Error clears remote info
Dreamweaver sometimes says something to the tune of "index
not found in site" and then clears my remote info. Wtf?
They should look in their own tech articles. I had the same problem and this solved it:
http://docs.info.apple.com/article.html?artnum=93061
With one caveat. The article talks about creating a shared folder in the Users folder, but I could not create it there even with Admin permissions. However, I could create it somewhere else and paste it into the users folder, the change the permissions.
Makes no sense, but seems to solve the problem!
Similar Messages
-
Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin WilsonHello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson -
AIP-52251: Error identifying remote trading partner at MLLP Exchange with
used HL7 over MLLP, one trading partner is EAI(B2B Localhost), another is EchoServer(a java application, the hostname is is4-nb4.corp.ha.org.hk). used a script to enqueue message. like below:
DECLARE
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
msg_handle RAW(16);
ipmsg b2b.IP_MESSAGE_TYPE;
xml_clob clob;
msg_id number(10);
subscribers dbms_aq.aq$_recipient_list_t;
BEGIN
select message_seq.nextval into msg_id from dual;
xml_clob := '<?xml version="1.0" ?><ADT_A01 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2005-08-16T16:52:26" CreatedBy="ECXEngine_826" GUID="{1A2726C6-B00E-DA11-8F7A-080020C8D296}"><MSH><MSH.1>|</MSH.1><MSH.2>^~\&</MSH.2><MSH.3><HD.1>EDI</HD.1></MSH.3><MSH.4><HD.1>PWH</HD.1></MSH.4><MSH.5><HD.1>EchoPac</HD.1></MSH.5><MSH.6><HD.1>PWH</HD.1></MSH.6><MSH.7><TS.1>20050804162010</TS.1></MSH.7><MSH.8 xsi:nil="true"></MSH.8><MSH.9><MSG.1>ADT</MSG.1><MSG.2>A01</MSG.2></MSH.9><MSH.10>TEST007</MSH.10><MSH.11><PT.1>#Property(ProcessingID)#</PT.1></MSH.11><MSH.12><VID.1>2.3.1</VID.1></MSH.12><MSH.13 xsi:nil="true"></MSH.13><MSH.14 xsi:nil="true"></MSH.14><MSH.15>AL</MSH.15><MSH.16>ER</MSH.16><MSH.17>#Property(CountryCode)#</MSH.17><MSH.18>ASCII</MSH.18><MSH.19><CE.1>ENG</CE.1></MSH.19></MSH><PID><PID.1>1</PID.1><PID.2 xsi:nil="true"></PID.2><PID.3><CX.1>A0000010</CX.1></PID.3><PID.4 xsi:nil="true"></PID.4><PID.5><XPN.1><FN.1>TEST, Patient 01_10</FN.1></XPN.1></PID.5><PID.6 xsi:nil="true"></PID.6><PID.7><TS.1>20001001</TS.1></PID.7><PID.8>F</PID.8></PID><PV1><PV1.1>1</PV1.1><PV1.2 xsi:nil="true"></PV1.2><PV1.3 xsi:nil="true"></PV1.3><PV1.4 xsi:nil="true"></PV1.4><PV1.5 xsi:nil="true"></PV1.5><PV1.6 xsi:nil="true"></PV1.6><PV1.7 xsi:nil="true"></PV1.7><PV1.8 xsi:nil="true"></PV1.8><PV1.9 xsi:nil="true"></PV1.9><PV1.10 xsi:nil="true"></PV1.10><PV1.11 xsi:nil="true"></PV1.11><PV1.12 xsi:nil="true"></PV1.12><PV1.13 xsi:nil="true"></PV1.13><PV1.14 xsi:nil="true"></PV1.14><PV1.15 xsi:nil="true"></PV1.15><PV1.16 xsi:nil="true"></PV1.16><PV1.17 xsi:nil="true"></PV1.17><PV1.18 xsi:nil="true"></PV1.18><PV1.19><CX.1>10010</CX.1></PV1.19></PV1></ADT_A01>
subscribers(1) := SYS.AQ$_AGENT('b2buser', null, null);
message_properties.RECIPIENT_LIST := subscribers;
ipmsg := b2b.IP_MESSAGE_TYPE (msg_id, null,'EAI','EchoServer','Echo_ADTA01_Process', 'ADT_A01', '2.3.1', 1, xml_clob, null);
dbms_aq.enqueue(queue_name => 'b2b.IP_OUT_QUEUE',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => ipmsg,
msgid => msg_handle);
commit;
END;
show errors;
then go to the B2B Report tab, can see two message like below
EAI EchoServer MLLP - 1.0 HL7 - 2.3.1 Echo_ADTA01_Process WaitFA 2007年11月12日 星期一 下午05:51:37
Acknowledgement Invalid 2007年11月12日 星期一 下午
and in the log file, like this:
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage Could not find a Trading Partner with MLLP ID = is4-nb4. Please check the Trading Partner Identification section of your Trading Partner
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:247)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin:decodeIncomingMessage identify trading partner by MLLP Id failed for is4-nb4 with ExceptionError -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (ERROR) Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
at oracle.tip.adapter.b2b.exchange.mllp.MLLPExchangePlugin.decodeIncomingMessage(MLLPExchangePlugin.java:257)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1177)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
at java.lang.Thread.run(Thread.java:534)
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {From=is4-nb4, FromIP=160.19.23.102, FARequired=true, protocolVersion=1.0, ToIP=160.19.55.114, Port=4911, Message-Id=1194861102002-1207274363, protocol=TCP, To=is4wingw02}
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning true
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error Set
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA processed by HL7
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:createFA Not creating an ACK for an incoming ACK Message
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA B2BMessage is null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: createAndSendFA Exit
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA Sent
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2007.11.12 at 17:51:43:064: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2007.11.12 at 17:51:43:080: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 1194861102002-1207274363
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>A0133772116334587C90000068CD8000</b2bMessageId>
<errorCode>AIP-52251</errorCode>
<errorText>Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4</errorText>
<errorDescription>
<![CDATA[Machine Info: (is4wingw02)
Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-52251: Error identifying remote trading partner at MLLP Exchange with MLLP ID is4-nb4
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2007.11.12 at 17:51:43:096: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2007.11.12 at 17:51:43:111: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
here said not find the remote partner, but in B2B server, can ping Echoserver.
what is wrong?Hello again,
I have tried all different combinations with the IP addresses and host names, but to no avail. Then I changed the Trading Partner Identification Type from MLLP Id to Sending Application (one of the customer requirements is to be able to identify the Trading Partner by the combination of Sending App/Sending Facility, since they are running multiple HL7 applications on one host). However, I still see the same error in the log file - for some reason, B2B is still trying to identify the Trading Partner by the MLLP Id. Redeploying the configuration didn't help, the requested identification type is ignored.
Please help! If needed, I can send the B2B log file, but maybe I'm missing something obvious.
BTW, the customer has installed the patch for bug 6439217 on October 10th. The B2B version is 10.1.2.2.0.
Thanks in advance! -
sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Error during install "$error.Clear();
Hi everyone,
Next error popped up while installing exchange 2013:
The following error was generated when "$error.Clear();
if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
$dispname = "Microsoft Exchange";
$mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
if ( $mbxs.length -eq 0)
$dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
$arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
$sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispname )
set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
# No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
# This can be remove after BUG(O15#2555914) is fixed.
if ($sysMbx.RetentionPolicy -eq $null )
$arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
else
write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
I can't find where it goes wrong. Can anyone help me?
ThanksHi,
Please check the homeMDB attribute of the system mailbox "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}", make sure the homeMDB attribute points to the correct mailbox database.
If the value of homeMDB attribute is ok, please recreate this system mailbox to check result.
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support -
Duplicated exchange protocol message error on Remote TP implement Sync Res
I am (MyCompany) send the business message and receive the corresponding business response from remote TP, but got error as the following,
Error Code B2B-50081
Error Description Machine Info: ( Acme) Description: Duplicated exchange protocol message error - Original B2BMessageId = C0A802111322965DEA30000050D092D0-1
I need your help!
Regards,
SanAnuj,
this is message id send to remote TP
Id C0A80211132296566E80000050D091E0
Message Id C0A80211132296564FA0000050D09120
Business Message C0A80211132296566D80000050D09170
Packed Message Packed Message
Payload Payload
Protocol Message Id @C0A80211132296566E10000050D091A0
Refer To Protocol Message Id
Protocol Collaboration Id @C0A80211132296566E10000050D091A0
Protocol Transport Binding SOAPAction="ebXML" http.sync=true timeout=300000 Content-Type=multipart/related;type="text/xml";boundary="----=_Part_65_1555520695.1314954503907";start="<ebxheader-C0A80211132296566E00000050D09190>" Content-Length=2483
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
And message id received from remote TP
Id C0A802111322965DE260000050D09280
Message Id C0A802111322965DE260000050D09280
Business Message C0A802111322965DEA40000050D092E0
Packed Message Packed Message
Payload Payload
Protocol Message Id M1314954587133.5826024@tcgws02_te4502442803846285853
Refer To Protocol Message Id @C0A80211132296566E10000050D091A0
Protocol Collaboration Id @C0A80211132296566E10000050D091A0
Protocol Transport Binding SOAPAction="ebXML" User-Agent=haboob/5.5.1.0.1 build-2636 Host=xx.xx.xx.xx:xxxx Content-Type=multipart/related; type="text/xml"; boundary="----=_Part_30558_29196552.1314954587139" Connection=close Content-Length=3237 MSG_RECEIVED_TIME=Fri Sep 02 16:08:54 ICT 2011
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
Thanks for your help.
San
Edited by: user7914871 on ๓ ก.ย. ๒๕๕๔, ๑๑:๔๙ น.
Edited by: 7914871 on ๕ ก.ย. ๒๕๕๔, ๑๔:๑๓ น. -
Error while creating info object
error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALLHi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis -
Hi,
Any help appreciated!!
I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app. I get the error on this line:
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
See code below
I created a high trust development environment following the instructions provided here:
http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
http://msdn.microsoft.com/library/office/fp179923
I created a provider-hosted app with the intent to:
create a SharePoint list in the appweb
Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint. (No changes were made to tokenhelper.cs and sharepointcontext.cs)
retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
What happens:
The app is deployed successfully to the Dev site
The SharePoint feature is deployed and activated
The default.aspx page of the remote web loads
The error (see image) is returned on clicking of the button
My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
The code block below is a copy of the default.aspx code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using Microsoft.SharePoint.Client;
using Microsoft.IdentityModel.S2S.Tokens;
using System.Net;
using System.IO;
using System.Xml;
using System.Data;
using System.Xml.Linq;
using System.Xml.XPath;
namespace Idea.GeneratorWeb
public partial class Default : System.Web.UI.Page
SharePointContextToken contextToken;
string accessToken;
Uri sharepointUrl;
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
protected void Page_Load(object sender, EventArgs e)
//// The following code gets the client context and Title property by using TokenHelper.
//// To access other properties, the app may need to request permissions on the host web.
var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
//var spContext = new ClientContext("MySPDevInstance");
//spContext.Credentials = new NetworkCredential("username", "password");
//using (var clientContext = spContext.CreateUserClientContextForSPHost())
// clientContext.Load(clientContext.Web, web => web.Title);
// clientContext.ExecuteQuery();
// Response.Write(clientContext.Web.Title);
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
if (contextTokenString != null)
// Get context token
contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
// Get access token
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
// Pass the access token to the button event handler.
Button1.CommandArgument = accessToken;
protected void Button1_Click(object sender, EventArgs e)
// Retrieve the access token that the Page_Load method stored
// in the button's command argument.
string accessToken = ((Button)sender).CommandArgument;
if (IsPostBack)
sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
// REST/OData URL section
string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
// HTTP Request and Response construction section
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
request.Method = "GET";
request.Accept = "application/atom+xml";
request.ContentType = "application/atom+xml;type=entry";
request.Headers.Add("Authorization", "Bearer " + accessToken);
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
// Response markup parsing section
XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
XNamespace atom = "http://www.w3.org/2005/Atom";
XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
List<XElement> entries = oDataXML.Descendants(atom + "entry")
.Elements(atom + "content")
.Elements(m + "properties")
.ToList();
var entryFieldValues = from entry in entries
select new
Character = entry.Element(d + "Title").Value,
Actor = entry.Element(d + "Diagram").Value,
CastingStatus = entry.Element(d + "SharingStatus").Value
GridView1.DataSource = entryFieldValues;
GridView1.DataBind();
Any ideas what I might be doing wrongHi ,
Use the below code
Public string GetAccessToken(){
string sharePointSiteUrlHost = Page.Request["SPHostUrl"].Tostring();
string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
return accessToken;
Than initialize the ClientCOntext with the below Method
private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
ClientContext clientContext = new ClientContext(targetUrl);
clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
clientContext.FormDigestHandlingEnabled = false;
clientContext.ExecutingWebRequest +=
delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
"Bearer " + accessToken;
return clientContext;
use this clientCOntext and it will work.
Do not use
SharePointContextProvider
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer -
I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
Any advice welcome.To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
You may dinf soem of the articles here useful:
http://www.apple.com/support/ipad/syncing/ -
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??
iOS: Troubleshooting Personal Hotspot - Apple Support
-
Error in Remote-Communikation | caught TrexNet exception
Hello BIA experts,
we got this error 4 times and don´t know what´s the reason(from RSPC):
12.01.2009 15:33:57 Loading data to index BWP_BI0:SMAT_PLANT (records '0000318655', job '0' )
12.01.2009 15:44:16 Characteristic 0MAT_PLANT: 0 data records in version M deleted from table /BI0/QMAT_PLANT
12.01.2009 15:44:16 Index for table '/BI0/SMAT_PLANT' is being processed
12.01.2009 15:44:16 Index '/BI0/SMAT_PLANT' for BIA index deleted
12.01.2009 15:44:16 Index 'BWP_BI0:SMAT_PLANT' for BIA index created
12.01.2009 15:44:16 Execute rollback
12.01.2009 15:44:16 Rollback for index 'BWP_BI0:SMAT_PLANT' executed
12.01.2009 15:44:16 Runtime (ms): RFC server:58, BIA client:58, BIA Kernel: 0, ABAP RFC: 60
12.01.2009 15:44:16 Error in Remote-Communikation with partner http://[blade02]:30003/indexCellTable
12.01.2009 15:44:16 Job cancelled after system exception ERROR_MESSAGE
In the rfc alert trace there is no relevant error at this time. This error is independent from the blades because i moved the affected index to another blade. The result was the same.
I only can see an error in the IndexServerAlert trace:
2009-01-12 15:34:42.475 e SERVER_TRACE TRexApiIndexDocuments.cpp(09363) : start rollback bwp_bi0:smat_plant user=[user]
2009-01-12 15:34:42.489 e Trex_SE FuzzyOptimizer.cpp(04135) : start rollbackOptimize for index bwp_bi0:smat_planten
2009-01-12 15:34:42.508 e Trex_SE FuzzyOptimizer.cpp(04229) : rollbackOptimize for index bwp_bi0:smat_planten finished rc=0
2009-01-12 15:34:42.518 e SERVER_TRACE TRexApiIndexDocuments.cpp(09397) : finished rollback bwp_bi0:smat_plant rc=0
2009-01-12 15:34:53.213 e Service TrexService.cpp(01283) : caught TrexNet exception in method : Protocol//request begin identifier is invalid
In the syslog on BI I can see this error:
15:44:14 BWP82 BTC 007 010 BWBATCH TR 1 TREX_ICM-Receive_Error; return code = 402, return text = ICM_HTTP_TIMEOUT
I don´t know why I get here an ICM error, the BIA is so configured that it just uses the RFC connection to the backend system. There is also no error in the ICM traces in SMICM.
I only found a note(1092151) but this note doesn´t match to us because we already have SP15 in the backend system.
Thanks in advance!
Best Regards,
Jens
Edited by: Jens Gleichmann on Jan 13, 2009 8:15 AM
Edited by: Jens Gleichmann on Jan 13, 2009 11:52 AMHi Marc,
thanks for your reply.
Yes, I already found this note, but I can´t found a problem in the configuration of the ICM. It´s very strange if we rerun the process chain than it works. It´s not only one index which has the error, there are now 3 indizes which have the error.
This process chain also run in the year 2008 and from my team didn´t change anything on BIA or ICM.
In SMICM I can´t find any log about this errors. Is this actually logged by the ICM? Does it help if I set the trace level higher?
The error can be reproduced at all 4 blades.
Here an other error:
Prozess 'Initiales Aktivieren und Füllen von BIA-Indizes ',
Variante 'BIA-Index aktivieren und initial füllen für MM_I_I' hat
Stat us 'fehlerhaft beendet ' (Instanz
'BIBIA4CI394JSTM6Q9TLJG99P5PNHC ')
in English:
process 'initial activate and fill of bia-indizes'
variant 'BIA-index activate and fill for MM_I_I' have
status 'finished with error' (Instance
'BIBIA4CI394JSTM6Q9TLJG99P5PNHC ')
Best Regards,
Jens
Edited by: Jens Gleichmann on Jan 15, 2009 7:47 AM -
SMTP error from remote mail service
I am receiving a error that states"SMTP error from remote mail service" This is my work e-mail that is a out look e-mail service--but was put on my laptop in mozilla. If I test send e-mails to my gmail, aol and the work e-mail the work e-mail goes through (on the mozilla) but I get the error report for the gmail and aol test.
''Matt [[#answer-672468|said]]''
<blockquote>
what is the complete error message please.
</blockquote>
Hi Matt--thank you for reaching out to assist--here is the full error message I receive when I attempt to send emails--
SMTP error from remote mail server after end of data:
host p3nlsmtpcp-v01.prod.phx3.gdg [72.167.191.78]:
552 5.2.0 bT641p03m3RZ6FL01 :: CPANEL :: Message rejected for spam or virus content ::
Please include this entire message when contacting support ::
v=2.1 cv=Yecz5mhf c=1 sm=1 tr=0 p=dXr4a0FlAAAA:8 a=9P+wmFvZGoNcfX5LD2dIAQ==:117 a=9P+wmFvZGoNcfX5LD2dIAQ==:17 a=TZb1taSUAAAA:8 a=xSRs65CQCjkA:10 a=IkcTkHD0fZMA:10 a=o1OHuDzbAAAA:8 a=YNv0rlydsVwA:10 a=AK46IGkTethYI5b8t1AA:9 a=QEXdDO2ut3YA:10 a=RBqHpAr1aNgA:10 a=SZlYXZE0WA8A:10 a=POQKUN4lQn8A:10 a=5LQJebhDX5EA:10 a=lWHhIcKi20EA:10 a=AP_QpuyW5RgA:10 a=_ZmE1jEfA50A:10 a=fVc70mvjwYYA:10 a=BfRt8DTvoOQA:10 ::
100.00 -
Hello BIA experts,
last Saturday my process chain aborted. The reason in the application log (SLG1) was:
Error in remote-communication with partner http://<blade>:30003/IndexCellTable.
At first I thought the rfc connection or the index service was not available, but in both logs are no entries for this time.
The system runs with Rev48 and this is the first time this error occured.
Any ideas?
Best Regards,
JensHello Vitaliy,
I mean there are entries in the log files, but not for this date and time. I looked into the traces TrexIndexServerAlert, TrexNameServer_History, TrexRfcServerAlert, TrexRfcServer and TrexTCPClientAlert. I couldn´t find any information.
Since 3 weeks we run with Rev48 and I never get an error like this.
I will have a look at this, if it occurs again I´ll create an OSS.
This is not the first time this cube is indexed.
This is something I found also in the application log:
Creation of the BIA index for InfoCube 'FACPRJPRD' terminated while filling (RSD_TREX (Messages from TREX Aggregate Area))
Thanks for your answers
Best Regards,
Jens
Edited by: Jens Gleichmann on Nov 4, 2008 7:35 AM -
Hi Everyone,
I am connecting to an external web service from my biztalk application through a dynamic send port.
When my biztalk application is trying to send the request message to the web service through the send port, I am getting the following error :
The remote server returned an error: (403) Forbidden.
The external web service team have provided a certificate and a private key to install in my server.
I have installed the certificate by double click the .pfx file using the private key and have added the certificate in the host ProcessHostx64.
Still i am getting the same error.
Can someone help on this issue ?
Many Thanks,
Anand
S B AThe Private Key should be installed under the user running the BizTalk Server Host. Please confirm that you have done this?
If so, try to make this work in a small .NET test Application before porting it to BizTalk, so that you can confirm that you do have sufficient credentials to call the Service.
Morten la Cour
Maybe you are looking for
-
Currency unit in Report painter
Hi, I met a problem when i maintain a report using report panter. Table FAGLFLEXT is used for the library, and I want to using currency translation function. I use Basic key figure "HSL local currency" and CC_HSL translation local currency for the re
-
Unable to create a connection in SQL developer
hii I'm unable to create a connection in SQL developer..it says I/O Exception, Network Adapter could not establish a connection...i provided the username and password which i used for SQL*Plus, which is working fine. And i gave the host as localhost.
-
Opening pdf in browser requires a retry
I just updated to the newest version of Reader 10. On Windows 7 Home - 64 bit, using Internet Explorer 9 - 32 bit, now when I click on a pdf link from within the browser, the pdf does not immediately load. Instead I see a gray Adobe screen often wi
-
Transaction FAGLF101 makes it possible to rock accounts 401 towards accounts 404. This transaction turns in monthly J+1 in closing. On the other hand, how does this transaction determine the amounts? Indeed, we note that the amounts do not rebouclent
-
HELP..Using BufferedInputStream
Hi I am trying to send a video file (.mpg) from a tcp server written in C to a tcp client written in Java. The server seems to be sending the bytes accurately. But on the JAva client end, the bytes are recived but each time the numbers of bytes reciv