Error Database synchronization fail
Hello, I have a problem with DataGuard. I found the following error-code:
bkkbrs1:tagtrak:/shared/tagtrak/log > dgmgrl
DGMGRL for Solaris: Version 10.1.0.2.0 Production
Copyright (c) 2000, 2004, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect system/dragon;
Connected.
DGMGRL> show configuration;
Configuration
Name: UltraDgConfig
Enabled: YES
Protection Mode: MaxAvailability
Databases:
trak_bkkbrs1 - Primary database
trak_bkkbrs2 - Physical standby database
Current status for "UltraDgConfig":
Warning: ORA-16608: one or more sites have warnings
The cause of the problem is probably a shutdown of the secondary server. After the server start, it tried to synchronize with the primary server. Later a few days, the synchronization process failed, unable to find the restore point. However, ORACLE process took more than 99% of CPU. What should I do to solve this problem? Could anyone tell me the what I need to proceed. Thank you in advance.
Hi ,
We had a similar error when we logon to SAP BPC 7.5 NW SP06 and it was a program error
SAP suggested to upgrade to SP07. As a workaround you can try restarting your PC for now.
Please let me know which version of BPC you are using . Try executing the below steps you will not see the error further.
1 - Download Patch 1 from Service Market Place.
- Access http://service.sap.com
- Click in Software Downloads;
- Click in Support Packages and Patches;
- Click in A-Z Index;
- Select letter B;
- Click in SAP BPC FOR SAP NETWEAVER;
- Click in SBOP PC 7.5 FOR SAP NW;
- Click in Comprised Software Component Versions;
- Click in SAP CPM BPC CLNT 7.5;
- Click in Win32;
- Download Patch for BPC Client 7.5 SP06;
2 - Uninstall BPC Client and Microsoft Office from the client.
3 - Install Microsoft Office;
4 - Install BPC 7.5 SP6 client;
5 - Install BPC 7.5 SP6 Patch;
After perform the installation please let me know the results.Thanks.
Regards,
Sanjeev
Edited by: sanjeev.s on Jul 5, 2011 1:26 PM
Similar Messages
-
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
UltraLiteJ Error[-857]: Synchronization failed due to an error on the server
Hi,
I have been trying to sync with a syncronization group, In SUP 2.2 and android.
But my android eclipse log cat shows...
Caused by: com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-857]: Synchronization failed due to an error on the server: [-10225] Message: Failure occurred while executing user supplied code
and my SCC logs
shows this type error info,
{"_op":"C","level":5,"code":412,"eisCode":"9502","message":"java.sql.SQLException:SQL Anywhere Error -638: Right truncation of string data","component":"NFAApp_QASDB","entityKey":null,"operation":"synchronize","requestId":null,"timestamp":"2014-04-21 11:50:15.997","messageId":0,"_rc":0}
I have prepared my mbo for SQL store procedure. Please help me!
Thank you.Hi Prashant,
Please mark this Discussion with a Correct Answer and Helpful Answer where appropriate. See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
Regards, Mike
SAP Customer Experience Group - CEG -
J2EE Engine start error: Database initialization failed!
My J2EE engine now fails to start - jcontrol stays yellow. I've followed Troubleshooting pages from help.sap.com Admin manual topic "starting J2EE Engine".
Background:
I was running through JDI Scenario 2+ on a fresh installed WebAS 6.40 at SP9. Using NWDevStudio2.09, I attempted to load a DC, but servers stopped responding. So I downed everything (in MMC) including offlining the DB, then put DB back online and restart the J2E engine, and now jcontrol stays yellow.
I find this in the file log_bootstrap_ID0014430.0.log:
Apr 7, 2005 3:10:23 PM ] Bootstrap MODE:
[Apr 7, 2005 3:10:23 PM ] <INSTANCE GLOBALS>
[Apr 7, 2005 3:10:23 PM ] determined by parameter [ID0014430].
[Apr 7, 2005 3:10:23 PM ] -
[Apr 7, 2005 3:10:26 PM ] Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
.........a few lines cut out here..........
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:344)
............ a few lines cut out here..........
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://PHI21811/J2E [Cannot connect to host PHI21811 [Connection refused: connect], -813.].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:183)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:570)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:294)
... 14 more
[Apr 7, 2005 3:10:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Apr 7, 2005 3:22:24 PM ] -
ANYONE HAVE ANY SUGGESTIONS?????Using the Database Administration section of the help.sap.com library, I found the location of SAPDB/MySQL log files. They are in C:\sapdb\data\wrk\J2E. In 'knldiag' I found entries complaining of Log files being full and tasks put in suspension.
So I figured out to do a full back up of the DB and/or backup the log files. The log file bar (in MMC) still showed 100% full, but I figured out to refresh the view and voila it was empty (so one of the backups emptied it, not sure which one).
After that the DB comes up fine and now my J2E WebAS goes all green.
Message was edited by: Michael W Rains -
Ora 12560 tns protocol adapter error database DBCA fails
hi,
while creating database in oracle 11.2.0.1 using DBCA i am getting following error.
ora 12560 tns protocol adapter error
i am using administrator userid . any soultion for thishi,
i can't post full alert log file. the last lap of alert log file given below
Repeat 6 times
size_t dbktBufferLen_ [00F79E5C0, 00F79E5C8) = 00000016 00000000
sword dbkt_tfi_ [00F7A1750, 00F7A1754) = 0000094F
sword dbkt_tfp_ [00F7A1754, 00F7A1758) = 00000950
sword dbkt_fmdb_ [00F7A1758, 00F7A175C) = 00000951
sword dbktCtrlPrm_ [00F7A175C, 00F7A1760) = 00000952
sword dbktb_param_pool_size_ [00F7A1760, 00F7A1764) = 00000953
sword dbktb_param_in_mem_on_ [00F7A1764, 00F7A1768) = 00000954
struct dbgdEventGrp * dbkdpeg_ [00F79E5C8, 00F79E5D0) = 00000000 00000000
ub8 dbkdpsvn_ [00F79E5D0, 00F79E5D8) = 00000000 00000000
struct dbgdFastChkDesc * dbkdpefc_ [00F79E5D8, 00F79E5E0) = 00000000 00000000
struct dbgdEventGrp * dbkdpaeg_ [00F79E5E0, 00F79E5E8) = 00000000 00000000
ub4 dbkdflg_ [00F7A1768, 00F7A176C) = 00000000
sword dbkdsepf_ [00F7A176C, 00F7A1770) = 00000955
sword dbkdesue_ [00F7A1770, 00F7A1774) = 00000956
kxdam_pga * kxdam_pgap_ [00F79E5E8, 00F79E5F0) = 00000000 00000000
sword kxdam_enable_ [00F7A1774, 00F7A1778) = 00000957
sword kxdam_ioctl_bufsz_ [00F7A1778, 00F7A177C) = 00000958
sword kxdam_slv_req_ntries_ [00F7A177C, 00F7A1780) = 00000959
sword kxdam_enable_online_all_ [00F7A1780, 00F7A1784) = 0000095A
sword ksmpgl_ [00F7A1784, 00F7A1788) = 00000000
----- Dump of the Fixed Generic PGA -----
kgsms * kgsmsp_ [00F77C950, 00F77C958) = 00000000 00000000
kgsmu * kgsmup_ [00F77C958, 00F77C960) = 00000000 00000000
kghds * kgsmpg_ [00F77C960, 00F77C968) = 0F77C650 00000000
Dump of memory from 0x00F77C650 to 0x00F77C690
00F77C650 00000000 00000000 000020C0 00000000 [......... ......]
00F77C660 00000000 00000000 0DE90F18 00000000 [................]
00F77C670 0DE90F78 00000000 00000000 00000000 [x...............]
00F77C680 00000000 00000000 02120200 00000000 [................]
void * kgsmp0_ [00F77C968, 00F77C970) = 00000000 00000000
void * kgsmp1_ [00F77C970, 00F77C978) = 00000000 00000000
void * kgsmp2_ [00F77C978, 00F77C980) = 00000000 00000000
void * kgsmp3_ [00F77C980, 00F77C988) = 00000000 00000000
void * kgsmp4_ [00F77C988, 00F77C990) = 00000000 00000000
void * kgsmp5_ [00F77C990, 00F77C998) = 00000000 00000000
void * kgsmp6_ [00F77C998, 00F77C9A0) = 00000000 00000000
void * kgsmp7_ [00F77C9A0, 00F77C9A8) = 00000000 00000000
void * kgsmp8_ [00F77C9A8, 00F77C9B0) = 00000000 00000000
void * kgsmp9_ [00F77C9B0, 00F77C9B8) = 00000000 00000000
ub4 kgsmpx_ [00F77C9B8, 00F77C9BC) = 00000000
ub4 kgsmpy_ [00F77C9BC, 00F77C9C0) = 00000000
void * kgsmpz_ [00F77C9C0, 00F77C9C8) = 00000000 00000000
kghpg kghpga_ [00F77C9C8, 00F77CA80) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77C9D8 to 0x00F77CA80
00F77C9D0 09B45320 00000000 [ S......]
00F77C9E0 00001000 00000000 00000000 00000000 [................]
00F77C9F0 00000000 00000000 00000000 00000000 [................]
00F77CA00 00000014 00000000 00000018 00000000 [................]
00F77CA10 00000000 00000000 00AA9628 000000FF [........(.......]
00F77CA20 00000000 00000000 00000000 00000000 [................]
Repeat 5 times
kghmpg kghmpga_ [00F77CA80, 00F77CAA0) = 00000000 00000000 00000000 ...
Dump of memory from 0x00F77CA8C to 0x00F77CAA0
00F77CA80 00000000 [....]
00F77CA90 00000000 00000000 00000000 00000000 [................]
kghmprotpg kghmprotpga_ [00F77CAA0, 00F77CACC) = 00000000 00000000 00000000 ...
Dump of memory from 0x00F77CAAC to 0x00F77CACC
00F77CAA0 00000000 [....]
00F77CAB0 00000000 00000000 00000000 00000000 [................]
00F77CAC0 00000000 00000000 00000000 [............]
kghstpg kghstpga_ [00F77CAD0, 00F77CAE8) = 80038000 00000000 00000000 ...
Dump of memory from 0x00F77CADC to 0x00F77CAE8
00F77CAD0 00000000 [....]
00F77CAE0 06E237B0 00000000 [.7......]
ub4 kghstdeszpga_ [00F77CAE8, 00F77CAEC) = 00000000
kgefa * kgefac_ [00F77CAF0, 00F77CAF8) = 00000000 00000000
lxglo * kgelxg_ [00F77CAF8, 00F77CB00) = 0F7805F0 00000000
Dump of memory from 0x00F7805F0 to 0x00F780630
00F7805F0 0F79E278 00000000 08B2F120 00000000 [x.y..... .......]
00F780600 00000000 00000000 00000000 00000000 [................]
00F780610 00000000 00000000 00000002 00000000 [................]
00F780620 00000000 00000000 00000000 00000000 [................]
kgepg kgepga_ [00F77CB00, 00F77D968) = 11F0C700 00000000 11F0C5D8 00000000 ...
Dump of memory from 0x00F77CB10 to 0x00F77D968
00F77CB10 00000000 00000000 00000002 00000000 [................]
00F77CB20 00001D15 00000000 0F77D114 00000000 [..........w.....]
00F77CB30 00000005 00000065 00000000 00000000 [....e...........]
00F77CB40 00000000 00000000 00000000 00000000 [................]
Repeat 92 times
00F77D110 00000001 00000F02 66736B00 69727464 [.........ksfdtri]
00F77D120 2928696E 3530312B 00001002 43434100 [ni()+105.....ACC]
00F77D130 5F535345 4C4F4956 4F495441 0012024E [ESS_VIOLATION...]
00F77D140 44410000 303A5244 30303878 33354438 [..ADDR:0x8008D53]
00F77D150 45384542 00000C02 3A435000 42327830 [BE8E.....PC:0x2B]
00F77D160 34453632 000F0244 4E550000 454C4241 [26E4D.....UNABLE]
00F77D170 5F4F545F 54495257 00000045 00000000 [_TO_WRITE.......]
00F77D180 00000000 00000000 00000000 00000000 [................]
Repeat 120 times
00F77D910 00000000 00000000 0F77D179 00000000 [........y.w.....]
00F77D920 0F77D914 00000000 00000004 00000000 [..w.............]
00F77D930 00000000 00000000 00000000 00000001 [................]
00F77D940 00000000 00000000 00000000 00000000 [................]
00F77D950 00000000 00000000 0F77C950 00000000 [........P.w.....]
00F77D960 00000000 00000000 [........]
ub4 kgeemsg_ [00F77D968, 00F77D96C) = 00000000
ub4 kgestkguard_ [00F77D96C, 00F77D970) = 00000000
skgm_cx * kgeskgmcx_ [00F77D970, 00F77D978) = 0F77C3B0 00000000
Dump of memory from 0x00F77C3B0 to 0x00F77C3F0
00F77C3B0 00000000 00000000 06F7AAC0 00000000 [................]
00F77C3C0 0F77C950 00000000 000000FF 00000001 [P.w.............]
00F77C3D0 EC2AE000 000007FF 00001000 00000000 [..*.............]
00F77C3E0 00010000 00000000 00010000 00000000 [................]
sword kge_max_snap_ [00F77D978, 00F77D97C) = 00000000
sword kge_current_snap_ [00F77D97C, 00F77D980) = 00000000
kge_error_snap * kge_error_snap_arr_ [00F77D980, 00F77D988) = 00000000 00000000
kglpg kglpga_ [00F77D988, 00F77D9A0) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77D998 to 0x00F77D9A0
00F77D990 00000000 00000000 [........]
kgipg kgipga_ [00F77D9A0, 00F77DCB8) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77D9B0 to 0x00F77DCB8
00F77D9B0 00000000 00000000 00000000 00000000 [................]
Repeat 47 times
00F77DCB0 00000000 00000000 [........]
sword * kgsdtf_ [00F77DCB8, 00F77DCC0) = 0F79E60C 00000000
Dump of memory from 0x00F79E60C to 0x00F79E64C
00F79E600 00000000 [....]
00F79E610 00110ED2 00000000 00000000 00000000 [................]
00F79E620 00000000 00000000 00000000 00000002 [................]
00F79E630 00000003 00000000 00000000 00000000 [................]
00F79E640 00000000 00000004 00000005 [............]
struct kggrandctx * kggrpga_ [00F77DCC0, 00F77DCC8) = 00000000 00000000
const kgsf * kgsfpt_ [00F77DCC8, 00F77DCD0) = 06F79DE0 00000000
Dump of memory from 0x006F79DE0 to 0x006F79E20
006F79DE0 00456896 00000000 0077109E 00000000 [.hE.......w.....]
006F79DF0 007710C2 00000000 007710EC 00000000 [..w.......w.....]
006F79E00 0077110A 00000000 00000000 00000000 [..w.............]
006F79E10 00000000 00000000 0077112C 00000000 [........,.w.....]
kgsfpvt kgsfpa_ [00F77DCD0, 00F77DD08) = 005060A8 00000000 00000000 ...
Dump of memory from 0x00F77DCDC to 0x00F77DD08
00F77DCD0 00000000 [....]
00F77DCE0 00000000 00000000 005060A8 00000000 [.........`P.....]
00F77DCF0 00000000 00000000 00000000 00000000 [................]
00F77DD00 00000000 00000000 [........]
kgsup kgsupg_ [00F77DD08, 00F77DD30) = 0F79CFF8 00000000 0F79D010 00000000 ...
Dump of memory from 0x00F77DD18 to 0x00F77DD30
00F77DD10 0F79D008 00000000 [..y.....]
00F77DD20 0F79D000 00000000 0F79D018 00000000 [..y.......y.....]
ldxx * kgsudtx_ [00F77DD30, 00F77DD38) = 00000000 00000000
sword kghxrf_ [00F77DD38, 00F77DD3C) = 00000000
struct kocpg * kocpga_ [00F77DD40, 00F77DD48) = 00000000 00000000
struct kodop * kodopa_ [00F77DD48, 00F77DD50) = 00000000 00000000
struct koipg * koipga_ [00F77DD50, 00F77DD58) = 00000000 00000000
struct kolpg * kolpga_ [00F77DD58, 00F77DD60) = 00000000 00000000
struct kotpg * kotpga_ [00F77DD60, 00F77DD68) = 00000000 00000000
struct kopoc * kopopg_ [00F77DD68, 00F77DD70) = 00000000 00000000
struct kohpg * kohpga_ [00F77DD70, 00F77DD78) = 00000000 00000000
struct kolfpg * kolfpga_ [00F77DD78, 00F77DD80) = 00000000 00000000
struct kolbpg * kolbpga_ [00F77DD80, 00F77DD88) = 00000000 00000000
struct kolepg * kolepga_ [00F77DD88, 00F77DD90) = 00000000 00000000
struct kgxppga * kgxppg_ [00F77DD90, 00F77DD98) = 00000000 00000000
struct kgskpga * kgskpg_ [00F77DD98, 00F77DDA0) = 00000000 00000000
ub2 kgsknumapg_ [00F77DDA0, 00F77DDA4) = 00000000
ub4 kgkprov_ [00F77DDA4, 00F77DDA8) = 00000000
struct kgsnpga * kgsnpg_ [00F77DDA8, 00F77DDB0) = 00000000 00000000
kgmpg kgmpga_ [00F77DDB0, 00F77EA20) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77DDC0 to 0x00F77EA20
00F77DDC0 00000000 00000000 00000000 00000000 [................]
Repeat 197 times
kpummpgastat kpummpgastat_ [00F77EA20, 00F77EAF8) = 00000000 00000000 ...
Dump of memory from 0x00F77EA28 to 0x00F77EAF8
00F77EA20 00000000 00000000 [........]
00F77EA30 00000000 00000000 00000000 00000000 [................]
Repeat 11 times
00F77EAF0 00000000 00000000 [........]
struct kgapga_t * kgapga_ [00F77EAF8, 00F77EB00) = 00000000 00000000
kpggpft_t kpggpft_ [00F77EB00, 00F77EB10) = 00000000 00000000 00000000 00000000
const kpggdt_t * kpggdft_ [00F77EB10, 00F77EB18) = 00000000 00000000
ub1 * kpggrtc_ [00F77EB18, 00F77EB20) = 00000000 00000000
kpggtsk_t kpggtsk_ [00F77EB20, 00F77EB28) = 00000000 00000000
void * kpggtcx_ [00F77EB28, 00F77EB30) = 00000000 00000000
void * kpggctx_ [00F77EB30, 00F77EB38) = 00000000 00000000
struct kooosc * kpggosc_ [00F77EB38, 00F77EB40) = 00000000 00000000
ub4 kpggflg_ [00F77EB40, 00F77EB44) = 00000000
ltsmx kpggmtx_ [00F77EB48, 00F77EBE0) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EB58 to 0x00F77EBE0
00F77EB50 00000000 00000000 [........]
00F77EB60 00000000 00000000 00000000 00000000 [................]
Repeat 7 times
sb2 kpggmxc_ [00F77EBE0, 00F77EBE4) = 00000000
ltstid kpggmxt_ [00F77EBE4, 00F77EBEC) = 00000000 00000000
sword * kpggtrg_ [00F77EBF0, 00F77EBF8) = 00000000 00000000
kpdusrcb ** kpggucb_ [00F77EBF8, 00F77EC00) = 00000000 00000000
void * kpggshp_ [00F77EC00, 00F77EC08) = 00000000 00000000
ltsmx kpggsmx_ [00F77EC08, 00F77ECA0) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EC18 to 0x00F77ECA0
00F77EC10 00000000 00000000 [........]
00F77EC20 00000000 00000000 00000000 00000000 [................]
Repeat 7 times
sb2 kpggsmc_ [00F77ECA0, 00F77ECA4) = 00000000
ltstid kpggsmt_ [00F77ECA4, 00F77ECAC) = 00000000 00000000
ltsctx * kpgglts_ [00F77ECB0, 00F77ECB8) = 00000000 00000000
void * kpggmcx_ [00F77ECB8, 00F77ECC0) = 00000000 00000000
kpdalocty kpggmal_ [00F77ECC0, 00F77ECC8) = 00000000 00000000
kpdfreety kpggmfr_ [00F77ECC8, 00F77ECD0) = 00000000 00000000
kpdralocty kpggmrl_ [00F77ECD0, 00F77ECD8) = 00000000 00000000
kpggpg_t* kpggpg_ [00F77ECD8, 00F77ECE0) = 00000000 00000000
kpdusrcb ** kpggrcb_ [00F77ECE0, 00F77ECE8) = 00000000 00000000
kpdusrcb ** kpggecb_ [00F77ECE8, 00F77ECF0) = 00000000 00000000
kpdLdap * kpggldp_ [00F77ECF0, 00F77ECF8) = 00000000 00000000
kpggdpp_t kpggdpp_ [00F77ECF8, 00F77ED00) = 00000000 00000000
kglspg kglspga_ [00F77ED00, 00F77ED10) = 00000000 00000000 00000000 00000000
kglrpg kglrpga_ [00F77ED10, 00F77ED28) = 00000000 00000000 00000000 ...
Dump of memory from 0x00F77ED1C to 0x00F77ED28
00F77ED10 00000000 [....]
00F77ED20 00000000 00000000 [........]
struct qcpgx* qcpga_ [00F77ED28, 00F77ED30) = 00000000 00000000
hoxgecb hoxgec_ [00F77ED30, 00F77ED40) = 00000000 00000000 00000000 00000000
qmxpg qmxpga_ [00F77ED40, 00F77EE78) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77ED50 to 0x00F77EE78
00F77ED50 00000000 00000000 00000000 00000000 [................]
Repeat 17 times
00F77EE70 00000000 00000000 [........]
qmtpg qmtpga_ [00F77EE78, 00F77EEA0) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EE88 to 0x00F77EEA0
00F77EE80 00000000 00000000 [........]
00F77EE90 00000000 00000000 00000000 00000000 [................]
qmspg qmspga_ [00F77EEA0, 00F77EEB0) = 00000000 00000000 00000000 00000000
qmtmpg qmtmpga_ [00F77EEB0, 00F77EEC0) = 00000000 00000000 00000000 00000000
qmdpg qmdpga_ [00F77EEC0, 00F77EED8) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EED0 to 0x00F77EED8
00F77EED0 00000000 00000000 [........]
kglsim_pga * kglsimpga_ [00F77EED8, 00F77EEE0) = 0DE90F98 00000000
Dump of memory from 0x00DE90F98 to 0x00DE90FD8
00DE90F90 00000000 00000000 [........]
00DE90FA0 00000000 00000000 00000000 00000000 [................]
00DE90FB0 0043D842 00000000 00000000 00000000 [B.C.............]
00DE90FC0 00000000 00000000 00000000 00000000 [................]
00DE90FD0 00000000 00000000 [........]
kngpga * kngpg_ [00F77EEE0, 00F77EEE8) = 00000000 00000000
kgqbtpg kgqbtpga_ [00F77EEE8, 00F77EEF8) = 00000000 00000000 00000000 00000000
kgscpg kgscpga_ [00F77EEF8, 00F77EF28) = 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EF04 to 0x00F77EF28
00F77EF00 00000000 00000000 00000000 [............]
00F77EF10 00000000 00000000 00000000 00000000 [................]
00F77EF20 00000000 00000000 [........]
kgxpg kgxpga_ [00F77EF28, 00F77EF48) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F77EF38 to 0x00F77EF48
00F77EF30 00000000 00000000 [........]
00F77EF40 00000000 00000000 [........]
kgss_dispatch kgss_dispatch_ [00F77EF48, 00F77EFC8) = 80011009 00000000 ...
Dump of memory from 0x00F77EF50 to 0x00F77EFC8
00F77EF50 004C273A 00000000 004C7958 00000000 [:'L.....XyL.....]
00F77EF60 004C2870 00000000 004C3D14 00000000 [p(L......=L.....]
00F77EF70 004C3E30 00000000 004C3E72 00000000 [0>L.....r>L.....]
00F77EF80 004C3EE4 00000000 004C4386 00000000 [.>L......CL.....]
00F77EF90 004C43A4 00000000 004C43C2 00000000 [.CL......CL.....]
00F77EFA0 004C47BE 00000000 004B9A40 00000000 [[email protected].....]
00F77EFB0 004C47DC 00000000 004C520E 00000000 [.GL......RL.....]
00F77EFC0 004C5F76 00000000 [v_L.....]
kgghst * kgodmfht_ [00F77EFC8, 00F77EFD0) = 00000000 00000000
struct kgnfspctx * kgnfsp_ [00F77EFD0, 00F77EFD8) = 00000000 00000000
kgs_heap_t ** kgs_top_pga_ [00F77EFD8, 00F77EFE0) = 00000000 00000000
kgs_heap_t ** kgs_top_sga_ [00F77EFE0, 00F77EFE8) = 00000000 00000000
kgs_heap_t ** kgs_top_uga_ [00F77EFE8, 00F77EFF0) = 00000000 00000000
kgs_heap_t ** kgs_top_cga_ [00F77EFF0, 00F77EFF8) = 00000000 00000000
kgs_pga_reserve_t kgs_pga_ [00F77EFF8, 00F77F098) = 0DE90878 00000000 ...
Dump of memory from 0x00F77F000 to 0x00F77F098
00F77F000 00000000 00000000 00000000 00000000 [................]
Repeat 8 times
00F77F090 00000000 00000000 [........]
kgs_control_t * kgs_pga_control_ [00F77F098, 00F77F0A0) = 00000000 00000000
kgb_instance_t * kgs_pga_instance_ [00F77F0A0, 00F77F0A8) = 00000000 00000000
kgs_control_t * kgs_sga_control_ [00F77F0A8, 00F77F0B0) = 00000000 00000000
kgb_instance_t * kgs_sga_instance_ [00F77F0B0, 00F77F0B8) = 00000000 00000000
kgs_heap_t * kgs_pga_stack_ [00F77F0B8, 00F77F0C0) = 00000000 00000000
kgs_get_t kgs_get_ [00F77F0C0, 00F77F0C8) = 00000000 00000000
kgs_release_t kgs_release_ [00F77F0C8, 00F77F0D0) = 00000000 00000000
kgs_memset_t kgs_safe_memset_ [00F77F0D0, 00F77F0D8) = 00000000 00000000
kgt_table_t * volatile kgt_pga_table_ [00F77F0D8, 00F77F0E0) = 00000000 ...
Dump of memory from 0x00F77F0DC to 0x00F77F0E0
00F77F0D0 00000000 [....]
kgt_table_t * volatile kgt_sga_table_ [00F77F0E0, 00F77F0E8) = 00000000 ...
Dump of memory from 0x00F77F0E4 to 0x00F77F0E8
00F77F0E0 00000000 [....]
dbgc * dbgc_ [00F77F0E8, 00F77F0F0) = 0DE504F8 00000000
Dump of memory from 0x00DE504F8 to 0x00DE50538
00DE504F0 00000001 00000000 [........]
00DE50500 00000000 00000000 00000000 00000001 [................]
00DE50510 00000003 00000000 0DE51198 00000000 [................]
00DE50520 09D088A0 00000000 00000001 00000000 [................]
00DE50530 00000000 00000000 [........]
kgscm_pga_reserve_t kgscmpga_ [00F77F0F0, 00F7804F0) = 00000000 00000000 ...
Dump of memory from 0x00F77F0F8 to 0x00F7804F0
00F77F0F0 00000000 00000000 [........]
00F77F100 00000000 00000000 00000000 00000000 [................]
Repeat 318 times
ldxg* pgasysdate_ [00F7804F0, 00F7804F8) = 00000000 00000000
ldxx pgadcx_ [00F7804F8, 00F7805E8) = 00000000 00000000 00000000 00000000 ...
Dump of memory from 0x00F780508 to 0x00F7805E8
00F780500 00000000 00000000 [........]
00F780510 00000000 00000000 00000000 00000000 [................]
Repeat 12 times
00F7805E0 00000000 00000000 [........]
struct ctxdef* pgactxg_ [00F7805E8, 00F7805F0) = 00000000 00000000
lxglo klcsglo_ [00F7805F0, 00F780670) = 0F79E278 00000000 08B2F120 00000000 ...
Dump of memory from 0x00F780600 to 0x00F780670
00F780600 00000000 00000000 00000000 00000000 [................]
00F780610 00000000 00000000 00000002 00000000 [................]
00F780620 00000000 00000000 00000000 00000000 [................]
00F780630 00000002 00000000 00000000 00000000 [................]
00F780640 00010000 00BE0000 00010000 00000000 [................]
00F780650 00000000 00000000 00000000 00000000 [................]
Repeat 1 times
skgdspc * pgactx_set_stack_ [00F780670, 00F780678) = 00000000 00000000
struct kksfr * kksfra_ [00F780678, 00F780680) = 00000000 00000000
kgstmPg kgstmPg_ [00F780680, 00F7807C8) = 00000000 00000000 00000000 ...
Dump of memory from 0x00F78068C to 0x00F7807C8
00F780680 00000000 [....]
00F780690 00000000 00000000 00000000 00000000 [................]
Repeat 17 times
00F7807B0 9AE7D7D7 00000002 00000000 00000000 [................]
00F7807C0 00000000 00000000 [........]
struct { struct kghds ds; struct kghbk b[(1)]; } kgcsubhp_
Dump of memory from 0x00F7807C8 to 0x00F780850
00F7807C0 00000000 00000000 [........]
00F7807D0 00000000 00000000 00000000 00000000 [................]
Repeat 7 times
kgc_comp_type_cb kgcpgcomptypecb_ [00F780850, 00F780858) = 00000000 00000000
ub4 kgcpscinitdone_ [00F780858, 00F78085C) = 00000000
ub4 kgftrclvl_ [00F78085C, 00F780860) = 00000000
kgefa * kgfefac_ [00F780860, 00F780868) = 00000000 00000000
void * kgfspare_ [00F780868, 00F780870) = 00000000 00000000
----- Dump of the Fixed SGA -----
***** SGA not mapped *****
----- Dump of the Fixed USGA -----
***** no UGA ***** -
"Database logon failed" error received after upgrading from CR XI to CR 200
We have a bunch of reports that use ttx files and datasets. The code to support this was written and compiled originally using .NET 2.0 and CR XI. After recompiling using .NET 3.5 and CR 2008 (not the version that came with VS2008), when I run the reports, I now receive an error "Database logon failed". after clicking throught he error, I am prompted to enter a username and password. Just for the heck of it, I entered my database userame and password with no luck. I cancelled out of the login dialog and the frae of the report appeared but no report. No code was changed. How do I fix this?
I know that I should convert the reprots to use xml schema files but I have over 300 reports and this will take time. I need to get this fixed ASAP. After I get this running, I can then [leisurely] fix the reports and use xsd files.Since the reports were create off of ttx files, they would be expecting a recordset at that time. How are you passing the data to the reports with CR 2008 and VS 2008?
Also, see the following:
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
And don't forget to search these forums - a fair amount of info in this topic here. The search box in the top right corner of this web page will also give you a number of blogs, KBases, wikis articles and more. E.g.; the search term "ttx net crystal", brought up the above two KBases (along with a number of other content).
Oh. If this is critical, remember you always have the option of creating a phone case;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Oct 7, 2011 7:04 AM -
Xcelsius - Database logon failed. (LO 26603)
Hi Expert,
I have a error when run .swf file.
The first, I create new query from SAP toolbar integration in Crystal Report 2008. The Crystal Query is called from a BW Query . The query have not variables, the data get directly from BW Query.
I saved Crystal Report file into BOE (File -->Save -->Enterprise, not save on BW).
In Infoview, I setup schedule for this .rpt file with information database logon below (default as inform in Set Database Location of Crystal Report):
- Database server: xxx.xxx.xxx.xxx (BW server)
- User name: User in BW
- Password: Password in BW
In Xcelsius, I use Live Office to get data from crystal on BOE to Excel sheet on Xcelsius.
In data-->Connection, I changed <server:8080> by <IP BOE System:8080>.
When I preview or export to swf file, a message box appear require input user name and password of BW server (Database logon). After I input correct password, a message box User Identification appear, I input System, User name, Password on BOE server and chose Authentication Enterprise. And final, I get error message " Database logon failed. (LO 26603)".
I try opening Crystal Report file on Infoview and Refresh data, I also input database logon by BW User, the data refresh correctly.
Why do crystal report file update data from BW correct, while .swf file is not and return error Database Logon failed.
Please explain for me what step I missed to get data through Live Office.
ThanksHi Priya,
Thanks for your support.
I have set the default credentials in database configuration.
But my dashboard still can't work. When I preview dashboard, A prompt for database logon information appear, I can logon sucess and refresh data. But after I logon username and password on BOE for BOE User Identification with Authentication Enterprise, I still get error " Database logon failed".
Who can explain for me what steps I miss.
Thanks -
Database logon failed when opening report with parameter values in CrystalReportViewer
Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
TonyHi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot -
CR2008 rt on IIS 6: COMException (0x8004100f): Database logon failed
I have installed the CR 2008 runtime msi on IIS6. It's the initial CR 2008 runtime - not sp0.
Database = MS SQL Server 2000
Connectivity= OLEDB
On the first run all the reports run ok.
If I refresh the page in the browser, all the reports run ok.
Once the report is displayed, all the reports except one fail when the user clicks on a drill down or changes the zoom.
Here is the error:
Database logon failed.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Database logon failed.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8004100f): Database logon failed.]
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.FindGroup(FindGroupRequestContext pFindGroupRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.FindGroup(FindGroupContext reqContext) +328
[LogOnException: Database logon failed.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +687
CrystalDecisions.ReportSource.EromReportSourceBase.HandleException(Exception exception) +108
CrystalDecisions.ReportSource.EromReportSourceBase.FindGroup(FindGroupContext reqContext) +343
CrystalDecisions.CrystalReports.Engine.FormatEngine.FindGroup(FindGroupContext reqContext) +44
CrystalDecisions.ReportSource.LocalReportSourceBase.FindGroup(FindGroupContext reqContext) +133
CrystalDecisions.Web.ReportAgent.FindGroup(Int32[] groupPath) +112
CrystalDecisions.Web.GroupTree.HandleGroupTreeNavigate(String groupPath, String drillName) +40
CrystalDecisions.Web.GroupTree.HandlePostBackEvent(JsonObject jsonEventArgs) +70
CrystalDecisions.Web.ReportAlbum.HandlePostBackEvents(JsonObject jsonEventArgs) +47
CrystalDecisions.Web.CrystalReportViewer.RaisePostBackEvent(String eventArgument) +449
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
On a side note: The BusinessObjects logo has been disabled in the aspx script. But the report that runs ok, once it has been zoomed it shows the logo on the second run and in the subsequent runs. It's almost like there is a new aspx session created. The difference between the report that runs an the others is the database connection which is dfined as (local) while for the reports that fail the database connection is defined via the server name.I'm not sure why you'd install the "initial CR 2008 runtime - not sp0"? I would highly recommend installing SP 0 which can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100005985842008E/cr120_mm.zip
MSI is here:
https://smpdl.sap-ag.de/~sapidp/012002523100005985862008E/cr120_redist_install.zip
However, there are a lot of assumptions we're making here, the biggest one being that the app works on your development computer and you get the issue once you deploy the runtime(?). Anotehr assumption is that you are working with CR 2008 SP 0 on your dev computer.
Ludek -
Hi everyone,
I know this is a famous error in CR but due to my special case, I need to make sure before enacting any further actions.
We are developing a java application which uses CR2013 as its report server (32bit) installed on a 2012 windows server (64bit) and uses ODBC oracle client as database connection to our application's database (32bit).
The main functionality of CR is showing some reports in HTML format and in parallel, our application connects to CR in the background, generates the PDF version of the reports and places it in the database. We still have not got CR2013 license (before this we had 2008 licensed version but our software team are moving to 2013 and we, as the test team, have to) and CR2013 is working with a trial one. The issue we get when we try to generate more than a couple of reports is the following :
com.company.software.report.control.ReportInterfaceImpl:generatePdfStream:110]-[ERROR] Database logon failed.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Database logon failed.---- Error code:-2147217393 Error code name:dbLogonFailed
and after this error, you cannot generate any more reports, even if you close all of your sessions or anything. Every time you try to generate a report (whether its generating the pdf in the background or not) we see this error again until we restart CR or its server.
We had this issue in our CR2008 long time ago, and when we had the license, everything worked pretty well.
As our client is going to buy a license soon, so I need to make sure this problem's root cause is the license. My concern is that putting the license in the server does not make this problem go away.
As obvious, im not good at CR, we only use this for generating reports. I hope people in this community can help me over this issue.May have something to do with .Refresh().
If you search for crlogger you'll find how to enable our database logging component. May tell you what you are looking for.
Don -
'Database logon failed (LO 26603) - Please HELP ME!
Hi everybody...
i need your help for an authentication issue whit LIVE OFFICE connections from Xcelsius2008 to Crystal Report Server 2008.
I've just connected other reports data in Xcelsius2008 but generating the SWF sometimes the SWFs can not logon and refresh the live office objects (ex. Crosstabs).
The error message is the following:
'Database logon failed (LO 26603)'
During the SWF's generation in Xcelsius (Live Office), it requires me the authentication to Logon in the Database, if I insert the correct authentication, Xcelsius refreshes the data (downloaded by CRServer) but before that it shows the Preview, it requires the authentication for Crystal Report Server 2008;
in this windows i select:
Sys: ServerName
User: Admin
Password: Password
Autentication: Enterprise
After this step, for some SWFs the data are refreshed and it works correctly, other times it shows the same error: 'Database logon failed (LO 26603)'
May you explain me why for some "live office connections" i have this problem and other times not?Hi
There is a known issue for live office database logon credentials in Xcelsius 2008 Release note document.
"A Live Office-enabled SWF file using a Crystal Report that requires
database logon credentials will fail to refresh. This occurs because the
SWF file does not prompt the user for database logon credentials, even
if required by the report.
To ensure the data is refreshed properly, the SWF file and the Crystal
Report must be saved to the same BusinessObjects Enterprise system.
A BusinessObjects Enterprise administrator must then enter the report's
database logon information in the Central Management Console so that
credentials are not required when the report is refreshed."
Woud you please check your LO and see whether it is the reason some work well and some not?
BR,
Sammi
Edited by: Sammi Sun on May 7, 2009 8:02 AM -
Database creation failed. review
Hi!
Thank Colin to help me.
I have used the oracle enterprise edition.
The log file shows:
- ERROR: The 'CREATE DATABASE' statement for the sid1 database
failed.
egrep failed to find 'ORA-' error in the file:
/u01/app/oracle/admin/sid1/create/crdbsid1.1st
Pls help me again.
Best Regards
nullWelkin (guest) wrote:
: Hi,
: When I install the oracle with install new product-Create DB
: objects, I received the error "Database creation failed. Please
: check log file". I don't know what go wrong. I have followed
the
: instruction of the installation of oracle on Redhat 5.2
: downloaded from htt://jordan.fortwayne.com/oracle. If anyone
can
: help me, please send me email. Thank you!
: Best Regards
: Welkin Fung
Thank you, it is use for only 8.0.5.0 Standard Edition but I
have Enterprise Edition I cannot create some file so What should
I do.
null -
OAM:Database Validation Failed While Trying to Add New RDBMS Profile
It's about DB connection with OAM 10.1.4 through OCI in Windows Server 2003.
The error in OAM identity console: Database Validation Failed
The error in OAM component logs: TNS:could not resolve the connect identifier specified%0a Error Code from OCIErrorGet^12154
My working environment is 'Integrated IDM 10.1.4' downloaded in FF, the following is its description:
This image is based off the OIM 9.0.3 image built by Sanjay Rallapalli. The underlying environment on which the image is built includes the following component and any associated user name/password combinations:
Windows 2003 Active Directory (Administrator/abcd1234)
Exchange 2003 (Administrator/abcd1234)
Sun One Directory Server (cn=Directory Admin/abcd1234)
Microsoft IIS
Microsoft Certificate Authority
Tomcat J2SE Server
The image also includes a number of Oracle components including:
Oracle DB 10G (sys, system/abcd1234)
Oracle OC4J (http://ten.mydomain.com:7777/em oc4jadmin/abcd1234)
Oracle Identity Manager (xelsysadm/xelsysadm)
Oracle Virtual Directory (cn=admin/abcd1234)
Oracle Access Manager (Administrator/abcd1234)
Owner: Michael Terra Creation Date: 24-JUL-08 Rating: Not Rated
VM OS: Windows Server 2003
It seems an old problem as there are many articles in metalink treating it.
Although I tried every solution proposed by metalink, I still get my 'Database Validation Failed'. I have restarted my system and rechecked in metalink several times.
I'd like to know is there anyone who has successfully configured OAM connecting with Oracle DB through OCI in Windows? Could you tell me is there anything special I have to do? Thanks a lot.Hi All,
I am trying to configure the audting for OAM 10.4.0.1 with OID as user store/Policy store. My oracle DB (10.1.0.5.0--comes bundled with OID) is on same host.
I am trying to configure the audit database in OCI mode as there is some issue with installation of ODBC driver that i was not able to resolve.
While creating RDBMS profile i am also getting the same error *"Database validation failed*" and in identity server logs stated as "*SqlAdapter Error OCIerrormap cpp:53 'OCI failed to create environment variable' method^OCI Adapter::OCI Adapter ociRetcode^ OCIError"*
Does anyone able to successfully configure the audit database with same environment or let me know where i am missing or additional steps required.
Thanks in advance! -
Database logon failed. Database Vendor Error Code: 0
Hi all,
I'm running a java web application and use crystal report XI.
It works normally. One thing is : i would like to change the "Connection URL" when runtime.
These are my config:
_CRConfig.xml :
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<ExternalFunctionLibraryClassNames>
<classname> </classname>
<classname> </classname>
</ExternalFunctionLibraryClassNames>
<keycode>B6W60-01CS200-00GEGC0-0EX1</keycode>
<Javaserver-configuration>
<DataDriverCommon>
<JavaDir>C:\Business Objects\j2sdk1.4.2_08\bin</JavaDir>
<Classpath>C:\Business Objects\Common\3.5\java/lib/crlovmanifest.jar;C:\Business Objects\Common\3.5\java/lib/CRLOVExternal.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServerCommon.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJDBCServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBXMLServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaBeansServer.jar;C:\Business Objects\Common\3.5\java/lib/external/CRDBXMLExternal.jar;C:\Business Objects\Common\3.5\java/lib/external/log4j.jar;C:\Business Objects\Common\3.5\java/lib/cecore.jar;C:\Business Objects\Common\3.5\java/lib/celib.jar;C:\Business Objects\Common\3.5\java/lib/ebus405.jar;C:\Business Objects\Common\3.5\java/lib/corbaidl.jar;C:\Business Objects\Common\3.5\java/lib/external/freessl201.jar;C:\Business Objects\Common\3.5\java/lib/external/asn1.jar;C:\Business Objects\Common\3.5\java/lib/external/certj.jar;C:\Program Files\Business Objects\Common\3.5\java/lib/external/jsafe.jar;C:\Business Objects\Common\3.5\java/lib/external/sslj.jar;C:\tomcat\common\lib\oracle-driver.jar${CLASSPATH}</Classpath>
<IORFileLocation>${TEMP}</IORFileLocation>
<JavaServerTimeout>1800</JavaServerTimeout>
<JVMMaxHeap>256000000</JVMMaxHeap>
<JVMMinHeap>32000000</JVMMinHeap>
<NumberOfThreads>100</NumberOfThreads>
</DataDriverCommon>
<JDBC>
<CacheRowSetSize>100</CacheRowSetSize>
<JDBCURL>jdbc:mysql://Komodo-vmw:3306/warcraft</JDBCURL>
<JDBCClassName>com.mysql.jdbc.Driver</JDBCClassName>
<JDBCUserName>root</JDBCUserName>
<JNDIURL></JNDIURL>
<JNDIConnectionFactory></JNDIConnectionFactory>
<JNDIInitContext>/</JNDIInitContext>
<JNDIUserName>weblogic</JNDIUserName>
<GenericJDBCDriver>
<Default>
<ServerType>UNKNOWN</ServerType>
<QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
<StoredProcType>Standard</StoredProcType>
<LogonStyle>Standard</LogonStyle>
</Default>
<Sybase>
<ServerType>SYBASE</ServerType>
<QuoteIdentifierOnOff>OFF</QuoteIdentifierOnOff>
<DriverClassName>com.sybase.jdbc2.jdbc.SybDriver</DriverClassName>
<StoredProcType>Standard</StoredProcType>
<LogonStyle>MySQL</LogonStyle>
</Sybase>
</GenericJDBCDriver>
</JDBC>
<XML>
<CacheRowSetSize>100</CacheRowSetSize>
<PreReadNBytes>4096</PreReadNBytes>
<XMLLocalURL></XMLLocalURL>
<SchemaLocalURL></SchemaLocalURL>
<XMLHttpURL></XMLHttpURL>
<SchemaHttpURL></SchemaHttpURL>
</XML>
<JavaBeans>
<CacheRowSetSize>100</CacheRowSetSize>
<JavaBeansClassPath></JavaBeansClassPath>
</JavaBeans>
</Javaserver-configuration>
</CrystalReportEngine-configuration>
_JSP file :
public ConnectionInfos setLogon() {
String dbUser = "root";
String dbPassword ="root";
ConnectionInfos oConnectionInfos=null;
try
//Create a new ConnectionInfos and ConnectionInfo object;
oConnectionInfos = new ConnectionInfos();
ConnectionInfo oConnectionInfo = new ConnectionInfo();
//Set username and password for the report's database
oConnectionInfo.setUserName(dbUser);
oConnectionInfo.setPassword(dbPassword);
PropertyBag pro = new PropertyBag();
Map<String, String> bag = new HashMap<String, String>();
bag.put("Connection URL", "jdbc:mysql://Komodo-vmw:3306/warcraft");
bag.put("Server Type", "JDBC (JNDI)");
bag.put("Database DLL", "crdb_jdbc.dll");
bag.put("Database Class Name", "com.mysql.jdbc.Driver");
oConnectionInfo.setAttributes(new PropertyBag(bag));
//Add object to collection
oConnectionInfos.add(oConnectionInfo);
} catch(Exception se) {
se.printStackTrace();
System.out.println("[error in setLogon ]");
return oConnectionInfos;
And i got error every times i run the report :
Database logon failed. Database Vendor Error Code: 0
Please help me.Thank you so much!Hi quang.
can u tell me how to solve this issue? on trying to open a report am facing this issue!
TIA -
When synchronization fails to create a backup, iTunes gives an error.
When synchronization fails to create a backup, iTunes gives an error.
iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.When synchronization fails to create a backup, iTunes gives an error.
iPhone 4, OS 5, Windows XP S3, iTunes 10. ITunes was moving a few times. Please help me.
Maybe you are looking for
-
Some question about International Travel
Ok so i know alot of people have question about international travel weather is USA to Canada, Canada to USA or where ever. So i just got off the phone with someone from AT&T these are my questions for them. i hope it can help, im confuse myself. *1.
-
iTunes keeps saying "song can no longer be made into a ringtone" But it is saying it for every song. I have on multiple song from my library clicked on the little ringtone thing and it keeps coming up saying "this song can no longer be made into a ri
-
During update, error occured and Itunes became non-responsive and shut down. My Itouch is now locked in the itunes update screen and is no longer identified by my computer. How do I fix this problem?
-
Change item level field (in table VEDA) in Contract (VA41)
Hi freinds, I am creating a Contract (VA41) & I want to change the value of "Contract validity period" (VEDA-VLAUFZ) in item level. Anyone know any exit to do that ? I have tried user exits in MV45AFZZ, but there was no appropriate one where I could
-
Hello everybody, I have just installed jdk 6u1 on my linux RedHat as 4 system. I just executed the file and then added a PATH to my environment. I run apps like HelloWorld with no problem, but when it comes to a bit more complex ones I get these erro