Error during BI Configuration on OBIEE 11.1.7.0 install
HI Gurus,
I am trying to install OBIEE 11.1.1.7.o in a Linux 64 box. However at step 1 (Creating Domain) I've got the error below. Does someone knows what could be happen ?
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Thanks in advance
Sorry but, what are you meaning ? Why did you suspect about hostname and IP address ?
Similar Messages
-
ID, IR error when try to login (JNDI error) during SSL configuration
I'm in the process to configure SSL on SAP J2EE Engine. I'm following the document of SAP library and "Enabling SSL and client certificates on SAP J2EE Engine" by Angel Dichev of RIG, SAP Labs.
I deployed the SAP Java Cryptographic Toolkit and update the unlimited strength jurisdiction policy files.
As per document, I changed the default setting from SSL provider service for the Dispatcher from manual start to always start.
After this step, I have problems to log in IR and ID ( SLD and RWB are working), getting the follow errors ( after click on ID or IR, got the login screen for user/pwd and after entering getting the error):
"Unable to map from JNDI delivered class com.sap.engine.services.jndi.persistent.UnsatisfiedReferenceImpl to class com.sap.aii.ib.sbeans.login.LoginServiceHome registered during login service"
Any solution of this problem?
Regards
AmarThanks Ravi
I created the certificate and then it work for one day. Today morning, i received the certificate request response from SAP trust centre and imported into our server.
I have inported into Key storage of visual admin as per guide. Is there any other place to check it?
Again logon to IB fail with the same error.
Any idea?
Regards
Amar -
Error during test configuration
Hi friends,
Hope u all r doing well.
I am getting the an error while doing Test configuration in ID.
I am getting the error in the step 'Interface determination & mapping' -> Interface mapping.
*Interface Mapping <Not found>*
*Runtime error*
*com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MTO_MTI_MM_: RuntimeException in Message-Mapping transformatio~*
I have succesfully tested both the msg mapping and interface mapping in IR
Please help me out.
The following is the entire stack trace
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">Interface Mapping http://debansu.com MIOA_MIIA_MI </Trace> <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MTO_MTI_MM_ </Trace> <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd </Trace> <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>hi Debansu Sarkar .
let do this:
copy the structure from IR to test configuration, also be sure you put all right parametes like, BS and MI.
in test configuration, the fist step you configure the sender agreement, there, put the BS an sender MI, after put the payload and run test.
see this blog
Test Your XI Configuration With The New Test Tool
thanks
Ps: Reward points if usefull -
Error during STMS configuration
I had perform a system copy with different system ID from the source system successfully. I encounter some problem during the STMS configuration. I already set all the configuration for the target system but when I tried to transport one configuration from one client to another, it prompts out error as below:
Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile
However, when I check back the source system, there are no such problem even without the 2 files above.Swiber SAP wrote:
If I did not use the same name as the source system database, the transport number will begin with the new system ID. Is there way where I can import the transport number from the source system to the target system?
In normal practice, SID of development, quality and production system's SID's are different, and we do the transport between these systems. So, answer of your question is you can do the transport if SID is different.
My question to you are :
Have you reconfigured STMS after system refresh ? What is role of the system that is created after system copy ? What is transport route of your systems in which are doing transport ?
Thanks
Sunny -
Error during the configuration of communication channel
Hi ,
I am trying to create a senario where XI will send the DEBMAS Idocs to the SAP system.
Can you please help me as to how sould i go about configuring this senarion.
The error i am getting is -
Communication channel is not configured correctly. Choose a different communication channel----- when i am trying to assign the communication channel to the receiver.
Thanks for the help
NikhilHi,
1. at first you can take a look at:
http://server:port/mdt/amtServlet
find you channnel type and your channel and see if there's any error over there
2.tell us all of the channel parameters that you've configured so far
Regards,
michal -
Error during the configuration wizard
I am installing the PI 7.1 ehp1 on AIX/Oracle.
While executing the configuration wizard, the following error occurs.
How to resolve this error? Any information would be appreciated.
Error: The configuration wizard attempted to execute synchronizeSLDAccessor method from class com.sap.ctc.util.pi.services.ExchangeProfileSetup of component sap.com/com.sap.xi.ctc.app that is not present in the system. Please contact support to resolve the issueI did not set the class path manually, I only used the sapinst wizard.
How to check the class path and if the com.sap.aii.adapter.lib.zip is not installed, how to install it?
It may not be related,
because I wanted to change the PI default client from 001 to 100, I executed the client copy, change UME to new client and deploy LM CONFIGURATION(LMCFG01P Patch 02) according to the SAPnote 1309239 Q4. -
Error during EHP4 - Configuration phase
Hi All ,
Im doing an EHP-4 on QAS system, last week i did EHP-4 on DEV system and it was succesful. Im using the same software but
a new XML file has been generated for QAS system. Its a Dual Stack system and now it is in JAVA phase,
JSPM_CHECK_QUEUE and it ends with an error .
I checked the log files and this is what it says
Deployment of archive G:\EHPDownloads\JSPM03_0-20002796.SCA has been rejected because it is already deploye Validation has finished with warning.
Detailed message is All selected SDAs and SCAs have already been deployed before..
Aug 6, 2009 8:21:36 PM [Warning]: com.sap.sdt.j700.deploymentmgr.DeploymentManagerImpl [Thread[main,5,main]]: Deployment of archive G:\EHPDownloads\JSPM03_0-20002796.SCA has been rejected because it is already deployed.
Aug 6, 2009 8:21:36 PM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createAndValidateQueue(JSPMSpStackQueuePreparator.java:184) [Thread[main,5,main]]: Creating jspm queue sapjup-queue from sp stack file G:\EHPDownloads\SMSDXML_QAS_20090806071823.012.xml.
Aug 6, 2009 8:26:01 PM [Error]: Exception has occurred during the execution of the phase.
Aug 6, 2009 8:26:01 PM [Error]: com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Validation of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is E:\usr\sap\QAS\DVEBMGS00\j2ee\JSPM\log\log_2009_08_06_20_21_38.
Aug 6, 2009 8:26:01 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:702) [Thread[main,5,main]]: The validation of the deploy queue was not successful.
Aug 6, 2009 8:26:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Has any one seen this error before ??
Regards,
Ershad AhmedHello All,
I was able to resolve the issue
I checked the logs in \usr\sap\QAS\DVEBMGS00\j2ee\JSPM\log\log_2009_08_07_12_20_42
upon checking i found that it was searching for two kernel files which were not there .
FYI, when i downloaded the software and i checked i found that there were 2 diff kernel files, so i removed these files
and started EHP-4
To resolve this issue i had to place these files back in the download directory.
Regards,
Ershad Ahmed -
Error During executing query from OBIEE
Hi,
I have installed EBS and i have integrated OBIEE with EBS. (on Windows server 2003).
Now after logging to OBIEE, I went to the subject area for creating a Query.
After selecting the column when i press button "Display Result"
The following message is displayed.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 23006] The session variable, NQ_SESSION.ICX_SESSION_COOKIE, has no value definition. (HY000)
SQL Issued: SELECT "- Equipment"."Organization (Department Hierarchy)" saw_0 FROM "Manufacturing Hub Catalog" ORDER BY saw_0
I have added the entry for my DB in Data Source (ODBC).
Please tell me the reason for this error.
Regards,
Niranjan.Hi,
i have a problem:
when i open a query with OBI Answers i have this error:
Error Code:OPR4ONWY:U9IM8TAC:OI2DL65P
Stato: HY000. Codice: 10058. NQODBC [SQL_STATE: HY000|http://forums.oracle.com/forums/] [nQSError: 10058|http://forums.oracle.com/forums/] Si è verificato un errore generico({color:#ff0000}generic error{color}). [nQSError: 16001|http://forums.oracle.com/forums/] Stato errore ODBC: 28000 codice: 18456 messaggio: Microsoft[ODBC SQL Server Driver|http://forums.oracle.com/forums/][SQL Server|http://forums.oracle.com/forums/]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.. (HY000)
Istruzione SQL eseguita: SELECT BEN010_TIPO_BENEFIT.X_DESCRIZIONE saw_0 FROM dbo ORDER BY saw_0
What's the problem and can i do?
Sorry for my bad english.
I'm waiting an answer..
Tanks.
Roberto Testa
Edited by: user10366555 on 7-ott-2008 2.42 -
Error during the installation of OBIEE 11g
Hi all,
i have an issue with OBIEE 11g when installing it on windows seven .It stops in the creation of the instance as .
when i read the log file i saw this : java.outofmemoryerror permgen space
my question is how can i increase the permgen space ?
Thanks allCheck this link
http://prasadmadhasi.com/2011/11/13/increase-java-heap-size-for-oracle-map-builder/
Also check
http://www.unitask.com/oracledaily/2012/02/29/obiee-11-1-1-ibm-jdk-tuning-for-weblogic-11g-under-aix-6-x/
Pls mark if helps -
Hello I am having difficulty installing my Adobe so how can i install it without and error code poping up?
Hi chukwuka99904147,
Please tell us the error that you're receiving, what version of Acrobat you're installing, and whether you're on Mac OS or Windows.
When we have a few more details, we should be able to point you in the right direction.
Best,
Sara -
Error during Installation of OBIEE 11.1.1.6
Hi All,
I am facing following error during in installation of OBIEE 11.1.1.6 ON WIN 2008 SERVER. Before begin the installation I have done uninstall of OBIEE 11.1.1.5.
Any help would be appreciated.
*************** Trying to Start OPMN **************
*************** Executing Command **************
cmd /c C:\Users\S_ORAC~1\AppData\Local\Temp\Opmn1337233127128.bat
C:\Users\S_ORAC~1\AppData\Local\Temp>SET ORACLE_HOME=D:\OBIEE_Home\Oracle_BI1
C:\Users\S_ORAC~1\AppData\Local\Temp>CALL "D:\OBIEE_Home\instances\instance2\bin\opmnctl.bat" startproc ias-component=coreapplication_obiccs1
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=pdc03srv160:9501
Response: 0 of 1 processes started.
ias-instance id=instance2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obiccs1/OracleBIClusterControllerComponent/BIClusterController/
Error
--> Process (index=1,uid=151980586,pid=2976)
time out while waiting for a managed process to start
Log:
none
java.lang.Exception: opmnctl task failed
at oracle.as.install.bi.biconfig.standard.OpmnctlTask.doExecute(OpmnctlTask.java:74)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Executing Task: Executing: opmnctl start coreapplication_obis1
Regards,Hi,
Please double check your looback adaptor configuration
The issue has been identified as that for some reason there is a hardcoded machine name mistakenly placed in the Solaris version of OBIEE, which is being sent out to be resolved by DNS. This machine name is an internal oracle machine, and so DNS can not find it.
This has been reported as the following bugs:
Bug 12804924 - OBIEE 11.1.1.5.0 INSTALLATION FAILS IN CONFIG PHASE WHEN STARTING COMPONENTS
Bug 12790815 - AFTER WHAT APPEARS TO BE A GOOD INSTALL CANNOT RESTART ANY OBIEE SERVICES
Solution:
As a workaround, Add the following entry to the end of your hosts file with a dummy IP address (e.g. 127.0.0.1) and then reboot:
127.0.0.1 stafas12.us.oracle.com stafas12
This should prevent timeout while checking DNS to resolve that non-existing address.
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/biee.htm#CACEFIAG
Reference: My oracle Support document
OBIEE 11.1.1.5 Installation On Solaris 64-bit Fails At Starting OPMN Managed Processes [ID 1380777.1]
OBIEE 11g: Error: "failed to start a managed process after the maximum retry limit" OPMN Fails to Start When Installing OBIEE on 64-Bit Operating System [ID 1305993.1]
Thanks
Deva
Edited by: Devarasu on May 18, 2012 10:57 AM -
Planning - Recieving errors during configuration process
Hello,
We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
(Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
(Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
Any thoughts or information would be much appreciated.
Thanks
TonyHi,
What O/S are you installing on?
Is it possible you can try and break down the configuration of planning.
So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
If successful move on to the configure - Deploy to application Server.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error in portal configuration assistant
Hi,
While trying to install Oracle instant portal, I am getting an error during portal configuration assistant step.
ORA-12154 : tns cannot resolve conn ...
What do I need to do in order to fix this error? I see a tnsnames.ora in 2 locations:
{oracle_home}/infra/network/admin
{oracle_home}/portal/network/admin
What is the reason for this error and what needs to be done to fix it.
thanks,
SamitThe services of infrastructure instance must be up before installing Portal or other Middle Tier instances.
-
Itunes 7.6 installation Fatal Error during installation
I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!
I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know! -
Error during sync integrated configuration - incoming payload missed
Hi guys,
we are suing PI 7.11 and trying to use the new feature integrated configuration wherever possible.
Now I test a sync szeanrio where sender is SOAP and receiver is RFC.
The messages fails in SOAP Sender channel with the error that there is no suitable receiver found for this message.
During integrated configuration content based routing is used.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Receiver Determination failed for message e54dba61-9ded-11de-801a-020000000038(OUTBOUND)
But the message fails without persisting the payload, so I could check what value is missing in the receiver rules.
Furthermore the message is only displayed in the sender chanel and is not shown in rwb
While using the normal way of messsage processing where the integration server is involved, such errors are persisted and the payload is also available.
Is that the normal behaviour of integrated configurations.
Could the behaviour be parametrized?
Any help appreciated
Kind regards
JochenHi,
thanks for helping.
Because of integrated configuration the integration server is passed and there is no entry in sxmb_moni.
I already tried this blog, but it doesn´t work for me.
I changed the parameter according to the blog.
But the message content of sync messages are stilled deleted.
Does the parameter changed requires restart of adapter engine or complete java stack?
There two templates one called 'Usage_Type_all_in_One' and above there is an node named equal to the server node name. The parameter of which template have to be changed.
I tried both with out success.
Hopefully you could help me using this feature
Kind regards
Jochen
Maybe you are looking for
-
When I plug my ipod touch into the computer it just charges and won't appear on itunes!
when I plug my ipod touch into the computer it just charges and won't appear on itunes!
-
Voiceover: I need to get rid of it
I am in charge of a lab of 30 iMacs running the latest version of Tiger. Each machine has 5 local accounts. When they were set up, four of the accounts (the student use ones) were locked down from opening any System Preferences. Recently, kids have b
-
Does anyone know of a way to use Address Book with Word? I've looked here and other places and can't seem to find an answer. My guess is know, but I thought I'd ask anyway. Thanks!
-
How to find the unused files for deletion?
After mapping 600 xml files, how does one find the unused files for deletion from the folder? (eaiser and cheaper translations)
-
Page Navigation (history)
I make a web dynpro application with lots of views. I want to put on the top some page navigation which keep the last shown views (the last 5 or 10 shown views), something like page history. Well, I searched at all places for any good step by step tu