Error: connecting to db with SQL Developer

Hi,
I have just done a test disaster recovery (complete restore and recovery) of my database. I have successfully restored and recovered my database and managed to open the database , though with a few warnings shown below
RMAN> alter database open resetlogs;
database opened
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT row
s
ORACLE error from target database:
ORA-06553: PLS-801: internal error [56319]
When I try to use sql developer to access the database. I end up getting the following error:
ORA-06544: PL/SQL:internal error, arguments: [56319], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [56319]
06544. 00000 - "PL/SQL: internal error, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"
*Cause: A pl/SQL internal error occurred.
*Action: Report as a bug; the first argument is the internal error number.
vendor code 6544
This has been the first time I performed full recovery.
I am using sqldeveloper 1.1 and running oracle 10g R2
I was wondering if anybody has come across this problem before
Any help would be appreciated

Sorry, I meant that "restore database" and "recover database" commands both completed successfully without errors 
I had a try connecting with sql *plus, which I get 
ORA-06553:PLS-801 internal error. 
HOWEVER, I still get connected, and can run queries against the tables 
You'd get better response from the Recovery Manager forum... Sorry you are right,

Similar Messages

"peer not authenticated" - Connecting to ORDS with SQL Developer

Background
Configuring ORDS (2.0.7) to my database, with APEX_LISTENER and APEX_REST_PUBLIC_USER created via APEX 4.2.2 script.
Listener is running as expected - and APEX works as expected.
ORDS credential setup (as made evident by the credentials file with the user name inside)
Addition of the line to the ords/default.xml: <entry key="security.verifySSL">false</entry>
To allow connection without using SSL.
Current Status
I am able to connect using SQL Developer "Restful Data Services" feature using the "HTTP" connection and the credentials that have been setup successfully.
Problem
Attempting to configure a SQL Developer (4.0.2.15) connection using the same account, but HTTPS with 443 - the connection results in the error message:
Authentication Failure
Cannot connect to S42
peer not authenticated
Additional
I am using an installation of Tomcat and a version of Glassfish to test this feature. I have received the same error on both test cases.
I have also tested by removing the <entry key="security.verifySSL">false</entry>
Is there a specific type of HTTPS certificate that is required to connect using HTTPS?
Did I miss a different setting?
Regards,
Tim St.

Got this working, needed a change to the config file on weblogic server by our DBA.

Error connecting oracle 11g through SQL Developer

i am using SQL Developer to connect to oracle 11g which is installed to another machine in same network
means i am using a client machine to get connected to oracle installed to host machine through SQL Developer
iam getting this error
network adapter could not establish the connection
vendor code 170002
my listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-zoheb.PCSTECH.COM)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-ansari.pcstech.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
iam not understanding what is problem
please somebody help

I would say it's vendor code 17002 (not 170002). And such a message is thrown by SQL Developer , unfortunately very generic for any kind of connection problems.
Start sqlplus and try to connect, very likely you get a better error message.
Recently I had such a connection problem and the reason was - No Listener.
Werner

I have problem to connect oracle DB with SQL developer

I try connect to my oracle db with oracle SQL developer and received that message:
http://ioj.com/v/camkp
(pictures 1 and 2)
if i try connect with sql plus, all well.
command : select userenv('LANGUAGE') from dual; result: Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select userenv('LANGUAGE') from dual;
*USERENV('LANGUAGE')
RUSSIAN_RUSSIA.CL8MSWIN1251*
in SQL DEVELOPER: (picture 3)
check\uncheck "Skip NLS Settings", nothing changed.
what the issue is?

Then apparently it's still not getting the OS settings right; try to add these to \sqldeveloper\bin\sqldeveloper.conf (maybe region is enough):
AddVMOption -Duser.language=en
AddVMOption -Duser.country=US
AddVMOption -Duser.region=USHope that helps,
K.

Jdbc-OCI:112020 Error with SQL Developer 4.0.0.12

Hi,
I receive an error, Incompatible version of libocijdbc[Jdbc:112030, Jdbc-OCI:112020, when attempting to log into an existing connection with SQL Developer 4.0.0.12. I do have the JDK 7u45 for 32 bit Windows 7. I know this was an issue in the past and attempted to look at earlier solutions with no luck. Any idea?

The issue is that if you are using the OCI (thick) JDBC driver the version of the JDBC library (in SQLDeveloper) must match the version in your ORACLE_HOME.
It seems SQLDeveloper 4 ships with 11.2.0.3 version of JDBC and you have 11.2.0.2 client installed.
Possible options:
1 Don't use the OCI driver. You can untick the box in Tools |Preferences|Database |Advanced, but some connection types use it anyway.
2 Upgrade your Oracle client.

Issue with SQL Developer connect to SQL server

I'm using "SQL Developer 2.1.1.64.45" to work on a migration project which needs to convert a SQL server database to a Oracle 11g database. But I got an issue when I setup the SQL server connection. The SQL Developer let me connect by selecting a SQL server database name (For example: Northwind), but once connected, it always connected to "master" database instead. The "SQL Developer" is running on Windows 7 Professional (x64) platform. My Oracle database is 11g, and SQL server database is SQL 2005. And my SQL server instance name is "SQL2005". Anyone have ever experienced this problem? Thanks in advance.
Edited by: user8276338 on Feb 8, 2011 1:05 PM

Hi Bob,
Thanks for the feedback, lets stick with SQL Developer 3.
Correct me if I'm wrong,
You attempted to migrate from SQL Server to Oracle including target generation and datamove in one go, by filling in each step of the migration wizard to the end.
During the datamove you got
ORA-01000:maximum open cursor exceeded
So it looks like SQL Developer during the migration is not closing cursors fast enough and hits the maximum number of open cursors in your Oracle database.
I think the default max open cursors is 300 in Oracle.
There are a few things we can do here.
You should be able to see the new migration project in your Migration Projects navigator.
By navigating down the project tree to "Converted Database Objects" we can attempt the data move again by right clicking and choosing "Data Move".
But first I would restart SQL Developer so as to free up any lingering open cursors.
That may allow you to complete the data move, as the only cursors being open are being used in the data move and not some cursors which may have been left open from previous steps in the migration.
Now from my perspective I would like to identify where are we leaving open the cursors, so I'm going to setup some testcases my end to see if I can replicate.
From your perspective Id presume you just want to move on with the migration.
So if the above (shutdown and attempt just the data move) doesnt workyou could
A) Increase the MAX OPEN CURSORs on your Oracle databases so it complete the data move
or
B) Use the offline data move technique.
A) Increase MAX OPEN CURSORs
This wiki explains how to do that, looks like 1000 is fairly common, but even a much larger number is not a problem
http://wiki.oracle.com/page/OPEN_CURSORS
ALTER SYSTEM SET OPEN_CURSORS = 10000;
OR
B) Offline Data Move
If you are moving large amounts of data (say > 1GB), then the standard data move (we call it online), which just uses JDBC to SELECT * FROM and INSERT INTO may not cut the mustard.
In this case you can try using our offline technique. SQL Developer will generate a set of scripts for you.
unload_script.bat will use SQL Servers BCP tool to dump out the table data into DAT files.
oracle_ctl.bat will load the data in the DAT files into Oracle.
As we know the names of all the tables, columns ,both SQL Server and Oracle, we can generate fairly good scripts.
The benefit of this technique is large amounts of data can be migrated and you get to use tools designed to dump data and load in data, so you have better error logging and tweaking.
To attempt this in the Migration Wizard , Data Move page, select offline.
If you can describe your database a bit (number of tables, number of procedures, amount of data to migrate) I may be able to define my testcase better so I can replicate the issue.
Thanks
Dermot
SQL Developer Team.

Error while expanding tables in SQL Developer

Hi All,
I am using Oracle 11g, SQL Developer Version 3.1.07,
I have saved a connection for testing, for the default account (scott/tiger).
Connection Test is successful, but when I tried to expand the tables folder, it is showing an error.
Error:
java.lang.NoSuchMethodError: oracle.jdbc.OraclePreparedStatement.setStringAtName(Ljava/lang/String;Ljava/lang/String;)V
     at oracle.dbtools.db.DBUtil$15.call(DBUtil.java:959)
     at oracle.dbtools.db.DBUtil$15.call(DBUtil.java:945)
     at oracle.dbtools.db.DBUtil.assertLock(DBUtil.java:1723)
     at oracle.dbtools.db.DBUtil.bind(DBUtil.java:945)
     at oracle.dbtools.db.DBUtil.bind(DBUtil.java:1404)
     at oracle.dbtools.raptor.controls.grid.OracleRSTModel.prepareStatement(OracleRSTModel.java:89)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel.openResultSet(ResultSetTableModel.java:458)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel.fetchNext(ResultSetTableModel.java:183)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel$4.doWork(ResultSetTableModel.java:636)
     at oracle.dbtools.raptor.controls.grid.ResultSetTableModel$4.doWork(ResultSetTableModel.java:620)
     at oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Note:
1. I have tried the query "SELECT * FORM TAB", it fetch all the tables name from the database.
2. I have the following privilege
PRIVILEGE
CREATE SESSION
UNLIMITED TABLESPACE
CREATE TABLE
CREATE CLUSTER
CREATE SEQUENCE
CREATE PROCEDURE
CREATE TRIGGER
CREATE TYPE
CREATE OPERATOR
CREATE INDEXTYPE
Please suggest me some idea how to solve this issue.

Hi Kamal,
Some of the comments in this earlier post may be of help:
Can't view database objects
Bottom line: the missing method is found in jdbc jars like ojdbc5.jar and ojdbc6.jar, but not in earlier versions. Not sure of exact names, but probably something that came with an Oracle 8i client (maybe ojdbc14.jar?) or even a (much older) jar like classes12.jar would not have that method.
If you would rather not clean up this probable ORACLE_HOME conflict, you can try a common workaround noted again today in the forum to force use of the ojdbc6.jar that ships with SQL Developer:
Re: Migrate from sql developer 1.5x to 3.x
Regards,
Gary
SQL Developer Team

DB2 8.1 to Oracle 11g with SQL Developer 3.0

Hi,
I started migrating my DB2 8.1 to Oracle 11g, with SQL Developer 3.0
Basically, I need to migrate TABLES.
I followed these steps:
1) I created a new Oracle database, tablespaces, users, etc.
2) Then, I created both (DB2 and Oracle) connections into SQL Developer 3.0. All works fine.
3) I start capturing one table with the "Copy to Oracle" feature. Done with no errors.
But when I compare the table structure, I see the following problems in Oracle:
a) All fields are NULLABLE = YES. SQL Developer show this field property correctly in DB2: NULLABLE = NO, but not migrated the same!
SOLUTION: All I want is that SQL Developer simply migrating the same value who I have in the DB2. But how?
b) In DB2 I have one field property called COLUM DEFAULT. In Oracle this property is called DATA_DEFAULT. The SQL Developer show this field property correctly for the DB2 tables (for example: 0.0, ' ', etc), but don't migrated the same value! All fields are configured to DATA_DEFAULT = NULL.
SOLUTION: I think this occurs because NULLABLE is migrated with the value YES. Well, all I need is the same above...
NOTE: I tested the SWISSQL DATA MIGRATION software, and it works fine. All tables, field properties and data are migrated sucessfull. But this program is trial version!
Well, I think all of this are BUGS into SQL Developer.
Please, anyone to help me?
Regards,
Ylram

Welcome to the forum!
>
I just did right click in the procedure body and found [Debug, Compile for Debug, Compile, Run].
>
You listed a bunch of things but you didn't say what steps you actually performed and what the result was.
Did you 'Compile'the procedure? until you compile the procedure you can't debug it.
I just created a new procedure and when I select the body it displays in the 'Code' window on the right. But the 'Debug' icon is not enabled because the procedure was not compiled for debug.
When I compile it for debug the 'Debug' icon is now enabled.

Error while executing query in SQL Developer

I am getting the following error whenever I login to sql developer.
SEVERE 56 0 oracle.jdbc Error while registering Oracle JDBC Diagnosability MBean.
I get below error whenever I execute any query.
SEVERE 70 53918 oracle.dbtools.worksheet.sqlhistory.SqlHistoryTask oracle.dbtools.worksheet.sqlhistory.db.HistoryDB.readHistory(HistoryDB.java:99)
I use following versions
Java(TM) Platform 1.6.0_35
Oracle IDE 3.2.20.09.87
Versioning Support 3.2.20.09.87
I am working on Oracle11gR2.
Please help me to resolve this and let me know if you need more information.

Got same issue with :
Component
Version
=========
=======
Java(TM) Platform
1.6.0_41
Oracle IDE
3.2.20.09.87
Versioning Support
3.2.20.09.87
Alternate path for SqlHistory directory :
C:\Users\USER_NAME\AppData\Roaming\SQL Developer
Best Regards,
F.L.

Statement terminator problems when exporting data with SQL Developer 3.2

I've ran across what appears to be a bug with SQL Developer 3.2.20.09. If someone can let me know if this is indeed a bug, or just something I need to configure differently, please let me know.
The problem is related to exporting a database as a SQL script, and terminator characters at the end of "create" statements, especially when columns have comments, and problems that occur when using SQLPlus to run the export script to create the tables. With the old SQL Developer 1.5.4, with the "Terminator" and "Pretty Print" options checked, statements like the following are generated:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.';
When I then run the script using SQLPlus, everything works fine. However, with SQL Developer 3.2.20.09, with the same options enabled, the same statements are generated like this:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.';
Notice all of the extra slashes in there. If a slash is not used as a statement terminator, SQLPlus treats slashes as a command to repeat the last SQL statement, which causes many errors about tables or sequences already existing. So, I tried removing the "Terminator" flag from the export options. This lead to statements that looked a bit more promising:
-- DDL for Type NUM_ARRAY
CREATE OR REPLACE TYPE "NUM_ARRAY"
IS TABLE OF NUMBER(20)
-- DDL for Sequence MYTABLE_SEQ
CREATE SEQUENCE "MYTABLE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE
-- DDL for Table MYTABLE
CREATE TABLE "MYTABLE"
(     "MYTABLE_ID" NUMBER,
     "COL2" NUMBER,
     "COL3" NUMBER
-- DDL for Table ANOTHERTABLE
CREATE TABLE "ANOTHERTABLE"
(     "ANOTHERTABLE_ID" NUMBER,
     "COL2" VARCHAR2(1024),
     "COL3" VARCHAR2(1024)
COMMENT ON COLUMN "ANOTHERTABLE"."ANOTHERTABLE_ID" IS 'This is a comment.'
The big problem, though, is in the statement for the table with a comment. Notice that there are two statements, but there is not a semicolon after either of them. This unfortunately causes the "COMMENT" statement to be appended to the "CREATE TABLE" statement before being executed, which causes the table to not be created (which causes even more errors later on when the script attempts to populate the table with data).
So, it would appear that this is a bug, but I'm not sure. Is there a way I can configure the export options to make SQL Developer export these statements like it used to in older versions?
Thanks,
-Bill

>
So, it would appear that this is a bug, but I'm not sure.
>
That would be a bug. Thanks for reporting it and providing the detailed example.
>
Is there a way I can configure the export options to make SQL Developer export these statements like it used to in older versions?
>
No.
Leave the thread open. One of the developers for sql developer should be monitoring the forum and can provide more information.

Cannot connect to database using SQL Developer

Ok. Here are the facts:
1) I can connect to the database using PL/SQL Developer.
2) I wanted to try SQL Developer and I am unable to connect to the same database with SQL Developer. I provide username and password and select "network alias" and click test and I get "Network adaptor could not be established"
3) TNS names.ora file resides on a mapped drive which clearly is accessible by PL/SQL developer but not by SQL developer.
What am i missing?
Thanks a lot

If you can select a network alias, then sqldeveloper has found your tnsnames and the problem lies elsewhere.
Is the network drive specified by a UNC? SQLDeveloper doesn't work well with unc names.

Querying OBIEE catalog with SQL Developer

Hi all,
is it possible to query the Oracle BI server catalog with SQL developer via ODBC or JDBC.
I have done it with Cognos but I don't see how it can be made.
suppose that ii have DSN Oracle BI server,
I tried to put the connection parameters like this in sql developer
Hostname : localhost
Port : 9703
SID : AnalyticsWeb ( I tried also ORACLE BI SERVER)
but it doen't work
Thanks
Edited by: Houssem EL AYDI on 16 avr. 2010 05:04

Hi,
In fact,my ODBC connection is on oracle BI server connection (Analytics) which contains the catalog.
With SQL Developer, I think we should go througt an JDBC connection and not ODBC. I tried to add the JDBC driver of oracle BI server to SQL Developer but it doesn't work.
But in general any ODBC-capable client should be able to query the BI Server directlyWell, I did another test with Cognos, the ODBC connection works with Orale BI.
But with an another ODBC, i just can to import the presentation catalog but the SQL query doesn't work.
Edited by: Houssem EL AYDI on 19 avr. 2010 04:40

Help for migrating DB2 to Oracle11 g, with Sql Developer

Hello, Good Afternoon,
Today I started a series of exercises to migrate DB2 9 to Oracle 11 g, with SQL Developer in order to evaluate this tool for a project we have in door.
But it is setting a number of issues, because the DB2 tables that we are trying to migrate do not have primary key and load the data sets the error ORA-02270.
It is generating an error when trying to convert the following triggers.
CREATE TRIGGER min_salary NO CASCADE
BEFORE INSERT ON staff REFERENCING NEW AS newstaff
FOR EACH ROW MODE DB2SQL BEGIN ATOMIC
SET newstaff.salary =
CASE
WHEN newstaff.job = 'Mgr' AND newstaff.salary < 17000.00 THEN 17000.00
WHEN newstaff.job = 'Sales' AND newstaff.salary < 14000.00 THEN 14000.00
WHEN newstaff.job = 'Clerk' AND newstaff.salary < 10000.00 THEN 10000.00
ELSE newstaff.salary END;
END
CREATE TRIGGER do_not_del_sales NO CASCADE
BEFORE DELETE ON staff REFERENCING OLD AS oldstaff
FOR EACH ROW MODE DB2SQL
WHEN(oldstaff.job = 'Sales') BEGIN ATOMIC SIGNAL SQLSTATE '75000'
('Sales staff cannot be deleted... see the DO_NOT_DEL_SALES trigger.'); END
SEVERE 197 625 oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle Failed to Convert Trigger MIN_SALARY>: class org.antlr.runtime.NoViableAltException -> null: Line 1 Column 0
SEVERE 196 1328 oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle Failed to Convert Trigger DO_NOT_DEL_SALES>: class org.antlr.runtime.NoViableAltException -> null: Line 1 Column 0
I can do for Work Bench (SQL Developer) not validate that DB2 must carry primary keys?
I can do for Work Bench (SQL Developer), I can turn triggers the 2 above?
Greetings

to follow up the root cause of ORA-02270 it would be good to get the DB2 table definition as the table is defined in the Oracle database.
For the other issue with the trigger, please have a look at:
http://www.oracle.com/technetwork/database/migration/db2-084087.html
=> it lists which objects the migration supports as:
Supported Migration Objects
 Tables
 Views
 Indexes
 Users
 Constraints
=> so no triggers.

View jobs with SQL Developer and export to file with delimiter

Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.

Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file.

ORA-01041 Error while query in PL/SQl Developer

Hi All,
I am trying to execute a simple select statement in PL/SQL developer. After the query gets executed i am getting a error
ORA-01041 internal error. hostdef extension doesn`t exist.
But when i perform the same query in sqlplus, i do not receive this kinda error.
Does any 1 have a idea on this error?
Regards,
Ritesh Khuller

PL/SQL Developer is a third-party tool and not from oracle.
maybe you have better chances in the rdbms-forum where they know more about hostdef's
PL/SQL
General Database Discussions

Error: connecting to db with SQL Developer

Similar Messages

Maybe you are looking for