Error Creating Table
Using Oracle XE.
I'm trying to create a table and getting the following error:
ORA-00904: : invalid identifier
I've created other tables without problems.
My syntax for the table creation script is:
create table tna (
idtna int not null constraint idtna primary key,
idperson int,
empnumb char(30),
surname char(50),
forenames char(50),
company char(30),
dept char(30),
area char(30),
location char(50),
dob DATE,
trade char(75),
shift char(75),
target char(75),
status char(50),
tcost NUMBER(9,2),
approved int,
attained DATE,
provider char(75),
identified char(100),
reassess DATE,
user_ char(20),
createdate DATE,
amenddate DATE,
site_code char(30),
idgenrisk int,
person_site_code char(30),
req_by DATE);
Can anyone see where I'm going wrong?
Try that in sqlplus, and you get this result:
create table tna ( 2 idtna int not null constraint idtna primar
3 idperson int,
4 empnumb char(30),
5 surname char(50),
6 forenames char(50),
7 company char(30),
8 dept char(30),
9 area char(30),
10 location char(50),
11 dob DATE,
12 trade char(75),
13 shift char(75),
14 target char(75),
15 status char(50),
16 tcost NUMBER(9,2),
17 approved int,
18 attained DATE,
19 provider char(75),
20 identified char(100),
21 reassess DATE,
22 user_ char(20),
23 createdate DATE,
24 amenddate DATE,
25 site_code char(30),
26 idgenrisk int,
27 person_site_code char(30),
28 req_by DATE);
identified char(100),
ERROR at line 20:
ORA-00904: : invalid identifier
Identified is obviously a reserved word.
C.
Similar Messages
-
Error creating table on MS SQL Server with OC4J standalone
Hi there,
I'm trying to deploy an EJB application to OC4J standalone using a MS SQL Server 2000 database, MS SQL Server JDBC Drivers and OC4J 9.0.3 standalone but i keep getting this error:
Auto-creating table: create table Functieprofiel_competentieNiveau_CompetentieNiveau_functieprofiel_LBOS_Ear_LBOS_Ejb (Functieprofiel_FUNCTIE_ID bigint identity not null, COMP_ID bigint identity null, NIVEAU_ID sql_variant(255) null)
Error creating table: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Could not create IDENTITY attribute on nullable column 'COMP_ID', table 'Functieprofiel_competentieNiveau_CompetentieNiveau_functieprofiel_LBOS_Ear_LBOS_Ejb'.
Deployment succeeds after this but the application does not run properly. Can anyone help me with this? I have no idea what to do.
Rob HeikoopRb -
if you want to stop the auto-creation of tables, try going to the j2ee/home/config directory of your OC4J installation. Open the application.xml file and modify the attribute autocreate-tables to be set to false.
That should stop the default table creation as a global property, unless you specifically override it at the specific deployed application level.
You can then manually create the tables on the sql-server database instance. If you keep the column names the same as the field names in the bean, then you shouldn't need to do any manual mapping. To be sure of the column names to use, take a look in the orion-ejb-jar.xml which gets generated in the j2ee/home/application-deployments/<app-name>/<ejb-module-name> to see what table/column names the generator defaulted to
-steve-
-steve- -
ERROR creating table with dynamic SQL :-(
Hi friends,
I have a problem when I try to create a table using dynamic SQL.
(Env.: Forms 6i, WinXP, Oracle 9i)
I only want to create a table, insert data and drop the table.
I have a user with the correct privileges (At least ....I think so), because I can to make the three actions in SQL*PLUS (CREATE TABLE, INSERT .. and DROP TABLE).
I want to do the same in Forms using dynamic SQL...
I've made a package with 3 procedures:
1st to create the table, 2nd to insert data , 3rd to drop the table.
Only the 1st fails with the error ORA-01031 (insufficient privileges).
Here it is:
PROCEDURE PRO_DM_CreaTabla(pe_nombre_tabla VARCHAR2) IS
id_cursor INTEGER;
ls_sentencia VARCHAR2(500);
v_dummy integer;
BEGIN
id_cursor := DBMS_SQL.OPEN_CURSOR;
ls_sentencia := 'CREATE TABLE '||pe_nombre_tabla||' ( campo1 VARCHAR2(100), campo2 VARCHAR2(100), campo3 VARCHAR2(100),campo4 VARCHAR2(100))';
DBMS_SQL.PARSE(id_cursor, ls_sentencia, dbms_sql.NATIVE);
v_dummy := dbms_sql.execute(id_cursor);
DBMS_SQL.CLOSE_CURSOR(id_cursor);
END;
The DROP_table procedure is exactly the same as this (with the difference of the 'CREATE' sentence, where I have a DROP sentence)... then.. why the DROP procedure works?... and.. why this CREATE procedure doesn't work?
Any ideas?
Thanks a lot.
Jose.From a different thread, Jose wrote:
V_INSERT:='INSERT INTO TMP_TABLE(field1,field3,field3,field4) VALUES (1,2,3,4)';
Forms_DDL(V_INSERT);
commit;First, try your statement in SQL Plus:
INSERT INTO TMP_TABLE(field1,field3,field3,field4) VALUES (1,2,3,4);
Then if that works, try doing this right after the Forms_DDL(V_INSERT);
If not form_success then
Message(' Insert has failed');
Raise form_trigger_failure;
Else
Forms_DDL('COMMIT');
End if; -
Error while creating table from csv file
I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea?I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea? -
Error while creating table with clusters
Hi
I tried the following
CREATE CLUSTER emp_dept (deptno NUMBER(3))Cluster is created
Then i tried to create the table having the above cluster but giving the errors:
create table emp10 (ename char(5),deptno number(2) )cluster emp_dept(deptno);The error is:
ORA-01753 column definition incompatible with clustered column definitionCould you please help me in thisYour cluster is based on a NUMBER(3) data type while the emp10 table has a deptno column with a data type of NUMBER(2).
-
Using EXECUTE IMMEDIATE with Create Table SQL Statement not working
Hi ,
I am all the privileges given from the SYSTEM user , but still i am not able to create a table under procedure . Please see these and advice.
create or replace procedure sp_dummy as
begin
Execute Immediate 'Create table Dummy99_99 (Dummy_Field number)';
end;
even i tried this way also
create or replace PROCEDURE clearing_Practise(p_file_id in varchar2, p_country in VARCHAR2,p_mapId in VARCHAR2)
AUTHID CURRENT_USER AS
strStatusCode VARCHAR2(6);
BEGIN
EXECUTE IMMEDIATE 'create table bonus(name varchar2(50))';
commit;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('ERROR Creating Table');
END ;William Robertson wrote:
Since the syntax is correct, my guess is you do not have CREATE TABLE system privilege granted directly to your account. A common scenario is that you have this privilege granted indirectly via a role, allowing you to create tables on the command line, but stored PL/SQL is stricter and requires a direct grant and therefore the procedure fails with 'insufficient privileges'.A bit like he's already been told on his first thread...
Using of Execute Immediate in Oracle PLSQL
Generally you would not create tables from stored PL/SQL. Also as you have found out, it's best not to hide exceptions with 'WHEN OTHERS THEN [some message which gives less detail than the one generated by Oracle]'.Again like he was told on the other thread.
There's just no telling some people eh! :) -
Create table from external data with dates
I have a CSV that looks somewhat like this:
abcuser,12345,5/12/2012,5,250.55
xyzuser,67890,5/1/2012,1,50
ghjuser,52523,1/1/1900,0,0
When I create the external table, then query it I get a date error:
CREATE TABLE xtern_ipay
userid VARCHAR2(50),
acctnbr NUMBER(20, 0),
datelastused DATE,
number_rtxns NUMBER(12, 0),
amtused NUMBER(12, 0)
organization external ( TYPE oracle_loader DEFAULT directory "XTERN_DATA_DIR"
ACCESS parameters (
records delimited BY newline fields terminated BY "," )
location ('SubscriberStatistics.csv') ) reject limit UNLIMITED;
Error I see in the reject log:
Field Definitions for table XTERN_IPAY
Record format DELIMITED BY NEWLINE
Data in file has same endianness as the platform
Rows with all null fields are accepted
Fields in Data Source:
USERID CHAR (255)
Terminated by ","
Trim whitespace same as SQL Loader
ACCTNBR CHAR (255)
Terminated by ","
Trim whitespace same as SQL Loader
DATELASTUSED CHAR (255)
Terminated by ","
Trim whitespace same as SQL Loader
NUMBER_RTXNS CHAR (255)
Terminated by ","
Trim whitespace same as SQL Loader
AMTUSED CHAR (255)
Terminated by ","
Trim whitespace same as SQL Loader
error processing column DATELASTUSED in row 1 for datafile g:\externaltables\SubscriberStatistics.csv
ORA-01858: a non-numeric character was found where a numeric was expected
error processing column DATELASTUSED in row 2 for datafile g:\externaltables\SubscriberStatistics.csv
ORA-01858: a non-numeric character was found where a numeric was expected
error processing column DATELASTUSED in row 3 for datafile g:\externaltables\SubscriberStatistics.csv
ORA-01858: a non-numeric character was found where a numeric was expected
Any ideas on this? I know I need to tell oracle the format of the date on the external file, but I can't figure it out.Try this:
CREATE TABLE xtern_ipay
userid VARCHAR2 (50)
, acctnbr NUMBER (20, 0)
, datelastused DATE
, number_rtxns NUMBER (12, 0)
, amtused NUMBER (12, 2)
ORGANIZATION EXTERNAL
( TYPE oracle_loader DEFAULT DIRECTORY "XTERN_DATA_DIR"
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE FIELDS TERMINATED BY "," MISSING FIELD VALUES ARE NULL
( userid
, acctnbr
, datelastused DATE 'mm/dd/yyyy'
, number_rtxns
, amtused)
location ('SubscriberStatistics.csv') ) reject LIMIT unlimited;
select * from xtern_ipay;
USERID ACCTNBR DATELASTU NUMBER_RTXNS AMTUSED
abcuser 12345 12-MAY-12 5 250.55
xyzuser 67890 01-MAY-12 1 50
ghjuser 52523 01-JAN-00 0 0
{code}
Sorry I had to correct the previous statement again for the date format and for the column amtused that was defined without decimals.
Regards
Al
Edited by: Alberto Faenza on May 31, 2012 6:34 PM
wrong date format mm/dd/yy instead of dd/mm/yy
Edited by: Alberto Faenza on May 31, 2012 6:40 PM
Fixed again the date format and the amtused defined with 2 decimals -
Help! 10g logical standby not replicating "create table" on standby
Hi,
I'm setting up a logical standby environment and everything works, except when I tried to create a simple table on the primary, the table doesn't show up on the standby. I tried creating a new tablespace on the primary and it shows up right away on the standby. I checked the error logs on both primary and standby and no errors.
create table test1 (id number(10) primary key, col1 varchar(20), col2 varchar(20));
The table is created successfully on primary and I also inserted couple of rows and all committed.
I even tried the following query on the standby to check any failed events and the "create table" DDL doesn't show up , even if it failed:
select event_time, status, event from dba_logstdby_events order by event_timestamp, commit_scn
So I'm now confused. The logical standby is active and applying. What would be the issue? How do I find out ?
Thankshad you started apply using this syntax
real time apply
alter database start logical standby apply immediate;
check lag:
alter session set nls_date_format='dd/mm hh24:mi';
select newest_time || chr(22)|| newest_scn||chr(10)||applied_time||chr(22)||applied_scn||chr(13)||chr(16)||(newest_scn-applied_scn) lag from dba_logstdby_progress
/ -
Problem auto-creating tables with the IBFBS sample
Hello,
I'm fairly new to JDeveloper and OC4J and am trying to configure the new Financial Brokerage Service (IBFBS) sample to run on my system. I followed all of the setup instructions but have had problems getting the application to work. I've worked through a few issues, but I'm stuck on this one. When deploying/running the application to the JDev embedded OC4J an error occurs when trying to auto-create the tables for some of the EJBs. The error messages are all similar to this:
"Auto-creating table: create table UserAccount_file:_M:_Ja_rfpkl9 (accountNumber NUMBER not null primary key, password VARCHAR2(255) null, firstName VARCHAR2(255) null, lastName VARCHAR2(255) null, organization VARCHAR2(255) null, address VARCHAR2(255) null, city VARCHAR2(255) null, state VARCHAR2(255) null, country VARCHAR2(255) null, phone VARCHAR2(255) null, accountBalance FLOAT null, email VARCHAR2(255) null, userType VARCHAR2(255) null, linesPerPage NUMBER null, alertMode VARCHAR2(255) null, mobileEmail VARCHAR2(255) null)
Error creating table: ORA-00922: missing or invalid option"
The app fails to start with an Ora message "Table or view does not exist"
I think it's due to the colons in the table name, but how do I change the name of the table it's trying to create?
I'm running JDeveloper 9.0.3 preview and 9.2.0.1.0 (patchset 1 applied) database all locally on a Windows XP SP1 machine.
Any help appreciated.
NickHi Nick,
Firstly, regret for the late response.
I guess what you are trying to do is run the Sample from JDeveloper itself. But this cannot be done, you have to deploy the
sample to the embedded OC4J(<JDEV_HOME>/j2ee/home) bundled with JDev and run the sample from embedded OC4J.
Refer to http://otn.oracle.com/sample_code/tutorials/fbs/over/setup.htm and follow the steps to deploy to OC4J.
Curious to know if you were able to run it.
Regards
Elango.
Hello,
I'm fairly new to JDeveloper and OC4J and am trying to configure the new Financial Brokerage Service (IBFBS) sample to run on my system. I followed all of the setup instructions but have had problems getting the application to work. I've worked through a few issues, but I'm stuck on this one. When deploying/running the application to the JDev embedded OC4J an error occurs when trying to auto-create the tables for some of the EJBs. The error messages are all similar to this:
"Auto-creating table: create table UserAccount_file:_M:_Ja_rfpkl9 (accountNumber NUMBER not null primary key, password VARCHAR2(255) null, firstName VARCHAR2(255) null, lastName VARCHAR2(255) null, organization VARCHAR2(255) null, address VARCHAR2(255) null, city VARCHAR2(255) null, state VARCHAR2(255) null, country VARCHAR2(255) null, phone VARCHAR2(255) null, accountBalance FLOAT null, email VARCHAR2(255) null, userType VARCHAR2(255) null, linesPerPage NUMBER null, alertMode VARCHAR2(255) null, mobileEmail VARCHAR2(255) null)
Error creating table: ORA-00922: missing or invalid option"
The app fails to start with an Ora message "Table or view does not exist"
I think it's due to the colons in the table name, but how do I change the name of the table it's trying to create?
I'm running JDeveloper 9.0.3 preview and 9.2.0.1.0 (patchset 1 applied) database all locally on a Windows XP SP1 machine.
Any help appreciated.
Nick -
Auto-creating tables with CMP Explicit Mapping
Hello.
I am trying to migrate a working CMP EJB Jar from Weblogic to OC4J, using the admin.jar deploy utility. I believe my orion-ejb-jar.xml deployment descriptor (shown at the bottom) is set up properly, but OC4J attempts to auto-create tables for my entity beans anyway. (see messages that follow).
Can anybody tell me why it tries to create these tables? Is something missing from my deployment descriptor?
Thanks,
David
Auto-creating table: create table User_passwords_Passwor__fqeml6 (User_SEC_USER.
SEC_USER_ID NUMBER not null, Password_SEC_USER_PASSWORD_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table User_userRoles_UserRol__guatbv (User_SEC_USER.
SEC_USER_ID NUMBER not null, UserRole_SEC_USER_ROLE_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table Permission_RolePermiss__768cc0 (Permission_SEC
FUNCTIONID NUMBER not null, RolePermission_SEC_ROLE_FUNCTION_ID NUMBER null)
Error creating table: ORA-00972: identifier is too long
Auto-creating table: create table Role_UserRole_role_User_39lzhp (Role_SEC_ROLE.
SEC_ROLE_ID NUMBER not null, UserRole_SEC_USER_ROLE_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
Auto-creating table: create table Role_rolePermissions_Ro_4ocmz1 (Role_SEC_ROLE.
SEC_ROLE_ID NUMBER not null, RolePermission_SEC_ROLE_FUNCTION_ID NUMBER null)
Error creating table: ORA-01748: only simple column names allowed here
orion-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE orion-ejb-jar PUBLIC "-//Evermind//DTD Enterprise JavaBeans 1.1 runtime//EN" "http://xmlns.oracle.com/ias/dtds/orion-ejb-jar.dtd">
<orion-ejb-jar deployment-version="9.0.3.0.0" deployment-time="e6e55808e4">
<enterprise-beans>
<session-deployment name="SecurityComponent" >
</session-deployment>
<session-deployment name="ServerSecurityContext" >
</session-deployment>
<session-deployment name="SecurityComponentSecurityFilter" >
</session-deployment>
<entity-deployment name="User" table="SEC_USER" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="userId" persistence-name="SEC_USER.SEC_USER_ID" />
</primkey-mapping>
<cmp-field-mapping name="partyId" persistence-name="PARTY_ID" />
<cmp-field-mapping name="officeLocation" persistence-name="OFFICE_LOCATION" />
<cmp-field-mapping name="defaultLocation" persistence-name="DEFAULT_LOCATION" />
<cmp-field-mapping name="districtVvid" persistence-name="DISTRICT_VVID" />
<cmp-field-mapping name="userName" persistence-name="SEC_USER.USER_NAME" />
<cmp-field-mapping name="accountActivationDate" persistence-name="SEC_USER.ACCOUNT_ACTIVATION_DATE" />
<cmp-field-mapping name="defaultBranchVvid" persistence-name="SEC_USER.DEFAULT_BRANCH_VVID" />
<cmp-field-mapping name="unitVvid" persistence-name="UNIT_VVID" />
<cmp-field-mapping name="sectionVvid" persistence-name="SEC_USER.SECTION_VVID" />
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
<cmp-field-mapping name="failedLoginAttempts" persistence-name="SEC_USER.LOGIN_ATTEMPTS_CNT" />
</entity-deployment>
<entity-deployment name="Permission" table="SEC_FUNCTION" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="permisssionId" persistence-name="SEC_FUNCTION_ID" />
</primkey-mapping>
<cmp-field-mapping name="permission" persistence-name="FUNCTION_NAME" />
</entity-deployment>
<entity-deployment name="Role" table="SEC_ROLE" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE.SEC_ROLE_ID" />
</primkey-mapping>
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
<cmp-field-mapping name="roleDescription" persistence-name="SEC_ROLE.ROLE_DESC" />
<cmp-field-mapping name="roleName" persistence-name="SEC_ROLE.ROLE_NAME" />
</entity-deployment>
<entity-deployment name="Password" table="SEC_USER_PASSWORD" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="passwordId" persistence-name="SEC_USER_PASSWORD_ID" />
</primkey-mapping>
<cmp-field-mapping name="password" persistence-name="PASSWORD" />
<cmp-field-mapping name="activeInd" persistence-name="ACTIVE_IND" />
<cmp-field-mapping name="expirationDate" persistence-name="EXPIRATION_DATE" />
<cmp-field-mapping name="userId" persistence-name="SEC_USER_ID" />
<cmp-field-mapping name="lastUpdateTimestamp" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_DT" />
<cmp-field-mapping name="lastUpdateSystemUserId" persistence-name="AUD_SYSTEM_OBJECT.LAST_UPDATE_SEC_USER_ID" />
</entity-deployment>
<entity-deployment name="UserRole" table="SEC_USER_ROLE" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="userRoleId" persistence-name="SEC_USER_ROLE_ID" />
</primkey-mapping>
<cmp-field-mapping name="sequenceNum" persistence-name="SEQUENCE_NUM" />
<cmp-field-mapping name="userId" persistence-name="SEC_USER_ID" />
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE_ID" />
</entity-deployment>
<entity-deployment name="RolePermission" table="SEC_ROLE_FUNCTION" data-source="datasource-ecmsOraclePool">
<primkey-mapping>
<cmp-field-mapping name="roleFunctionId" persistence-name="SEC_ROLE_FUNCTION_ID" />
</primkey-mapping>
<cmp-field-mapping name="functionId" persistence-name="SEC_FUNCTION_ID" />
<cmp-field-mapping name="roleId" persistence-name="SEC_ROLE_ID" />
<cmp-field-mapping name="sequenceNum" persistence-name="SEQUENCE_NUM" />
</entity-deployment>
</enterprise-beans>
<assembly-descriptor>
</assembly-descriptor>
</orion-ejb-jar>Hi David,
The "autocreate-tables" attribute is defined in the DTD for the "orion-application.xml" file. This file is usually generated automatically by OC4J, from your application's "application.xml" file when you deploy your application. (Note that subsequent [re-]deployments of your application will not change the "orion-application.xml" file.)
The default value for this attribute is 'true', and the default is defined in the "application.xml" file that is located in the "j2ee/home/config" subdirectory of the OC4J installation.
Hope this answers your question.
Good Luck,
Avi. -
Hi,
I am getting an error while creating a table,
create table cs_temp_xml_data as select rowid RW_ID, value(d).getClobVal() xml_value FROM cs_tmp_wcl_xml_data p,table(xmlsequence(extract(p.xml_data,'/records/record'))) d ;
Here cs_tmp_wcl_xml_data contains a data of 600 mb in oracle directory
ORA-04030: out of process memory when trying to allocate 4000 bytes (qmxlu subheap,qmemNextBuf:alloc)
Can anyone help me out regarding this error?check out metalink doc: 543239.996
also bug 3436395. -
Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR
While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thankssteve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj. -
Logical error in creating tables using db link in solaris
Hi,
While creating table using the syntax create table newtab...as select * from tab@dblink .. I am facing a problem. The newtab table created is having a structure different (from datalength point of view of varchar2 and char datatypes) from the source. The data length is getting tripled i.e. if a column a is varchar2(20) in tab then it is becoming --- a varchar2(60) in newtab. This is happening in solaris environment when the two databases are in 2 different servers. Please let me know if there are any patches to resolve the problem.
Thanks
ArnabORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link? -
Error while creating table maintenance generator
Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
SravanthiHi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed. -
Source sys Restore "error while creating table EDISEGMENT "
Dear All,
I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
We have done all BW refresh steps as per guide and during Restore of source system we
are getting errors during datasource activation as " error while creating table EDISEGMENT ".
we have checked RFC and Partner profiles and working fine.
We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
source system we are getting above mentioned error.
We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
those apply to our OLTP system , as one source system from same OLTP system got
successfully activated and source system for other client giving this issue .
Please help us out with this problem.
we are running on BI 7.0 platform and ECC 6.0 for source.
Regards,
Rrcheck the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
hope this helps
regards
santosh
Maybe you are looking for
-
Nokia Music Application Mp3 Downloads fail
I bought a song using the Nokia Music application on my Lumia 920. The first attempt to download started and then stopped within a second of starting. No sign of any sort of progress bar. Mind you, this would be the first time I tried downloading wit
-
Essentially I have a new iPhone and I've done the reset according to your instructions on your site. How do I apply the latest back up from my previous phone so that I can have all of the content, the back up and everything that was connected to the
-
Outlook sent item - to be reflected in office 365 portal
Hi , I need the sent items reflected in outlook to be reflected in office 365 portal ( outlook webmail) can any one help. Thanks, Kathir
-
Help! Light gray magnified apple logo then goes black and dies.
Hi, Whenever I start up my macbook pro a lighter than usual gray screen pops up with a magnified apple logo and spinning wheel, it then proceeds to go to a black screen and stays there. I tried starting it up in single user mode and running fsck but
-
I need to use the F12 key as a function key not as volume
I am using a DOS system for work and need to use the F12 key as a function key and not volume how to I do this....... frustrating!