Error display PDF doc with zoom=75% oder zoom=125%

Hi,
I'm using Adobe Acrobar Reader X 10.1.4 (but the problem occurs unter Acrobat Reader 9 too) and have a big problem:
If using a zoom factor of 100%, all looks fine, the Text is "63+1,5"
But if I'm using a zoom factor of 125%, the text is wrong: "63-1,5"
I've got this problem with a lot of pdf files (example)
Any idea, how to solve this problem?
Ciao
Frank

See http://forums.adobe.com/thread/1408375

Similar Messages

Getting Runtime error while including pdf doc with Form guides.

Hi,
I have urgent requirement where I have to capture the data in the PDF doc   what user enters into the form Guides.
I am trying this on ES2.
I followed the steps what they mentioned at :: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm - >>Creating Guides using LiveCycle Workbench ES2 -> Including the PDF doc with a document.
They mentioned that we have to create form design (pdf) with same data model.. But When i tries to create form design by including the data model .. it is not allowing to me save as pdf and its telling that we have to save as xdp only.   So saved as xdp only and followd all the same steps what they mentioned .. but we are getting error like :::
2010-01-07 17:13:08,227 ERROR [com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker] An exception was thrown with name com.adobe.repository.ResourceNotFoundException message: ALC-REP-018-000: Resource
[/Form/SampleFormGuides/1.0/Form/MyInformation.xdp] does not exist or you do not have sufficient rights to access it. while invoking service RepositoryService and operation readResourceContent and no fault routes were found to be configured.
Please find my form guide setting to invoke my REST URL.. and my process.
please help me in this regard ,,,,,

Hi Han,
The problem might be in path of the resources. Please check the path for the pdf you includes at form guide.
Please check concat( ) operation .. make sure that it is correct and pointing as per your work bench.
And
At Configuring the REST endpoint for the PDF render service:,   6th point , please select   as System level rather than INVOKE_PERM.
I hope it helps.
Thanks
Praveen.

How to display pdf file with java code?

Hi All,
i have a jsp pagein that page if i click one icon then my backing bean method will call and that method will create pdf document and write some the content in that file and now i want to display that generated pdf document.
it should look like you have pressed one icon and it displayed pdf file to you to view.
java code below:
FacesContext fc = FacesContext.getCurrentInstance();
ExternalContext ec = fc.getExternalContext();
HttpServletResponse resp = (HttpServletResponse) ec.getResponse();
resp.setHeader("Content-Disposition", "filename=\"" + temppdfFile);
resp.encodeRedirectURL(temppdfFile.getAbsolutePath());
resp.setContentType("application/pdf");
ServletOutputStream out = resp.getOutputStream();
ServletUtils.returnFile(temppdfFile, out);
out.flush();
and above temppdfFile is my generated pdf file.
when i am executing this code, it was opening dialog box for save and cancel for the file, but the name of the file it was showing me the "jsp file name" with no file extention (in wich jsp file i am calling my backing bean method) and type is "Unknown File type" and from is "local host"
it was not showing me open option so i am saving that file then that file saved as a pdffile with tha name of my jsp file and there is nothing in that file(i.e. empty file).
what is the solution for this. there is any wrong in my code.
Please suggest me.
Thanks in advance
Indira

public Object buildBarCodes() throws Exception
File bulkBarcodes = null;
String tempPDFFile = this.makeTempDir();
File tempDir = new File("BulkPDF_Files_Print");
if(!tempDir.exists())
tempDir.mkdir();
bulkBarcodes = File.createTempFile
(tempPDFFile, ".pdf", tempDir);
//bulkBarcodes = new File(tempDir, tempPDFFile+"BulkBarcode"+"."+"pdf");
if(!bulkBarcodes.exists())
bulkBarcodes.createNewFile();
Document document = new Document();
FileOutputStream combinedOutput = new FileOutputStream(bulkBarcodes);
PdfWriter.getInstance(document, combinedOutput);
document.open();
document.add(new Paragraph("\n"));
document.add(new Paragraph("\n"));
Image image = Image.getInstance(bc.generateBarcodeBytes(bc.getBarcode()));
document.add(image);
combinedOutput.flush();
document.close();
combinedOutput.close();
FacesContext facesc = FacesContext.getCurrentInstance();
ExternalContext ec = facesc.getExternalContext();
HttpServletResponse resp = (HttpServletResponse) ec.getResponse();
resp.setHeader("Content-Disposition", "inline: BulkBarcodes.pdf");
resp.encodeRedirectURL(bulkBarcodes.getAbsolutePath());
resp.setContentType("application/pdf");
resp.setBufferSize(10000000);
ServletOutputStream out = resp.getOutputStream();
ServletUtils.returnFile(bulkBarcodes, out);
out.flush();
return "success";
This is my action method which will call when ever i press a button in my jsp page.
This method will create the barcode for the given barcode number and write that barcode image in pdf file
(i saw that pdf file which i have created through my above method, This PDF file opening when i was opening manually and the data init that is also correct means successfully it writes the mage of that barcode)
This method taking the jsp file to open because as earlier i said it was trying to open unknown file type document and i saved that file and opended with editplus and that was the jsp file in which file i am calling my action method I mean to say it was not taking the pdf file which i have created above it was taking the jsp file

Acrobat XI Pro - How can I have clients sign pdf docs with stylus on my Tablet PC WITHOUT having to subscribe to signature services like EchoSign?

I was told there was a "Setting" in XI Pro that would allow me to have clients sign pdf documents with a stylus on my Tablet PC (I have a MS Surface Pro 2), without having to sign up for EchoSign or any other electronic signature service. Is that correct? If so, what is the setup or settings?

There are several third party plugins for Adobe Reader and Acrobat on the market, which allow to use the display of a tablet PCs as a capture device for handwritten signatures. Some of those plugins are enabling also the combination with real digital signatures without the need of any previous registration of the signatory.
You can check for :
SignDoc by SoftPro
SigPDF by Signature Perfect

Cannot display pdf form with Adobe Reader 9.1.3

Since the last update of my Reader (last version is 9.1.3), I can't display pdf form in the workspace. I got a blank page.
Is anybody have the same problem?

- Go to the registry HKEY_CLASSES_ROOT > Software > Adobe >Acrobat> delete any older version that is older than the one you just updated to make sure it contains only the current one you have for both Acrobat Reader and/or Pro version since it did not removed when you uninstall or update.
- Also go the installed directory where you installed the Acrobat and delete any folder that contains older version, same here with the registry, it did not remove when you uninstall/update acrobat reader or pro.
The above steps also solve the problem of can not open pdf file within Internet Explorer or browser as well.
Han

Problem in Displaying .PDF & .doc

Hi,
i have uploaded some .PDF file in portal administration.
when i tried to display the .PDF file in workshop its displaying the junk characters only.
when i uploaded some .html files, its displaying properly.
i am using
request.getContextPath()+"/ShowBinary"+childID.getPath()
this for displaying images and .html files.
please let me know how to display .PDF and .doc files in workshop.
regards.

Have you set the mime type on the response?
Kunal Mittal

Error displaying PDF

Hi all,
I am trying to display a PDF doc in LabVIEW using the Activex controls. It works fine most of the time. But some times i get a bland pop up of Adobe Reader. Once i get this, when ever i perform any actions on my vi like wiring, this pop up keeps on coming. Has anyone faced this issue?
Any help would be appreciated..
Regards,
Nitz
Attachments:
Display PDF.vi ‏13 KB

NitzZ wrote:
Hi all,
I am trying to display a PDF doc in LabVIEW using the Activex controls. It works fine most of the time. But some times i get a bland pop up of Adobe Reader. Once i get this, when ever i perform any actions on my vi like wiring, this pop up keeps on coming. Has anyone faced this issue?
Any help would be appreciated..
Regards,
Nitz
You mean to say that even in the edit mode you are getting the pop-up?.
The best solution is the one you find it by yourself

Can I have a library of PDF docs with version control? Can it cope with version nos. embedded in the file name?

I manage a set of documents which are edited in Word but "published" as PDFs (using Word 2010's save to PDF capability).
I want to create a library for them on SharePoint (my company has SharePoint Online via its Office 365 subscription).
I'm pretty much a SharePoint novice but even I can see it's easy to upload the documents to a simple library. The things that are giving me a headache are:
Can I tell SharePoint what the version number of the uploaded PDF document is? The version number as understood by the library needs to match the version number written into the document (where it is called a revision number and increments in whole numbers
starting from zero).
How do I handle replacing the uploaded PDF documents with new versions? If they were Word documents I could edit them by opening them from the SharePoint library, checking them out if necessary, and SharePoint would handle version control.
But since the PDFs are generated from editable masters (Word documents) which are NOT on SharePoint I would need to edit the local Word document on my PC then generate a PDF version then upload it to replace the existing PDF document in the
library. Is it easy to upload a new document over the top of an old in a SharePoint library?
Hoping someone can give me some answers.
Regards,
Bruce Officer

hi Bruce,
1. It sounds like what you need is to set the starting version number since your revision number increments in whole numbers, it would match up to SharePoint once the starting version number is set. You can potentially create a new custom field in the
library to manually track the version of the uploaded PDF document, but this might not match up with SharePoint's own version number and could get confusing. Another possibility is to upload dummy versions of the PDF document until the SP version
matches with the revision version and then delete these dummy versions.
2. When you upload the PDF document again into the library, it should prompt you to see if you want to replace the existing. If you proceed with the upload, it should replace and increment the SharePoint version number.
Please Mark Answered if my reply solves your problem. Thanks!
Jeff Thai
Technical Solutions Architect, AvePoint
http://www.AvePoint.com

Can't open PDF doc with 9.1

I have numerous clients that have Adobe Acrobat 5 AND Acrobat Reader 9.1.
They use version 5 to edit and create pdf's and they use 9.1 Reader to receive new orders.
They have to open the emailed PDF Attachment with 9.1 but when they try to open it, it continues to use version 5 instead of Reader 9.1.
I've verified the File association is setup to open with 9.1 but still no luck... it still opens with 5.
Now if they save an attachment to the hard drive and open it, it does open with 9.1.
Any suggestions?
Pls help,
Steve

Have them try opening Reader before using the e-mail. That may resolve the issue. Many e-mail packages also have a list of applications and associated extensions. If your client is one of them, try changing the association in your client.

Is it possible to design a GUI for Displaying KM Docs with limited options?

Hi all,
The task is to secure the documents published in KM and accessible (read&write)to a limited group,the proposal is to display the docs in a new GUI which lacks options like, "save as , print,copy,paste," and i should also be able to disable certain Keyboard strokes like "printscreen,ctrl+C" etc.
Request you all to tell me the possiblity of such GUI design else kindly suggest me any other alternative like role based splitting....etc...
Many thanks in advance
SantoshKumar Adapa

Hi Santosh,
you may fulfill your requirement from these links
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8]
see the link "customization Change the layout, context menus as per your choice!" from the below link
[https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/251732004]
hope this helps you
vv

SAFARI DOES NOT DISPLAY PDF DOCS.

Does anyone know why my Safari browser suddenly does not show PDF docs in the browser window? It used to. I use Version 2.04. A message does appear that says "plug-in cancelled". I don't know why.
Acrobat opens it in Firefox fine, but nothing happens in Safari. I prefer Safari for viewing PDFs online because it is more convenient than having Acrobat start up and drop files on my hard drive. Any help would be greatly appreciated. Thanks very much.
Mike

Hi,
I prefer Safari for viewing PDFs online because it is more convenient than having Acrobat start up and drop files on my hard drive. Any help would be greatly appreciated. Thanks very much.
Hmm yes i can relate much better then launching adobe, for my needs.
Go to System preferences-> Quick time preferences->Advanced tab
see the -> MIME settings, click the button,
Images: click to expand the list, make sure PDF is not selected.
Let me know if this helps any?
Eme '~[)

Optimize a PDF doc with form fields

Hi All,
I have completed a PDF with multiple form fields (about 70). It's only one 8.5 x 11 page. It is 2.2 mB large. I've tried different ways of Optimizer but it always removes the input field functionality.
How can I decrease file size while maintaining the integrity of the form? Thank you so much in advance. PDF attached.
Dina

Generally, the only thing that I remove after creating a pdf file with forms that doesn't effect the fields is to remove embedded fonts. It would be best to to all of the other optimizations before creating the form fields.
That's nice you say, but I've got the form fields already. Try reducing the size (as you have already done), then replace the page in the file with the form fields with the one whose size you have reduced. The form fields should stay. I don't know what happens to the size of the new file, let us know?

Error displaying pdf (only for one user)

Hello,
A user is facing a problem when running a program that displays a pdf. He gets the error :
"Adobe could not open "xxx.pdf" because it*s either not a supported file type or because the file has been damaged..."
All other users can see correctly the pdf.
Any ideas why could this happen?
Thanks

Hi Lalmar,
You might be trying to download a pdf file and lock it with password using webservice. If there is a connection problem, the pdf would be corrupted.
But as you are saying its specific to a particular user ask him to check re-installing Adobe.
Regards,
P Gomatheeswaran

Cannot create any PDF docs with Acrobat Pro 7.0

I have Adobe Acrobat Pro 7.0 running on Microsoft XP. All of a sudden, I cannot
convert any documents into PDFs. I have tried converting Microsoft Word
docs and those from other applications. It is important to stress that I
have managed to do this many times in the past, but for some reason Acrobat
has suffenly stopped doing this. I have tried 'printing' to PDF and
'converting' to PDF. Each time I get the following error message on a
'Notepad':
"%%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo:
CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
Error accessing color profile: U.S. Web Coated (SWOP) v2
%%[ Warning: PostScript error. No PDF file produced. ] %%"
I have clicked on 'Detect & Repair' under the 'Help' menu button in Adobe
Acrobat and this supposedly did some form of reinstalling/fixing (without
the need for a CD to be inserted into the computer) and asked me to turn off
my computer & then turn it back on.
Having done this, I still cannot get docs to convert to PDF.
I have not added any particular hardware or software to my computer in
recent times. Apart from the PDF conversion, everything else in Adobe
Acrobat Pro seems to run fine. I can read all documents etc.
Can you help me?
Thanks,
Alan

OK, I've got everything to work - so long as I 'Print' docs to PDF rather than clicking on the PDF conversion icons (if I click on these icons, I just get an error).
But if I print to PDF, everything now works - I've even managed to solve the Word problem - I think it was a faulty Word doc for some reason. I found a useful document which told me how to set up all the settings for Acrobat Distiller (http://mydocs.epri.com/docs/CorporateDocuments/WorkingWithEPRI/CreatingAcrobatPDFs.pdf).
If you know how to make the PDF conversion icons work (it must be something simple) that'll save me having to print each time, it would be great, but I can survive without this.

Error displaying numeric values with SPREADSHEET output

Hi, I'm using Reports 10g R2 and I have all my reports with PDF output, they render just fine.
I want to render some of them with SPREADSHEET output but don't know why in some case numeric values are rendered as ****** instead of the corresponding number.
The same report shows numeric values correctly in PDF but no in some Excel cells, just SOME of them, not all.
I know that Excel column is not short because the internal value of the cell are the asterisks.
What could be happening?
Thanks!

Hi Ruby,
please refer to some very basic documentation on CRM 2007 Webclient UI or the IC Webclient of CRM 4.0.
What you are trying to do is create a value node and your code ABAP is wrong.
Here a code sample. Typed it by hand so there might be errors in it.
data:
ls_struct type /mystructure,
lr_struct_ref type ref to data,
lr_node type ref to cl_bsp_wd_value_node.
ls_struc-/attribute1/ = 'Hallo Welt'.
get reference of ls_struct into lr_struct_ref.
create object lr_node
exporting iv_data_ref = lr_struct_ref.
typed_context->/yourNode/->collection_wrapper->add( lr_node ).
cheers Carsten

Error display PDF doc with zoom=75% oder zoom=125%

Similar Messages

Maybe you are looking for