Error: Failed to decrypt cert PFX data - distmgr.log

Hello,
When I distribute content to a DP, I get this error repeatedly in my distmgr.log:
SetObjectSecurity failed; 0x80070002
then a ton of these after:
Failed to decrypt cert PFX data
I'm running with HTTPS, and the packages always seem to copy ok, anyone know what this error indicates?
Terry

I've been able to figure where this error comes from.
I had 51 errors in my distmgr.log, i've reassign a DP o do a test and after the reassign, I had 50 errors. (-1)
This makes sense because the 2007 DP certificate is not known to SCCM before the reassign. Once reassign the DP create it's own cert in 2012 so the error goes away.
This error can be ignored as it will be removed after you reassign all your shared DP.
Benoit Lecours | Blog: System Center Dudes

Similar Messages

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

Error CodeB2B-51093 Decrypting S/MIME message failed

Hi,
We are not able to decrypt the messages received from partner
B2B 11.1.1.4
sending 820 over AS2
Receiving over https://host:port/b2b/httpreceiver
Keystore: configured and contains certs for the TP and for host TP.
Error :Error CodeB2B-51093 Decrypting S/MIME message failed
Also, i want to know when we are receiving the messges over https://host:port/b2b/httpreceiver how does B2B know which cert to use for decrypt

Error CodeB2B-51093 Decrypting S/MIME message failed Make sure that your TP is encrypting the message using public key which you shared with him and you have configured corresponding private key in the keystore on B2B console. You may refer -
http://anuj-dwivedi.blogspot.com/2011/04/implementing-message-security-in-oracle.html
Regards,
Anuj

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B

Hi,
I have developed several SSIS packages with the last Beta of VS2005 / SQL Server CTP. After the public release I tried to uninstall the CTP-Versions to install the msdn finals but this time I got lost and was not able to satisfy the requirements of the final setup of VS2005. So I decided to install the whole pc again and after some hours I had a clean machine (XP with latest SQL Server 2005 Standard and VS2005 Professional). Now I have tried to open my SSIS-Project but getting the following error: Error loading ImpNetqNewsRss.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Schlüssel ist im angegebenen Status nicht gültig.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
After some “googleing” I found this thread: http://forums.microsoft.com/msdn/showpost.aspx?postid=22739&siteid=1 If I’m right the solution should be to use a Package Password, but I can’t figure out where I have to go enter/change a password. I even can’t remember I that ever used a password on my old installation for a dtsx-package?? Any help is welcome… Regards, Dirk

Let's Say your package name is MyPackage
In Visual Studio Go to Control Flow Tab.
Righ Click on an empty area inside the window not clicking "Data Flow Component" . pop up menu click the the properties to get to the properties window of MyPackage package.
Under the Security Area -> You will see
        ProtectionLevel              -- Change that to EncryptSensitiveWithPassword
        PackagePassword          -- enter password-> temp
This should do the trick however to be sure:
Below you will connection managers:
Database Connections (if more than one preform on all)
Double Click your connection to get the property pages. Click "ALL" under the Connection Link on Left Side. Scroll Down to Security Area.
  Provide the followings:
   Password (for the sql userid being used)
   Persist Security Info = True
Save the Package and connect to SQL Integration Srvices in SQL Manager (To Server e.g; DBServer (Integration Services)
Stored Packages -> MSDB --> Right Click --> choose Import Package
in the property dialog box
              Package Location :   File System
              Package Path -- Choose the location of your dtsx file.  (MyPackage.dtsx)
  Leave everything default.
Click OK.
  Dialog box will appear asking for the Package Password
Provide the password-> temp
You have successfully imported the package called MyPackage.
In order to create a job.
In the job Step->
       Type: SQL Server Integration Services Package
       In the General Tab:
                 Package Source : SSIS Package Store
                 Server : DBServer (Where we stored our package above)
    Click the button for the package: Choose your package (MyPackage)
   Click OK :
    It will ask the package password again : temp
                Package has successfully been loaded to Job Step. Now you can schedule and do a test run on the job.
Thanks for the patience of reading for those who are expert.
- Azhar

AOSKit ERROR: CCCrypt AES decryption failed

Here is the full error
AOSKit ERROR: CCCrypt AES decryption failed: input buffer size = 2944, data size = 2928, output size = 0, keyLen = 16, result = -4301
I discovered this because Mail and iCloud (System Preferences) hang when opening them (with a spinning candy wheel).
This error comes up a lot in my console, but ONLY when I am connected to my office network. It might be some sort of security setting, but I have no idea what I would look for.
Thanks!

Here is the full error
AOSKit ERROR: CCCrypt AES decryption failed: input buffer size = 2944, data size = 2928, output size = 0, keyLen = 16, result = -4301
I discovered this because Mail and iCloud (System Preferences) hang when opening them (with a spinning candy wheel).
This error comes up a lot in my console, but ONLY when I am connected to my office network. It might be some sort of security setting, but I have no idea what I would look for.
Thanks!

OBIEE 11g BI Publisher; New Data Set Creation Error "Failed to load SQL"

Hi,
I'm trying to create a new SQL data set (from a client machine). I use "query builder" to build the data set. But when I click "OK", it fires the error "Failed to load SQL".
But strangely, if connect to the OBIEE server's desktop and create the data set it works without any issues. I wonder this would be a firewall issue. If so what are the ports I should open.
It's a enterprise installation. And we have already open 9703, 9704, and 9706.
Has anyone came across such a situation?

Talles,
First of all you might have more chance of getting a response over in the BIP forum. Other than that all I can think of is: is your MS SQL Server running with mixed mode auth?

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Report error "Failed to retrieve data from the database."

Post Author: tknorst
CA Forum: .NET
I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
Failed to retrieve data from the database.Details: [Database Vendor Code: 229]Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
I found very little info on this error on the web (google) - so I hope someone here has an idea.

You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
Also do not change the schema of he report.

*ERROR: failed to open file " export directory path /ABAP/DATA/SAPSTR.LST

Hello experts,
I am doing system export.
as per the system copy guide I follows all steps.
when I tried for export preparation.
I got following error in "/tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/EXP/CENTRAL/AS-ABAP/PREEXP/R3ldctlExport.log"
ERROR: failed to open file "/db2/PRD/sapdata4/export_prd/ABAP/DATA/SAPSTR.LST"
/db2/PRD/sapdata4/export_prd is my export directory.
but I found that the "SAPSTR.LST" is not exist in the location.
also I don't find any log regarding this error.
how to resolve this? please guide.

Hi Rupesh,
In continuation of previous mail, there is keyboard problem hence spelling mistakes.
Various possible solutions:
Report SMIGR_CREATE_DDL has to be executed before starting export preparation.
OR
Download llatest kernel patch and apply them in /spmnt/<SID>/exe
make sure download latest patch R3ldctl file and R3load from SAP Marketplace and apply them in to /sapmnt/<SID>/exe.
Make sure export dump folder should be in local drives (in windows) or local filesystems i.e.do not use network drives (windows) or NFS (in case of unix).
FInally check permission by using chmod 777 in exportdump folder in case of unix.
Regards
APR

The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.

Hi,
I keep receiving an error message in the Event Logs for Exchange 2010:
The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.
Event ID: 2280 - IIS-W3SVC-WP
OWA is working.
In IIS- HTTP Redirect is Disabled On the Default Website.

Hi
   According to your error, the path is incorrect or dll file is corrupted.
   You can modify file “\Windows\System32\inetsrv\config\applicationHost.config”
    please check this sentence
   <add name=”kerbauth” image=”D:\Exchange,Server\V14\Bin\kerbauth.dll” />
   Can you find kerbauth.dll in this path?
   If you can find this dll, please copy same dll from other exchange system and replace of it.
If you can’t find it, please modify path.
Terence Yu
TechNet Community Support

Error:Failed to retrieve data from database [Vendor Code:3001]

Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
SELECT "CLIENT"."CLIENT_NAME",
        "RECOVERY"."AMOUNT",
        "RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
        "RECOVERY"."ALLOCATION_CHECK_AMOUNT",
        "RECOVERY"."RECOVERY_DATE"
   FROM "HRI1_OWNER"."CLIENT""CLIENT",
        "HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
        "HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
        "HRI1_OWNER"."RECOVERY""RECOVERY"
WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
    AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
    AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
    AND "CLIENT"."CLIENT_CODE" <> 'CLIENT 1'
    AND "CLIENT"."MAJOR_CLIENT_ID" in
        (Select major_client_id
           from major_client
          where major_client_code in ('LA', 'PFG'))
ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM

@oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
@centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
Thanks
Edited by: user11961230 on Nov 12, 2009 7:12 AM

Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"

I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.

I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter

Import of gmail cert errors out - [ERROR]   - Failed import certificate: gmail

I am trying to use javamail to read mail from gmail. When I try to import the ssl cert from the comman line it errorsout
java -jar lib/javacloud.jar add-ssl-certificates -user user -serviceinstance serviceinstance -identitydomain identitydomain -path /Users/user/gmailssl/ssl.cer -datacenter us2 -alias gmail
[ERROR]   - Failed import certificate: gmail, content: -----BEGIN CERTIFICATE-----
            LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUVkakNDQTE2Z0F3SUJBZ0lJ
            R2NNRjdqZVZNb0F3RFFZSktvWklodmNOQVFFRkJRQXdTVEVMTUFrR0ExVUUKQmhN
            Q1ZWTXhFekFSQmdOVkJBb1RDa2R2YjJkc1pTQkpibU14SlRBakJnTlZCQU1USEVk
            dmIyZHNaU0JKYm5SbApjbTVsZENCQmRYUm9iM0pwZEhrZ1J6SXdIaGNOTVRRd056
            RTFNRGcwTURNNFdoY05NVFV3TkRBME1UVXhOVFUxCldqQm9NUXN3Q1FZRFZRUUdF
            d0pWVXpFVE1CRUdBMVVFQ0F3S1EyRnNhV1p2Y201cFlURVdNQlFHQTFVRUJ3d04K
            VFc5MWJuUmhhVzRnVm1sbGR6RVRNQkVHQTFVRUNnd0tSMjl2WjJ4bElFbHVZekVY
            TUJVR0ExVUVBd3dPYzIxMApjQzVuYldGcGJDNWpiMjB3Z2dFaU1BMEdDU3FHU0li
            M0RRRUJBUVVBQTRJQkR3QXdnZ0VLQW9JQkFRQ3U0dk9yCkxneU5zSGljeEJPUmdP
            Mk9PZlhLeEVLYjgzME56TnU2ZWx1YmJmMVQ0NUdpbEIzZkhnRFFKRUxSeWRUUlpp
            bG8KRWZ2NzVBZzd1UlFNL00xdGsrMWgxOHdEcEpaZW0rekZtSmNzMzBjY0JOMjFD
            bkN2cXNJRVlKTXlZM2tjVjR2RAp4NDRieDZWdkVBbUo5L2tpRko3eFJVbENjaHU1
            WVZPRm9Wa01hRWF4M1VXYjVGdGk5cGU4VmdZZGFzdWs1M2FlCjhadUlyNHBGZXc5
            ZnJheE9lLzZMWEVhUE1TdzYyMktTV3B5Sy9HVWJhQXAwN2hWMTFjK0xWZ2psVURU
            Z0ErMmsKbkRpZ1dyZGIreUxMOUh2M1dOTFdqRUFIRldoRWNlNVF3VjNTTjhKTGdh
            M1JidzJOM2xxOWFma1F0T25rSmdkTQpVRzR4a1VIR3FzY2dnTURKQWdNQkFBR2pn
            Z0ZCTUlJQlBUQWRCZ05WSFNVRUZqQVVCZ2dyQmdFRkJRY0RBUVlJCkt3WUJCUVVI
            QXdJd0dRWURWUjBSQkJJd0VJSU9jMjEwY0M1bmJXRnBiQzVqYjIwd2FBWUlLd1lC
            QlFVSEFRRUUKWERCYU1Dc0dDQ3NHQVFVRkJ6QUNoaDlvZEhSd09pOHZjR3RwTG1k
            dmIyZHNaUzVqYjIwdlIwbEJSekl1WTNKMApNQ3NHQ0NzR0FRVUZCekFCaGg5b2RI
            UndPaTh2WTJ4cFpXNTBjekV1WjI5dloyeGxMbU52YlM5dlkzTndNQjBHCkExVWRE
            Z1FXQkJTYW5aQnZZK1JuajBIcXVKbWFlOUFKdndpQ3pUQU1CZ05WSFJNQkFmOEVB
            akFBTUI4R0ExVWQKSXdRWU1CYUFGRXJkQmhZYnZQWm90WGIxZ2JhN1locTZXb0V2
            TUJjR0ExVWRJQVFRTUE0d0RBWUtLd1lCQkFIVwplUUlGQVRBd0JnTlZIUjhFS1RB
            bk1DV2dJNkFoaGg5b2RIUndPaTh2Y0d0cExtZHZiMmRzWlM1amIyMHZSMGxCClJ6
            SXVZM0pzTUEwR0NTcUdTSWIzRFFFQkJRVUFBNElCQVFDVm9HQU9LWm9pbDRzTkFZ
            dmxiOXV4Tm1XcVFxeWgKcWwwRDFiZXdiTHhzM0RTVldTZTJEaFBqamhkTUhNVGNN
            cEIralF6QWJHeFZZaXVOTGRxTGwxWGNkZTdFVW1vMQpLSlVHelRPMDQ2aysxMUxZ
            Vk94RVhMQmU1czNGRituaUZKYnk3WEZnbUkzeU10NGJsSE41dEhtLzdKaWpMMUlw
            CnZrY3N5bk9uT3dBRUhlaEkxVTEyTjBKRXBrY29ldE02TUE4Y0d0bjc0RVBUYXM0
            TnBhK21UTm8zc2VIOGlZNDMKNEw0aG5zdWJYTWhjUVE5SVFNUHRLdVpZTlVYa2xO
            L05TMGY2OUJlKzNIUVJUT2xqdEN4ZHBtL3YvZW1IUGp3ZwovQ3d1KzU4ZlpLK2Zs
            UTFQUWNZMjRDZ3Q3RUYwUit1cW81SWwzQ0d1Q2dyZDRKeEpOTXVHY3NHUwotLS0t
            LUVORCBDRVJUSUZJQ0FURS0tLS0tCg==
            -----END CERTIFICATE-----
I noticed that the content within the CERT is different. Not sure if that is relevant.

I am not sure what the "store.connect()" does, based on the exceptions seems to be trying to make non-https connection which based on the documentation is not supported:
Unsupported Features
Alternative
Remote invocations with a transport protocol other than HTTPS (including plain text HTTP).
Not applicable.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Error: Failed to restore data position

We are running a report in the Crystal Reports Java runtime engine and receive the following:
"Error
Failed to restore data position, target: section = SectionCode;, printRecordNumber = 339, pageN = 2, result: section = SectionCode:, printRecordNumber = 399, pageN = 2"
The report includes header with formulas and logos, 3 sub reports, and a cross tab.
In case the cross tab has a small number of records and is printed in one page, there is no error. Once the cross tab has more records and requires another page to print, the error message is displayed.
The report data contains tables and an SQL command, all from one database.
This happens only on the runtime engine. When we run the report through Crystal Reports designer - no errors even if the cross tab requires 2 or more pages to print.
System:
Development: Crystal Reports designer 2008 SP3, ODBC, mySQL
Runtime: Java runtime engine (latest release from SAP's web site), JDBC, mySQL
Thanks,
Ori

Ori,
If the report runs in the CR design interface there isn't a CR issue. You should have better luck getting an answer to your question is you post it in the [Java - SAP Crystal Reports|SAP Crystal Reports, version for Eclipse; forum.
Also, take a look at this thread in regards to mixing commands and linked tables... [Multiple "command" connections to the database. Linking + Performance|Re: Multiple "command" connections to the database. Linking + Performance].
HTH,
Jason

Error: Failed to decrypt cert PFX data - distmgr.log

Similar Messages

Maybe you are looking for