Error . Copying Module Program
Hello Friends ,
I am trying to copy a module program SAPMZZTES1 with screens 1000 , 1100 , 1200 , 1300 , 1400 to another module pool program SAPMZZTES2 which would be a replica of the ealier module pool program .
When I go to SE51 and do copy SAPMZZTES1 1000 to SAPMZZTES2 1000 . It gives me the following error .
Program SAPMZZTES2 does not exist .
Please advise .
Thanks & Regards,
HI,
1. Go to SE38
2. give the program name as SAPMZZTES1.
3. Click on copy button (Ctrl + F5) or Programs --> Copy menuitem.
4. Provide new name as SAPMZZTES2
5. click copy and select all check boxes..
it copies the program into SAPMZZTES2.
<b>HARI: what is the difference between my solution and Sajan Solution?</b>
Regards
SAB
Similar Messages
-
Error in module program - Invalid field format( screen error )
In the module program i have added 1 input field named gv_pallet of 1 character. while processing the transaction when i put value 1 in this input field and press a button i am getting error ' Invalid field format( screen error ) .
I am not geting any clue whats the eror . can anyone able to tell me the error.
Point will be guranted .
RegardsNo need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D -
Error while copying Z program to another enviroment
Hi, experts
I have a Z program into one client's enviroment, which works fine. I tried copying this program into another client's enviroment, and i get the following error message, while syntax check:
"RC_IN1 must be a byte-type field. (Typ X or XSTRING)."
And this error is on the following form:
form xor using rc_in1 type c rc_in2 type c rc_out type c.
data:
li_abit type i,
li_bbit type i.
rc_out = space.
if rc_in1 <> space.
do 8 times.
get bit sy-index of rc_in1 into li_abit.
get bit sy-index of rc_in2 into li_bbit.
if li_abit <> li_bbit.
set bit sy-index of rc_out to 1.
else.
set bit sy-index of rc_out to 0.
endif.
enddo.
if rc_out = space.
rc_out = rc_in1.
endif.
endif.
endform.
When I check into one client's enviroment, it does not gives error. Only in THAT client.
Why is this happening?
Thanks in advance,
Brian GonsalesHi,
are the both client environments hav same version (ECC 6).
In ECC 6 version type X is not allowed.
To avoid this problem,
you need to declare the field of TYPE C.
you need to get the value from Cl_ABAP_CHAR_UTILITIES.
Regards
Sandeep Reddy -
I'm trying to install itunes version 7. I keep getting this message.
error 1905.module c:\program\files\quicktime\QTOcontrol.dll failed to unregister HRESULT -2147220472. Contact your support personnel.
Anyone know how to fix this?I got this very same error - I clicked okay twice, which didn't do anything, and then the x button.
The program went on and ended up installing! It seems okay at this point.
Wierd huh? -
Error 1905.module c:\program\files\quicktime\QTOcontrol.dll
I'm trying to install itunes version 7. I keep getting this message.
error 1905.module c:\program\files\quicktime\QTOcontrol.dll failed to unregister HRESULT -2147220472. Contact your support personnel.
Anyone know how to fix this?
Windows XP delli get the same thing
-
Error in copied include program
Hi friends,
i copied z program into y program the z program contains includes also i copied all.but in the copied program ( y program) in the includes the following error is coming
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
How to avoid the above error.
thanks for all.well in every report there has to be following line:
Report Y?????.
AND this has to be the first statement to come.
sometimes that line is not in the main report but in the first include (normally top-include).
as long as this is still the first statement all is fine.
But if you perhaps have now the include for your selection screen above the include which contains the critical line, it wont work since you have other statements (Parameters or Select-options) BEFORE that critical line.
easiest way is to leave it in the main frame programm right on top, above all the includes. -
Is it possible to copy one Programs Screen to Function module ??
As you know it's common to copy one programs screen to another but my requirement is coping one screen in a program to function module
i didn't find any option for it , is there a solution for it ?Hi Mohammad,
You can't create or copy a screen to function module....
But you can do this in a function group, so that it available for all function modules...
Note : While copying to function group , Target program name = SAPLZFUNCTION_GROUP
Regards
Sreekanth -
Dear Pals,
I need some tips from you pals.
My question is we have a development sytem there one transactions is running, I just wanted to copy the program, screens etc for that transaction to disk and move to some other company as it is for support. I had tried but i could not copy the screen painter forms etc.. How can i do it as it is very important.
Your help will be appreciated.
Regards
Omer.Hi Mohamed,
Here is a program given by someone last week in the forum.
PROGRAM zdown.
*=======================================================================
*=================================
Direct Download Enterprise version 1.2.
THIS SOFTWARE IS FOR PERSONAL USE ONLY.
THIS PROGRAM IS FREEWARE AND IS PROVIDED ON AN AS-IS BASIS WITHOUT
*WARRANTY OF ANY KIND.
THE PROVIDER SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, EXPRESS OR
*IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL PROVIDER BE LIABLE FOR ANY CONSEQUENTIAL,
PROGRAM DESCRIPTION & USE
Allows a user to download programs, Functions, DD definitions, etc
*to the presentation server. This
version searches recursively for nested includes and function
*modules, and allows you to download
the resulting code as standard text or HTML web pages within a
*suitable directory structure.
You can either search by object name, using wildcards if you wish,
*or a combination of Author and
object name. If you want all objects returned for a particular
*author then select the author name
and choose the most suitable radiobutton. All objects will be
*returned if the fields to the right
hand side of the radiobutton are left completely blank.
Compatible with R/3 Enterprise only, for older versions of SAP you
*will need Direct Download version 5.xx.
This version removes the programming limitations imposed by
*developing across SAP releases 3 to 4.6.
This program is intended to allow a person to keep a visual
*representation of a program for backup
purposes only as has not been designed to allow programs to be
*uploaded to SAP systems.
AUTHOR : E.G.Mellodew
PROGRAM CONTACT : [email protected]
www.dalestech.com
Types
text element structure
TYPES: ttexttable LIKE textpool.
GUI titles
TYPES: tguititle LIKE d347t.
Message classes
TYPES: BEGIN OF tmessage,
arbgb LIKE t100-arbgb,
stext LIKE t100a-stext,
msgnr LIKE t100-msgnr,
text LIKE t100-text,
END OF tmessage.
Screen flow.
TYPES: BEGIN OF tscreenflow,
screen LIKE d020s-dnum,
code LIKE d022s-line,
END OF tscreenflow.
Holds a table\structure definition
TYPES: BEGIN OF tdicttablestructure,
fieldname LIKE dd03l-fieldname,
position LIKE dd03l-position,
keyflag LIKE dd03l-keyflag,
rollname LIKE dd03l-rollname,
domname LIKE dd03l-domname,
datatype LIKE dd03l-datatype,
leng LIKE dd03l-leng,
ddtext LIKE dd04t-ddtext,
END OF tdicttablestructure.
Holds a tables attributes + its definition
TYPES: BEGIN OF tdicttable,
tablename LIKE dd03l-tabname,
tabletitle LIKE dd02t-ddtext,
istructure TYPE tdicttablestructure OCCURS 0,
END OF tdicttable.
Include program names
TYPES: BEGIN OF tinclude,
includename LIKE trdir-name,
includetitle LIKE tftit-stext,
END OF tinclude.
Method
TYPES: BEGIN OF tmethod,
cmpname LIKE vseomethod-cmpname,
descript LIKE vseomethod-descript,
exposure LIKE vseomethod-exposure,
methodkey TYPE string,
END OF tmethod.
Class
TYPES: BEGIN OF tclass,
scanned(1),
clsname LIKE vseoclass-clsname,
descript LIKE vseoclass-descript,
msg_id LIKE vseoclass-msg_id,
exposure LIKE vseoclass-exposure,
state LIKE vseoclass-state,
clsfinal LIKE vseoclass-clsfinal,
r3release LIKE vseoclass-r3release,
imethods TYPE tmethod OCCURS 0,
idictstruct TYPE tdicttable OCCURS 0,
itextelements TYPE ttexttable OCCURS 0,
imessages TYPE tmessage OCCURS 0,
textelementkey TYPE string,
publicclasskey TYPE string,
privateclasskey TYPE string,
protectedclasskey TYPE string,
typesclasskey TYPE string,
exceptionclass TYPE i,
END OF tclass.
function modules
TYPES: BEGIN OF tfunction,
functionname LIKE tfdir-funcname,
functiongroup LIKE enlfdir-area,
includenumber LIKE tfdir-include,
functionmaininclude LIKE tfdir-funcname,
functiontitle LIKE tftit-stext,
topincludename LIKE tfdir-funcname,
progname LIKE tfdir-pname,
programlinkname LIKE tfdir-pname,
messageclass LIKE t100-arbgb,
itextelements TYPE ttexttable OCCURS 0,
iselectiontexts TYPE ttexttable OCCURS 0,
imessages TYPE tmessage OCCURS 0,
iincludes TYPE tinclude OCCURS 0,
idictstruct TYPE tdicttable OCCURS 0,
iguititle TYPE tguititle OCCURS 0,
iscreenflow TYPE tscreenflow OCCURS 0,
END OF tfunction.
TYPES: BEGIN OF tprogram,
progname LIKE trdir-name,
programtitle LIKE tftit-stext,
subc LIKE trdir-subc,
messageclass LIKE t100-arbgb,
imessages TYPE tmessage OCCURS 0,
itextelements TYPE ttexttable OCCURS 0,
iselectiontexts TYPE ttexttable OCCURS 0,
iguititle TYPE tguititle OCCURS 0,
iscreenflow TYPE tscreenflow OCCURS 0,
iincludes TYPE tinclude OCCURS 0,
idictstruct TYPE tdicttable OCCURS 0,
END OF tprogram.
Internal tables
Dictionary object
DATA: idictionary TYPE STANDARD TABLE OF tdicttable WITH HEADER LINE.
Function modules.
DATA: ifunctions TYPE STANDARD TABLE OF tfunction WITH HEADER LINE.
Tree display structure.
DATA: itreedisplay TYPE STANDARD TABLE OF snodetext WITH HEADER LINE.
Message class data
DATA: imessages TYPE STANDARD TABLE OF tmessage WITH HEADER LINE.
Holds a single message class an all of its messages
DATA: isinglemessageclass TYPE STANDARD TABLE OF tmessage WITH HEADER
LINE.
Holds program related data
DATA: iprograms TYPE STANDARD TABLE OF tprogram WITH HEADER LINE.
Classes
DATA: iclasses TYPE STANDARD TABLE OF tclass WITH HEADER LINE.
Table prototypes
DATA: dumidictstructure TYPE STANDARD TABLE OF tdicttablestructure.
DATA: dumitexttab TYPE STANDARD TABLE OF ttexttable.
DATA: dumiincludes TYPE STANDARD TABLE OF tinclude.
DATA: dumihtml TYPE STANDARD TABLE OF string.
DATA: dumiheader TYPE STANDARD TABLE OF string .
DATA: dumiscreen TYPE STANDARD TABLE OF tscreenflow .
DATA: dumiguititle TYPE STANDARD TABLE OF tguititle.
DATA: dumimethods TYPE STANDARD TABLE OF tmethod.
Global objects
DATA: objfile TYPE REF TO cl_gui_frontend_services.
DATA: objruntimeerror TYPE REF TO cx_root.
Constants
CONSTANTS: versionno TYPE string VALUE '1.2'.
CONSTANTS: tables TYPE string VALUE 'TABLES'.
CONSTANTS: like TYPE string VALUE 'LIKE'.
CONSTANTS: type TYPE string VALUE 'TYPE'.
CONSTANTS: typerefto TYPE string VALUE 'TYPE REF TO'.
CONSTANTS: structure TYPE string VALUE 'STRUCTURE'.
CONSTANTS: lowstructure TYPE string VALUE 'structure'.
CONSTANTS: occurs TYPE string VALUE 'OCCURS'.
CONSTANTS: function TYPE string VALUE 'FUNCTION'.
CONSTANTS: callfunction TYPE string VALUE ' CALL FUNCTION'.
CONSTANTS: message TYPE string VALUE 'MESSAGE'.
CONSTANTS: include TYPE string VALUE 'INCLUDE'.
CONSTANTS: lowinclude TYPE string VALUE 'include'.
CONSTANTS: destination TYPE string VALUE 'DESTINATION'.
CONSTANTS: is_table TYPE string VALUE 'T'.
CONSTANTS: is_program TYPE string VALUE 'P'.
CONSTANTS: is_screen TYPE string VALUE 'S'.
CONSTANTS: is_guititle TYPE string VALUE 'G'.
CONSTANTS: is_documentation TYPE string VALUE 'D'.
CONSTANTS: is_messageclass TYPE string VALUE 'MC'.
CONSTANTS: is_function TYPE string VALUE 'F'.
CONSTANTS: is_class TYPE string VALUE 'C'.
CONSTANTS: is_method TYPE string VALUE 'M'.
CONSTANTS: asterix TYPE string VALUE '*'.
CONSTANTS: comma TYPE string VALUE ','.
CONSTANTS: period TYPE string VALUE '.'.
CONSTANTS: dash TYPE string VALUE '-'.
CONSTANTS: true TYPE i VALUE 1.
CONSTANTS: false TYPE i VALUE 0.
CONSTANTS: lt TYPE string VALUE '<'.
CONSTANTS: gt TYPE string VALUE '>'.
CONSTANTS: unix TYPE string VALUE 'UNIX'.
CONSTANTS: non_unix TYPE string VALUE 'not UNIX'.
CONSTANTS: background_colour TYPE string VALUE '#FFFFE0'.
CONSTANTS: colour_white TYPE string VALUE '#FFFFFF'.
CONSTANTS: colour_black TYPE string VALUE '#000000'.
CONSTANTS: colour_yellow TYPE string VALUE '#FFFF00'.
CONSTANTS: comment_colour TYPE string VALUE '#0000FF'.
CONSTANTS: htmlextension TYPE string VALUE 'html'.
CONSTANTS: textextension TYPE string VALUE 'txt'.
Global variables
DATA: statusbarmessage(100).
DATA: forcedexit TYPE i VALUE 0.
DATA: starttime LIKE sy-uzeit.
DATA: runtime LIKE sy-uzeit.
DATA: downloadfileextension TYPE string.
DATA: downloadfolder TYPE string.
DATA: slashseparator TYPE string.
DATA: frontendopsystem TYPE string.
DATA: customernamespace TYPE string.
RANGES: soprogramname FOR trdir-name.
RANGES: soauthor FOR usr02-bname.
RANGES: sotable FOR dd02l-tabname.
RANGES: sofunctionname FOR tfdir-funcname.
RANGES: soclassname FOR vseoclass-clsname.
RANGES: sofunctiongroup FOR enlfdir-area.
FIELD-SYMBOLS: <wadictstruct> TYPE tdicttable.
Selection screen declaration
Author
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE tblock1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(23) tauth.
PARAMETERS: pauth LIKE usr02-bname MEMORY ID mauth.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(36) tpmod.
PARAMETERS: pmod AS CHECKBOX.
SELECTION-SCREEN END OF LINE.
*--- Local objects
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(36) t$tmp.
PARAMETERS: p$tmp AS CHECKBOX DEFAULT ''.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE tblock2.
Tables
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: rtable RADIOBUTTON GROUP r1.
SELECTION-SCREEN COMMENT 5(20) trtable.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) tptable.
PARAMETERS: ptable LIKE dd02l-tabname MEMORY ID mtable.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(79) ttnote.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(79) ttnote1.
SELECTION-SCREEN END OF LINE.
Message classes
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: rmess RADIOBUTTON GROUP r1.
SELECTION-SCREEN COMMENT 5(18) tpmes.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) tmname.
PARAMETERS: pmname LIKE t100-arbgb MEMORY ID mmname.
SELECTION-SCREEN END OF LINE.
Function modules
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: rfunc RADIOBUTTON GROUP r1.
SELECTION-SCREEN COMMENT 5(30) trfunc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) tpfname.
PARAMETERS: pfname LIKE tfdir-funcname MEMORY ID mfname.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) tfgroup.
PARAMETERS: pfgroup LIKE enlfdir-area MEMORY ID mfgroup.
SELECTION-SCREEN END OF LINE.
Classes
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: rclass RADIOBUTTON GROUP r1.
SELECTION-SCREEN COMMENT 5(30) trclass.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) tpcname.
PARAMETERS: pclname LIKE seoclass-clsname MEMORY ID mcname.
SELECTION-SCREEN END OF LINE.
Programs / includes
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: rprog RADIOBUTTON GROUP r1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(18) tprog.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(18) trpname.
PARAMETERS: pprog LIKE trdir-name MEMORY ID mprog.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
Language
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(18) tmlang.
PARAMETERS: pmlang LIKE t100-sprsl DEFAULT 'EN'.
SELECTION-SCREEN END OF LINE.
Package
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(18) tpack.
PARAMETERS: ppack LIKE tadiv-devclass MEMORY ID mpack.
SELECTION-SCREEN END OF LINE.
Customer objects
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(27) tcust.
PARAMETERS: pcust AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 32(25) tnrange.
PARAMETERS: pcname TYPE namespace MEMORY ID mnamespace.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b2.
Additional things to download.
SELECTION-SCREEN: BEGIN OF BLOCK b3 WITH FRAME TITLE tblock3.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tptext.
PARAMETERS: ptext AS CHECKBOX DEFAULT 'X' MEMORY ID mtext.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tmess.
PARAMETERS: pmess AS CHECKBOX DEFAULT 'X' MEMORY ID mmess.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tpinc.
PARAMETERS: pinc AS CHECKBOX DEFAULT 'X' MEMORY ID minc.
SELECTION-SCREEN COMMENT 40(20) trecc.
PARAMETERS: preci AS CHECKBOX DEFAULT 'X' MEMORY ID mreci.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tpfunc.
PARAMETERS: pfunc AS CHECKBOX DEFAULT 'X' MEMORY ID mfunc.
SELECTION-SCREEN COMMENT 40(20) trecf.
PARAMETERS: precf AS CHECKBOX DEFAULT 'X' MEMORY ID mrecf.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tdoc.
PARAMETERS: pdoc AS CHECKBOX DEFAULT 'X' MEMORY ID mdoc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tpscr.
PARAMETERS: pscr AS CHECKBOX DEFAULT 'X' MEMORY ID mscr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tpdict.
PARAMETERS: pdict AS CHECKBOX DEFAULT 'X' MEMORY ID mdict.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) tsortt.
PARAMETERS: psortt AS CHECKBOX DEFAULT ' ' MEMORY ID msortt.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b3.
File details
SELECTION-SCREEN: BEGIN OF BLOCK b4 WITH FRAME TITLE tblock4.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) tphtml.
PARAMETERS: phtml RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(25) tcomm.
PARAMETERS: pcomm AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(25) tback.
PARAMETERS: pback AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) tptxt.
PARAMETERS: ptxt RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) tppath.
PARAMETERS: pfolder LIKE rlgrap-filename OBLIGATORY MEMORY ID
mfolder.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b4.
Display a directory picker window
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfolder.
DATA: objfile TYPE REF TO cl_gui_frontend_services.
DATA: pickedfolder TYPE string.
DATA: initialfolder TYPE string.
CREATE OBJECT objfile.
IF NOT pfolder IS INITIAL.
initialfolder = pfolder.
ELSE.
objfile->get_temp_directory( CHANGING temp_dir = initialfolder
EXCEPTIONS cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3 ).
ENDIF.
objfile->directory_browse( EXPORTING initial_folder = initialfolder
CHANGING selected_folder = pickedfolder
EXCEPTIONS cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3 ).
IF sy-subrc = 0.
pfolder = pickedfolder.
ELSE.
WRITE: / 'An error has occured picking a folder'.
ENDIF.
initialisation
INITIALIZATION.
Parameter screen texts.
tblock1 = 'Author (Optional)'.
t$tmp = 'Programs only: include local objects'.
tblock2 = 'Objects to download'.
tblock3 = 'Additional downloads for progs, func modules and classes'.
tblock4 = 'Download parameters'.
tauth = 'Author name'.
tpmod = 'Include programs modified by author'.
tcust = 'Only customer objects'.
tnrange = 'Alt customer name range'.
trtable = 'Tables / Structures'.
tptable = 'Table name'.
ttnote = 'Please note: tables are stored under the username of the'.
ttnote1 = 'last person who modified them.'.
trfunc = 'Function modules'.
tpfname = 'Function name'.
tfgroup = 'Function group'.
trclass = 'Classes'.
tpcname = 'Class name'.
tmess = 'Message class'.
tmname = 'Class name'.
tmlang = 'Language'.
tprog = 'Programs'.
trpname = 'Program name'.
tpack = 'Package'.
tptxt = 'Text document'.
tphtml = 'HTML document'.
tcomm = 'Highlight comments'.
tback = 'Include background colour'.
tptext = 'Text elements'.
tpinc = 'Include programs'.
trecc = 'Recursive search'.
tppath = 'File path'.
tpmes = 'Message classes'.
tpfunc = 'Function modules'.
tdoc = 'Function module documentation'.
trecf = 'Recursive search'.
tpscr = 'Screens'.
tpdict = 'Dictionary structures'.
tsortt = 'Sort table fields alphabetically'.
Determine the frontend operating system type.
PERFORM determinefrontendopsystem USING slashseparator.
start-of-selection.
START-OF-SELECTION.
PERFORM checkcomboboxes.
PERFORM fillselectionranges.
downloadfolder = pfolder.
starttime = sy-uzeit.
Fool the HTML routines to stop them hyperlinking anything with a space
*in them
IF pcname IS INITIAL.
customernamespace = '^'.
ELSE.
customernamespace = pcname.
ENDIF.
Main program flow.
CASE 'X'.
Select tables
WHEN rtable.
PERFORM retrievetables USING idictionary[]
sotable[]
soauthor[].
Select message classes tables
WHEN rmess.
PERFORM retrievemessageclass USING imessages[]
soauthor[] "Author
pmname "Message classname
pmlang "Message classanguage
pmod. "Modified by author
Select function modules
WHEN rfunc.
IF pfname+0(1) CA asterix.
Restrict the search to customer objects only.
pcust = 'X'.
ENDIF.
IF pfgroup+0(1) CA asterix.
Restrict the search to customer objects only.
pcust = 'X'.
ENDIF.
PERFORM retrievefunctions USING sofunctionname[] "Function name
sofunctiongroup[] "Function group
ifunctions[] "Foundfunctions
pauth "Author
ptext "Get textelements
pscr "Get screens
pcust "Customer data only
customernamespace. "Customer name range
LOOP AT ifunctions.
Find Dict structures, messages, functions, includes etc.
PERFORM scanforadditionalfuncstuff USING ifunctions[]
preci
"Search for includes recursively
precf
"Search for functions recursively
pinc
"Search for includes
pfunc
"Search for functions
pdict
"search for dictionary objects
pmess
"Search for messages
pcust
"Customer data only
customernamespace.
"Customer name range
ENDLOOP.
Select Classes
WHEN rclass.
IF pclname+0(1) CA asterix.
Restrict the search to customer objects only.
pcust = 'X'.
ENDIF.
PERFORM retrieveclasses USING iclasses[]
ifunctions[]
soclassname[] "Class name
soauthor[] "Author
customernamespace "Customer namerange
pmod "Also modifiedby author
pcust "Customer objectonly
pmess "Find messages
ptext "Text Elements
pdict "Dictionarystructures
pfunc "Get functions
pinc "Get includes
precf "Searchrecursively for functions
preci "Searchrecursively for includes
'X' "Searchrecursively for classes
pmlang. "Language
LOOP AT ifunctions.
Find Dict structures, messages, functions, includes etc.
PERFORM scanforadditionalfuncstuff USING ifunctions[]
preci
"Search for includes recursively
precf
"Search for functions recursively
pinc
"Search for includes
pfunc
"Search for functions
pdict
"search for dictionary objects
pmess
"Search for messages
pcust
"Customer data only
customernamespace.
"Customer name range
ENDLOOP.
Select programs
WHEN rprog.
IF pprog+0(1) CA asterix.
Restrict the search to customer objects only.
pcust = 'X'.
ENDIF.
PERFORM retrieveprograms USING iprograms[]
ifunctions[]
soprogramname[] "Program name
soauthor[] "Author
customernamespace "Customer nam range
pmod "Also modifiedby author
pcust "Customer object only
pmess "Find messages
ptext "Text Elements
pdict "Dictionaystructures
pfunc "Get functions
pinc "Get includes
pscr "Get screens
precf "Search recursively for functions
preci "Searchrecursively for includes
p$tmp "local objects
ppack. "Package
ENDCASE.
end-of-selection
END-OF-SELECTION.
IF forcedexit = 0.
Set the file extension and output type of the file
IF ptxt IS INITIAL.
downloadfileextension = htmlextension.
ELSE.
downloadfileextension = textextension.
ENDIF.
Decide what to download
CASE 'X'.
Download tables
WHEN rtable.
IF NOT ( idictionary[] IS INITIAL ).
PERFORM downloadddstructures USING idictionary[]
pfolder
htmlextension
space
psortt.
Free up any memory used for caching HTML versions of tables
LOOP AT idictionary.
FREE MEMORY ID idictionary-tablename.
ENDLOOP.
GET TIME.
runtime = sy-uzeit - starttime.
PERFORM filltreenodetables USING idictionary[]
itreedisplay[]
runtime.
CLEAR idictionary[].
ENDIF.
Download message class
WHEN rmess.
IF NOT ( imessages[] IS INITIAL ).
SORT imessages ASCENDING BY arbgb msgnr.
LOOP AT imessages.
APPEND imessages TO isinglemessageclass.
AT END OF arbgb.
PERFORM downloadmessageclass USING isinglemessageclass[]
imessages-arbgb
pfolder
downloadfileextension
phtml
space
pcomm
customernamespace
pinc
pdict
pmess.
CLEAR isinglemessageclass[].
ENDAT.
ENDLOOP.
GET TIME.
runtime = sy-uzeit - starttime.
PERFORM filltreenodemessages USING imessages[]
itreedisplay[]
runtime.
CLEAR imessages[].
ENDIF.
Download functions
WHEN rfunc.
IF NOT ( ifunctions[] IS INITIAL ).
PERFORM downloadfunctions USING ifunctions[]
pfolder
downloadfileextension
space
pdoc
phtml
pcomm
customernamespace
pinc
pdict
textextension
htmlextension
psortt.
Free up any memory used for caching HTML versions of tables
LOOP AT ifunctions.
LOOP AT ifunctions-idictstruct ASSIGNING <wadictstruct>.
FREE MEMORY ID <wadictstruct>-tablename.
ENDLOOP.
ENDLOOP.
GET TIME.
runtime = sy-uzeit - starttime.
PERFORM filltreenodefunctions USING ifunctions[]
itreedisplay[]
runtime.
CLEAR ifunctions[].
ENDIF.
Download Classes
WHEN rclass.
IF NOT ( iclasses[] IS INITIAL ).
PERFORM downloadclasses USING iclasses[]
ifunctions[]
pfolder
downloadfileextension
htmlextension
textextension
phtml
pcomm
customernamespace
pinc
pdict
pdoc
psortt.
Free up any memory used for caching HTML versions of tables
LOOP AT ifunctions.
LOOP AT ifunctions-idictstruct ASSIGNING <wadictstruct>..
FREE MEMORY ID <wadictstruct>-tablename.
ENDLOOP.
ENDLOOP.
Free up any memory used for caching HTML versions of tables
LOOP AT iprograms.
LOOP AT iprograms-idictstruct ASSIGNING <wadictstruct>..
FREE MEMORY ID <wadictstruct>-tablename.
ENDLOOP.
ENDLOOP.
GET TIME.
runtime = sy-uzeit - starttime.
PERFORM filltreenodeclasses USING iclasses[]
ifunctions[]
itreedisplay[]
runtime.
CLEAR iclasses[].
CLEAR ifunctions[].
ENDIF.
Download programs
WHEN rprog.
IF NOT ( iprograms[] IS INITIAL ).
PERFORM downloadprograms USING iprograms[]
ifunctions[]
pfolder
downloadfileextension
htmlextension
textextension
phtml
pcomm
customernamespace
pinc
pdict
pdoc
psortt.
Free up any memory used for caching HTML versions of tables
LOOP AT ifunctions.
LOOP AT ifunctions-idictstruct ASSIGNING <wadictstruct>..
FREE MEMORY ID <wadictstruct>-tablename.
ENDLOOP.
ENDLOOP.
Free up any memory used for caching HTML versions of tables
LOOP AT iprograms.
LOOP AT iprograms-idictstruct ASSIGNING <wadictstruct>..
FREE MEMORY ID <wadictstruct>-tablename.
ENDLOOP.
ENDLOOP.
GET TIME.
runtime = sy-uzeit - starttime.
PERFORM filltreenodeprograms USING iprograms[]
ifunctions[]
itreedisplay[]
runtime.
CLEAR iprograms[].
CLEAR ifunctions[].
ENDIF.
ENDCASE.
IF NOT ( itreedisplay[] IS INITIAL ).
PERFORM displaytree USING itreedisplay[].
ELSE.
statusbarmessage = 'No items found matching selection criteria'.
PERFORM displaystatus USING statusbarmessage 1.
ENDIF.
ENDIF.
*--- Memory IDs
User name
SET PARAMETER ID 'MAUTH' FIELD pauth.
Table name
SET PARAMETER ID 'MTABLE' FIELD ptable.
Message class
SET PARAMETER ID 'MMNAME' FIELD pmname.
Function
SET PARAMETER ID 'MFNAME' FIELD pfname.
Function group
SET PARAMETER ID 'MFGROUP' FIELD pfgroup.
Class
SET PARAMETER ID 'MCNAME' FIELD pclname.
Program
SET PARAMETER ID 'MPROG' FIELD pprog.
Customer namespace
SET PARAMETER ID 'MNAMESPACE' FIELD pcname.
Folder
SET PARAMETER ID 'MFOLDER' FIELD pfolder.
Package
SET PARAMETER ID 'MPACK' FIELD ppack.
Text element checkbox
SET PARAMETER ID 'MTEXT' FIELD ptext.
Messages checkbox
SET PARAMETER ID 'MMESS' FIELD pmess.
Includes checkbox
SET PARAMETER ID 'MINC' FIELD pinc.
Recursive includes checkbox.
SET PARAMETER ID 'MRECI' FIELD preci.
Functions checkbox
SET PARAMETER ID 'MFUNC' FIELD pfunc.
Recursive functions checkbox
SET PARAMETER ID 'MRECF' FIELD precf.
Function module documntation checkbox
SET PARAMETER ID 'MDOC' FIELD pdoc.
Screens checkbox
SET PARAMETER ID 'MSCR' FIELD pscr.
Dictionary checkbox
SET PARAMETER ID 'MDICT' FIELD pdict.
Sort table ascending checkBox
SET PARAMETER ID 'MSORTT' FIELD psortt.
****************************************SUBROUTINES*******************
checkComboBoxes... Check input parameters
FORM checkcomboboxes.
IF pauth IS INITIAL.
CASE 'X'.
WHEN rtable.
IF ptable IS INITIAL.
statusbarmessage = 'You must enter either a table name or author.'.
ENDIF.
WHEN rfunc.
IF ( pfname IS INITIAL ) AND ( pfgroup IS INITIAL ).
IF pfname IS INITIAL.
statusbarmessage = 'You must enter either a function name or author.'.
ELSE.
IF pfgroup IS INITIAL.
statusbarmessage = 'Must enter either a func gp, or an author name.'.
ENDIF.
ENDIF.
ENDIF.
WHEN rprog.
IF pprog IS INITIAL.
statusbarmessage = 'You must enter either a program name or
author name.'.
ENDIF.
ENDCASE.
Check the user name of the person objects are to be downloaded for
ELSE.
IF pauth = 'SAP*' OR pauth = 'SAP'.
statusbarmessage = 'Sorry cannot download all objects for SAP
standard user'.
ENDIF.
ENDIF.
IF NOT statusbarmessage IS INITIAL.
PERFORM displaystatus USING statusbarmessage 3.
forcedexit = 1.
STOP.
ENDIF.
ENDFORM. "
"checkComboBoxes
fillSelectionRanges... for selection routines
FORM fillselectionranges.
DATA: valuetofind TYPE string.
IF NOT pauth IS INITIAL.
soauthor-sign = 'I'.
soauthor-option = 'EQ'.
soauthor-low = pauth.
APPEND soauthor.
ENDIF.
IF NOT ptable IS INITIAL.
IF NOT pcname IS INITIAL AND NOT ptable+0(1) = '/'.
CONCATENATE pcname ptable INTO valuetofind.
ELSE.
valuetofind = ptable.
ENDIF.
sotable-sign = 'I'.
sotable-option = 'EQ'.
sotable-low = valuetofind.
APPEND sotable.
ENDIF.
IF NOT pfname IS INITIAL.
IF NOT pcname IS INITIAL AND NOT pfname+0(1) = '/'.
CONCATENATE pcname pfname INTO valuetofind.
ELSE.
valuetofind = pfname.
ENDIF.
sofunctionname-sign = 'I'.
PERFORM addoption USING valuetofind sofunctionname-option.
sofunctionname-low = valuetofind.
APPEND sofunctionname.
ENDIF.
IF NOT pfgroup IS INITIAL.
IF NOT pcname IS INITIAL AND NOT pfgroup+0(1) = '/'.
CONCATENATE pcname pfgroup INTO valuetofind.
ELSE.
valuetofind = pfgroup.
ENDIF.
sofunctiongroup-sign = 'I'.
PERFORM addoption USING valuetofind sofunctiongroup-option.
sofunctiongroup-low = valuetofind.
APPEND sofunctiongroup.
ENDIF.
IF NOT pclname IS INITIAL.
IF NOT pcname IS INITIAL AND NOT pclname+0(1) = '/'.
CONCATENATE pcname pclname INTO valuetofind.
ELSE.
valuetofind = pclname.
ENDIF.
soclassname-sign = 'I'.
PERFORM addoption USING valuetofind soclassname-option.
soclassname-low = valuetofind.
APPEND soclassname.
ENDIF.
IF NOT pprog IS INITIAL.
IF NOT pcname IS INITIAL AND NOT pprog+0(1) = '/'.
CONCATENATE pcname pprog INTO valuetofind.
ELSE.
valuetofind = pprog.
ENDIF.
soprogramname-sign = 'I'.
PERFORM addoption USING valuetofind soprogramname-option.
soprogramname-low = valuetofind.
APPEND soprogramname.
ENDIF.
ENDFORM. "
" fillSelectionRanges
addOption... fills the option value of ranges
FORM addoption USING value(valuetofind)
option.
IF valuetofind CA asterix.
option = 'CP'.
ELSE.
option = 'EQ'.
ENDIF.
ENDFORM. "
"addOption
retrieveTables... -
RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''
Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
ABAP.
DATA: ref_it_tab TYPE REF TO data,
ref_wa TYPE REF TO data.
FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
FIELD-SYMBOLS: <fs_wa> TYPE ANY.
FIELD-SYMBOLS: <fs_field> TYPE ANY.
CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
ASSIGN ref_it_tab->* TO <fs_itab>.
SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
ASSIGN ref_wa->* TO <fs_wa>.
loop at <fs_itab> assigning <fs_wa>.
assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
V_CLIENT = <fs_field>.
assign component 'C0' of structure <fs_wa> to <fs_field>.
V_C0 = <fs_field>.
assign component 'C1' of structure <fs_wa> to <fs_field>.
V_C1 = <fs_field>.
assign component 'C2' of structure <fs_wa> to <fs_field>.
V_C2 = <fs_field>.
assign component 'C3' of structure <fs_wa> to <fs_field>.
V_C3 = <fs_field>.
assign component 'C4' of structure <fs_wa> to <fs_field>.
V_C4 = <fs_field>.
assign component 'C5' of structure <fs_wa> to <fs_field>.
V_C5 = <fs_field>.
assign component 'C6' of structure <fs_wa> to <fs_field>.
V_C6 = <fs_field>.
assign component 'C7' of structure <fs_wa> to <fs_field>.
V_C7 = <fs_field>.
assign component 'C8' of structure <fs_wa> to <fs_field>.
V_C8 = <fs_field>.
assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
V_MESSAGE_ID = <fs_field>.
assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
V_TIMESTAMP = <fs_field>.
assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
V_EXTRACTKEY = <fs_field>.
assign component 'STATEID' of structure <fs_wa> to <fs_field>.
V_STATEID = <fs_field>.
assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
V_DEVICE_ID = <fs_field>.
ENDLOOP.
ENDABAP.
ENDIF.Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
Syntax Error in generated program.
Hi Experts -
I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
I get an error message:
Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
There is a syntax error in the code.
How do you solve this issue?
We applied OSS note 822323 but still get the same error. The code still has the syntax error.
Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!Hi,
Use the program RSA1HCAT in SE38 to check your hierarchy.
Transaction RSA3 was not developed for checking hierarchy DataSources.
Rather, it is only for transaction and attribute/text datasources. If
you want to check the extraction of hierarchy datasources in the R/3
system, you should use the report RSA1HCAT. In this report, enter the
name of the hierarchy datasource in the "DataSource with HierarchyType"
field.
For this problem look at the note: 632920.
Regards,
Srikanth. -
ERROR in Module RSQL &include &P9
Hi Experts,
I have an issue with Solman 7.1, when accessing the transaction solman_workcenter the Gui displays :
“ 500 Sap Internal ERROR
ERROR: Error in module RSQL of the Database interface &INCLUDE &P9 (termination RABAX_STATE).”
In the ST22 trans. Displays
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
ABAP Program CL_POWL_QUERY_ACCESSOR========CP
Application Component CA-GTF-SGF-POW
Date and Time 25.10.2013 12:04:05
Short text
Error in module RSQL of the database interface
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_ACCESSOR========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "GET_VISIBLE_QUERIES" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
On the ST11
Viewing the dev_w# log, I have this:
A ABAP Program CL_POWL_QUERY_ACCESSOR========CP .
A Source CL_POWL_QUERY_ACCESSOR========CM003 Line 92.
A Error Code DBIF_RSQL_INVALID_RSQL.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#18 $ SAP.
A Function ab_HandleRsqlErrors Line 702.
And on the SM21 trans for the system logs I have this
Details Page 2 Line 26 System Log: Local Analysis of grp-dcs 1
Time Type Nr Clt User TCode Grp N Text
12:04:05 DIA 001 400 SOLMAN_ADMIN AB 0 Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Details
Recording at local and central time........................ 25.10.2013 12:04:05
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package 11328 Dialog work process No. 001 SOLMAN_ADMIN 10.1.25. 1 SAPMHTTP T Transaction Problem SABP
I need help with this error, right now I can´t access to my work center, I appreciate it your help and knowledge about this, I’ve looking on service sap without lucky .
Regards.Hi Roman
Thanks for your reply,
There are attached the log files, in the other hand, I’ve trying implementing Sap notes for powl error without no results, the solman is already configured at system preparation, basic configuration, managed system configuration, technical monitoring, and data volume management.
Here is the sp levels
SAP_BASIS 702 0009 SAPKB70209 SAP Basis Component
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
CTS_PLUG 200 0001 SAPK-20001INCTSPLUG SAP CTS Plugin
PI_BASIS 702 0009 SAPK-70209INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0008 SAPKITLRD8 SAP Solution Tools Plug-In
GW_CORE 200 0000 - SAP GW CORE 200
SAP_BS_FND 702 0007 SAPK-70207INSAPBSFND SAP Business Suite Foundation
SAP_BW 702 0009 SAPKW70209 SAP Business Warehouse
SAP_AP 700 0026 SAPKNA7026
WEBCUIF 701 0006 SAPK-70106INWEBCUIF SAP Web UI Framework
BBPCRM 701 0006 SAPKU70106 BBPCRM
BI_CONT 706 0002 SAPK-70602INBICONT Business Intelligence Content
CPRXRPM 500_702 0005 SAPK-50005INCPRXRPM SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP 200 0000 - Backend Event Provider
IW_FND 250 0000 - SAP IW FND 250
ST 710 0004 SAPKITL704 SAP Solution Manager Tool
ST-BCO 710 0002 SAPK-71002INSTBCO ST-BCO 710: Add-On Installation
SOCO 101 0001 SAPK-10101INSOCO SAP Solution Composer Server
ST-A/PI 01Q_700 0001 SAPKITAB7K Servicetools for other App./Netweaver 04
ST-ICO 150_700 0031 SAPK-1507VINSTPL
ST-SER 701_2010_1 0018 SAPKITLOSI SAP Solution Manager Service Tools
I checked all parameters for the ICM, ran again the SPRO options, in fact I configured again the technical system for the solman landscape with no successful -
Error in module RSQL of the database interface.
Hi Expert,
I get this error "Error in module RSQL of the database interface." when the below ABAP statement executed, do you know the root cuase? Thanks.
ABAP Code:
data lt_fact type TABLE OF /BIC/FZRT_C002.
data ls_Fact type /BIC/FZRT_C002.
*SELECT * INTO table lt_fact FROM /BIC/FZRT_C002 WHERE KEY_ZRT_C0021 in lt_RSDIMID and KEY_ZRT_C0022 in lt_caRSDIMID*.
Information in ST22.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZZ_FG" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "ZCA_GET_CUBE_STOCK" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
o ...
You can generally find details in the system log (SM21) and in the
developer trace of the relevant work process (ST11).
In the case of an error, current restrictions are frequently displayed
in the developer trace.
Best Regards,
Andrewi have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
INTO TABLE GT_VIQMEL
FROM VIQMEL
WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal. -
I downloaded and extracted the latest ESR file (Version 10.0.7) this morning. Running SETUP.EXE with no command line switches fails to install Firefox. Ths installation log indicates that the installation has taken 1 second to complete execution. In the Installation log I see the following:
DLL Registration
** ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll **
In the C:\Program Files (x86)\Mozilla Firefox folder there is an uninstall folder as well as an install.log file. No other files or folders exist. Mozilla Firefox does appear in the Programs and Features but shows an icon associated with an unknown application.
I am logged in with a low-rights account but running the SETUP.EXE executable from an elevated command prompt. This should be sufficient to elevate the DLL registration.
Running on Windows 7 SP1 with all applicable updates. I've noticed several other people that have experienced this issue but nobody has a solution.
Thanks in advance for any help!Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
How to insert a standard selection screen on moduled program?
Hi All,
Selection screen can be easily done in classic report by just simply invoking the event "SELECTION-SCREEN"
SELECTION-SCREEN BEGIN OF ...
SELECT-OPTIONS ...
PARAMETERS ...
In the case of moduled program, there will be a PBO and PAI, I have a requirement on my 2nd screen where I need to have a selection screen, but the SELECTION-SCREEN event is not applicable for NOT TYPE 1(Executable) Program.
My Dialog Program Flow:
Main Screen -> Display Screen (should be SELECTION SCREEN) -> Output (3rd screen)
What's the best alternative solution on this scenario?
Thanks.Hi All,
I layout and detailed my question, please see my scenario below:
screen 9000
MODULE user_command_9000 INPUT.
CASE ok_code.
WHEN 'CREATE'.
CALL SCREEN 9001.
WHEN 'DISPLAY'.
"SHOULD CALL A SELECTION SCREEN HERE
"AFTER THE SELECTION SCREEN, IS ANOTHER SCREEN FOR OUTPUT
ENDCASE.
TOP include
SELECTION-SCREEN BEGIN OF SCREEN 9003 AS SUBSCREEN.
PARAMETERS P_PLANT TYPE T001W-WERKS.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR,
S_LICHA FOR MCHA-LICHA,
S_LIFNR FOR LFA1-LIFNR.
SELECTION-SCREEN END OF SCREEN 9003.
Questions:
1. on the PAI of my main screen 9001, how can I call the SUBSCREEN I created using CALL SUBSCREEN?
the code:
CALL SUBSCREEN 9001 INCLUDING 'PROG_NAME' '9002',
is not working / syntax error.
2. Should I call it like this?
WHEN 'DISPLAY'.
CALL SCREEN 9002.
Screen 9002 PBO
CALL SUBSCREEN 9001INCLUDING 'PROG_NAME' 9002',
is not working / syntax error.
Thanks all.
Edited by: Jaime Cabanban on Dec 2, 2009 5:29 PM
Maybe you are looking for
-
Adobe reader 9.3.2 Silent install
I have a network with a few thousand workstaions on it that im am trying to delpoy this incremental patch (reader 9.3.2) to via a batch file. But no matter what format i try, i either cant get the installer to run completely suppresed or if it does
-
Is there a portal upgrade path for 10.1.2 to 10.1.4 for OracleAS Standard Edition One? If so, could someone please point me to the document/download?
-
Question on use of discretionary hyphens
Hello, I hope someone can solve the following conundrum! I want to make sure that compound words (ex: official-looking) do not break at any syllable at the end of the line. It then looks unsightly when the word has two hyphens. If I put a discretiona
-
I have pages in an app that i want to link to from a non apex site. I want the user to log in to apex app and then automatically go to different pages based on the original link to apex. I also want to pass apex login page a value through the link. T
-
Unable2download any content,site requests security questions.hav not set any up
unable2download any content,site requests security questions.hav not set any up&unable2proceed with purchases. please provide response asap.