa_0!2fpersinfo!2fcom.sap.pct.ess.persinfo.pz03_lnk_page_3!2frelatedItems!2fRelatedLinks!2fco.com.ecopetrol.Informacion_Bancos
As you can see on DEV System it opens up as a sort of event called Navigate, while on the PRD System it opens up as a redirection to the content.
Can anyone help me on how to solve this issue?
Or does anyone knows where is the configuration to decide how the related link is opened? (Navigate event or redirection).
Best regards,
Juan Daniel Riveros R.

Anyone please help.
Thanks,
Orton

I cannot update 2 changes to portfolio, get error bad request error 400

I hit edit portfolio and I made a change to the number of share and to cost price per share. I hit enter and get message Bad Request Error 400

Can you make the changes while you are in Private Browsing mode?
In Private Browsing mode any cookies that you have from regular are not accessible.
*https://support.mozilla.org/kb/Private+Browsing
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

I cannot access Yahoo Mail, gives an error "Bad Request" in the tab? What does this mean and how can I access my mail?

I downloaded the latest version of Firefox 8.0.1. I have an Intel imac with os 10.6.8. I can log onto the Yahoo website, but not my e-mail, it works fine in Safari but not with FF? I get a message in the tab that reads"Bad Request", never seen this before, has anyone else?

That issue can be caused by corrupted cookies.
*https://support.mozilla.com/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request

Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1     localejbs/AF_Modules/MessageTransformBean     Local Enterprise Bean     transform
2     sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean     Local Enterprise Bean     1
and this Module configuration (and only this)
transform     Transform.ContentType     text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
Udo

Hi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/

Italian lang. f4000_it.sql and error in *Insert column value* bad request

I've found an error in the italian translation file f4000_it.sql. At the 1137413th row is needed a point after *&SESSION.* in fact the original version is:
c1:=c1||'<a href="javascript:popUp2(''f?p=4000:411:&SESSION::::P411_CALLING_FIELD:#CURRENT_ITEM_NAME#'',320,400);" tabindex="999" title="Scegli colonna" class="itemlink">[Insert column value]</a>';
I've modified in:
c1:=c1||'<a href="javascript:popUp2(''f?p=4000:411:&SESSION.::::P411_CALLING_FIELD:#CURRENT_ITEM_NAME#'',320,400);" tabindex="999" title="Scegli colonna" class="itemlink">[Insert column value]</a>';
Now I can show in Column Formatting correctly when I search fields in Insert column value

Hi,
Thank you for bringing this issue to our attention. Bug 9888444 has been logged to track this issue. Please note that this issue impacts users running in French, Italian, Japanese and Korean. When you edit a Classic Report column in the Application Builder, the Column Formatting region holds an item "HTML Expression" with an associated shortcut [Insert column value]. When running in French, Italian, Japanese or Korean, when the user clicks on the shortcut link, the popup displays an error "Bad Request". The popup works for all other languages.
We do not recommend that users modify the APEX internal application files. Instead, you can workaround this issue by directly entering column values into the "HTML Expression" text area in the Column Formatting region on the Column Attributes page, similar to the following:
*#EMPNO#*
where EMPNO is a column on your report.
Regards,
Hilary

Download Manager - failing with error 400 Bad Request

Each time I try to download some patches from the download basket I get this error: The request failed: 400. Download Manager says the files are Partially Downloaded but the downloads never complete (they just cycle round one after another attempting each download before failing). The connection to SAP ssems to be made correctly (see trace file extract below)
I'm running JRE version 1.4.2_12; download manager ver 2.1.130. I've tried uninstalling & reinstalling JRE & download manager (numerous times). Does anyone have any suggestions about what might be the cause?
Thanks, Chris
PS - This is the relevant part of the trace file:
24-Aug-2007 09:29:06   Opening connection to 'https://smpdla.sap.com:443/00000084/217/KGPHA68.CAR?object_id=011000358700000405252007E&filepath=00000084\217\KGPHA68.CAR&uid=S0003245349'
24-Aug-2007 09:29:06   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:13   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:13   Response received: 400 Bad Request
24-Aug-2007 09:29:13   Response Http Headers:
24-Aug-2007 09:29:13      Server=AkamaiGHost
24-Aug-2007 09:29:13      Mime-Version=1.0
24-Aug-2007 09:29:13      Content-Type=text/html
24-Aug-2007 09:29:13      Content-Length=340
24-Aug-2007 09:29:13      Expires=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13      Date=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13      Connection=close
24-Aug-2007 09:29:13   Response code: 400
24-Aug-2007 09:29:18   Notifying subscribers of download state ...
24-Aug-2007 09:29:18   The download has terminated ...
24-Aug-2007 09:29:18   getUserProxy: true
24-Aug-2007 09:29:18   getEffectiveProtocol: http
24-Aug-2007 09:29:18   detected: http / https w/o proxy request
24-Aug-2007 09:29:18   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:18   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:18   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'...
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: https
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Response received: 200 OK
24-Aug-2007 09:29:25   Response Http Headers:
24-Aug-2007 09:29:25      Date=Fri, 24 Aug 2007 08:29:02 GMT
24-Aug-2007 09:29:25      Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:25      Content-Type=text/plain
24-Aug-2007 09:29:25      Content-Length=44
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: http
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'...
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: https
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:26   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:26   Response received: 200 OK
24-Aug-2007 09:29:26   Response Http Headers:
24-Aug-2007 09:29:26      Date=Fri, 24 Aug 2007 08:29:03 GMT
24-Aug-2007 09:29:26      Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:26      Content-Type=text/html
24-Aug-2007 09:29:26      Content-Length=2416
24-Aug-2007 09:29:26   Number of URLs: 1
24-Aug-2007 09:29:26   Description lines: 56
24-Aug-2007 09:29:26   Adding HTTP1/1 Header: Range: bytes=0-*
24-Aug-2007 09:29:26   getUserProxy: true
24-Aug-2007 09:29:26   getEffectiveProtocol: https
24-Aug-2007 09:29:26   detected: http / https w/o proxy request
24-Aug-2007 09:29:26   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:26   Opening connection to 'https://smpdla.sap.com:443/00000085/652/KGPHA69.CAR?object_id=011000358700000485532007E&filepath=00000085\652\KGPHA69.CAR&uid=S0003245349'
24-Aug-2007 09:29:26   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:33   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:33   Response received: 400 Bad Request
24-Aug-2007 09:29:33   Response Http Headers:

Yes - I've checked the address w're pointing to & have rechecked several times with our network people re: the proxy.
The trace seems to show that we're certainly making the initial connections to SAP OK - it just gives up after a few redirections.
Chris

Test-ActiveSyncConnectivity fails with The remote server returned an error: (400) Bad Request.

Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003

Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic

Sync failure with "Unknown error" in bottom bar and " h2 Client sent a bad request /h2 " in sync log

For about two days all my devices have been failing to sync, with "Unknown error" in the bottom bar, and errors like this in the sync logs:
<pre><nowiki>1366935522699 Sync.Tracker.History DEBUG Saving changed IDs to history
1366935524160 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935524160 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935524544 Sync.Engine.History INFO Uploading 100 - 200 out of 643 records
1366935524547 Sync.Collection DEBUG POST Length: 53358
1366935525789 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935525789 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935525981 Sync.Engine.History INFO Uploading 200 - 300 out of 643 records
1366935525985 Sync.Collection DEBUG POST Length: 48900
1366935527259 Sync.Collection DEBUG mesg: POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527259 Sync.Collection DEBUG POST success 200 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527654 Sync.Engine.History INFO Uploading 300 - 400 out of 643 records
1366935527657 Sync.Collection DEBUG POST Length: 47409
1366935527786 Sync.Collection DEBUG mesg: POST fail 400 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527786 Sync.Collection DEBUG POST fail 400 https://phx-sync500.services.mozilla.com/1.1/zackw/storage/history
1366935527786 Sync.Engine.History DEBUG Uploading records failed: <h2>Client sent a bad request.</h2>
1366935527795 Sync.Status DEBUG Status for engine history: error.engine.reason.record_upload_fail
1366935527795 Sync.Status DEBUG Status.service: success.status_ok => error.sync.failed_partial
1366935527795 Sync.ErrorHandler DEBUG history failed: <h2>Client sent a bad request.</h2>
No traceback available
1366935527795 Sync.Synchronizer INFO Sync completed at 2013-04-25 20:18:47 after 14.18 secs.
1366935527795 Sync.SyncScheduler DEBUG Next sync in 600000 ms.
1366935527796 Sync.ErrorHandler DEBUG Some engines did not sync correctly.</nowiki></pre>

They are having sync server issues for the past few days.
https://services.mozilla.com/status/
https://twitter.com/mozservices
'''''Mozilla Services ‏@mozservices 26m'''''
'''''Sorry folks, we're still experiencing some intermittent server/hardware issues with sync. We really do appreciate your patience!'''''

"The request failed with HTTP Status 400: Bad Request." when running reports

Hi,
I installed reporting services and the install went fine.  The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
   at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
   at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
   at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
   at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
   at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
Thanks

I reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObject.Initialize(Boolean getObject)
   at System.Management.ManagementBaseObject.get_wbemObject()
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
   at System.Management.ManagementBaseObject.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
   at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObject.Initialize(Boolean getObject)
   at System.Management.ManagementBaseObject.get_wbemObject()
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
   at System.Management.ManagementBaseObject.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n

BPC NW 7.5 - Request failed with HTTP status 400: Bad Request

Dear Experts,
I am trying to upload a flat file to BPC server. I am getting the following error.
" Request to transfer a file to the server failed (ERROR): The request failed with HTTP status 400: Bad Request"
Could any of you please help?
I am selecting BPC for excel >manage data > upload data file > selection for source file > selection of destination file > ok
Thanks in advance
Vipin Jain

Hi Vipin,
Glad to know that you have heard good about me.
Can you try to upload the same file from some other system. If it doesnt work from any system, there might be some problem with the flat file. In that case, you can try to create a small and simple file and try to upload that.
You might also get this error if there is a blank line at the end of the file.
Hope this helps.

Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.

Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRi

Hi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Axis adapter : Bad Request error

Hi,
I have a File to SOAP scenario (PI 7.0) where I am using AXIS adapter in the receiver SOAP adapter for NTLM authorisation. In the xml that I am trying to post, i have characters like & because of which I am getting a Bad Request error. Is there a way to resolve this? thanks!
Regards
Pushpinder

In file sender channel, i am using binary mode, so no encoding specified.
I see the error in the receiver SOAP adapter -
Error Axis: error in invocation: (400)Bad Request
Error Exception caught by adapter framework: (400)Bad Request
Error MP: Exception caught with cause (400)Bad Request
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (400)Bad Request: (400)Bad Request.
Error The message status set to NDLV.

*** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.

Similar Messages

Maybe you are looking for