Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

Similar Messages

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

Archive Source Files with Errors is Missing

Hi
I don't have this option or "Handling of Empty Files" available in ID on my Live or QA Servers although I do have on my Dev. They are all on the same SP and Patch Level 7.0 SP 14. Any suggestions ?
Thanks

Hi Thanks for the replies .. I found out there was a difference between the CIM Model between the environments, which has been now levelled. Folloing this I refreshed the CPA cache and I reimported the SAP BASIS 7.00 component but no joy. In the IR If I right click on the SAP BASIS BASIS package on my dev environment -> Display Support Package It displays SPS 9 and SPS 10. If I do the same on my QA env then it displays only SPS 9. This is surley where the issue is but I do not know how to rectify. Any ideas ?, is this because the CR content ?, (CIM Model, CR Content and XI Content are a little unclear to me). Is it an idea to do an export and import from my Dev to QA environment ?.
Thanks in Advance
Damien !

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Wuala Validating source files with md5sums... wuala.tar.gz . FAILED

[r-c@r-c-laptop wuala]$ makepkg -si
==> Making package: wuala 2-20110707 (Sat Oct 15 13:17:49 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading wuala.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 303k 100 303k 0 0 56284 0 0:00:05 0:00:05 --:--:-- 684k
-> Found 0001-fix-loader-location.patch
-> Found wuala.png
-> Found wuala.desktop
-> Found LICENSE
==> Validating source files with md5sums...
wuala.tar.gz ... FAILED
0001-fix-loader-location.patch ... Passed
wuala.png ... Passed
wuala.desktop ... Passed
LICENSE ... Passed
==> ERROR: One or more files did not pass the validity check!
I tryed to install it mannualy and also using yaourt. Nothing works.

What I need to change just checksums or something else? Which checskums to use?
I tryed copy and paste during installation but doesnt work:
http://pastebin.com/MceCxbD3
http://pastebin.com/ziQKuE5t

The XML Source file is unavailable for viewing

Same java application is deployed on two different servers. One server is in the intranet zone and the second one is in the internet zone. The request sent to the server is an xml file and the response from the server is also an xml.
In intranet server, when we are trying to view the source of the response xml file , we are getting a prompt displaying the message "The XML Source file is unavailable for viewing".
But in internet server, when we are try the same, we are getting a valid xml resposne. We are using IE 6.0 - SP1 browser.
We tried the same in the mozilla browser and found the same results. Any suggestions on this?

One possibility is the IE security settings under tools/internet options. The intranet site may have a lower security setting than the internet site. The browser may not ne letting the internet site download the xml.

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

Farmville will not load using Firefox, but it will with IE, for over a week now.

Farmville will not load using Firefox, but it will with IE, for over a week now. I have cleared the cache and cookies multiple times, updated flash player, did a virus and malware scan, allowed java script, allowed mozilla in the Windows firewall, contacted Zynga multiple times, and yet Farmville still will not load using Firefox, my main and preferred browser. I'm very frustrated and want this fixed.

Thanks for the advice cor-el, but if you would read the info I posted, I already did that, SEVERAL TIMES. That's not the solution unfortunately.

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

What application can you use to open a file with the .acc extension?

What application can you use to open a file with the .acc extension?

http://www.fileinfo.com/extension/acc

Cannot use Offline Files with DFS share: "Access denied" error for DfsrPrivate in Sync Center

Hello,
I have an infrastructure that uses DFS to move files to different sites and we are using a GPO to define Offline Files for users at those sites. Whenever we try to initiate a manual sync, an error stating "Access
denied" is generated for all DfsrPrivate directories and the Sync Center reports it as a failed sync. We have tried giving Domain Users, Everyone, and invidiual accounts Write, Modify and even Full Control permissions to the DfsrPrivate directories and
as it seems, only users with administrative access and allowed to sync properly. Is there something obvious I'm missing here?
-Girard

Hi,
I cannot help test on this moment but we should not create offline files on DfsrPrivate folders which will cause issue. Try to exclude those folders as Offline Files and it should work in Sync Center.
If you have any feedback on our support, please send to [email protected]

Use of "Archive Source Files with Errors" for BIC module error

Similar Messages

Maybe you are looking for