Error while releasing credit block for the order

Hi all,
I am getting follwing error while releasing credit block for the order in VKM1
Incorrect index structure for table IVBEP1
Text
Incorrect index structure for table IVBEP1
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
But we are not transfering any orders to CRM.The order can be only seen in R/3
Please assist
Regards
Mano

Hi
KIndly check the oss note 505876 in may help you
Regards
Damu

Similar Messages

Credit block for Slaes Order on Days Basis

Hi SAP Gurus,
As my client requirement want Credit block for sales order with days basis.For example Customer has credit 5000 and 30 days.Even credit value not exceed on 31st day, But sales order has to block .
Please requesting to all kindly needful for me.

Hi
Check payment terms in Customer master data, billing tab page. We can define payment terms. And if you want to block the customer use dynamic credit check.
Enter 5,000/- in maximum document value in FD32
For Credit management to be working
1. In def of SD type we need to speciy Automatic credit control in the field " Check Credit Limit"
2. In the defination of corresponding item category we have to check the field "Credit Active".
Award points if it is useful
Anil

Error while releasing an invoice for accounting.

Hi Experts,
I am encountering an error while releasing an invoice for accounting. The error displayed is 'error in transaction currency'. Please help me out with this.
Regards,
Sunita

Hi Rish,
Simply go to FS00 and click on edit cost element and for CElm Category give some input based on the G/L account type.
You might have to seek help of an FI consultant to do so.
Also in KA01 create this G/L account as a cost element against your controlling area assigned to your Chart of Accounts, you can do so by clicking on Extra's tab in transaction KA01.
Just let me know if it works.
Reward if helpful.
Regards
Ravi

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

Error while generating CW kin for the new BG created for Taiwan

HiAll,
Please provide your help to resolve this issue,
Iam getting error while generating CW kin for the new BG created for Taiwan, China.
Error : Value TW is not a Valid context for the Descriptive Flexfield Person Developer DF.
Please let me know, is there any step missed to create CW kins for new BG's.
Thanks-
Sowmya.
Edited by: user13419037 on Jul 2, 2012 3:41 AM

Hello ,
Your solution can be solved by enabling the displayed check Box in Location Address DFF
Thanks
Bindu

Error while setting up enviroment for the application

Hi,
Im getting a popup box displaying the error message
C:\WINDOWS\system32\ntvdm.exe
Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
When I try to excute an external exe, why am I getting this error? and is there a way of getting this exe to execute properly without the error?
Here my code for excuting the external exe
String[] cmd = {"C:/gen.exe", "C:/a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor(); "gen.exe" is the program i wish to execute and "a.zip" is the parameter i wish to excute it with.

class ExecRuntime {
public static void main(String args[]) throws Exception {
String[] cmd = {"C:\\gen.exe", "C:\\a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor();
} Here we need to use backslashes, because the command is passed to the OS as is.
If you need to be in C:\ to execute from command line, you will also need to use the
exec() version that allows you to specify the 'current directory'
Edited by: baftos on Mar 7, 2008 12:13 PM

"error while evaluating Java script for the package"

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Error while doing Goods Receipt for Production Order

We have created following test data in our Development System:
Production Order:1000016
We have processed the abv. production order thru create, release & confirm stages.However, on doing Goods Receipt of the Order thru MB31, system is giving following error:
Msg.No.NA M7001:Check Table TFBEFU_CR entry 10 does not exist.
Can u pl help me in analysing the same.
With Rgds.,
Rakesh Kumar
09324847499

Hi,
Maintain the OPK9 (Valuation Variant for the Order Costing).
It will go thorugh..
Otherwise revert for further discussion..
Regards,
Siva

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Pricing Redetermination while releasing credit block of a 3rd party order

Hello,
The issue as is follows:-
I have a sales order, that is a third party order (PR created, the PO ..etc). The pricing is automatic, but can be edited in the condition screen of the sales order. Some times we maintian the price directly in the order (rarely the condition reocrds may not be existing), there are some manual conditios also, like insurance, transit charges ..etc. The issue happens when the sales order goes for a credit block.
We releases the credit block using VKM3, that moment the system crested the PR and re-determines the price. As I can see, the min condition, which I entered the price manually , change sback to ZERO (since the condtition reocrd is not maintained), but the manual conditions remains as it is.
Is there any way we can disable the price redetermination while releasing the credit block? Please let me know if you need more details.
Regards,
SAM

It looks you can use USEREXIT_NEW_PRICING_VBAP in include MV45AFZB to control this behavior. The logic could be, during VKM*, don't carry out new pricing. You can discuss with you ABAP'er on exact coding.
Regards,
OK I take one step back now..The system does the repricing, because the when the credit release happens, the ATP check is carried out again and the quantities are reconfirmed. I assume in your case, when the sales order goes into credit hold, the confirmed quantity is set to zero. You can make the system keep it confirmed for third party sales orders and not pass the requirements to purchasing. Check the routine assigned in t.code OVB8, I assume now in your system, it could be assigned with 101. Change that to 1 and test. If you want the system behaves differently as per business requirement, then copy this routine 1 and create a new one in t.code VOFM for example 901 add additional coding, then reassign in OVB8. Check the results and update the forum. By this way I believe, you need not use any user exit.
Edited by: Shiva Ram on Feb 7, 2012 11:50 AM

Error while doing Goods receipt for process order. Error code: "BS027"

I am getting error while doing GR for a day whereas previous day(s) GR is already done and also 2 days post that day are also done successfully.
Error : ""Goods receipt for prodn. order" is not allowed (ORD XX-CEMTSAL) " (XX = First two characters of plant code)
Error code: BS027.
Thanks to all in advance.

Hello,
This issue would occur when you want to post a confirmation for a production order. The error message is generated if you wanted to post a backflush for a component and if this component was assigned to a sales order stock. The sales order itself was assigned to a work breakdown structure element which should be debited with the actual costs. However, the business transaction 'Confirm' is not permitted for a work breakdown structure.
Please look into SAP Note 62367 and 64370
Hope the information is helpful
regards

Re:Error while updating Warehouse List for the items in DTW..!!!

Dear SAP Members,
We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
No. Status Key Reason
1 Updatefailed ItemCode cannot find this object in B1-application defined or object defined error65171
How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
With Regards,
Revathy

Hi Revathy,
I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
If it is one time effort you may just map them manually.
I hope I am making sense to you.
If you want us to try it out, give the name of the template, the content in the template may be few lines.

Error while posting Goods issue for the reservation

Hi,
I am getting an error while trying to post the Goods Isuue for the reservation using MIGO transaction. The error is 'Level AR belongs to cash position (source symbol PSK)'.
Please help me in solving this if anyone has any idea, let me know what am I supposed to do.
Regards,
Lavanya.

Hi
I think Cash Management (TR-CM) module implemented in your system.Please post this in Finance forum.
Regards
Ramakrishna

COPA Value Field +/- Error while releasing Billing Document for Return orde

Hi,
We have done Sale Order - PGI - Delivery and Billing for Quantity 10 and the customer returned 10 Qty due to some problem.
When i am doing the return process billing, I am getting the below error...
9000000892 000000 Check value field assignment for condition SGL1*
When condition "OR01" (application "V") was transferred to the value field "ERLOS" in operating concern "OR01" in
Profitability Analysis, the following became apparent:
o   The condition can take both positive and negative
    values
o   The flag "Transfer values with +/- signs" has not be
    set in Customizing for value field assignment.
Inconsistencies in the data could occur as a consequence.
Can any body help me on this issue
Is there any consequences if i activate +/- sign in KE4I for the above value field Please suggest me
Thanks
KC

Hi Kischow
You shud tick the +/- indicator only if
1. any One condition type repeats in the pricing procedure and can have +ve and -ve values
2. Two cond types in pricing procedures are assigned to same Value Field and the cond types can have +ve and -ve values
In COPA, all values are transferred as absolute values without + or - sign, with some exceptions ofcourse....
So, if you dont check + / - indicator in the cases mentioned above, say, +100 and -80 will be transferred as 100and 80 and the result will be 180 instead of 20
Regards
Ajay M

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = zptp_s_rf_migo_261-aufnr
 IMPORTING
 output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = gs_header
 goodsmvt_code = gs_gmcode
 IMPORTING
 goodsmvt_headret = gs_headret
 TABLES
 goodsmvt_item = gt_item
 goodsmvt_serialnumber = gt_serial
 return = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Error while releasing credit block for the order

Similar Messages

Maybe you are looking for