Error: Can't find Export file

Hi,
due to wrong bit budgeting, I rendered a m2v file again from PP with a lower variable bit rate. As before, I replaced the asset and tried to export the BluRay project into a folder on the hdd. But now, I am getting the above mentioned error message. I tried the newly rendered m2v file with ac3 sound in a new Encore project and it worked fine.
In the past, I had this error and fixed it by creating a new Encore project from scratch. But this project has slide shows multi page motion menus etc. and I am sick of doing this all over again. Does anybody have any idea?
Thanks
Claus

Little update: I took everything out of the project and deleted the corresponding files in the project folder. As soon, as I add a footage without any menu or slide show, the error occurs gain. This software is just crap. I had to build a new project with the same assets again and now it works...

Similar Messages

Dynadock V10 - " error can not find installation file" INSTALL ERROR

Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Getting error can not find xsl file at esb:///esb_projects/...

Hi,
I have one esb project 'A' that is invoking another esb 'B' that contains transformation. Routing rules are defined from server deployed service no soap service call. So in esbsvc file it puts xsl url as esb:///esb_projects/....
When i deploy A and test it, i get error unable to find xsl file in path esb:///esb_projects/...
I tried to look into this issue, it looks like all files are stored under temp_xxx_localhost directory.
did any one find solution for it?
Note: this issue will come only if you have transformation at B service.

Have you checked the logs in enterprise manager on deployment?
Can you run esb B independently? Again via the em choose the web service end point to test.
I have not had a problem with a missing xsl. You can create test cases for xsl transformations within JDeveloper which will enable to test the validity of you transformation. But, it sound like you are already beyond this point.

Getting error can not find xsl file esb:///ESB_PROJECTS/...

Hi,
I have one esb project 'A' that is invoking another esb 'B' that contains transformation. Routing rules are defined from server deployed service no soap service call. So in esbsvc file it puts xsl url as esb:///esb_projects/....
When i deploy A and test it, i get error unable to find xsl file in path esb:///esb_projects/...
I tried to look into this issue, it looks like all files are stored under temp_xxx_localhost directory.
did any one find solution for it?
Note: this issue will come only if you have transformation at B service.

Have you checked the logs in enterprise manager on deployment?
Can you run esb B independently? Again via the em choose the web service end point to test.
I have not had a problem with a missing xsl. You can create test cases for xsl transformations within JDeveloper which will enable to test the validity of you transformation. But, it sound like you are already beyond this point.

Can't find the file ?php echo $editFormAction; ? in XAMPP

I used the insert record function in CS4 on a page I'm working on. I'm running XAMPP in win XP.
Whenever I load the page into firefox, fill out the forms with random data, and click the submit button, I get the following error:
can't find the file at /C:/xampp/htdocs/MySite.com/<?php echo $editFormAction; ?>
I have been trying to research this a bit myself, and I think the problem may simply be that the editFormAction script is not in the root folder of my site. But I am not sure where it is, and so, what to change the reference to.
Or perhaps I'm completely wrong about this???
Please Help Me!!

Well, I have to chuckle a bit because the article on how to set up a php testing server that you wrote is the exact one I read to set up my testing server! It is very well written and probably the most helpful and straight foreward article on setting up dreamweaver with XAMPP on the web. I followed all of the instructions exactly, so I imagine the problem must be elsewhere? It's pointing to the C drive because that's where XAMPP is installed. This is how is it supposed to be setup, correct? Apache and MySQL are running, or at least it says so on the XAMPP control panel.
Also, I apologize for not posting this in the right forum. That was my first post on the adobe boards and I didn't really consider inserting records to a database to be an "application." So thanks for pointing me in the right direction.
for those who want to see my code, here it is. Except for the exact names of the fields, it's exactly what dreamweaver creates when youc click on the "insert record" button in the insert menu. I don't see any option for pasting the code as "code" like in most code devolpoer forums. I know some poeple get upset if you paste code without doing it right, so I hope I'm not making anybody mad.
the following is inserted in the head:
<?php require_once('Connections/GiftListConnection.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE ff SET EmailAddress=%s, Relationship=%s WHERE FirstName=%s",
                       GetSQLValueString($_POST['EmailAddress'], "text"),
                       GetSQLValueString($_POST['Relationship'], "text"),
                       GetSQLValueString($_POST['FirstName'], "text"));
mysql_select_db($database_GiftListConnection, $GiftListConnection);
$Result1 = mysql_query($updateSQL, $GiftListConnection) or die(mysql_error());
$updateGoTo = "ManageFF.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form2")) {
$insertSQL = sprintf("INSERT INTO ff (FirstName, EmailAddress, Relationship) VALUES (%s, %s, %s)",
                       GetSQLValueString($_POST['FirstName'], "text"),
                       GetSQLValueString($_POST['EmailAddress'], "text"),
                       GetSQLValueString($_POST['Relationship'], "text"));
mysql_select_db($database_GiftListConnection, $GiftListConnection);
$Result1 = mysql_query($insertSQL, $GiftListConnection) or die(mysql_error());
$insertGoTo = "ManageFF.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
mysql_select_db($database_GiftListConnection, $GiftListConnection);
$query_Recordset1 = "SELECT * FROM ff";
$Recordset1 = mysql_query($query_Recordset1, $GiftListConnection) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>
and then this is the actual form code in the body:
<p class="Bold">&nbsp Add new family member or friend...</p>
<form action="<?php echo $editFormAction; ?>" method="post" name="form2" id="form2">
<table align="left">
    <tr valign="baseline">
      <td nowrap="nowrap" align="right">FirstName:</td>
      <td><input type="text" name="FirstName" value="" size="32" /></td>
    </tr>
    <tr valign="baseline">
      <td nowrap="nowrap" align="right">EmailAddress:</td>
      <td><input type="text" name="EmailAddress" value="" size="32" /></td>
    </tr>
    <tr valign="baseline">
      <td nowrap="nowrap" align="right">Relationship:</td>
      <td><input type="text" name="Relationship" value="" size="32" /></td>
    </tr>
    <tr valign="baseline">
      <td nowrap="nowrap" align="right"> </td>
      <td><input type="submit" value="add" /></td>
    </tr>
</table>
<input type="hidden" name="MM_insert" value="form2" />
</form>
Thanks for trying to help out this noob, everybody!
BTW, this is Inkexit posting. For some reason when I logged in this morning, I was made to pick a new screenname, as inkexit was already in use. But I knew that though, as I was the one using it, lol. Kinda bizzarre. Perhaps the Mods should know about this?

Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

My home page is google and it works but when I open a new tab it displays an error message :Firefox can't find the file at chrome://quick_start/content/index.ht

I've made sure a dozen times that my home page is set correctly, and when I hit the home button next to the search bar it works and takes me right to google BUT whenever i open a new tab i get the error that my page cannot load and the web url that it keeps trying to remember is in the error message:
Firefox can't find the file at chrome://quick_start/content/index.html.
of course the last dot is not the url anymore but the end of the sentence for the error message, but i don't ever use chrome ever on my laptop only my cell so what is going on????? help fix god please!!!!!!

Do you have the FastStart extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT1923 I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi.

I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi. where is it suppose to be?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

Trying to install iTunes 8.0, can not find script file error

I recently tried to upgrade Win XP for iTunes 8.0, and got the following error msg:
can not find script file “C:\program files\uninstall scripts\quicksilver player 7.4\install.wsf”
HELP!
Tony

Hey Tony, you don't happen to work for a large aerospace company, do you? My guess is that you do, because I work at the same place, and the problem is with our company's distribution of quicktime. email me off list and I'll tell you how to fix it.
bralston at mac dot com

Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".

Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.

I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help!

Applescript "Finder got an error: Can't make document file"

I can get the file contents if I use choose file but if I do it this way, I get the error:
error "Finder got an error: Can’t make document file ... to file
Code:
tell application "Finder"
          set theFolder to (choose folder with prompt "Select the start folder")
          set file_list to every file of theFolder
          repeat with myfile in file_list
      log (name of myfile as string)
      set fileContents to read myfile
      set fileText to paragraphs of (fileContents)
      repeat with nextLine in fileText
          if length of nextLine is greater than 0 then
              log nextLine
          end if
      end repeat
          end repeat
end tell

Changing
set fileContents to read myfile
to
set fileContents to read (myfile as alias)
sorted it!

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
For the purposes of this I am going to assume you are using iPhoto '11.
Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
Select that album, then go to the File menu and select Export...
In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
Insert a blank DVD when prompted.
Let the finder complete the work and eject the disc afterwards.
That's it. Best of luck.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

Firefox can't find the file error when trying to download

I am currently not having luck when clicking on the download button for each app...This is the error message I get,
Firefox can't find the file at aam://SAPCode=AEFT?productVersion=12.0?passPhrase=Qx6qMfb9/oWx8agnabYz/ksL9vygzb30ZVZ6+4A KgbiDkQIEh1TTurmjLJXYoGHBdt97o64hQwef/EPa7zXT42z8iGzC7ZzUJWaBk1IID76maBwP1cEMXK0VB+DYo98sF gay7207mzeSwQIwGrMPLC+Ep78B13gEXvFdrr7Tg2I=.
I'm running ML 10.8.4 on 2010 Macbook Pro.
Thanks for any and all help.

clear your adobe.com cookies and retry.

Error: Can't find Export file

Similar Messages

Maybe you are looking for