Error editing rowset query
I'm getting an error when I try to edit the rowset. If I try to add another table to the rowset, then right click on the table, the "get data from" section hangs on "refreshing data providers.."
If I change the rowset back to its default, I am able once again to see the data providers in the drop down menu. I am using jdbc driver version 3.1.12 and I'm using MySQL 5.0
I have also tried using the "com.mysql.jdbc.Driver" drive class and "org.gjt.mm.mysql.Driver" and neither help
Here is the log from creator2:
INFORMATIONAL *********** Exception occurred ************ at 11:20 PM on Feb 20, 2006
javax.faces.el.PropertyNotFoundException: java.lang.RuntimeException: java.sql.SQLException: Invalid column display size. Cannot be less than zero
at com.sun.rave.web.ui.faces.DataProviderPropertyResolver$ValueData.getValue(DataProviderPropertyResolver.java:341)
at com.sun.rave.web.ui.faces.DataProviderPropertyResolver.getValue(DataProviderPropertyResolver.java:143)
at com.sun.jsfcl.data.ResultSetPropertyResolver.getValue(ResultSetPropertyResolver.java:63)
at com.sun.rave.jsfsupp.container.DesignTimePropertyResolver.getValue(DesignTimePropertyResolver.java:79)
at com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:167)
at com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:151)
at com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:243)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:178)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:159)
at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
at com.sun.rave.web.ui.renderer.ValueHolderDesignTimeRenderer.encodeBegin(ValueHolderDesignTimeRenderer.java:57)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
at com.sun.rave.web.ui.util.RenderingUtilities.renderComponent(RenderingUtilities.java:78)
at com.sun.rave.web.ui.renderer.TableColumnRenderer.encodeChildren(TableColumnRenderer.java:173)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
at com.sun.rave.web.ui.util.RenderingUtilities.renderComponent(RenderingUtilities.java:80)
at com.sun.rave.web.ui.renderer.TableRowGroupRenderer.encodeChildren(TableRowGroupRenderer.java:185)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
at com.sun.rave.web.ui.util.RenderingUtilities.renderComponent(RenderingUtilities.java:80)
at com.sun.rave.web.ui.renderer.TableRenderer.encodeChildren(TableRenderer.java:157)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1224)
at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1417)
at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1257)
at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1417)
at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1257)
at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1417)
at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1257)
at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1417)
at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1257)
at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:1034)
at com.sun.rave.css2.FacesSupport.renderHtml(FacesSupport.java:578)
at com.sun.rave.designer.WebForm.getHtmlDom(WebForm.java:422)
at com.sun.rave.designer.WebForm.getBody(WebForm.java:497)
at com.sun.rave.designer.DesignerPaneUI.modelChanged(DesignerPaneUI.java:563)
at com.sun.rave.designer.DesignerActions.refresh(DesignerActions.java:919)
at com.sun.rave.designer.DesignerActions.refresh(DesignerActions.java:939)
at com.sun.rave.designer.DesignerActions.refreshFolder(DesignerActions.java:954)
at com.sun.rave.designer.DesignerActions.refreshAll(DesignerActions.java:932)
at com.sun.rave.designer.RefreshServiceProvider.refresh(RefreshServiceProvider.java:47)
at com.sun.rave.dataconnectivity.datasource.ProjectDataSourceTracker.refreshDesignerForDataSources(ProjectDataSourceTracker.java:147)
at com.sun.rave.dataconnectivity.ui.ModifyDataSourceDialog$1.actionPerformed(ModifyDataSourceDialog.java:202)
at org.netbeans.core.windows.services.NbPresenter$ButtonListener.actionPerformed(NbPresenter.java:1064)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:515)
at java.awt.Dialog.show(Dialog.java:536)
at org.netbeans.core.windows.services.NbPresenter.superShow(NbPresenter.java:800)
at org.netbeans.core.windows.services.NbPresenter.doShow(NbPresenter.java:843)
at org.netbeans.core.windows.services.NbPresenter.run(NbPresenter.java:831)
at org.openide.util.Mutex$1.run(Mutex.java:1058)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.RuntimeException: java.sql.SQLException: Invalid column display size. Cannot be less than zero
at com.sun.data.provider.impl.CachedRowSetDataProvider.getMetaData(CachedRowSetDataProvider.java:1319)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKeys(CachedRowSetDataProvider.java:489)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKeyInternal(CachedRowSetDataProvider.java:467)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKey(CachedRowSetDataProvider.java:439)
at com.sun.data.provider.impl.TableRowDataProvider.getFieldKey(TableRowDataProvider.java:113)
at com.sun.rave.web.ui.faces.DataProviderPropertyResolver$ValueData.getValue(DataProviderPropertyResolver.java:327)
... 77 more
Caused by: java.sql.SQLException: Invalid column display size. Cannot be less than zero
at javax.sql.rowset.RowSetMetaDataImpl.setColumnDisplaySize(RowSetMetaDataImpl.java:267)
at com.sun.sql.rowset.CachedRowSetXImpl.initMetaData(CachedRowSetXImpl.java:871)
at com.sun.sql.rowset.CachedRowSetXImpl.getMetaData(CachedRowSetXImpl.java:2336)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getMetaData(CachedRowSetDataProvider.java:1317)
[catch] ... 82 more
[rave.dataconnectivity] Error occurred when trying to retrieve table information: com.mysql.jdbc.NotImplemented: Feature not implemented
*********** Exception occurred ************ at 11:27 PM on Feb 20, 2006
java.lang.NullPointerException
at com.sun.sql.rowset.RowSetMetaDataXImpl.getColumnClassName(RowSetMetaDataXImpl.java:74)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getType(CachedRowSetDataProvider.java:522)
[catch] at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.loadState(TableRowGroupDesignState.java:180)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel.initialize(TableCustomizerMainPanel.java:103)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel.<init>(TableCustomizerMainPanel.java:87)
at com.sun.rave.web.ui.component.customizers.TableCustomizer.getCustomizerPanel(TableCustomizer.java:39)
at com.sun.rave.insync.CustomizerDisplayer.show(CustomizerDisplayer.java:81)
at com.sun.rave.insync.ResultHandler.handleResult(ResultHandler.java:165)
at com.sun.rave.designer.DesignerUtils$MenuActionListener.actionPerformed(DesignerUtils.java:1096)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
*********** Exception occurred ************ at 11:27 PM on Feb 20, 2006
java.lang.NullPointerException
at com.sun.sql.rowset.RowSetMetaDataXImpl.getColumnClassName(RowSetMetaDataXImpl.java:74)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getType(CachedRowSetDataProvider.java:522)
at com.sun.rave.web.ui.component.table.TableDataProviderDesignState.initialize(TableDataProviderDesignState.java:205)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel$1.run(TableCustomizerMainPanel.java:193)
[catch] at java.lang.Thread.run(Thread.java:595)
*********** Exception occurred ************ at 11:27 PM on Feb 20, 2006
java.lang.NullPointerException
at com.sun.sql.rowset.RowSetMetaDataXImpl.getColumnClassName(RowSetMetaDataXImpl.java:74)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getType(CachedRowSetDataProvider.java:522)
[catch] at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.loadState(TableRowGroupDesignState.java:180)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel.initialize(TableCustomizerMainPanel.java:103)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel.<init>(TableCustomizerMainPanel.java:87)
at com.sun.rave.web.ui.component.customizers.TableCustomizer.getCustomizerPanel(TableCustomizer.java:39)
at com.sun.rave.insync.CustomizerDisplayer.show(CustomizerDisplayer.java:81)
at com.sun.rave.insync.ResultHandler.handleResult(ResultHandler.java:165)
at com.sun.rave.designer.DesignerUtils$MenuActionListener.actionPerformed(DesignerUtils.java:1096)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
*********** Exception occurred ************ at 11:27 PM on Feb 20, 2006
java.lang.NullPointerException
at com.sun.sql.rowset.RowSetMetaDataXImpl.getColumnClassName(RowSetMetaDataXImpl.java:74)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getType(CachedRowSetDataProvider.java:522)
at com.sun.rave.web.ui.component.table.TableDataProviderDesignState.initialize(TableDataProviderDesignState.java:205)
at com.sun.rave.web.ui.component.table.TableCustomizerMainPanel$1.run(TableCustomizerMainPanel.java:193)
[catch] at java.lang.Thread.run(Thread.java:595)
Hello,
I had the same error message with Java Studio Creator2 Update1 on Linux FC3, database= PostgreSQL 8.1, JDBC driver= postgresql-8.1-405.jdbc2ee.jar(while binding a rowset:right-click, bind to data).
I am running the InsertUpdateDelete tutorial sample.
Here is the output:
java.lang.NullPointerException
at com.sun.sql.rowset.RowSetMetaDataXImpl.getColumnClassName(RowSetMetaDataXImpl.java:74)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getType(CachedRowSetDataProvider.java:522)
at com.sun.rave.web.ui.component.table.TableDataProviderDesignState.initialize(TableDataProviderDesignState.java:190)
at com.sun.rave.web.ui.component.table.TableBindToDataPanel.initialize(TableBindToDataPanel.java:97)
at com.sun.rave.web.ui.component.table.TableBindToDataPanel.<init>(TableBindToDataPanel.java:64)
at com.sun.rave.web.ui.component.customizers.TableBindToDataCustomizer.getCustomizerPanel(TableBindToDataCustomizer.java:39)
at com.sun.rave.insync.CustomizerDisplayer.show(CustomizerDisplayer.java:81)
at com.sun.rave.insync.ResultHandler.handleResult(ResultHandler.java:165)
at com.sun.rave.designer.DesignerUtils$MenuActionListener.actionPerformed(DesignerUtils.java:1096)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892) at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
[catch] at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149) at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
GoloJ
Similar Messages
-
Editing RowSet Query - Premature Parsing
While attempting to edit a RowSet query, after appending WHERE to the query, I tried to stretch the table window in the upper most pane by grabbing its bottom right corner (so I could see some other column names). At this time a Parse Error dialog popped up. After dismissing the Parse Error dialog, the table window in the upper most pane disappeared and my mouse pointer image remained that of the diagonal arrows, which it picked up from trying to stretch the window. This is repeatable.
Hi,
I tried to work on your problem.
I suggest you to complete the SQL statement before getting off the Query Editor.
The query editor does not understand what to display
if the SQL statement is incomplete.
Regards.,
Sharath. -
Validate and Edit SQL Query Errors
I am trying to "Validate or Edit SQL Query" in APEX 3.0. When I open up the SQL Query its highlighted in red and when I click on the Validate or Edit button it gives me an error.
I modified my marvel.conf file to include:
AddType text/xml xbl
AddType text/x-component htc
and this still didnt take care of it. Any ideas and thank you in advance.
PS: OPS - Windows Server 2003
Upgraded from 1.6 to 3.0I've gotten so used to command line editing, that I rarely us "ed". back in the days of DOS, the default editor was EDLIN - one of those goofy editors that only showed one line at a time, so it wasn't much of an improvement. you could switch to the old dos editor, but that wasn't much better (just checked, it's still there)
some nice things with command line editing
to change everthing between the first two single quotes
c/'...'/'new criteria'to remove everything after a specific string
c/from.../fromto change a string that contains (or will contain) slashes
c.1/2.1/4. -
SCCM 2012 R2 CU2 Can't Edit WMI Query Code in Report Builder
I first posted this in the SCCM but the issue is not solved so I thought I'd try here in the SQL Reporting forum. Original thread here: http://social.technet.microsoft.com/Forums/en-US/b0a6ca3d-7471-4b49-8447-7403a65c2ec0/sccm-2012-r2-cu2-cant-edit-wmi-query-code-in-sccm-reports?forum=configmanagergeneral
I'll repost info here to make this easier.....
I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy has
been helping me a lot but we've gotten nowhere. I can run a report. I can open one in edit mode after it prompts me for credentials. It loads Report Builder 3.0. But when I go to a dataset/query, enter credentials, and try to open it, I get a popup that
says "Unable to connect to data source. 'AutoGen_5C6358F2_yayak..." When I click on details it says "The target principal name is incorrect. A connection was succesfully established with the server, but then an error occurred during the login
process. (SSL Provider, error: 0 -The target principal name is incorrect.)" In SQL Reporting Services Config Manager the paths for Web Service URL is
http://ip.ip.ip.ip:80/ReportServer_SC01 and for Report Manager URL:
http://ip.ip.ip.ip:80/Reports_SC01. A domain account is used to login. This happens when you r-click a dataset and select query to edit the code of a dataset, ie, when query designer tries to open up. It happens
in both Admin Console and when using the Report Manager URL within SQL SSRS. All other functions of using edit mode of a report work fine.
Ben JohnsonWYWhen I do that, browse is dimmed out.
But, if I deselect "create a data set" and click "choose an existing dataset in this report..." there is no data connection at the end.
But if I don't use report builder and instead use IE to browse to my ConfigMgr_ABC, I do see the connection at the end: {123...}.
This problem is on a network that is not on the 'net, so it's hard to do screen shots, so I'll reproduce this problem step by step:
I pick a report to edit, it doesn't matter which one.
If I try it in Admin Console, I right-click, Edit the report, it asks me for a login, I login, then I get a popup that says "Cannot continue. The application is improperly formatted. Contact the vendor for assistance. I click the Details button and
get a long set of text but the key part is "Your web browser settings do not allow you to run signed applications." This msg didn't appear before, so something changed, so I will investigate. I think it used to give a SPN error.
If I use IE within report builder and navigate to whatever report, click open, everything works, except, when I click on Dataset0 (the key one I normally need to edit), click query, it prompts me for a login and no matter which one I use, i get a popup that
says "unable to connect to data source 'AutoGen_123...'". If I click details I get "the targe principal name is incorrect. A connection was successfully established with the server, but then an error occurred during the login process. (provider:
SSL Provider 0-The target principal name is incorrect.)
Ben JohnsonWY -
I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Error while running query in BI Answer
Hi All,
I am getting this error while executing a query in BI Answer.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1114, message: ORA-01114: IO error writing block to file %s (block # %s) at OCI call OCIStmtExecute
Do anyone have any idea about this error. The query was running and i was able to see the output but suddenly it throws this error.
Awaiting for response.
Thanks
AshokIts an Oracle database error, possibly caused because your file system has filled up, or because the disk device is no longer available. Possibly caused by a Sort operation on your query causing the TEMP segment to auto extend and fill up the filesystem, but I'm guessing at the last bit.
You need to contact your DBA to investigate further.
Edited by: Matt T on Dec 16, 2008 10:38 AM -
Error while executing query in OLAP server
Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puruPurushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM -
Re: BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns
Hello Everyone.
I've run into something quite strange and am hoping you can help me.
I am using Apex 4.0.1 and Oracle version 10.2.0.5. I've created a "classical" report in which the underlying SQL is a very simple:
select * from pvtabThe Oracle table pvtab consists of 419 columns, all of which are varchar2(88) and number type. That's it.
When I run the report, al of the columns show up as expected.
However, when I go into the "Report Attributes" tab and click on one of the fields (any of them, it doesn't matter which one), I immediately get the following error:
ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "598CAA7B68746A66F4B99E1512C36DED" application checksum = "0"If if replace the "*" with a few actual column names, then I am able to access any of these columns without problem.
If I put back the "*", I then encounter this error again.
I have never seen this error with other SQL SELECT statements in which I use the "*" qualifier to retrieve all columns from the table.
And so, I am wondering if the error is caused because of the large number of columns (419) in my table.
I've seen this same error mentioned in connection with forms but never with a report.
So, is there some limit to the number of columns one can have in a "classic" or interactive report?
Any idea why I would be getting this error?
Here is the DDL for my table pvtab:
CREATE TABLE "PVTAB"
( "MICRO" VARCHAR2(4),
"PRIM" VARCHAR2(4),
"UNIT" NUMBER,
"SEC_REF_1" NUMBER,
"SECN_1" VARCHAR2(88),
"SEC_REF_2" NUMBER,
"SECN_2" VARCHAR2(88),
"SEC_REF_3" NUMBER,
"SECN_3" VARCHAR2(88),
"SEC_REF_4" NUMBER,
"SECN_4" VARCHAR2(88),
"SEC_REF_5" NUMBER,
"SECN_5" VARCHAR2(88),
"SEC_REF_6" NUMBER,
"SECN_6" VARCHAR2(88),
"SEC_REF_7" NUMBER,
"SECN_7" VARCHAR2(88),
"SEC_REF_8" NUMBER,
"SECN_8" VARCHAR2(88),
"SEC_REF_9" NUMBER,
"SECN_9" VARCHAR2(88),
"SEC_REF_10" NUMBER,
"SECN_10" VARCHAR2(88),
"SEC_REF_11" NUMBER,
"SECN_11" VARCHAR2(88),
"SEC_REF_12" NUMBER,
"SECN_12" VARCHAR2(88),
"SEC_REF_13" NUMBER,
"SECN_13" VARCHAR2(88),
"SEC_REF_14" NUMBER,
"SECN_14" VARCHAR2(88),
"SEC_REF_15" NUMBER,
"SECN_15" VARCHAR2(88),
"SEC_REF_16" NUMBER,
"SECN_16" VARCHAR2(88),
"SEC_REF_17" NUMBER,
"SECN_17" VARCHAR2(88),
"SEC_REF_18" NUMBER,
"SECN_18" VARCHAR2(88),
"SEC_REF_19" NUMBER,
"SECN_19" VARCHAR2(88),
"SEC_REF_20" NUMBER,
"SECN_20" VARCHAR2(88),
"SEC_REF_21" NUMBER,
"SECN_21" VARCHAR2(88),
"SEC_REF_22" NUMBER,
"SECN_22" VARCHAR2(88),
"SEC_REF_23" NUMBER,
"SECN_23" VARCHAR2(88),
"SEC_REF_24" NUMBER,
"SECN_24" VARCHAR2(88),
"SEC_REF_25" NUMBER,
"SECN_25" VARCHAR2(88),
"SEC_REF_26" NUMBER,
"SECN_26" VARCHAR2(88),
"SEC_REF_27" NUMBER,
"SECN_27" VARCHAR2(88),
"SEC_REF_28" NUMBER,
"SECN_28" VARCHAR2(88),
"SEC_REF_29" NUMBER,
"SECN_29" VARCHAR2(88),
"SEC_REF_30" NUMBER,
"SECN_30" VARCHAR2(88),
"SEC_REF_31" NUMBER,
"SECN_31" VARCHAR2(88),
"SEC_REF_32" NUMBER,
"SECN_32" VARCHAR2(88),
"SEC_REF_33" NUMBER,
"SECN_33" VARCHAR2(88),
"SEC_REF_34" NUMBER,
"SECN_34" VARCHAR2(88),
"SEC_REF_35" NUMBER,
"SECN_35" VARCHAR2(88),
"SEC_REF_36" NUMBER,
"SECN_36" VARCHAR2(88),
"SEC_REF_37" NUMBER,
"SECN_37" VARCHAR2(88),
"SEC_REF_38" NUMBER,
"SECN_38" VARCHAR2(88),
"SEC_REF_39" NUMBER,
"SECN_39" VARCHAR2(88),
"SEC_REF_40" NUMBER,
"SECN_40" VARCHAR2(88),
"SEC_REF_41" NUMBER,
"SECN_41" VARCHAR2(88),
"SEC_REF_42" NUMBER,
"SECN_42" VARCHAR2(88),
"SEC_REF_43" NUMBER,
"SECN_43" VARCHAR2(88),
"SEC_REF_44" NUMBER,
"SECN_44" VARCHAR2(88),
"SEC_REF_45" NUMBER,
"SECN_45" VARCHAR2(88),
"SEC_REF_46" NUMBER,
"SECN_46" VARCHAR2(88),
"SEC_REF_47" NUMBER,
"SECN_47" VARCHAR2(88),
"SEC_REF_48" NUMBER,
"SECN_48" VARCHAR2(88),
"SEC_REF_49" NUMBER,
"SECN_49" VARCHAR2(88),
"SEC_REF_50" NUMBER,
"SECN_50" VARCHAR2(88),
"SEC_REF_51" NUMBER,
"SECN_51" VARCHAR2(88),
"SEC_REF_52" NUMBER,
"SECN_52" VARCHAR2(88),
"SEC_REF_53" NUMBER,
"SECN_53" VARCHAR2(88),
"SEC_REF_54" NUMBER,
"SECN_54" VARCHAR2(88),
"SEC_REF_55" NUMBER,
"SECN_55" VARCHAR2(88),
"SEC_REF_56" NUMBER,
"SECN_56" VARCHAR2(88),
"SEC_REF_57" NUMBER,
"SECN_57" VARCHAR2(88),
"SEC_REF_58" NUMBER,
"SECN_58" VARCHAR2(88),
"SEC_REF_59" NUMBER,
"SECN_59" VARCHAR2(88),
"SEC_REF_60" NUMBER,
"SECN_60" VARCHAR2(88),
"SEC_REF_61" NUMBER,
"SECN_61" VARCHAR2(88),
"SEC_REF_62" NUMBER,
"SECN_62" VARCHAR2(88),
"SEC_REF_63" NUMBER,
"SECN_63" VARCHAR2(88),
"SEC_REF_64" NUMBER,
"SECN_64" VARCHAR2(88),
"SEC_REF_65" NUMBER,
"SECN_65" VARCHAR2(88),
"SEC_REF_66" NUMBER,
"SECN_66" VARCHAR2(88),
"SEC_REF_67" NUMBER,
"SECN_67" VARCHAR2(88),
"SEC_REF_68" NUMBER,
"SECN_68" VARCHAR2(88),
"SEC_REF_69" NUMBER,
"SECN_69" VARCHAR2(88),
"SEC_REF_70" NUMBER,
"SECN_70" VARCHAR2(88),
"SEC_REF_71" NUMBER,
"SECN_71" VARCHAR2(88),
"SEC_REF_72" NUMBER,
"SECN_72" VARCHAR2(88),
"SEC_REF_73" NUMBER,
"SECN_73" VARCHAR2(88),
"SEC_REF_74" NUMBER,
"SECN_74" VARCHAR2(88),
"SEC_REF_75" NUMBER,
"SECN_75" VARCHAR2(88),
"SEC_REF_76" NUMBER,
"SECN_76" VARCHAR2(88),
"SEC_REF_77" NUMBER,
"SECN_77" VARCHAR2(88),
"SEC_REF_78" NUMBER,
"SECN_78" VARCHAR2(88),
"SEC_REF_79" NUMBER,
"SECN_79" VARCHAR2(88),
"SEC_REF_80" NUMBER,
"SECN_80" VARCHAR2(88),
"SEC_REF_81" NUMBER,
"SECN_81" VARCHAR2(88),
"SEC_REF_82" NUMBER,
"SECN_82" VARCHAR2(88),
"SEC_REF_83" NUMBER,
"SECN_83" VARCHAR2(88),
"SEC_REF_84" NUMBER,
"SECN_84" VARCHAR2(88),
"SEC_REF_85" NUMBER,
"SECN_85" VARCHAR2(88),
"SEC_REF_86" NUMBER,
"SECN_86" VARCHAR2(88),
"SEC_REF_87" NUMBER,
"SECN_87" VARCHAR2(88),
"SEC_REF_88" NUMBER,
"SECN_88" VARCHAR2(88),
"SEC_REF_89" NUMBER,
"SECN_89" VARCHAR2(88),
"SEC_REF_90" NUMBER,
"SECN_90" VARCHAR2(88),
"SEC_REF_91" NUMBER,
"SECN_91" VARCHAR2(88),
"SEC_REF_92" NUMBER,
"SECN_92" VARCHAR2(88),
"SEC_REF_93" NUMBER,
"SECN_93" VARCHAR2(88),
"SEC_REF_94" NUMBER,
"SECN_94" VARCHAR2(88),
"SEC_REF_95" NUMBER,
"SECN_95" VARCHAR2(88),
"SEC_REF_96" NUMBER,
"SECN_96" VARCHAR2(88),
"SEC_REF_97" NUMBER,
"SECN_97" VARCHAR2(88),
"SEC_REF_98" NUMBER,
"SECN_98" VARCHAR2(88),
"SEC_REF_99" NUMBER,
"SECN_99" VARCHAR2(88),
"SEC_REF_100" NUMBER,
"SECN_100" VARCHAR2(88),
"SEC_REF_101" NUMBER,
"SECN_101" VARCHAR2(88),
"SEC_REF_102" NUMBER,
"SECN_102" VARCHAR2(88),
"SEC_REF_103" NUMBER,
"SECN_103" VARCHAR2(88),
"SEC_REF_104" NUMBER,
"SECN_104" VARCHAR2(88),
"SEC_REF_105" NUMBER,
"SECN_105" VARCHAR2(88),
"SEC_REF_106" NUMBER,
"SECN_106" VARCHAR2(88),
"SEC_REF_107" NUMBER,
"SECN_107" VARCHAR2(88),
"SEC_REF_108" NUMBER,
"SECN_108" VARCHAR2(88),
"SEC_REF_109" NUMBER,
"SECN_109" VARCHAR2(88),
"SEC_REF_110" NUMBER,
"SECN_110" VARCHAR2(88),
"SEC_REF_111" NUMBER,
"SECN_111" VARCHAR2(88),
"SEC_REF_112" NUMBER,
"SECN_112" VARCHAR2(88),
"SEC_REF_113" NUMBER,
"SECN_113" VARCHAR2(88),
"SEC_REF_114" NUMBER,
"SECN_114" VARCHAR2(88),
"SEC_REF_115" NUMBER,
"SECN_115" VARCHAR2(88),
"SEC_REF_116" NUMBER,
"SECN_116" VARCHAR2(88),
"SEC_REF_117" NUMBER,
"SECN_117" VARCHAR2(88),
"SEC_REF_118" NUMBER,
"SECN_118" VARCHAR2(88),
"SEC_REF_119" NUMBER,
"SECN_119" VARCHAR2(88),
"SEC_REF_120" NUMBER,
"SECN_120" VARCHAR2(88),
"SEC_REF_121" NUMBER,
"SECN_121" VARCHAR2(88),
"SEC_REF_122" NUMBER,
"SECN_122" VARCHAR2(88),
"SEC_REF_123" NUMBER,
"SECN_123" VARCHAR2(88),
"SEC_REF_124" NUMBER,
"SECN_124" VARCHAR2(88),
"SEC_REF_125" NUMBER,
"SECN_125" VARCHAR2(88),
"SEC_REF_126" NUMBER,
"SECN_126" VARCHAR2(88),
"SEC_REF_127" NUMBER,
"SECN_127" VARCHAR2(88),
"SEC_REF_128" NUMBER,
"SECN_128" VARCHAR2(88),
"SEC_REF_129" NUMBER,
"SECN_129" VARCHAR2(88),
"SEC_REF_130" NUMBER,
"SECN_130" VARCHAR2(88),
"SEC_REF_131" NUMBER,
"SECN_131" VARCHAR2(88),
"SEC_REF_132" NUMBER,
"SECN_132" VARCHAR2(88),
"SEC_REF_133" NUMBER,
"SECN_133" VARCHAR2(88),
"SEC_REF_134" NUMBER,
"SECN_134" VARCHAR2(88),
"SEC_REF_135" NUMBER,
"SECN_135" VARCHAR2(88),
"SEC_REF_136" NUMBER,
"SECN_136" VARCHAR2(88),
"SEC_REF_137" NUMBER,
"SECN_137" VARCHAR2(88),
"SEC_REF_138" NUMBER,
"SECN_138" VARCHAR2(88),
"SEC_REF_139" NUMBER,
"SECN_139" VARCHAR2(88),
"SEC_REF_140" NUMBER,
"SECN_140" VARCHAR2(88),
"SEC_REF_141" NUMBER,
"SECN_141" VARCHAR2(88),
"SEC_REF_142" NUMBER,
"SECN_142" VARCHAR2(88),
"SEC_REF_143" NUMBER,
"SECN_143" VARCHAR2(88),
"SEC_REF_144" NUMBER,
"SECN_144" VARCHAR2(88),
"SEC_REF_145" NUMBER,
"SECN_145" VARCHAR2(88),
"SEC_REF_146" NUMBER,
"SECN_146" VARCHAR2(88),
"SEC_REF_147" NUMBER,
"SECN_147" VARCHAR2(88),
"SEC_REF_148" NUMBER,
"SECN_148" VARCHAR2(88),
"SEC_REF_149" NUMBER,
"SECN_149" VARCHAR2(88),
"SEC_REF_150" NUMBER,
"SECN_150" VARCHAR2(88),
"SEC_REF_151" NUMBER,
"SECN_151" VARCHAR2(88),
"SEC_REF_152" NUMBER,
"SECN_152" VARCHAR2(88),
"SEC_REF_153" NUMBER,
"SECN_153" VARCHAR2(88),
"SEC_REF_154" NUMBER,
"SECN_154" VARCHAR2(88),
"SEC_REF_155" NUMBER,
"SECN_155" VARCHAR2(88),
"SEC_REF_156" NUMBER,
"SECN_156" VARCHAR2(88),
"SEC_REF_157" NUMBER,
"SECN_157" VARCHAR2(88),
"SEC_REF_158" NUMBER,
"SECN_158" VARCHAR2(88),
"SEC_REF_159" NUMBER,
"SECN_159" VARCHAR2(88),
"SEC_REF_160" NUMBER,
"SECN_160" VARCHAR2(88),
"SEC_REF_161" NUMBER,
"SECN_161" VARCHAR2(88),
"SEC_REF_162" NUMBER,
"SECN_162" VARCHAR2(88),
"SEC_REF_163" NUMBER,
"SECN_163" VARCHAR2(88),
"SEC_REF_164" NUMBER,
"SECN_164" VARCHAR2(88),
"SEC_REF_165" NUMBER,
"SECN_165" VARCHAR2(88),
"SEC_REF_166" NUMBER,
"SECN_166" VARCHAR2(88),
"SEC_REF_167" NUMBER,
"SECN_167" VARCHAR2(88),
"SEC_REF_168" NUMBER,
"SECN_168" VARCHAR2(88),
"SEC_REF_169" NUMBER,
"SECN_169" VARCHAR2(88),
"SEC_REF_170" NUMBER,
"SECN_170" VARCHAR2(88),
"SEC_REF_171" NUMBER,
"SECN_171" VARCHAR2(88),
"SEC_REF_172" NUMBER,
"SECN_172" VARCHAR2(88),
"SEC_REF_173" NUMBER,
"SECN_173" VARCHAR2(88),
"SEC_REF_174" NUMBER,
"SECN_174" VARCHAR2(88),
"SEC_REF_175" NUMBER,
"SECN_175" VARCHAR2(88),
"SEC_REF_176" NUMBER,
"SECN_176" VARCHAR2(88),
"SEC_REF_177" NUMBER,
"SECN_177" VARCHAR2(88),
"SEC_REF_178" NUMBER,
"SECN_178" VARCHAR2(88),
"SEC_REF_179" NUMBER,
"SECN_179" VARCHAR2(88),
"SEC_REF_180" NUMBER,
"SECN_180" VARCHAR2(88),
"SEC_REF_181" NUMBER,
"SECN_181" VARCHAR2(88),
"SEC_REF_182" NUMBER,
"SECN_182" VARCHAR2(88),
"SEC_REF_183" NUMBER,
"SECN_183" VARCHAR2(88),
"SEC_REF_184" NUMBER,
"SECN_184" VARCHAR2(88),
"SEC_REF_185" NUMBER,
"SECN_185" VARCHAR2(88),
"SEC_REF_186" NUMBER,
"SECN_186" VARCHAR2(88),
"SEC_REF_187" NUMBER,
"SECN_187" VARCHAR2(88),
"SEC_REF_188" NUMBER,
"SECN_188" VARCHAR2(88),
"SEC_REF_189" NUMBER,
"SECN_189" VARCHAR2(88),
"SEC_REF_190" NUMBER,
"SECN_190" VARCHAR2(88),
"SEC_REF_191" NUMBER,
"SECN_191" VARCHAR2(88),
"SEC_REF_192" NUMBER,
"SECN_192" VARCHAR2(88),
"SEC_REF_193" NUMBER,
"SECN_193" VARCHAR2(88),
"SEC_REF_194" NUMBER,
"SECN_194" VARCHAR2(88),
"SEC_REF_195" NUMBER,
"SECN_195" VARCHAR2(88),
"SEC_REF_196" NUMBER,
"SECN_196" VARCHAR2(88),
"SEC_REF_197" NUMBER,
"SECN_197" VARCHAR2(88),
"SEC_REF_198" NUMBER,
"SECN_198" VARCHAR2(88),
"SEC_REF_199" NUMBER,
"SECN_199" VARCHAR2(88),
"SEC_REF_200" NUMBER,
"SECN_200" VARCHAR2(88),
"SEC_REF_201" NUMBER,
"SECN_201" VARCHAR2(88),
"SEC_REF_202" NUMBER,
"SECN_202" VARCHAR2(88),
"SEC_REF_203" NUMBER,
"SECN_203" VARCHAR2(88),
"SEC_REF_204" NUMBER,
"SECN_204" VARCHAR2(88),
"SEC_REF_205" NUMBER,
"SECN_205" VARCHAR2(88),
"SEC_REF_206" NUMBER,
"SECN_206" VARCHAR2(88),
"SEC_REF_207" NUMBER,
"SECN_207" VARCHAR2(88),
"SEC_REF_208" NUMBER,
"SECN_208" VARCHAR2(88)
);Thank you for any help/advice.
Elie
Edited by: EEG on Jun 12, 2011 2:09 PMSo, is there some limit to the number of columns one can have in a "classic" or interactive report?Yes. See Oracle® Application Express Application Builder User's Guide Release 4.0, Appendix B: Oracle Application Express Limits.
Any idea why I would be getting this error?No, but I've replicated it in APEX 4.0.2.00.07 on 11.2.0.1.0 EE using a table of 420 <tt>varchar2(88)</tt> columns:
>
ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "50C9BDC0AA1AEF0EB272E9158B2117B4" application checksum = "0"
>
Happens whether using <tt>select *</tt> or including all column names in the query. (I know you don't want to type all the column names, but I'd never use <tt>select *</tt> in a production application: always use a proper column list. You can get one without typing by drag-and-drop of a table in most IDEs, or a query from <tt>user_tab_columns</tt>.)
I hit the problem at 274 columns. Such an arbitrary number leads me to think that the problem is not one of the number of columns per se, but is due to some other limit (possibly a 32K VARCHAR2/RAW buffer somewhere).
Workaround:
Updates to the report column attributes are actually being saved, and you can navigate them using the Page Definition tree view as described in Appendix B.
Getting More Help:
This is probably a bug. If you have a support agreement with Oracle raise an SR with Oracle Support.
Also:
<li>Search the forum using the "ORA-20503" code and other possible terms to see if there's anything relevant. I had a quick look but the only thread in this context recommended an upgrade on an Oracle 9 DB version that's not compatible with APEX 4.0.
<li>To get the attention of the Oracle APEX team or anyone else who may know more about this problem than we do, edit your original post and change the Subject to be more specific about the actual nature of the problem: <em>BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns</em>, and include your database version/edition and the definition of the <tt>PVTAB</tt> table.
Finally:
Somebody's bound to ask, so we might as well get started:
<li>Why so many columns?
<li>What requirement is this trying to fulfil? -
Error while copy query between infocubes
I was trying to copy a query between infocubes and ended with error message.
Query copied from Infocube A to Infocube B. Infocube B has an additional dimension with 2 char's when compared to infocube A.
Using transaction RSZC, I tried to copy the query, but ended up with following error..
1.Program error in class COPY_QRY_TO_CUBE method : UNCAUGHT_EXCEPTION
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.The system tried to insert a data record, even though a data record with the same primary key already exists
I also tried using function module RSZ_I_COPY_QRY_TO_CUBE, which was of no help. I get the following message with the function module...
1. Program error in class RS_TESTFRAME_CALL method : UNCAUGHT_EXCEPTION
2. An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3. The system tried to insert a data record, even though a data record with the same primary key already exists
I have also tried a solution in BW expert by using debugging mode of the above function module, again this was of no help..
I am BI 7.0 SP09...
Any ideas, Please....
Thanks,
RR
Message was edited by:
Ray RHello,
Are you trying to copy Business Content delivered Queries?
I had also got this error when copying over all queries from one cube to another. Reason for this message was plain simple - I did not realise that the sender Cube had Business Content Query which we cannot copy over using RSZC as system tries to create another query with suffix as 0****_1. We cannot create query in SAP user namespace. Error message is different then the reason behind it.
Thanks
Ravi -
Cannot Edit Universe Query in Crystal Reports.
Hi,
We have Crystal Reports 2008 SP5 installed on a Terminal Server where our report developers can go to develop reports. We have a 4 node BOXI R2 SP4 cluster on the opposite side of a firewall, and have opened the firewall ports so that Crystal Reports can connect to this BOXI cluster and a universe on that cluster, and the developers can publish their reports.
For some developers, and the issue is intermittent for them, if they open one of those Crystal Reports to edit the universe query, they go into Database Expert and right click and choose Edit query, nothing happens. The Query Editor window does not open. They don't get any errors, other than the Universe Query editor window refuses to open. No errors on the BOXI server side either.
They can work for a few days and everything works fine, when suddenly this behavior starts. When they report the issue to me and I try it myself, it works fine. I've checked their access rights repeatedly and have even given a user temporary full admin rights to rule out any rights issues, but they stll get this behavior.Just as strange, the problem suddenly will disappear. Often, they will send me an message several hours or days later stating that everything is OK again and they can edit their universe queries in the same reports that refused to work earlier.
I've also checked the BOXI cluster nodes to see if possibly one of the services had a missing -requestport setting, and was choosing a random port that the firewall could be blocking, but everything looks fine. If I login to the BOXI cluster servers and try one of the reports, I can edit the query just fine.
Any suggestions? I'm at my wits end.
Edited by: Perry Provst on Nov 11, 2010 9:18 PMI had the same issue and it was because the Universe is having Oracle as Database and I dont have any Oracle drivers installed on my machine. Once i have installed Oracle drivers i was able to view/edit the query panel.
Hope this would help you. -
Why there is a error in this query ?
why there is a error in this query ?
declare
v_exist pls_integer;
v_search varchar2(255) := '175';
v_sql varchar2(255);
begin
for s in
(select table_name, column_name
from user_tab_columns
where data_type like '%CHAR%'
order by table_name, column_name)
loop
v_sql := 'select count(*) from '||s.table_name||
' where instr('||s.column_name||',' || CHR(39)|| v_search|| CHR(39) ||') > 0';
execute immediate v_sql into v_exist;
if v_exist > 0 then
dbms_output.put_line(s.table_name||'.'||s.column_name||' matches the string.');
end if;
end loop;
end;
Error:
The following error has occurred:
ORA-00933: SQL command not properly ended
ORA-06512: at line 14
Edited by: user575089 on Dec 23, 2009 4:14 AM
Edited by: user575089 on Dec 23, 2009 4:14 AMSee, Right now i am in schema and see below :
set serveroutput on;
declare
v_exist pls_integer;
v_search varchar2(255) := 'SCOTT';
v_sql varchar2(255);
begin
for s in
(select '"'||table_name||'"' table_name,'"'||column_name||'"' column_name
from user_tab_columns
where data_type like '%CHAR%'
and table_name not like '%$%'
order by table_name, column_name)
loop
v_sql := 'select count(*) from '||s.table_name||' where instr('||s.column_name||',' || CHR(39)|| v_search|| CHR(39)||') > 0';
--dbms_output.put_line(v_sql);
--execute immediate v_sql;
execute immediate v_sql into v_exist;
if v_exist > 0 then
dbms_output.put_line(s.table_name||'.'||s.column_name||' matches the string.');
end if;
end loop;
end;
"EMP"."ENAME" matches the string.
"EXCEPTIONS"."OWNER" matches the string.
"FLOW_TABLE"."OBJECT_OWNER" matches the string.
"MYEMP"."ENAME" matches the string.
PL/SQL procedure successfully completed.
I am getting output; that i search "SCOTT" word in my search string. -
Can't able to edit the query in query designner
Hello every one,
Please help me in below issue. It is really important.
Actually i have create the query in the BI- Development and that i pass to the production.
Now. I tried to again edit the same query in the development , and for that i have create a new request . after creating the requesting i again logged in to the BEx query designner , but still i can not able to edit the query..
i have create the request in the correct manner. So, what will i do now? Please help me in this.HI Gaurav,
Again i create a request by below steps
->open the ADW by RSA1
->go to Transport connection
->go to query element - > select my query -> select all necessary query element -> and then click on the truck symbol (i have not create BEx request)
and then i create the request
then i open the query in the designer and again i can not able to edit the query
error is same
-> BEx transport request is not available or not suitable
-> choose an existing request
Now,tell me what can i do? this is really an issue for me and help me to solve..Please all other can also give there comments
one more thing i want to add is , i have also check the object changabilty , there the query element and all related to query are "not changable". Is this an issue.
Edited by: james macwan on Oct 16, 2008 8:39 AM -
SCCM 2012 R2 CU2 Can't Edit WMI Query Code in SCCM Reports
I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy has
been helping me a lot but we've gotten nowhere. I can run a report. I can open one in edit mode after it prompts me for credentials. It loads Report Builder 3.0. But when I go to a dataset/query, enter credentials, and try to open it, I get a popup that
says "Unable to connect to data source. 'AutoGen_5C6358F2_yayak..." When I click on details it says "The target principal name is incorrect. A connection was succesfully established with the server, but then an error occurred during the login
process. (SSL Provider, error: 0 -The target principal name is incorrect.)" In SQL Reporting Services Config Manager the paths for Web Service URL is
http://ip.ip.ip.ip:80/ReportServer_SC01 and for Report Manager URL:
http://ip.ip.ip.ip:80/Reports_SC01.
This is one of three problems I'm having a lot of difficulty with on this network. I'm making separate threads for all three.
Ben JohnsonWYWhen I do that, browse is dimmed out.
But, if I deselect "create a data set" and click "choose an existing dataset in this report..." there is no data connection at the end.
But if I don't use report builder and instead use IE to browse to my ConfigMgr_ABC, I do see the connection at the end: {123...}.
This problem is on a network that is not on the 'net, so it's hard to do screen shots, so I'll reproduce this problem step by step:
I pick a report to edit, it doesn't matter which one.
If I try it in Admin Console, I right-click, Edit the report, it asks me for a login, I login, then I get a popup that says "Cannot continue. The application is improperly formatted. Contact the vendor for assistance. I click the Details button and
get a long set of text but the key part is "Your web browser settings do not allow you to run signed applications." This msg didn't appear before, so something changed, so I will investigate. I think it used to give a SPN error.
If I use IE within report builder and navigate to whatever report, click open, everything works, except, when I click on Dataset0 (the key one I normally need to edit), click query, it prompts me for a login and no matter which one I use, i get a popup that
says "unable to connect to data source 'AutoGen_123...'". If I click details I get "the targe principal name is incorrect. A connection was successfully established with the server, but then an error occurred during the login process. (provider:
SSL Provider 0-The target principal name is incorrect.)
Ben JohnsonWY -
Edit sql query in Database Fields Command
Is there any way to edit the query that is specified in the DatabaseFields > Command dinamically from java? If so, how would I do that? I need to edit/append its "where" clause.
I have been googling the topic for several days, and have found nothing.
Please help!Hi,
Tried that too. No luck. Gives me this.
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'selectUsingIn' failed due to: Pure SQL Exception.
Pure SQL Execute of select interface_id, property_name, property_value from ( (?) ) failed.
Caused by java.sql.SQLSyntaxErrorException: ORA-00903: invalid table name
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Regards,
Neeraj Sehgal -
Error in LIME Query-Authorization object C_Lime_Loc cannot be checked..
hi,
I am very new to SAP Basis. i am facing the subject mentioned error in one of the user in a client when i run MM03 T.code.Su53 is showing Successful.
Temporaily ,I have provided the user with Profile SAP_ALL along with roles specified for the user and things are working fine.
i have tried assigning this object to all the Roles in the user but still in vain. Request some guidance to resolve this problem and thus removing the SAP_ALL profile to the concern user.Thanks in advance.
Edited by: Selva kannan on May 5, 2008 2:13 PMHi,
Heartly thanks for your feedback.
Actally the error reads: Error in Lime Query:Authrization object C_Lime_Loc cannot be checked.
SU53 is displaying last authorization is successful.
i have already added the object C_LIME_Loc to all the roles and checked the T.code MM03 without SAP_ALL profile.but failed.
I had compared the t.code su24 output in the user once with SAP_ALL profile and once without SAP_ALL and found both has same(identical) checked value. need help as i can feel that there is some authrization in SAP_ALL which is missing in my roles. how do i detect this....how do i check the objects in SAP_ALL related to this error.
Maybe you are looking for
-
I have a complex 2 hour video with thousands of transitions, etc. that I've been working on for 7 months in FCE 3. If I upgrade to 3.5, will the project have to be re-rendered after I open it? Thanks, Fay.
-
V.Urgent: EPM Version 11.1.2.0 Installation Issues
Hi, I am installing EPM Version 11.1.2.0 in my laptop, selected only FOundation Services to install first. The install Progress stop at 99% with the below Error and it is not moving further ERROR in Console as : " Creating Oracle Inventory, the proce
-
Acid2 Test - Vista Yes, XP No . . . Hmmm . . .
Interesting. The Acid2 Test works in Safari with Windows Vista, but has problems in Safari with Windows XP. Until I saw the Acid2 Test in Safari with Windows Vista, Acid2 only rendered 100% corrrect with Opera. http://www.webstandards.org/files/acid2
-
hi there.candy crush not loading on my mac.been playing with it via facebook.flash player is updated.please help thank you
-
Post relates to: Tungsten T2