Error during generation of the function module..need help urgently
Hello everyone,
m trying to generate data source in BWDevelopment.
After mapping all the BW fields to Source Object elements I click on Generate DataSource(for UD Connect) so following error comes
'An error occurred in step 1 during generation of the function module'
RFC connection is fine, error free and extractor is also fine.
Where could be the problem?
Thanks & Regards,
Priyanka
Hello everybody,
my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
This problem occurs with BW version 3.5 level 17 or below.
Regards,
Priyanka
Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM
Similar Messages
-
When I create an EJB Transport Business Service, after selecting the jar that has the EJB 2.1 artefacts (Remote, Home, etc) the oepe plugin fails and can't continue.
As I understand it seems that there is a problem with the classpath of ant build.xml that oepe creates inside folder /tmp/alsbejbtransport/ to compile the bs and generate the wsdl. I checked if tools.jar is in the classpath (in eclipse) and is included, so I can't figure out wich is the problem.
I found this in Oracle, but not helps solve the problem:
BEA-398120
Error: The WSDL for the typed transport endpoint could not be accessed.
Description
There was a problem retrieving the WSDL from the typed transport service endpoint at the time of service registration
Action
Contact technical support
This is the the full stacktrace that shows eclipse.
Generate : Error during generation of the WSDL:
BUILD FAILED
java.lang.NoClassDefFoundError: com/sun/javadoc/Type
at com.bea.util.jam.provider.JamServiceFactoryImpl.createSourceBuilder(JamServiceFactoryImpl.java:205)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createBuilder(JamServiceFactoryImpl.java:158)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createClassLoader(JamServiceFactoryImpl.java:137)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createService(JamServiceFactoryImpl.java:78)
at weblogic.wsee.util.JamUtil.parseSource(JamUtil.java:152)
at weblogic.wsee.tools.anttasks.JwsLoader.loadJClasses(JwsLoader.java:186)
at weblogic.wsee.tools.anttasks.JwsLoader.load(JwsLoader.java:75)
at weblogic.wsee.tools.anttasks.JwsModule.loadWebServices(JwsModule.java:569)
at weblogic.wsee.tools.anttasks.JwsModule.generate(JwsModule.java:369)
at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:256)
at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:184)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Caused by: java.lang.ClassNotFoundException: com.sun.javadoc.Type
at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1400)
at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1341)
at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:1088)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
... 27 more
Total time: 0 seconds
Eclipse Installation details:
*** System properties:
eclipse.application=org.eclipse.ui.ide.workbench
eclipse.buildId=M20110909-1335
eclipse.commands=-os
linux
-ws
gtk
-arch
x86_64
-showsplash
-launcher
{home}/Development/oepe-indigo/eclipse
-name
Eclipse
--launcher.library
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so
-startup
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher.overrideVmargs
-exitdata
1e418010
-vm
/usr/bin/java
eclipse.home.location=file:{home}/Development/oepe-indigo/
eclipse.launcher={home}/Development/oepe-indigo/eclipse
eclipse.launcher.name=Eclipse
[email protected]/../p2/
eclipse.p2.profile=PlatformProfile
eclipse.product=org.eclipse.platform.ide
eclipse.startTime=1374623921455
eclipse.vm=/usr/bin/java
eclipse.vmargs=-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3
-Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
-Dosb.home={home}/Oracle/Middleware/Oracle_OSB1
-Dosgi.bundlefile.limit=750
-Dosgi.nl=en_US
-Dmiddleware.home={home}/Oracle/Middleware
-jar
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
equinox.use.ds=true
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
guice.disable.misplaced.annotation.check=true
harvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
http.nonProxyHosts=localhost
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
java.class.version=50.0
java.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/endorsed
java.ext.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/ext:/usr/java/packages/lib/ext
java.home=/usr/lib/jvm/jdk1.6.0_45/jre
java.io.tmpdir=/tmp
java.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64/server:/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64:/usr/lib/jvm/jdk1.6.0_45/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
java.protocol.handler.pkgs=null|com.bea.wli.sb.resources.url|com.bea.wli.sb.resources.jca.upgrade.url|weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net|weblogic.net
java.runtime.name=Java(TM) SE Runtime Environment
java.runtime.version=1.6.0_45-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.6
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.6.0_45
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=20.45-b01
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
jna.platform.library.path=/usr/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/lib64:/usr/lib:/lib
line.separator=
middleware.home={home}/Oracle/Middleware
oracle.eclipse.tools.weblogic.ui.isWebLogicServer=true
org.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog
org.eclipse.equinox.launcher.splash.location={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
org.eclipse.equinox.simpleconfigurator.configUrl=file:org.eclipse.equinox.simpleconfigurator/bundles.info
org.eclipse.m2e.log.dir={home}/workspace/pragma/.metadata/.plugins/org.eclipse.m2e.logback.configuration
org.eclipse.update.reconcile=false
org.omg.CORBA.ORBClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.osgi.framework.executionenvironment=OSGi/Minimum-1.0,OSGi/Minimum-1.1,OSGi/Minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,JavaSE-1.6
org.osgi.framework.language=en
org.osgi.framework.os.name=Linux
org.osgi.framework.os.version=3.8.0
org.osgi.framework.processor=x86-64
org.osgi.framework.system.capabilities=osgi.ee; osgi.ee="OSGi/Minimum"; version:List<Version>="1.0, 1.1, 1.2",osgi.ee; osgi.ee="JavaSE"; version:List<Version>="1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6"
org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing,javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
org.osgi.framework.uuid=901615cd-f3f3-0012-11b6-a3bca4d97ac1
org.osgi.framework.vendor=Eclipse
org.osgi.framework.version=1.6.0
org.osgi.supports.framework.extension=true
org.osgi.supports.framework.fragment=true
org.osgi.supports.framework.requirebundle=true
os.arch=amd64
os.name=Linux
os.version=3.8.0-26-generic
osb.home={home}/Oracle/Middleware/Oracle_OSB1
osgi.arch=x86_64
osgi.bundlefile.limit=750
osgi.bundles=reference:file:javax.transaction_1.1.1.v201105210645.jar,reference:file:org.eclipse.equinox.simpleconfigurator_1.0.200.v20110502-1955.jar@1:start
osgi.bundles.defaultStartLevel=4
osgi.bundlestore={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/bundles
osgi.configuration.area=file:{home}/Development/oepe-indigo/configuration/
osgi.framework=file:{home}/Development/oepe-indigo/plugins/org.eclipse.osgi_3.7.1.R37x_v20110808-1106.jar
osgi.framework.extensions=reference:file:javax.transaction_1.1.1.v201105210645.jar
osgi.framework.shape=jar
osgi.framework.version=3.7.1.R37x_v20110808-1106
osgi.frameworkClassPath=., file:{home}/Development/oepe-indigo/plugins/javax.transaction_1.1.1.v201105210645.jar
osgi.install.area=file:{home}/Development/oepe-indigo/
osgi.instance.area=file:{home}/workspace/pragma/
osgi.instance.area.default=file:{home}/workspace/
osgi.logfile={home}/workspace/pragma/.metadata/.log
osgi.manifest.cache={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/manifests
osgi.nl=en_US
osgi.nl.user=en_US
osgi.os=linux
osgi.splashLocation={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
osgi.splashPath=platform:/base/plugins/org.eclipse.platform
osgi.syspath={home}/Development/oepe-indigo/plugins
osgi.tracefile={home}/workspace/pragma/.metadata/trace.log
osgi.ws=gtk
path.separator=:
securerandom.source=file:/dev/./urandom
socksNonProxyHost=localhost
sun.arch.data.model=64
sun.boot.class.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/resources.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/rt.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/sunrsasign.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jsse.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jce.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/charsets.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/modules/jdk.boot.jar:/usr/lib/jvm/jdk1.6.0_45/jre/classes
sun.boot.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64
sun.cpu.endian=little
sun.cpu.isalist=
sun.desktop=gnome
sun.io.unicode.encoding=UnicodeLittle
sun.java.command={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher {home}/Development/oepe-indigo/eclipse -name Eclipse --launcher.library {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so -startup {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.overrideVmargs -exitdata 1e418010 -vm /usr/bin/java -vmargs -Xms256m -Xmx768m -XX:MaxPermSize=512m -Dsun.lang.ClassLoader.allowArraySyntax=true -Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3 -Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester -Dosb.home={home}/Oracle/Middleware/Oracle_OSB1 -Dosgi.bundlefile.limit=750 -Dosgi.nl=en_US -Dmiddleware.home={home}/Oracle/Middleware -jar {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
sun.java.launcher=SUN_STANDARD
sun.jnu.encoding=UTF-8
sun.lang.ClassLoader.allowArraySyntax=true
sun.management.compiler=HotSpot 64-Bit Tiered Compilers
sun.os.patch.level=unknown
svnkit.http.methods=Basic
svnkit.library.gnome-keyring.enabled=false
user.country=AR
user.dir={home}/Development/oepe-indigo
user.home={home}
user.language=es
user.name={username}
user.timezone=America/Argentina/Buenos_Aires
weblogic.home={home}/Oracle/Middleware/wlserver_10.3
Thanks!!run this one in command prompt and then convert the applet using converter tool
JC_HOME = C:\java_card_kit-2_2_2\bin\
set CLASSES=%JCHOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;
D:\NareshPalle\jcardRE\Smart\src>java -classpath %_CLASSES% com.sun.javacard.con
verter.Converter -out EXP JCA CAP -exportpath .\exp -applet 0x0a:0x00:0x00:0x00:0x0e:0x01:0x02:
0x03:0x04:0x05:0x06 PackageName appletName 0x01:0x02:0x03:0x04:0x05:0x0
6:0x07:0x08 1.0
or
go to following directory and run the converter tool in command prompt
step 1: cd C:\java_card_kit-2_2_2\bin\
then run this command under the above directory
step 2:converter -classdir E:\Pathof Your applet class file -out EXP JCA CAP -exportpath E:\path of exp files folder -applet AID PackageName AppletName PackAID major.minor no
For more doubts mail me....
*[removed by moderator]*
Thanks and Regards
NareshPalle
Edited by: EJP on 31/03/2012 20:09: removed your email address. Unless you like spam and unless you think these forums are provided for your personal benefit only, posting an email address here serves no useful purpose whatsoever. -
Automatic number generation using the function module
Hai Everyone,
I have the doubt in automatic number generation.
i find the function module. the function module is
report 123.
*DATA: RC LIKE INRI-RETURNCODE,
NUMBER(10) TYPE C.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING OBJECT = 'HUGO'
NR_RANGE_NR = '01'
IMPORTING RETURNCODE = RC
NUMBER = NUMBER.
CASE RC.
WHEN ' '.
everything o.k.
WHEN '1'.
the assigned number lies in the critical area.
WHEN '2'.
this was the last number, next time the first number
will be assigned
ENDCASE.
write:/ number.
in that function module what i want to give the Exporting Object 'HOGO'. where i want to define the number range. what is meant by 'HOGO'.
If any one faced the same problem plz help me.
Thanks and regards,
P.Naganjana ReddyHai Chandrasekhar,
in that what i have to give. Plz help me in this.
Subobject data element
To-year flag
Number length domain
No interval rolling
Number range transaction
Warning %
Main memory buffering
Group table
Subobject field in group table
Fld NoRangeElement
Fields int./ext. no.range no.
Fld. NoRangeNo
Display element text
Thasnks and regards,
P.Naganjana reddy -
Error during XML inbound via Function Module 'EDI_DATA_INCOMING'
Hi Team,
I am facing below error while trying to upload a inbound XML file via Function Module 'EDI_DATA_INCOMING'.
The control record must begin with <EDI_DC40 segment="1"> instead of
Message no. EA719
Diagnosis
The tag '<EDI_DC40 segment="1">' must be at the start of a control record in XML format, otherwise string '' would be found.
System Response
The file cannot be processed.
Procedure
Correct file DEV_H\SGIDOCI\MSUTEST\00082_ATT..
Please suggest a proper solution for the same. If it is because of wrong structure of XML file then please send me correct XML format for file upload.
Regards,
Amit SharmaHello,
It's the error is SAP code.
Look notes 1616333 and 1535033. Those should fix the error.
BR, Janne -
Error at startup Unable to find DocumentConnectionPool , Need Help urgently
Iam getting an error when iam starting up the server.
trace is :
weblogic.ejb20.WLDeploymentException: Unable to find DocumentConnectionPool 'def
ault' configuration MBeanjavax.ejb.CreateException: Unable to find DocumentConne
ctionPool 'default' configuration MBean
at com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl.ejb
Create(SPIFastDocumentManagerImpl.java:328)
at com.bea.p13n.content.document.internal.SPIFastDocumentManagerImpl_lw3
66m_Impl.ejbCreate(SPIFastDocumentManagerImpl_lw366m_Impl.java:117)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionP
ool.java:151)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManag
er.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:
1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:404)
at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer
.java:983)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:969)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForA
llApplications(SlaveDeployer.java:619)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:376)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:
61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:194)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManag
er.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:
1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:404)
at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer
.java:983)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:969)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForA
llApplications(SlaveDeployer.java:619)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:376)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:
61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
My application-config.xml has :
<DocumentConnectionPool
CapacityIncrement="1"
DriverName="com.bea.p13n.content.document.jdbc.Driver"
InitialCapacity="5"
MaxCapacity="5"
Name="default"
Properties="schemaXML=D:/myServer/dmsBase/doc-schemas;docBase=D:/myServer/dmsBase;jdbc.dataSource=weblogic.jdbc.pool.commercePool"
URL="jdbc:beasys:docmgmt:com.bea.p13n.content.document.ref.RefDocumentProvider"
/>
and my config.xml has:
<Application Deployed="true" Name="MyApp"
Path="D:\apps\MyApp"
StagedTargets="myServer" TwoPhase="true">
<ApplicationConfiguration Name="MyApp"
Targets="myServer" URI="META-INF/application-config.xml"/>
</Application>
So , it is targetted on my server and also the app-config has it defined.
Can anyone tell me where is the problem.?For ne one who is interested,
we figured what went wrong in our configuration.
We are using oracle as backend but driver for the datasource under consideration is given is the driver for reference cloudscape database. Once driver is changed to oracle's OCI driver problem got resolved
Good luck :-)
Manohar -
System_failure error with the function module HTTP_POST
Hi Friends,
While executing the function module "HTTP_POST" ,sometime we are getting the error "System_Failure" exception.
Can anyone tell what could be the reason for this exception,any configurations need to be done on SAP???
For this FM we are passing the RFC destination"SAPHTTPA" as one of the paratmeter and
The two import paramters we are passing to this FM are
URI :
http://10.74.40.31:8686/ArchiveBridge/?informaticaArchive&contRep=IA&sumFile=MYTA_SUMMARY_20090820063258.sum
Destintion : SAPHTTPA
Thanks all in advance.
Regards
DharmarajuHi,
Check if any proxy is maitained in the client by going into transaction
SICF-> Goto-> HTTP Client Proxy -> HTTP LOG TAB.
If there is anything maintained under Host name and port, if yes you need to specify the IP address while calling FM HTTP_POST
under PROXY as
192.168.0.1:8080 where first part is IP address & 2nd part(8080) is port.
Also test connection for SAPHTTPA under SM59 to see if its properly configured.
Regards,
Amit -
There seems to be an error in the function module OPEN_FORM obstructing the
Hi,
There seems to be an error in the function module OPEN_FORM obstructing the process.
Some vendors are not cabaple of usinf EDI and for some reason also not willing to use TTOOL solutions (example Hewlet Packard). In those cases the supplier still would like to get purchase order electronically via e-mail. Sending POu2019s via external mail (SMTP) is basically standard function in R/3 that has been possible since the version 4.5. It is not pre-configured, so (almost) all the required elements needs to be configured.
When we send the output message through ME9F t'code i facing the problem in the above FM.
Please help me how to solve this.
VijayGot you, the digital display for Cupertino and Frankfurt are wrong too.
Submit feedback:
http://www.apple.com/feedback/iphone.html -
Error while using the function module..pack_handling_unit_dlvry
Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.
-
Error while executing the function module BAPI_RE_CN_CREATE
Dear All
I was using the the function module BAPI_RE_CN_CREATE. When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN In the input field TRANS. Requesting you to please kindly suggest.
Regards.
VaraprasadHi Varaprasad,
please try the following.
1. Create a contract manually in the system
2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
Hope that helps.
Regards, Franz -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
Error while using the function module GUI_UPLOAD
Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
record type char255,
end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = p_fname
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_fname
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = gt_string
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hemasee this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop. -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
Getting error in the function module
Hi everybody.
I have created one function module in se37 and i am calling that function module in the se38 report, when i am executing the report it is throwing me an error.
here in my report i am having the select option fields ex matnr, in the function module importing i have given the parameter matnr over there and when i am running the report it is through an error that
"The function module interface allows you to specify only
fields of a particular type under "MATNR".
The field "S_MATNR" specified here is a different
field type "
IF i am giving the parameter instead of select-options in the report and executing, then the function module is getting triggered and receiving the data what ever the code is available in the source code.
can anyone help me out in this issue so that i can get the data while using the select-option instead of parameter.
Thanks in advanceHi,
Actually, I wouldn't recommend the use of that tables parameter...
From sap help:
Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
So i definitely would go with either importing or changing parameter...
Cheers,
m. -
Regarding the function module --error is coming.
Hi All
I am executing function module and i am getting one error after actvating that FM.
Error is - REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
Waiting for the fovarable reply.Hi,
While creating a FM you will be assigned to a Function Group, that Function Group is not active. If function group is not active then only you will be getting this error.
To over come this issue. Please do the below process.
Go to Se80--> Select Function Group from the drop down list --> Select the function group --> Right click on the Function group --> Select activate.
After above process is completed.
Test the Function Module.
Thanks,
Sriram Ponna. -
Initial error occurred during generation of the transformation
HI experts
here i am loading master dat using 7 that ds is in 3.x when i do rt click on the ds it
is asking for the transfer rules to be installed and after that rt click create transformations then "Initial error occurred during generation of the transformation rstran 667" his error is coming
can anybody help me in this
regards
anandHi Anand
May be you have not maintained the infosource.
Create one infosource by using data source in transformation.
Better you migrate to 7.0 data source and try to use.
Update me, still if you had any problems
Regards
Saravanan.ar
Maybe you are looking for
-
MBAM 2.0 fails prereq checks.
I am trying to install MBAM 2 with SCCM integration. I have installed and created the reports database on my sql rs point. I am trying to install the integration and getting the error cannot connect to reporting services point. I have checked and th
-
Smpatch in remote mode RMIERROR
Any thoughts on what am I missing here? I've tried this multiple ways. smpatch analyze runs fine in local mode on all machines I'm testing. I have not seen remote mode work once. (i) First scenario, I enabled wbem to accept remote connections. Then,
-
Has anyone upgraded to lp9 from lp7.2..
Has anyone tried to upgrade from lp 7.2 to lp 9 yet?....did u need the dongle in to do the upgrade or the xskey serial number?...im plannin on getting a new macbook pro laptop and i have lp7.2...i dont want to reinstall lp 7.2 then install lp9..how w
-
Aperture 3 Library size vs iPhoto Library
Hi! I recently switched from iPhoto to Aperture and am wondering about the library size? In iPhoto the library size was bloated because it made a copy of every photo behind the scenes upon import. I got tired of that and thought that moving to Ape
-
How to transfer SRM PO Condition Type and Custom fields to ECC?
Hi All, I have a scenario to transfer SRM Line item condition types and few custom fields to ECC. I have found the following things but structure 'CI_EKPODB' does not exists in ECC. I am using 'SRM 5.00' and 'SAP ECC 6.0'. NOTE: I have to transfer c