Error code 49.231 and 49.2f9d

I have a HP3005N serial no. CNG1T00289 Firmware 20131017 02.180.1 that is giving the following error codes 49.231 and/or 40.2f9d, and then it stops printing. I will take any and all suggestions
email [email protected]

Error 49 usually signifies a firmware error (which could be due to a formatter problem), but it can, in some cases, be invoked by some system sending a 'rogue' job (not necessarily a conventional print job) to the device.
See thread http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/LJ-Pro300-color-MFP-M375nw-Power-cycling-d...

Similar Messages

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

What is error code 3014? And How to fix it?

What is error code 3014? And How to fix it?

Error code 3014 is covered on this page : http://support.apple.com/kb/TS3694 - click on '3014' in the list of errors at the top of the page and it should take you to some troubleshooting for it ('network connection or download errors')

I keep getting an error code of 403 and it won't let me into my account.

I keep getting an error code of 403 and it won't let me into my account.

I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Error Code EF01, Video and Digital Audio Dropping out

To whom it concerns,
A customer of mine is having problems with his Fios DVR. He will be watching TV through his Integra DTR 40.3 receiver, connected via HDMI cable and his picture and audio will just stop. This is always accompanied by a code that displays on the front panel of the DVR which reads EF01. The customer is usually able to restore picture and audio by performing a power cycle on both the AV receiver and the Fios Box.
There have been numerous occasions of this problem occurring. Sometimes it happens quite frequently, (once every 10 min) other times much more infrequently. Also the problems vary in their severety. Sometimes just the digital audio will drop out but the pitcure will remain. Other times the picture and audio will go out and they will damage the HDMi input that the Fios box is connected to, rendering it unusable. We have since repaired the Integra recevier twice. This last repair we haven't had an incident for 3 months, now we are back to losine Audio and Video.
The customer initially had the Fios DVR replaced, but as the incidents kept happening, we tried repairing and replacing the AV receiver. I keep coming back to that error code because I don't know what it means and nobody can explain to me if it has any significance or bearing on the problems we are having.
Does anybody know what the EF01 error code indicates on the Fios DVR? Has anyone had problems similar to the one I am describing, regarding HDMI video/audio loss?
Thanks,
Kelly White

Hey, Jared here.
The EF01 error code means that either the CableCard inside the box isn't getting any signal, or the CableCard isn't sending out any signal. A really efficiant way to see exactly what they problem is, is to take the box to a another location where Fios tv works fine.
There are two possible outcomes:
Either the box doesn't work, and is still displaying the EF01 error code. Than the issue is with that box, and I must be replaced.
The other possibility is that the box works fine. The error code goes away, and the box works perfect. If this is the case, we know it is the coax wires coming from ONT (Optical Network Terminal). And a Service Technician is required to come out and address the issue.

IDispatch error codes 5056, 1590, and 1557 makes hfm Srvr registration fail

I have installed EPM 11.1.1.2 and configured everything successfully except for Financial Management. When configuring Financial Management the Server/Cluster registration fails and I can't deploy to the imbeded App Srvr.
the hfm-config.log file shows the following Failed entries; How do I find out what IDispatch error codes 5056, 1590, and 1557 are?
(Thu Jul 30 17:58:53 2009) Failed to register cluster epm. Line:1438 File: .\CHFMConfig.cpp Error code:0x800415c0 Error: IDispatch error #5056
(Thu Jul 30 17:58:53 2009) Cluster registration failed. Line:1452 File: .\CHFMConfig.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:57:50 2009) Successfully set the user to DCOM limits
(Thu Jul 30 17:57:50 2009) Attempting to register the cluster/server
(Thu Jul 30 17:58:53 2009) Failed to set register Servers and Clusters. Line:536 File: .\CHFMConfigUtil.cpp Error code:0x80040836 Error: IDispatch error #1590
(Thu Jul 30 17:58:53 2009) General Error. Line:827 File: .\CHFMConfigUtil.cpp Error code:0x80040815 Error: IDispatch error #1557

Error codes for install and uninstall

Hello I have Adobe reader 10.1.6 on my computer but it will not load I get 2 error codes a 2503 and 2502 if I try to uninstall the programe i get the same codes can you help

Use the Acrobat Removal Tool http://labs.adobe.com/downloads/acrobatcleaner.html
Note that this will also remove Acrobat, if you have it installed.

Office 2013 C2R - Access denied to installation source from workgroup PC (Error Code 5-4 and 17002)

I have set up Office 2013 Home and Business on a network share using the Office Deployment Tool.
Domain members can install Office 2013 with no problems using the command line
\\Server\share\Office2013\setup.exe /configure
\\Server\share\Office2013\configuration-home-and-biz.xml
However, if the PC is not a member of the domain I get an Access Denied message, even though "everyone" has full control of the share and NTFS files and subfolders
The full message is as follows,
Access denied to installation source
Sorry, we ran into a problem accessing a required file. Please check that the installation source has correct permissions, the try again.
Go online for additional help
Error Code: 5-4
As soon as I join the PC to the domain the installation works but I would like to pre-install Office as part of an MDT Task Sequence before the PC joins the domain.
Does anyone know how I can make this work?
The Office setup log shows a different error code
03/05/2014 16:23:24.834 SETUP (0xe38) 0xec0 Click-To-Run apx75 Monitorable TryLaunchClient::HandleStateAction: C2R Client returned failing error code 17002
FYI: My config xml file contains the following
<Configuration> <Add SourcePath="\\Server\share\Office2013\" OfficeClientEdition="32" > <Product ID="HomeBusinessRetail"> <Language ID="en-us" /> </Product> </Add> <Updates Enabled="TRUE" UpdatePath="\\Server\share\Office2013\" /> <Display Level="Full" AcceptEULA="TRUE" />  <Logging Name="OfficeSetup-*.txt" Path="%temp%" /> <Property Name="AUTOACTIVATE" Value="0" /></Configuration>
Thom McKiernan (UK) @thommck | thommck.wordpress.com | MCSA | MCTS

C2R editions of Office, during the installation routine, will initially commence execution in the security context of the logged in user, but partway through the installation routine the installation transitions into the security context of the local computer
account. This means that unless the computer account also has network access permissions to the installation source folder/share, the installation routine will fail.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx#PrepareDeploy
Important:
The computer account for the computer on which you install Click-to-Run for Office 365 products must have read permission to the network share that contains the Office Deployment Tool, the customized Configuration.xml file, and the Click-to-Run for Office
365 product and language files. If you cannot give read permission to the computer account, you can copy the files down to the computer from the network share, and then run Setup from the computer. After the installation is complete, you can delete those files
from the computer.
To workaround this, your installation script routine can copy the installation source files from the server folder/share to a local folder on the computer, then launch the setup routine from that local source.
In your example scenario, the workgroup computer (because it is not a member of "DOMAIN\Authenticated Users" does not have access permissions to the server folder/share.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Error codes 43401, 13999 and 25400 when trying to log in on mobile app

I keep getting these error codes when trying to log in through my mobile app. 43401, 13999 and 25400. The user name and password are correct. I have deleted / uninstalled the app . Restarted the phone. Nothing seems to work.

Hi suzyrhodes64 -
I pulled up your account & see that a ticket was opened. A tech should reach out to you shortly.
I also am looking into the source of your errors as well. I believe you are using the correct username when logging in, but can you please try resetting your password: https://login.comcast.net/forgotpwd/reset?execution=e1s1
Thanks,
Rachel

I tried to charge my iPod Touch 5th generation but it died while charging and it was tuning and it said i had to connect to iTunes so i did and i had to restore it to use it and while restoring an error code (9) appered and i can't use it. Plz help

   So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
                    Thank you,
                                       Zac

Zac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software

Ok back again with 55 error code endless on and off loop

So a few days ago i decided to clean up the computer. Removed/reinstalled/cleaned video card, 2 fans attached to a tall finned CPU cooler (to clean out the cooler fins) with q-tip and compressed air can, and remove filters and some fans to clean. All done with comp air cans and q tips. Had my anti static wristband attached and on a clean table with tile floors. Had to remove 2 sticks of RAM to get one of the fans.
Also decided to add an ssd while i was at it. All went well except i couldn't get into the bios. Booted to windows fine but hung just after del key press just b4 bios setup. Posted in the Bios section for help and I was told to disconnect all hdd's and optical drive and try again. That worked. Reconnected optical...didnt work. Tried just HDD and it worked. Re connected the optical and it worked. Used the same ports as original (when this all started) and it worked. Weird but good to go. Connected SSD, configured windows to "see" the drive, all is good. Then I disconnected the computer, cleaned up a little of the wiring after the new ssd install (nothing was removed or reconnected) and one fan. Put the covers back on reconnected cables and went to bed.
The next day I go to turn on the computer and i get the dreaded 55 error code and have an endless 3-5 second loop of on and off before it even gets to the splash screen. TV shows nothing. Tried CMOS clear every which way. nothing. Disconnected all components except for 1 ram, and CPU....still nothing. Tried several sticks of ram in each. Nothing works. Tried different PSU's...same thing. Disconnected all USB cables, Mouse, and case switches, same thing. Bench tested mobo with different power supply same problem. Tried different power cords still no worky.
I dont know what to do. The mobo is still under warranty. Idk what I did to make it do this. Static, short while reconnecting audio out to a home amplifier. Static while cleaning up wiring? tried bios a and b, neither work.
Please help...I'm about to just go buy a new board and send this one back and have a spare.

When I had the original problem, (not getting into the Bios but booted to OS fine) at the end of disconnecting and reconnecting, I had the HDD and Optical and new SSD connected like original and it worked when it didn't before being connected the same way. Just chalked it up to maybe not connecting something completely.
Now I'm starting to think the problems are related
So it worked BEFORE this latest problem. All I did then was add some zip ties to the new SSD cabling and put the panels back on. Didn't check to see if it worked after that, just assumed it did since I didn't do anything of significance.
Then this. I did think about the can of comp air and yes it can do that. I thought I was being careful enough to not let it do that with just short bursts.
I have not tried to remove and re-seat the CPU yet. I will try later and inspect the pins. At this point I think it can be attributed to one of the following things:
1. The EVO Hyper 212 did kind of twist a little (it always has a little when pressure is applied) and bent a socket pin. When I put the panels back on I did have to clean up one of the push/pull fan wires and did twist the EVO a little.
2. Something shorted/is shorting the board to do with the SATA connections. Maybe the SATA plug to board connection.
3. Compressed air shot out some frozen water and corroded some connection somewhere over night.
4. When plugging in the audio OUT from the back of the board to an amp Stereo L & R IN (converts to Surround Sound), the Amp was on and this jolted the board.
5. The compu-gods have decided to brick my mobo so as to have an excuse to buy a new one.
3 things I have learned. 1. Get a water cooler and not use the big tower coolers. 2. Don't use compressed air especially in swamp-ass Florida. 3. Make sure the crap you plug into the computer is OFF.

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

Error Code 150:30 and then 213:5

I purchase my Adobe Illustrator CS5 in 2011. It worked good until recently then I got an error code 150:30. Tried to fix it but then got an error code 213:5. Called Adobe customer support and they could ot help; then they directed me here for help? All I am trying to do, is to get my CS5 Illustrator operational again...didn't realize that I was gone to get a run-around. Does anyone know how to fix or get around these dumb error codes?

Probably your best bet is to uninstall and the reinstall the application (being sure to delete the Preferences when uninstalling). It might also help to run the Cleaner tool in between.
http://www.adobe.com/support/contact/cscleanertool.html

I can't install itunes 10.6 after download I'm getting error code 2324? and itunes stopped working?

After downloading the update package and trying to install it, the installation didn't work with error code 2324, and i can't open itunes on my laptop anymore?

First of, what sort of system have you got. (Right-click My Computer in the start Menu and select properties) There are two flavours of Windows 7 x64 OEM (original equipment manufacture) One is a total x64 system for the OS and all programs. The other runs x64 address space for the OS and x32 address space for programs. I had exactly the same problem with my system and microsoft office. Roll back (using the recovery console to rewrite all the original registry values before you upgraded will give you a clean system for the upgrade). The upgrade itself should recognise the correct upgrade version for you automatically. However, sometimes it fails to do this due to data corruption. Go here- http://www.apple.com/itunes/download/ and manually download what you need. after download Right-click the file and select "properties" and click on "unblock" box in lower right corner. close, Then right click the file again and select "Run as administrator". If u still have problems, reboot into Safe mode. Uninstall itunes. Reboot again to safe mode. Disconnect from internet and disable any 3rd party system watch and antivirus programs. Reinstall itunes, then reboot normally. If the problem still persists run a system diagnostic check using "Problem Reports and Solutions" from in Control Panel. Let me know how you get on.

Error code 49.231 and 49.2f9d

Similar Messages

Maybe you are looking for