Error during Opening Layout on PDF Forms - SFP

Hi All,
I am trying to develop a PDF Form and I have succcessfully created interface and when i try to create a form, upon pressing the LAYOUT Tab or Button i get an error message and the trnasaction closes down
Error Details are:
==================================================================================
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
===============================================================================
I check with the guys who do the SAP GUI installation and he did all he can do with no success. My GUI is 710 version with Patch level 7
Can anyone help me in identifying what I should be doing to have Layout opened in my system?
Thanks in advance to all of you,
Rgds,
Lakshmi

Seems to be GUI installation issue and will try re-installing required things.
Rgds,
Lakshmi

Similar Messages

Error during Opening Layout on PDF Forms

Hi All,
I am trying to develop a PDF Form and I have succcessfully created interface and when i try to create a form, upon pressing the LAYOUT Tab or Button i get an error message and the trnasaction closes down
Error Details are:
==================================================================================
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
===============================================================================
I check with the guys who do the SAP GUI installation and he did all he can do with no success. My GUI is 710 version with Patch level 7
Can anyone help me in identifying what I should be doing to have Layout opened in my system?
Thanks in advance to all of you,
Rgds,
Lakshmi

Please follow these steps.
1) uninstall all adobe related stuff
2) uninstall sap gui also
3) again install sap gui
4) Then install all adobe related stuff like ALDsetup.exe, xACF_NW04_SP21.exe
5) Just open the formdesigner.exe from Designer 7.1 folder from your desktop
6) Then go to T-code SFP and try to open the layout, it will work fine.
Take the help of basis if required.

I have ADOBE X reader installed in my systems. When I wanted to open an online pdf form, Mozilla puts up a error message and the form does not open.

When I try to open a online pdf form, I get a error message to close the reader and try it again. Sometimes, the message does not come but what I see is just a BLACK screen in Mozilla.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Design mode troubles - "Error during component layout."

Hi all.
Since this is getting pretty annoying, I thought someone might know the right solution to this. Whenever I try to open Design mode on my AIR app (Spark + MX), I get:
Design mode: Error during component layout. Choose Design > Refresh to refresh design mode.    MyTestApp.mxml    /MyTestApp/src    Unknown    Problem
The MXML code for it is as simple as it can get:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                            xmlns:s="library://ns.adobe.com/flex/spark"
                            xmlns:mx="library://ns.adobe.com/flex/mx"
                            skinClass="spark.skins.spark.SparkChromeWindowedApplicationSkin"
                            >
</s:WindowedApplication>
And app descriptor XML only contains transparent set to true and systemChrome to none, even tho it shouldn't make any difference in the Design view anyway. Refresh doesn't solve the error, and sometimes the Design view itself goes into infinite loop of refreshing.
However, if I remove the skinClass, it all works fine and Design view loads (but then I don't get the window chrome on run-time). Same goes if I declare the skin within <fx:Style /> tag, it only breaks when using skinClass attribute in the WindowedApplication declaration. And the same thing happens if I try to edit some of the Spark skins in the Design view.
I've tried creating a new project, switching workspaces, building a blank workspace, switching from Flex SDK 4.1 to 4.0 - all to no avail, the same error always occurs and it never goes away.
Any ideas?

Instead of declaring the skin within the WindowedApplication tag, you have to call the Skin class from a Style tag right after you close your window tag:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
Xmlns:mx="library://ns.adobe.com/flex/mx"
title="YOUR APP">
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
s|WindowedApplication
skinClass:ClassReference("spark.skins.spark.SparkChromeWindowedApplicationSkin");
background-color:#999999;
background-alpha:"0.7";
</fx:Style>
source: http://help.adobe.com/en_US/air/build/air_buildingapps.pdf

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI

When opening in filled PDF form, the data flashes and then blanks. Adobe Reader XI
I filled in this form with important data. And saved it. I have since opened it and printed it again. Now when I open it the fields become blank I can see them for a split second as it clears them.
I believe I have updated to Reader XI since I filled it in.

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

Design mode: Error during component layout. Choose Design Refresh to refresh design mode.

Description Resource Path Location Type
Design mode: Error during component layout. Choose Design > Refresh to refresh design mode. etPlayer.mxml /etPlayer/src Unknown Problem
Refreshing wont work..
any ideas?

Some elements can cause the design view to break, it recently happened to me and this was my solution.
I began by commenting out most of the visual elements from code and going back and forth to design view to try and get it working.
Finally I narrowed it down to the "ToggleButtonBar" component. After I commented this line out the design view was up and running.
This might not be the solution but it will get you back up and running.

RFBILA00 - Error during opening of file

Hello everyone!
Can someone provide me some help regarding a error message when executing RFBILA00: the message is very strange due to the fact that I have another system an I can write to my c:/temp directory the extract to consolidation. It goes like this: Error during opening of file c:\temp\EXTRACT_CS_CO.txt
I've also check all the costumizing between the two systems and they are equal.
Thanks in advanced,
David Resende

Deat Paulo,
Thank you for your fast response!
Could it be that the path indicated in the unix configuration isn't valid? I've check this over and over and I don't see any difference between the two systems I have. One works and the other don't!
I've check the customizing via transaction FILE, and everything is equal. Should I contact the systems administration to verify the existence of the unix path, or can I do it myself?
Best regards,
David

Lockbox-Error during opening of file C:\temp\142941

When I execute the transaction :FLB2, I always meet the error message "Error during opening of file C:\temp\142941". Could anyone please tell me why it happens? Many thanks!

Hi Christina,
I have experienced the same problem. When we run FLB2, the system creates a file and stores it somewhere. Via program RFBIDE00 the system tries to open the file. It probably has to do with the fact that you have several application servers but only one is installed as central instance.
What in fact happens, is that the file is written to the application server on which you are logged on to on that moment but when the program RFBIDE00 is running it looksup the file on the central instance server.
I have logged a OSS message for this.
Kind Regards,
Joep
[email protected]

Error While selecting Layout option in tcode SFP

Hi
I am getting the below error when i select the layout option in tcode SFP.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
How to resolve this error?
Regards,
Abdul Hakim

Hi Hakim,
See the sap note below:
Symptom
Presentation CD 1 "SAP GUI for Windows 6.40" Compilation 3 references this note for additional components.
For information about where to find the successive version of the installation component
"Forms Design Tool" - "Adobe Forms Designer"
refer to Note 962763.
Reason and Prerequisites
This note describes two possible installation procedures:
Direct installation on the workstation
Update installation server (for administrators)
Solution
Direct installation on the workstation
Product: "SAP Interactive Forms" - "Adobe LiveCycle Designer"
              Start "ALDsetup. exe" directly on your workstation. If you had already installed an older version of "Adobe Designer 6.0" using "SAP GUI" or "SAP NetWeaver Development Studio", you first need to delete the older "Forms Design Tool" version in the corresponding installation.
Update installation server:
If you have integrated an SAP GUI installation server with
6.40 Compilation 3
6.40 Compilation 2
6.20 Compilation 6
you can add the following product:
Product: "SAP Interactive Forms" - "Adobe LiveCycle Designer":
              To do this, start the program
              "..\setup\ALDtoGUIServer.exe"
              and specify the network path for an existing SAP GUI installation server. After this procedure, you can see the new "Interactive Forms" component in the component selection dialog box of the SAP GUI installation when you attach a new installation package with SAPAdmin. The installation on the workstation is then started as usual using "setup.exe" or "netsetup.exe".
Caution:
Some files on your existing installation server may still be write-protected (read-only).
Make sure that all files in the two directories
"...\Adobe\"
"...\Common Files\"
are not write-protected.
To do this, open a DOS box (input request) and switch to the directory of the installation server and set
attrib -r /s "Common Files\*.*"
attrib -r /s "Adobe\*.*"
before you start "..\setup\ALDtoGUIServer.exe".
Otherwise, you may receive the following error message:
"... .cab cannot be extracted. It may be corrupt."
Regards,
Md Ziauddin

ATMLIB.dll error on opening a complex PDF

I have designed several forms with Javascript code sections for auto-date completion etc.
In the last 2-3 weeks I cannot open any of them on my development machine.
Here is a screenshot of the error message.
http://i.imgur.com/LejE4oO.jpg
The program then freezes and has to be shut down.
The error says "not designed to run on Windows". That does not make sense to me.
I am running Windows 7 Ultimate 64-BIT.
I have done the following:
1) Uninstalled ACROBAT X PRO
Rebooted
Used Adobe's clean tool
2) Reinstalled
ERROR still exists
1) Uninstalled ACROBAT X
2) Installed every Acrobat X update up to the latest version in correct sequence
3) Reboot
ERROR still exists
I have now gotten to the point where my workflow has come to a complete halt. I take my work to another compute (client) that has Acrobat Reader and the "complex" files open just fine.
Its just my dev machine that is FUBAR.
I have been through like 10 reinstalls with no success.
My only solution now may be to ditch Adobe and seek a third party PDF creation and editing tool for work which is far from ideal.
I am NOT reinstalling Windows 7 because I am in no mood to have to reinstall every piece of software plus risk breaking my VB.net coding tools.
Has anyone seen an ATMLIB.dll error on opening complex documents?
This is not AMTLIB.dll (I don't know what that is) but ATMLIB.dll.
ATM appears to stand for Adobe Type Manager but I cannot seem to figure out why this has occured.

I was able to fix this, and I posted about it on another forum post here
I had this issue ("Bad Image: C:\Windows\system32\ATMLIB.dll is either not designed to run on Windows or it contains an error") with Adobe Reader X (10.1.12). I tried repairing, and then tried uninstalling and upgrading to Adobe Reader XI (11.0.9), but still had the same trouble. I compared the atmlib.dll files in both directories and noticed that the file in C:\Windows\SysWOW64 did not appear to have any file meta data (giving the appearance that it was corrupted), whereas the file in C:\Windows\system32 reflected a file version 5.1.2.238 and product version "5.1 Build 238". Now, it appears based on being installed to "C:\Program Files (x86)" that the version of Adobe Reader I was using was 32-bit. So, this tells me that while the error references the C:\Windows\system32 file path, it is likely actually the file in C:\Windows\SysWOW64 that is the problem (Windows-on-Windows emulation for 32-bit applications, 32-bit libraries actually reside in C:\Windows\SysWOW64, not C:\Windows\system32). I found the same file in C:\Windows\SysWOW64 with the same product and file version on another 64-bit Windows 7 workstation, and simply copied it to C:\Windows\SysWOW64 on the affected workstation, and that resolved the issue.
NOTE: To overwrite the file, I had to change file ownership to Administrators security group, otherwise it was immutable.

About layout in pdf form

Hi all,
I am creating a pdf form but i have getting a error message when i am saving the changes in layout with message id no. FPUIFB051(Changes to layout cannot be saved in display mode).
what will i do to save the changes.
Thanks in advance.
Sanket.

good..
that means u r in display mode...
click on change icon...
then do changes and save it...
reward if it helps..
regards,
Omkar.

Error while Open and save pdf using Adobe library

I m using adobe library to open and save PDF using VC++ MFC .
as given samples are working for me all are using console application to accomplish this task.
But when i tried to use same functions to open and save PDF from DOC/VIEW application it gives me an error.
it is a strange problem that I don't understand. If I compile the following code (Visual C++ 2000 Express Edition) I get an error message: "Unhandled exception at 0x0041183f in test.exe: 0xC0000005: Access violation reading location 0x00000004."
For your reference when I simply create one function and one menu and called that function from menu.
Please see the code is given below.
The code is given below
void CPDF_MFCDoc::OnPdfOpen()
    // TODO: Add your command handler code here
    OpenPDF();
#define PDF_FNAME1 "C:/Test.pdf"
void OpenPDF()
     PDDoc pdDoc= NULL;
     ASErrorCode errCode = 0;
     DURING
        pdDoc1 = MyPDDocOpen(PDF_FNAME1);
    HANDLER
        errCode = ERRORCODE;
    END_HANDLER
It gives me an error as.
Unhandled exception at 0x004075b1 in PDF_MFC.exe: 0xC0000005: Access violation reading location 0x00000024.
But when same thing I was complied from console ,it works.
Working code is given below.
#define PDF_FNAME1 "C:/Test.pdf"
void MainProc(int argc, char **argv )
     PDDoc pdDoc= NULL,
     ASErrorCode errCode = 0;
     DURING
             pdDoc1 = MyPDDocOpen(PDF_FNAME1);
     HANDLER
        errCode = ERRORCODE;
    END_HANDLER
PDDoc MyPDDocOpen(char *fileName)
    ASFileSys asFileSys = ASGetDefaultFileSys();
    volatile ASPathName asPathName    = NULL;
    volatile PDDoc        pdDoc        = NULL;
    DURING
        /* Create asPathName from file.*/
        #if MAC_PLATFORM
        asPathName = GetMacPath(fileName);
        #else
        asPathName = ASFileSysCreatePathName(asFileSys, ASAtomFromString("Cstring"), fileName, 0);
        #endif
        /* Open pdDoc from asPathName.*/
        pdDoc = PDDocOpen(asPathName, NULL, NULL, true);
        fprintf(stdout, "Successfully opened %s\n", fileName);
    HANDLER
        fprintf(stderr, "Unable to open %s\n", fileName);
        pdDoc = NULL;
    END_HANDLER
    /* Release asPathName.*/
    if (asPathName)
        ASFileSysReleasePath(asFileSys, asPathName);
    return pdDoc;

Yes ,I have it , I think when i tried to open or save any document "ASGetDefaultFileSys()" function not able to get file it raise an error , can you please help me out . where I m wrong.
Why this "ASGetDefaultFileSys()" function raise as "Access violation error" .
Please help me.

How do i get fdf data to open in my pdf form

I created a fillable pdf form for one of my employers to fill in terminated employees then email back to me. I have two or three problems. First, when i receive the email back I have the fdf attachment with the form, when I try to open it, I get a message about "trusting the form" I've always selected "always trust this form' as it comes from the same person each time but Acrobat Pro X doesn't save my selection to trust. Next problem, I also get a message that I need to browse and find a pdf form to open for the fdf data to display. Why doesn't the most recent opened form for the fdf data appear in my most recent documents list?
If anyone can help I sure would appreciate it, it's very annoying to have to go through these steps everytime I get a form back.
Mike

The FDF would normally have a reference to the form from which it was exported, usually with a specific path. Because it can't be found on your system, you're prompted to locate a form to import the FDF into. If you open the blank form that is on your system separately, it should appear in the most recent list.
So I'd suggest this workflow instead:
1. Download and save the FDF from the email.
2. Open the blank form.
3. Import the FDF into the blank form.

Open a Closed PDF Form

I'm creating a PDF form and after I save and close it in edit mode I can't reopen it to make more edits. How can you set the rights when the pdf is open to be able to later open it to make additional changes?

No, it just opens up as a pdf fillable form, but I can't edit the fields? I changed the Security to "No Security" so I could make changes, but when I closed it and opened it back up the security says I can't make eidts.

Error during Opening Layout on PDF Forms - SFP

Similar Messages

Maybe you are looking for