Error code: -6 (Card terminal error)
Hi Guys,
Any idea why am I not able to connect to the card using JCOP Tool ? Whenever I try to connect I get this error,
- /terminal "winscard:4|Identive CLOUD 4700 F Contact Reader 0"
--Opening terminal
/card -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: The user-specified timeout value has expired.
Unexpected error; aborting execution
/cardresetCard with timeout: 0 (ms)
--Waiting for card...
jcshell: Error code: -6 (Card terminal error)
jcshell: Communication problems: The user-specified timeout value has expired.
Please advice.
Thank You
--Charan Chakravarthi
does the card response to
/term
/atr
Similar Messages
-
I get an error code, 500 Internal Server Error when I try to open Safari. How do I correct it or somehow remedy this?
Hello Thomas,
Thank you for the details of the issue you are experiencing with Safari when using Wi-Fi. I would be concerned about this too.
I recommend following the steps in the section labeled "Symptom: My Mac does not connect to the Internet" in the following article to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M. -
Error code = 601; message="An Error happened during call of MaxDB Tool sdbi
I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks,
NandoI'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks,
Nando -
H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. -
Trying to register with ePrint and getting error code.Ajax submit failed: error = 403, Forbidden. I need help??
To bypass this error attempt either a restart of your computer, or use an alernate broser such as firefox or chrome. If you already have another browser the latter may be the easier fix.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
Error code 500 internal server error
I got a computer from my brother. It has windows 7 starter on it. It has been running fine, but now it says that the Microsoft teredo tunneling adapter driver is not working. It also gives me an error code 500 internal server error, when I try to search
for album information on windows media player. I don't understand IT jargon so can someone help me with this in plain English.Hi,
Could you please have a share with the event log information? Reference for
opening Event Viewer.
What information appears in event logs? (Event Viewer)
For the Microsoft teredo tunneling adapter driver, take a try to uninstall and then reinstall it in
Device Manager.
Error code 500 internal server error, if possible please have a share with a screenshot for this error message.
As it states, the error is based on the server side.
Here is a similar thread for reference:
Windows Media Player Script Error while looking up album info
Best regards
Michael Shao
TechNet Community Support -
HTTP Error Code 500 Internal Server Error creating connection
Hi, i have an error when i try to create a database connection
i have windows 7
php 5
mysql 5
if i try to connect to mysql with a icode i gererate it connects perfect.
if i use for example ems mysql manager it connects perfect to the databases
but when i try to create a connection in dreamweaver it appears:
HTTP Error Code 500 Internal Server Error
i dont know what to do.
i have done a lot of steps for solve other errors:
- chance mysql passwords for old_password
- remove cache file
any idea ??
thanks.I would look at your log files on your server to see what is the issue.
You most likely will have a php error log and a server error log. That will point you in the right direction. -
Hi, I have several times tried to install ABAP Trial, but failed.
So I need your help.
As soon as I set up XP, I download and install the newest Java, then started installation of ABAP Trial.
But at the end I just get an error message as belows.
I hope you will guide me correct direction.
Thanks for reading & Have a good day!
(Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Jul 11, 2008 7:43:08 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Jul 11, 2008 7:43:08 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi YUN SEOK,
I got the same error than you when I tried to install SAP NetWeaver ABAP Trial Version.
Could you help me in giving exactly the link you wrote.
https://www.sdn.sap.com/irj
Where is located exactly the answer ?
I looked at this link but I did not find the answer.
So could you give me exactly the location in this link ?
Thanks in advance.
STD, -
Help!
When trying to deploy a test system i got the following error:
Error Code:-17500
Unknown System Error in TestStand - Read Seq Files in Workspace.vi->TestStand - Find Dependent Files.vi->TestStand - Add File and Dependent Files.vi->TestStand - Add All TestStand User Files to File Info Array.vi->TestStand - Update File Info.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
I then tried to re-deploy previously successfully deployed systems - same error. (I have done nothing to my teststand setup/installation/engine or deployment files since the last successful deployment)
I removed teststand & then re-installed it - i still got the same error. These files it is searching for do not exist on my pc.
Any ideas what has gone wrong/how to fix it?
cheers
FiI've just had exactly the same problem and after posting a message, have been forwarded to this thread. Luckily it looks as though we've found a solution, or a cause of the problem. One of my work colleagues (SercoSteve on discussion forums) suggested removing the Teststand 3.1\cfg directory, and replacing it with a default one from another machine, and this seems to have done the trick and made the deployment wizard be able to analyse the files and build. We are editing files in cfg so I've now got the task of replacing each file in this directory one by one to find which is causing the problem.
I'll add another post when I find out which one it is.
David Clark
CLA | CTA
CLA Design Ltd
Hampshire, England -
HTTP Error Code 400 Bad Request error when connecting to SQL db
I realized I should move this to a new post since it was a new question...
I am trying to connect to a distributed SQL database from CS4.
Let me show you how the connection is built... and then maybe someone can tell me what I am doing wrong...
First I go to the database panel:
I click on the '+' sign to add an MS SQL Server Connection:
That brings up the SQL Server Connection window where I am supposed to replace the placeholders with my server values:
After I enter the correct values and click test, I get the error (HTTP Error Code 400 Bad Request)... These values work from SQL Server Management Studio on the same PC.
Just as a side note... I tried one other thing that makes me think SOMETHING is wrong here:
If I choose as OLE DB Connection instead... and click the 'Build...' button and then enter the values in the Data Link Properties Window (OLE DB Provider for SQL Server, and then the connection info on the Connection tab) and then click Test Connection on the Data Link Properties window, it says my test succeeded. Then I click 'ok' which takes me back to the OLE DB Connection windows with the connection string pre-filled, and click test on THAT window and I get the same HTTP Error Code 400 Bad Request error...
Hopefully that is enough detail that someone can can tell me what I have broken?
Thanks,
MikeYou will get a better response if you ask this question on the DW Application Dev forum. This forum mainly covers client-side issues.
-
hello
Take me if you have the power to fa is that I have a good time trying to install the demo of sap, but I fail to do so últimamemente follows all the steps but in the end I get the following error java:
productException: (error code = 200; message="Java error"; exception = java.lang.Exception)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
at java.lang.Thread.run(Unknown Source)
may be that the Java Virtual Machine? what virtual machine
it is recomd
i don´t know how to correct them
thank you very much
byeHello,
This looks like a known issue error code: 200
check this document:
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37
Also, please make sure the service SAPNSP_00 @ OS level is running. If not, start the service manually and proceed with the installation.
Hope it helps,
Regards,
Satish.
Edited by: Satish Arram on Oct 10, 2008 6:30 PM -
Hi,
I have converted my previous version package which was build upon 4.6, using sequencer to 5.0 app-v client.
I didn't have any errors & warnings. But, when I tried to install the package , I'm getting the error with error code
Error Code:
0C80070003 ( App v Error Code)
74F00F0C80070003 ( Internal error Code )
Bala.RHi there,
It was my mistake and the way we published app connection groups in the past. In the past we published the applications directly through an connection group without publishing the applications themself. In app-v 5.0 sp3 I needed to publish the packages itself
also.... -
When I try to transfer a video from iPhone to Mac it gives me this error code (com.apple.ImageCaptureCore error 28.) It only happens when I try to transfer a 1.9GB video
How are you trying to transfer it? Which applicaiton on the Mac are you using? How are you connecting the iPhone to the Mac? If you're using iPhoto what version of iPhoto is it and what system are you using?
OT -
Error Code "Lightroom.exe Application Error"
Lightroom 4 crashes when opening. Error Code "Lightroom.exe Application Error"
Running Windows 7 64
Is there an easy fix.[discussion moved to Adobe Reader forum]
-
Launch error code: -2857 Exited with error code: 215
Anybody have any idea what:
"Launch error code: -2857 Exited with error code: 215"
means when launching an app? Tries to launch, then quit. That shows up in the Console.
Thanks.First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini
Maybe you are looking for
-
How do I use ipod 5th classic with new itunes
how do I use my old ipod classic 5th generation with the latest itunes software?
-
Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion
Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks
-
Hi I have build an Labview project with FPGA target . I have configured an FPGA VI and an host Vi to acquire data and logged the data to a file and stored the latest data in a global variable simultanously. I have configured one more VI in the same
-
I just made two separate copies on external hardrives of all my Lightroom 4 and 5 work. I also cleared everything in my recycle bin to make room on the hard drive. Now, when I go to work in Lightroom 5, I have no pictures. I did check the back-ups, a
-
Still trying to go through the firewal with a java client.
One of guys here suggested me to fix the available ports on the server computer and open that range of ports on the firewall so that the ejb client can talk to the server even the client outside of the LAN. However, my customer rejects the suggestion