Error during return order creation in CRM online
Hi all,
When I create return order via transaction CIC0 with reference to standard order ( B2C ) then some times system gives error after saving the return order. The text of the error message is very confusing , It says"
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
<i><u>"Transmission log
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Document xxxxxxxxxx doesn't have document category but (Notification E V2 068)
Sales document xxxxxxxxxx was not changed (Notification E V4 219)"</u></i>
I have tried to replicate this return order with all the available tools but during save this message is coming from R/3.
Regards,
I would suggest you to try to create a return order in R3 system (from where the error is coming) with the same parameters.
Usually that should give you the same error... Resolve the issue, then try to create order in CRM online. Now error should not be there.
Regards,
Kaushal
Similar Messages
-
BADI for return order creation in CRM
Hi group,
I have an requirement. In CRM ,Return order should be created from UBB service contract when change process takes place(Contract termination), ie throgh actions in the UBB service contract. these steps are configured through Actions.
The requirement is, I need to enhance the BADI implemention(COPY_DOCUMENT) by creating a function module. this function module should provide the necessary data for Return Order creation. Is there any function module to create a Return order in CRM or how to proceed? Appreciate if any suggestions
Regards,
SankarHi,
You can use BAPI_SALESORDER_CREATEFROMDAT2 .
In import TESTRUN = X
Description
This parameter is a test switch.
If you activate the switch, the system does not save the document.
Value range
Space = Document should be saved
X = Document should not be saved
Default
Space -
Inactivate the cash discount condition type during return order creation.
Hi All,
I have created a Pricing procedure its having a condition type Cash Discount.
The client requirment is during the return order creation system should inactivate the cash discount condition type.
Please sugget me what to do to fulfill this requirment.
Thanks in advance.
Regards
Vankat.Hi
You can achieve through creating new pricing procedure for Return process
Otherwise try with user exit
MV45AFZZ USEREXIT_SAVE_DOCUMENT_PREPARE
Maintain access Sequence with Document type and maintain condition record , so at the time of return order system wont pick that material
Regards,
Prasanna
Edited by: prasanna_sap on Feb 9, 2012 3:31 PM -
Reg:error during transfer order creation
hi,
after quality inspection i move the stock into warehouse integrated storage location. if i clear inspection lot in qa32 for a material after saving it will pop up express message"error during creation of transfer order for a material".i configured that after qc inspection automatic TR is created.i just proceed with manual.
its a issue related with workflow or configuration....i checked with automatic TO all the things are deactivated.....where i am missing
Thanks
Muthuraman.Dhi,
goto VOV8
choose your sales order type
transaction flow - variant (remove the transaction variant if any)
but this will remove the transaction variant(custom) which you created , it will take the standard variant for your transaction VA01
regards
senya -
Hi experts,
When i am creating return order the partners not copied from the billing document also iam unable to create delivery document it gives error saying Error during partn : partner role SH. order cannot be delivered.can any one throw some light on this.
Thanks in advance
SanjayThe following could be reasons for this error:
- If this is a common error for many return documents, then it could be a customizing issue:
1. Incorrect config of Partner Determination procedure for the Returns Order where partner function SH has not been defined (as Sadhu has mentioned above)
2. Incorrect copying routine from Billing to Return Order in tx VTAF (again as Sadhu has mentioned)
- If this is only a one time error occurring only for this Invoice, then problem could be with Master Data etc:
1. Ship-to party has deletion flag
2. Returns order has a different Sales Area as compared to the Invoice -
Error during Production Order creation
Hi All,
Our's is MTO scenario. We have maintiain Account Assigment Category as 'M' in Requirement Type. During creation on production order with ref to sales order system gives error "Account assignment cannot be carried out because of different origin no."
If I create the production order with ref to quotation system does not gives any error. But my requirement is to create the prod order with ref to sales order.
Please guide
RegardsdHi Bala,
In SPRO goto>Sales and Distribution> Basic Functions-->
Availability Check and Transfer of Requirements
-->
Transfer of Requirements
-->
Define Requirements Classes
Define Requirements Types
--> Determination Of Requirement Types Using Transaction
Determination Of Requirement Types Using Transaction
In the standard system, requirements types are determined according to a specific search strategy beginning with the material strategy group.
Strategy for Determining the Requirements Type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Note
You can select an alternative search strategy in the 'Source' field, for example a transaction-related procedure for determining requirements type (source = 1 or 2).
Example
There are business transactions, such as consignment stock processing, in which the material with its planning characteristics is not important, rather the transaction itself. An issue from the customer's consignment stock should not trigger an availability check against planning at the plant as layed down by the planning strategy but rather against special stock.
Actions
1. Assign the item categories and MRP type to the requirements types.
2. Select an alternative search strategy in the 'Source' field if necessary.
By assigning the 1 or 2 to the Source you can have the requirements in MD04 refered to order instead of the initial source document which is usually quotation. If we don't assign this then the system by default refers to the initail document created i.e. Inquiry or Quotation whichever is the first document.
Regards,
Karthik. -
Error during prdn order creation co01
Dear All,
During creation of production order by co01 a error message is generating i.e."13.05.2035 comes after end of factory calender" for some of my Fert materials only in one of my plants.Bom & Routings,Workcenters are valid for this FG & also for Sfg's which exists in as components in this fert material.At the time of availability check the system generates this error.Factory calender is valid for 2010 but if the error is due to validity of factory calender the system should generate error for all the Fert materials which we are producing in same plant which is not happening actually.The problem is for only a few of Fert materilas.Pls help suitable answer will be awarded with points.
Regards
R SehgalHi Rakesh,
The problem i think should be in ur lead time for those materials for which the error is occuring.
See ur factory calender is valid up to 2010 but for some materials because of the order quantity and the lead time from routing its going beyond the 2010 ( means that order is getting scheduled beyond the2010) so it is giving the error.
Pls check the same and revert.
Regards,
Vinayak. -
Error during process order creation
while i create a process order following error is coming "recipe is empty"
please tell me where exactly i'm going wrong.Dear Dhaval,
Welcome Back
Long time heard from you and nice to see your reply from long time
Good Luck !!!
Regards
Madhu -
Error during Service Order creation
Hi,
I configure the Maintanance order for the plant and tried to create the Service ordeer for that Plant.
But system shows the Following Error Massage,
Field 'Additional Device Data' must still be filled
Can anybody guide me to proceed further on this
Thank You,
With Best Regards,
M.SureshHi,
Thanks for your info PETEA.
Sorry Paul Meehan , I didn't see the field settings in OIAN properly last time.
There is a setting exist for field 'Additional data' as Mandatory. I removed this setting and tried to release the order and I succeeded.
Thanks Paul Meehan and PETEA for your Information.
M.Suresh -
Error during purchase order creation
Hello friends;
System gives following error when i adopt already created purchase requsition.
"system error in routine F1_TAX_CHK_PRICING_DATA error code 13 function builder TAX 2."
Please help to solve this error.
Thanks in advance!!Dear,
If you have access to OSS notes then please see:
400766 Changes in accounting interface and 112609 How are tax codes transferred to condition
Please check with FICO person.
TAX Procedure for the countrry for which ur working should be properly maintained inside OBQ3,
Regards,
R.Brahmankar -
Update error in RV_SALES_DOCUMENT_ADD during Sales order creation
I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
ChitraYes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
Analysis of error shows:
Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
Fails in the Read table in one of the form
Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman -
Dump during sales order creation for a config material (uding order BOM)
Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
YogeshYogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM -
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Return Order creation referanace to billing document.
Hi , Experts,
I have one issue regarding return process , Pls do the needful ASAP.
My question : I have created one direct sales order , After thet i have created PGI & billing , But after created billing document , I want to take return taht goods, So i had created return for same sales order quantity, & also created credit memo. But my problem is, that system allow me futher create return sales order with referance to billing document no. At a return order creation time system only give warning message - (There are already returns for item 000010: 2 EA)
& allow to save return document no. But i want to erroe message after take return all billing quantity. Can any body suggest me, what is the customizing require for this,
Thanks a lot in advance.
Regards;
HappyHi, abdul sir,
Here no any error message, My problem is that , why all line item comes in delivery, B'cause i had already deliver 5 line item out of 10 item, Here system take delivered line item with 0 quantity, I don't want that delivered line item at a time in delivery,
Regards:
Happy -
Hi, Expert,,
My issue:
1 ) I had create sales order for 2 Quantity.
2 I had completed PGI for 2 Quantity
3 ) I had complleted billing for this 2 Quantity,
But after billing customer want to return,
then
1 ) I had created return order with references to billing no - for 2 Quantity
2 ) I had completed PGR.- for 2 Quantity
3 ) I had created credit memo for - for 2 Quantity
But by mistake user - created two times return process for that billing document no,
User receive worning message at a time return order creation - is There are already returns for item 000010: 2 EA
But i want to set error message if user create more quantity return order wrt to billing no.
Can anybody send me it's solution ASAP,
Thanks a lot in advance
Regards:
HappyHi ..
Since user is creating returns with reference to billing doc , he will not be able to create more quantity than in billing doc.
if he try's it will give error message , since in your case there was already a return order excist that why the erro message displayed an order already excist.
Hope it helps
jinoy
Maybe you are looking for
-
Does anyone know how to make a Windows 7 PC into a Wifi Hotspot?
I have a Windows 7 PC at work and have tried using the Ad-Hoc option to turn my wifi card in my laptop with Internet Connection Sharing to get my iPad, iPhone and MacBook Air online but I have had no sucess. Googled everything I could and still can'
-
TS2481 iTunes was unable to load data class information from Sync Services
itouch will not synch. Message is: iTunes was unable to load data class information from Sync Services. Reconnect or try again later. Any solution to this. Each time I reconnnect, same thing happens.
-
I had an issue with the default oracle job to analyze the database. I opened a metalink ticket and they said there is a known bug in 10.1.0.3 with the default oracle job and it does not work. I am not allowed allowed to update. so the work around was
-
Problem in external table & sql*loader
hi all i want to transter data between flat file to oracle database through external table option and sql*loader Utility. 1. how u make .dat file in external table. 2. how u make .ctl file in sql*loader utility. if u know any good site plz. tell me.
-
HI, I did not understand the follwing steps.. can anybody explain me... My apps version is 11.5.10.2 RDBMS 9i Check the value of LD_LIBRARY_PATH. # This patch will relink reports60 binaries. # Reports has both link-time and run-time dependency with l