Error encountered while polling the resource for the service endpoint

Hello everyone
I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
I created a new OSB project, create a new Proxy service to connect to my FTP server:
- service type: messaging service
- request message type: Text, response message type: None
- FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
- Message flow: Start node -> pipeline pairs
in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
<Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
ag
a
glakjgk
>
<Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
*javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     Truncated. see log file for complete stacktrace
>
<Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     Truncated. see log file for complete stacktrace
>
...There are many BEA-381602 errors that occur continuously.
My question is how to solve this problem.
Any suggestion is appreciated.
Thank in advance.
Regards, CuongPT
Edited by: Doubt_Man on Jun 6, 2011 11:17 AM

Thank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.

Similar Messages

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Error encountered while polling a file using OSB

    Hi,
    This is the Exception when i try to poll a file using OSB
    <Error enco
    untered while polling the resource for the service endpoint ProxyService$CASE_RC
    $BUILD_DATA$FILE_HEADER$FileProcessPS: javax.naming.NameNotFoundExc
    eption: While trying to lookup 'wlsb.internal.transport.task.queue.file' didn't
    find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/file'
    javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transp
    ort.task.queue.file' didn't find subcontext 'wlsb'. Resolved ''; remaining name
    'wlsb/internal/transport/task/queue/file'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
    NamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    Truncated. see log file for complete stacktrace
    Can i know what is the issue?

    Hi,
    * java.lang.OutOfMemoryError: PermGen space
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
    at java.lang.Class.getConstructor0(Unknown Source)
    at java.lang.Class.getConstructor(Unknown Source)
    Solution: Increase the max permgen space -XX:MaxPermSize=256m
    There can be a leak in the permgen objects. If tuning parameters do not resolve the issue, we need to use the memory leak detector tools and find out which instances in the permgen space are not getting cleared.
    Reference - Weblogic wonders...
    http://weblogic-wonders.com/weblogic/2010/12/30/different-out-of-memory-issues/
    Cheers,
    Vlad

  • Error occured while creating site collection for the first time in SP2013

    While creating a new site collection in SharePoint 2013, I need to do atleast 4 times " Go back to Site" begore it appears properly. Could you please let me know why this error is occuering while we create site collection for the first time.
    Is it aknown issue or due to RAM contraints.I am using 16 GB of RAM in Web tier.

    You can get by with 16 GB of RAM so I am guessing that is not the cause.  Although, you could verify your memory utilization during the process.  As long as you don't exceed 95% you should be fine.  Next time, I would instead look up the
    error in the ULS logs using the correlation id and see if you can get more details of what is causing the error.
    Corey Roth - SharePoint Server MVP blog:
    www.dotnetmafia.com twitter: @coreyroth |
    SP2 Apps

  • Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

    Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
    Error encountered while signing:
    The Windows Cryptographic Service Provider reported an error:
    Access was denied because of a security violation.
    Error Code: 2148532330

    I assume you are implying "biztax" application here, right?
    I have contacted their program lead, with no result at all.
    Past days I have been searching for a solution - reinstalls / new systems - no solution.
    This issue appeared a week or two ago only.
    I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
    http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
    If anyone finds a solution to this issue, please do let me know - any help is appreciated.
    Biztax tells to use the "signature", not the "authentication"  - but it is only Auth. that is showing up as option to sign (that works)
    ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
    Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
    >  I noticed that when I try to open the pdf  document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader".    every piece of info helps I guess.
    Obviously last version of Reader   11.0.03

  • Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image w

    I am currently running CS3, windows XP, service pack 2, with recent update, 5.03 installed today.
    I just opened a 500 page document not in sections where 90% of the document is a placed PDF.
    The PDFS were placed using a sample Script that came with Indesign, that instructs the PDF to automatically flow each page after another.
    When scrolling through quickly in the pages pallette, I get the follwing error:-
    "Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image with different settings and try again."
    I click OK.
    Then I get the following error.....
    " Could not complete request because of database error. The File "ABC.indd" is damaged (Error Code: 3).
    Click OK....
    Then I get the following error....
    Adobe Indesign is shutting down. A serious error was detected. Please restart Indesign to recover work in any unsaved Indesign documents.
    Then I get the error.......
    Indesign.exe has encountered a problem and needs to close. We are sorry for any inconveneince.
    And I have two buttons to click....
    Debug or Close.....
    If I click Debug, it closes Indesign.
    Within this window there is also a window to gather further information....I click it and it tells me...
    "Indesign.exe....Error Signature AppName: indesign.exe AppVer: 5.0.3.662
    ModName: public.dll ModVer: 5.0.3.662 Offset: 0002e19a"
    To view technical inforamtion about the error report, clikc here....
    "Then it creates an error report and tells me where the report is located along with a scrollable window of 0xc0000005 and heap of zeros."
    The report conatains a whole heap of CHECKSUM ERRORS.
    CAN ANYONE PLEASE HELP??
    I had these errors before updating to 5.03 and the patch hasn't rectified anything!!

    Open the .inx file in CS3 (that's what you have, right?) and save as a new .indd.
    I'd also be tempted to open the tiff in Photoshop and do a save as to re-write it.
    Let us know if it helps.
    Storing files on the network leaves you more open tot he risk of file damage during transfer and save operations.
    Peter

  • Errors encountered while doing BCC Full deployment in the Applying phase

    Errors encountered while doing BCC Full deployment in the Applying phase. The stack trace is as below:-
    **** Warning    Fri Aug 02 09:43:24 BST 2013    1375433004207   /atg/epub/PublishingRepository  Using default JDBC type for: project:tar814 could not find this column in the table's meta data
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574278   /atg/epub/DeploymentServer      Run first apply phase: true
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574279   /atg/epub/DeploymentServer      Switch switchable CA datasources:
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574279   /atg/epub/DeploymentServer        isDeploymentRollback(): false
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574284   /atg/epub/DeploymentServer        Current Target live datasource name: DataSourceA
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer        CA switching datasource: /atg/commerce/jdbc/ProductCatalogSwitchingDataSource_production
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer          Current live datasource name: DataSourceB
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574285   /atg/epub/DeploymentServer          Current offline datasource name: DataSourceA
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574286   /atg/epub/DeploymentServer          The current CA live datasource is pointing at the Target offline datasource. No CA switch necessary.
    **** debug      Fri Aug 02 09:52:54 BST 2013    1375433574287   /atg/epub/DeploymentServer      Switchable CA datasources switched.
    **** info       Fri Aug 02 09:52:54 BST 2013    1375433574307   /atg/epub/DeploymentServer      DirectSQLReplicationAdapter: Starting FIRST phase data transfer.
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver SQL Statement Failed: [++ReplicationSQL++]
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver INSERT
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver INTO ndcatalog2.extn_block_link
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver      (
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        renderer_id,
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        link,
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        block_id
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver      )
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver SELECT
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.renderer_id,
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.link,
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        t1.block_id
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver FROM
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        extn_block_link t1,
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        extn_block t2
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver WHERE t2.asset_version =
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        ( SELECT MAX ( asset_version )
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver          FROM extn_block
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver          WHERE
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            (
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver              (
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver                checkin_date <= ?
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver              )
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            )
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            AND branch_id = ?
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver            AND block_id = t2.block_id
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver        )
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t2.version_deleted = ?
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t2.branch_id = ?
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t1.asset_version =  t2.asset_version
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver AND t1.block_id = t2.block_id
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver -- Parameters --
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[1] = {pd: checkin_date} 2013-07-30 10:23:57.867 (java.sql.Timestamp)
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[2] = {pd: branch_id} 10500 (java.lang.String)
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[3] = {pd: version_deleted} false (java.lang.Boolean)
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver p[4] = {pd: branch_id} 10500 (java.lang.String)
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver [--ReplicationSQL--]
    **** Error      Fri Aug 02 09:53:12 BST 2013    1375433592737   /com/screwfix/content/block/BlockRepository-ver         java.sql.SQLSyntaxErrorException: ORA-00904: "RENDERER_ID": invalid identifier
    Please note that we are migrating from ATG 2007 to ATG 10.0.1...Also we are doing deployment in this new environment for the first time only.
    Thanks a lot
    Pijush

    Hi Pijush,
    The exception towards the end of the stack trace says the RENDERER_ID is an invalid identifier. the Oracle error 00904 indicates the column name must be wrong. Can you verify the repostiory xml on the BlockRepository and check the column name.
    Regards,
    Srikanth

  • Error encountered while executing the transform

    My message failed at orchestration with the following error. Kindly help in finding the issue.
    xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
    Shape name: CodecoMapping
    ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
    Exception thrown from: segment 1, progress 22
    Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
    Exception type: XTransformationFailureException
    Source: Microsoft.XLANGs.Engine
    Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
    The following is a stack trace that identifies the location where the exception occured
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
       at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
       at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
       at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
    Additional error information:
            Exception has been thrown by the target of an invocation.
    Exception type: TargetInvocationException
    Source: mscorlib
    Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
    The following is a stack trace that identifies the location where the exception occured
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
    Additional error information:
            Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
    Exception type: XslTransformException
    Source: System.Data.SqlXml
    Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
    The following is a stack trace that identifies the location where the exception occured
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
       at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
    String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
       at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
       at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

    Hi,
    It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
    "Exception has been thrown by the target of an invocation" is a very generic exception. you
    need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
    http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Error while running a BDC for the Transaction F-02

    Hi,
           I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
           When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
            How to solve this issue?.
            Waiting for ur replies.........
    Regards
    N.Senthil

    Hi,
    When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
    Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
        Refer below theard for sample bdc code for f-02.
    https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
    Regards

  • Error while generating CW kin for the new BG created for Taiwan

    HiAll,
    Please provide your help to resolve this issue,
    Iam getting error while generating CW kin for the new BG created for Taiwan, China.
    Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
    Please let me know, is there any step missed to create CW kins for new BG's.
    Thanks-
    Sowmya.
    Edited by: user13419037 on Jul 2, 2012 3:41 AM

    Hello ,
    Your solution can be solved by enabling the displayed check Box in Location Address DFF
    Thanks
    Bindu

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Error while releasing credit block for the order

    Hi all,
    I am getting follwing error while releasing credit block for the order in VKM1
    Incorrect index structure for table IVBEP1
    Text
    Incorrect index structure for table IVBEP1
    Diagnosis
    Internal error.
    Procedure
    Repeat the transaction.
    If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
    If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
    But we are not transfering any orders to CRM.The order can be only seen in R/3
    Please assist
    Regards
    Mano

    Hi
    KIndly check the oss note 505876 in may help you
    Regards
    Damu

Maybe you are looking for

  • Date Validation - End date before Start date

    This may be a very simple validation but I seem to be having trouble. I've got a form which requires a date range to be selected (Date Picker fields)...a Start date, and an End date. I've created a Function Returning Boolean validation with the code

  • Broblem with display of macbook pro

    hi i have macbook pro 15" model mc723  early 2011 During working sometimes i have problem About display what's the problem and what's the Solution? tnx

  • Agent going to ready state after login

    Hi guys, I have UCCX 5.0(2) and I would like to force agent to go to state ready after login. There were some posts on this topic and they suggested to play with workflow: 1. add add action agent ready at startup - for this I get: "Error on Startup E

  • Dynamic assign in field symbols

    dynamic assign in field symbols

  • RV325 System Log Entries - Kernel - kernel: wrong ip[0],not_list[0]

    Hello, I have a RV325 Router. Entries in the System Log are mysterious to me and all my search results and reading are not relevant. The Event-Type is - "Kernel", and the Message is "kernel: wrong ip[0],not_list[0]" The Log entries occur every few mi