Error: Error in BICMODULE-module:No valid MessageTypeReport availableABORT

Hi All, I have done configuration for File to Idoc scenario where i am recieving an EDI file for ORDERS V D01B and we are placing an idoc to respective SAP system. We are getting the following error in BIC configuration.
"Error: Error in BICMODULE-module:No valid MessageTypeReport available. ABORT"
We have done the similar configuration for ORDERS D96A and D93A and those interfaces are working perfectly fine.
Do you guys have any idea about this error then please help me.
Regards
Avanish

Hi Avinash,
Did you set bic parameter split to true?
Module key Parameter name Parameter value
bic split true
Regards,
Shweta

Similar Messages

See Burger Error in BICMODULE-module:Adapter call failed. Reason: null

Hello All,
Scenario IDOC to File using Seeburger BIC problems in in my receiver adapter when converting from XML to EDI.
Error is:
"Message processing failed. Cause: Error in BICMODULE-module:Adapter call failed. Reason: null"
The Seeburger modules used in my receiver adapter:
1     localejbs/CallBicXIRaBean     Local Enterprise Bean     BIC_MT
2     localejbs/CallBicXIRaBean     Local Enterprise Bean     BIC
3     localejbs/Seeburger/FileStore     Local Enterprise Bean     ARCHIVE_EDI
4     CallSapAdapter     Local Enterprise Bean     0
with following module configurations
BIC     destDelimiter     @http://seeburger.com/xi/bic/destDelimiter
BIC     destSourceMsg     source
BIC     destTargetMsg     MainDocument
BIC     dynamicConfiguration     true
BIC     newLine     true
BIC     useAttribIfSet     true
BIC_MT     PartnerLookup     on
BIC_MT     destSourceMsg     MainDocument
BIC_MT     destTargetMsg     MainDocument1
BIC_MT     mappingName     XML_Generic_ANSI_X12_to_DB_MT_OUT
BIC_MT     saveSourceMsg     source
Can some one tell me why there is an Error and what additional module configurations it requires .
Thank you,

Hi,
If possible go to mapping in BIC designer Tool and execute the same by passing your payload there...
if you encounter any errors then there might be a problem with mapping developed...or can be payload..
Also check the parameter used for destSourceMsg source ...is that the source message which contains the payload ?
HTH
Rajesh

Error in BIC MODULE BIC MODULE modules: trigger file [not specified] conta

Hello, i have a problem with the BIC Seeburger MD
Scenario overview:
IDoc Invoice02 => Message Mapping (Seeburger content) => FTP Seeburger Comm. Canal integrated with BIC adapter. This works correctly. Then I tested the field mapping and the BIC Adapter brings no more errors in field mapping.
BUT NOW THIS ERROR MESSAGE IS:
Error in BICMODULE modules: Temporary error: BIC XI Adapter call failed. Reason: Error: [Error: ID = 1104; LEVEL = 3] trigger file [not specified] contains no valid trigger. DESCRIPTION: You have specified no valid trigger for that mapping. Please change this within BIC Mapping Designer.
Destination Message is the Edifact Invoic D96A
I hope one of you can help me
Kind regards
Tobias

Hi Tobias,
there is a either a problem with your XML Message or with the BIC Mapping which converts XML to EDI.
What's the name of the BIC-Mapping that you use in your FTP Module chain?
You can also check the following to make sure, your BIC Mapping works correctly:
a) Take your Invoice Idoc and convert it with the Message Mapping into Edifact-XML
b) Use BIC Mapping Designer and open the Mapping that you use in the Module Chain (Should be XML-->Edifact)
c) Take the Edifact-XML Message from your PI Message Mapping and convert it in the Test Environment of BIC Maping Designer.
If you get the same error, there's something wrong with your Edifact-XML message
If the mapping works, there's something wrong in your module configuration. (Maybe you can post your module configuration)
regards,
Daniel

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Error initializing ejb-module; Exception javac.exe not found under

Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIU

Dear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi.

SYNTAX ERROR in function module CACS_BUPA_PAI_SPECIAL_CACSB1

Hi experts,
   I am trying to create business partner in SAP treasury module with role - general business partner and validity period 01/01/0001 - 12/31/9999. I am gettting syntax error in Function module CACS_BUPA_PAI_SPECIAL_CACSB1, it says
The key of internal table 'LT_BUT0BK' contains components of type 'X' or 'XSTRING'.
The "Read table LT_BUTOBK" statement is not permitted for such tables in a unicode context.
Please let me know if you have any solution for this.
Thanks in advance.
Edited by: Thanvi maraka on Apr 17, 2009 3:27 AM

Hello Thanvi
It seems that you need to apply the OSS note 1041283:
FUNCTION cacs_bupa_pai_special_cacsb1.
*"*"Lokale Schnittstelle:
DATA: lt_but0bk TYPE TABLE OF but0bk WITH HEADER LINE.
CALL FUNCTION 'BUP_BUPA_BUT0BK_GET'
       TABLES
            t_but0bk = lt_but0bk.
* einmal vorhanden -> nehmen; nicht vorhanden -> Feld muss leer sein
* mehrmals vorhanden -> Mussfeld
READ TABLE lt_but0bk INDEX 2.
IF sy-subrc NE 0.
*    READ TABLE lt_but0bk.          "NOTE 1041283   " <<<<<<<<<
     READ TABLE lt_but0bk FROM lt_but0bk.            " <<<<<<<<<
    IF sy-subrc = 0.
      cacs_s_bupaw-bank_id = lt_but0bk-bkvid.
    ENDIF.
ELSE.
Regards
Uwe

Error Initializing localization module

Hi,
I logon to the server,I try to run automation scripts in cmd prompt.I type essmsh cmd,hit enter,I am getting " Error Initializing localization module".
Then I added ARBOPATH and ESSBASESERVER path in system settings,still I am getting the same error.Can anyone help me out in resolving this.
Swathi.

Not at all, it's just much easier to help when you set out everything you're doing in detail like that. Thanks. :)
You have successfully started MaxL and logged in to Essbase (so far so good!). But 'essmsh' is not a valid MaxL statement at all. 'essmsh' is the name of the MaxL executable itself. So I'm wondering why you are trying to enter 'essmsh'.
I suspect that you are copying the syntax from an existing script, is that right? You probably have an existing .bat file that says something like this:essmsh MyMaxLScript.mshThe 'startMaxL.bat' just replaces the 'essmsh'. So to call the MaxL automation script MyMaxLScript.msh you really just need to do this:startMaxL.bat MyMaxLScript.mshIn short, just use 'startMaxL.bat' wherever you see 'essmsh'.
Does that make sense?

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

Quicktime Export Error: "An output module stopped responding."

I'm experiencing an odd export error whenever I use any Quicktime codecs:
"After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
System specs:
Windows 7 64-bit
Intel i7-2600k processor
8 GB RAM
GTX 580 GPU
Software:
Adobe CS6
AE Plugins include Tracode Suite 12 and Optical Flares
Quicktime 7.7.3
Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
Josh

Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
*EDIT*
That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
Thanks,
Josh

I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

Music purchased from the iTunes Store is automatically available in iCloud. This is "iTunes in the Cloud" and does not require an iCloud account. The music is stored in the iTunes Store, not in a personal iCloud account.
If you don't have any Apple devices you will not be able to create an account. It wouldn't be any value to you anyway as it syncs data on you computer with your Apple devices. If you don't have any, there is nothing to sync.

[PL/SQL Error] ORA-01843: not a valid month, not sure how to troubleshoot

Trying to use PL/SQL to automatically create a report that show the following:
Daily:
# of Registered Users
# of Completes (assessment)      Average per User
# of Starts (assessment)      Average per User
Weekly:
# of Registered Users
# of Completes (assessment)      Average per User
# of Starts (assessment)      Average per User
Yearly:
# of Registered Users
# of Completes (assessment)      Average per User
# of Starts (assessment)      Average per User
When I run the PL/SQL I get the following
[error]
ORA-01843: not a valid month
[error]
The error occurs on this part of the PL/SQL
--registered users weekly starts
select count(*), trunc(next_day(sysdate-29, 'SUNDAY')-7), trunc(sysdate-29)
     into v_weekly_count_total_ru, v_weekly_start_date, v_weekly_end_date
          from entities
               where list_id = 3290
               and participation_code_id = 10
               and trunc(participation_date)
               between trunc(next_day(sysdate-29, 'SUNDAY')-7) and
                        trunc(sysdate-29);I'm using the number 29 because I'm using a test database to test this first before moving it into production. And my test data only goes back to early August 2006.
Also, I'm not doing anything with months, so I am suprised that it is throwing this type of error.
thanks

I tested a snippet of code in my production environment, just to see if I would get any results:
--registered users weekly starts
select count(*), trunc(next_day(sysdate-1, 'SUNDAY')-7), trunc(sysdate-1)
     --into v_weekly_count_total_ru, v_weekly_start_date, v_weekly_end_date
          from entities
               where list_id = 3290
               and participation_code_id = 10
               and trunc(participation_date)
               between trunc(next_day(sysdate-1, 'SUNDAY')-7) and trunc(sysdate-1);
COUNT(*)     TRUNC(NEXT_DAY(SYSDATE-1,'SUND     TRUNC(SYSDATE-1)--INTOV_WEEKLY
1     09/10/2006 00:00:00     09/11/2006 00:00:00I did a double check in my test DB to make sure there is data there:
select count(*)
     from entities
          where trunc(participation_date)
          between to_date('01-08-2006','DD-MM-YYYY')
          and to_date('14-08-2006','DD-MM-YYYY')
          and list_id = 3290;
COUNT(*)
11So I'm pretty sure that I'm not pulling anything null.
thanks

Need help in understanding the error ORA-01843: not a valid month - ECX_ACT

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

SQL execution error, ORA-01843: not a valid month

Im using ASP/VBScript and its my first time starting to use Oracle as a DB provider.
Just having an issue with a statement that I have.
Heres my statement:
SELECT T592_NOON.SHIP_CODE, T592_NOON.REPORT_DATE, T592_NOON.L_B, T592_NOON.AVERAGE_SPEED, T592_NOON.SEASTATE, T592_NOON.DISTANCE, T592_NOON.WIND_DIRECTION, T592_NOON.IFO_MAIN, T592_NOON.IFO_BOILER, T592_NOON.IFO_AUXENGINE FROM T592_NOON WHERE (((SHIP_CODE)='S271') AND (REPORT_DATE BETWEEN to_date('08/02/2004 13:00:00', 'DD-MON-YYYY HH24:MI') and to_date('28/02/2004 18:15:00', 'DD-MON-YYYY HH24:MI')))
Whenever I run it it errors and returns:
SQL execution error, ORA-01843: not a valid month
Can anyone tell why this wouldnt work?
REPORT_DATE type is DATE
REPORT_DATE Sample data: 2003-04-28-12.00.00.000000

Changing the format of the date seemed to fix it.
Incorrect: '08/02/2004 13:00:00'
Correct: '08-FEB-2004 13:00'

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

Error: Error in BICMODULE-module:No valid MessageTypeReport availableABORT

Similar Messages

Maybe you are looking for