Error filename measurement file
Hi.
In my project, I have used the Read Measurement File function to read .tdms file. When I run the program on another folder or another PC, then select Open file name an error occurred, error window appears. Although it did not do wrong program operation but It is very uncomfortable. So I hope how could this error window does not appear?
Thanks.
Solved!
Go to Solution.
Thanks for your answer - Proven Zealot.
I deleted all the Start Path and Filename. Now only the first Browser to open filename new error window appeared and notice that "Location is not available" - Access is denied. Then open filename next time isn't fail again. Error only appear once - the first read.
Attachments:
Read Measurement file.vi 34 KB
tdms_data.zip 342 KB
Similar Messages
-
Labview 9.0: Error 1 occurred at Write To Measurement File
Hi
Our University recently got the latest version of Labview (9.0 32-bit) which I installed today.The labview file I am using (my6008v6.vi) used to work fine with the older version (8.5 i think). My write-to-file VI is enabled at certain time intervals in order to log data. As soon as it is enabled for the second time I get the following error:
Error 1 occurred at Write To Measurement File->Copy of murray6008v6.vi
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
I made a simple file (simplew2f.vi) to test this, with a button which I can press to enable/disable the writing of data. I am able to start writing data and then stop writing data but as soon as I try resume the writing the same error occurs.
This confuses me greatly since this wasn't a problem using the old version and my Labview knowledge is minimal. Any help would be appreciated.
Attachments:
my6008v6.vi 214 KB
simplew2f.vi 64 KBSo, which VI are you having problems with? Sounds like both...
Okay... - sigh - where to start....
Well.. Let's start with a few comments.
1. Try to stay away from the Express VI. I know the Marketing guys at NI will not like me for saying so, but I am saying so. They are a nice marketing feature that Grumpy Old Men like myself do not like. They make it easy to write quick code.. And I will limit my comments to that. (It's not your fault.. )
2. The wiring on your diagram is not clear or easy to read. Yes, with additional time and double-clicking each wire I can tell where they are going. However, a rule of thumb, alway wire from Left to Right. Never right to left. And do not run the wires under objects, even the ones you are wiring to.
3. simplew2f.vi: You should put a small delay in the While Loop. I ran it three times and it wrote to the files without error. And yes, I used LV2009.
4. my6008v6.vi: Avoid wiring from the top of the While Loop. At frist, it looked like the data was coming out of the While Loop because the wires went to the left side of all the index node of the Index Array function.
You should set your Browse Option for the file path to "Files or Folders" and "New or existing". I did that and I was not getting the error message you described.
R
Message Edited by Ray.R on 03-03-2010 08:33 AM
Attachments:
pathProperty.PNG 13 KB -
Configuration "use next available filename" in "write measurement file" function
My project recording signal and saving using "Write to Measurement File" function. I want to perform record multiple segments signals should have configured option "use next available filename". For example, if the original file is data.tdms then it will save the file into: data_1.tdms, data_2.tdms, data_3.tdms, ...
To do that I use a button control enable and disable write functionality.
In the past I have done normally. Now, I can not make it anymore, now every write new data were add into one file created without the next new file as desired, it has almost become a option "Append to file".
I use LabVIEW 2013
Solved!
Go to Solution.
Attachments:
write measurement file.vi 54 KBHello ducta9,
It looks like you currently have the Write to Measurement File Express VI configured to "save to one file" - this means that all data from a given session will be saved to the same file. The file number will only be incremented once the application is restarted or the Reset Boolean input is set to True. If you want to save to a series of files, select the "save to a series of files" option and configure the Express VI as needed to generate new files at intervals.
If you want to write variable-size chunks of data to a new file every time the user clicks the Enable button, you might be able to get away with just wiring a True constant to the Reset. I would still recommend taking a look at the options available in the save to a series of files settings.
Best Regards,
Tom L. -
Error trying to write to a measurement file and then send via gmail.vi
So as the title says, I have a VI which is writing to a tdms file, and I want to send the file by gmail once the program has completed it's run. I downloaded gmail.vi and am integrating it into my existing code. Both my original code and the gmail VI work fine on their own, but when I try to have the combined VI send the data file by email, I get the error message that I've attached.
Basically, it seems like the .tdms data file is in use by the measurement code, and I need to know how to free it up so that the gmail code can attach and send it.
I've attached the main code as well as my modified gmail VI, so hopefully someone can take a look at tell me what I'm missing.
Any help is much appreciate!
Attachments:
Error.PNG 19 KB
PID Controller - Cleaned Up.vi 239 KB
Email Alert.vi 19 KBWhile I can't view all of your code because it is missing several SubVIs, I have a good idea of what you are trying to do. I believe the culprit is the "Write to measurement file" express VI. Near as I can tell the original reference to the TDMS file is being held open inside the express VI. Here's a good general rule for using Express VI's: when you see them, RUN THE OTHER WAY! I say because there is almost always a significant amount of code in there that is unnecessary, In this case, you simply need the Open TDMS file, Write to TDMS, Close file functions; you do not need all of the extra code that is in the express VI's.
<edit> P.S. I hope the username/password in Email alert.vi is a placeholder otherwise you just gave every idiot with access to LabVIEW your username and password to the account.
Charles Chickering
Architecture is art with rules.
...and the rules are more like guidelines -
problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
Get filename from list of measurement files
Hi,
I would like to have the user select from a list of measurement files and pass that name and path to the write to measurement file VI.
Ideally, when the data is written to the measurement file the user could add comments.
Any ideas?
Thanks
JoelHi Joel,
maybe your questions a too generic?
To select from a list of files you use the FileDialog (either ExpressVI or plain function) and it will give you a (full) path to the selected file.
To save "comments" with data you can use TDMS file functions which allow to set "properties" for channels of data.
To get more help than that you should better describe your problems and it's always a good idea to attach a VI of your tries to solve them...
Examples are found by the help menu in LabVIEW: simply start the example finder
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
I'm using the Express Write to LabVIEW Measurement File in LV7.1.
I have it set to "Save to one file" and have tried both "Overwrite file" and "Using next available file name" for the "If a file already exists" conditions.
The path/filename is passed into the function.
It works fine the first time around. If the file is deleted before the function is called again, an error occurs since LV is unable to find the file.
I have had to stop and re-run my program in order to write to use the function again.
Since I am able to delete the file I assume it was closed but it seems like LV expects it to be there, even though the function was supposed to create/open/close the file... Is there any way to reset this without stopping/restarting the program?
Since my application creates several files (only one using the Express VI) I am checking for the filenames and requiring that they be deleted (or a new filename be used) before acquiring data. Everything has worked great, except for the Express VI.
Thank you,
DavidOk, I've edited the VI you posted to reproduce my error (this time with 8.0).
I added a "master stop" and "start log" button. To demonstrate my problem:
1. Run the VI
2. Click "START LOGGING" - c:\test.txt is created
3. Click "STOP" - c:\test.txt is closed
4. Delete the file c:\test.txt with Windows shell or explorer
5. Click "START LGGING" - a new c:\test.txt file should be created but instead an error is raised in the Write LabVIEW Measurement File function.
Any ideas?
Thanks,
Dave
Attachments:
Write LV Meas File 2.vi 96 KB -
How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.
That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry -
Error of measurement and its propagation
This is merely a hint to developers of LabVIEW:
The "waveform" data accepts some variant additional information that is generally rarely used (e.g. not any graph shows NI_UnitDescription strings).
It would be a good idea to have some sort of "error of measurement" (or "measurement deviation") attached, e.g. as a constant and a multiplier or an additional waveform. This error should be propagated and re-calculated inside addition, multiplication etc. numerical elements, and should be displayed in graphs as a shade of final tolerance (or line width). This will help to estimate the quality of a measurement without much programming efford needed today.Hi,
the additional information for the waveform datatype is used for the tdms file format. You can store any information within this datatype to use it again e.g. in Diadem.
May I ask you to post your suggestion here. This is our idea exchange forum where users can post and rate ideas and suggestions for further versions of LabVIEW
Kind regards
Carsten
NI Germany -
Error while opening file from search result in SharePoint Server 2013
Hi All,
I have configured a file system search in SharePoint serve 2013, it is crawling the data and displaying in search result.
But while click on file to open, it gives error "Cannot find 'file://filesystemPath/filename'. Make sure the path or internet address is correct.".
I have given 'Everyone' to read and execute rights on shared folder (used in file system).
Please guide me.
Thanks in advance
Dharmender SharmaHi,
Please check whether this issue occurred on all files or a specific file from the shared folder.
1. If this issue occurred on a specific file, please check if the file exists in the shared folder, whether someone deleted it.
2. If this issue occurred on all files , please check the network and make sure the shared folder is online
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support -
Error while uploading file in BPS
Hi all,
I am getting an error while uploading file to BPS through web interface
I get a red stop button with error message : error while calling up RFC.
when i double click the red stop button, i get no long text but the error message I get is UPC 202
please advice me to resolve this issue.
many thanks in advance,
RaviThe informations are really not much to have an idea about the problem.
The problem can be located in the fm that calls the file because is trying to search the file on a system where there are some kind of problems in the communication between the systems involved to read and pass the file. Did u map the file name with logical filenames ? Very strange problem. Can you browse in the server where the file is located . Is it on your pc ?
Or, there is some problem in the datas provided, but this problem should arise more when you save than when you just press to load.
With this kind of imformations is very hard to have an idea. You need to debug to see what s going on
Regards -
Error ORA-01152: file 1 was not restored from a sufficiently old backup
Its also not thread just to share info with oracle gurus here.If my findings for the below workaround is wrong then please do correct me.
Sometime you get the error after performing restoring controlfile when you don't have autobackup controlfile on
error ORA-01152: file 1 was not restored from a sufficiently old backup
why?
Cause When you shutdown the database with using the normal,transactional or immediate options not abort a full checkpoint occurs.A full checkpoint ensures that all of the dirty blocks contained in the buffer cache are written to the data files,the database comes into synchronized state at this time i.e controlfile CKPT SCN=databasefile CKPT.
Like in this demo i am not taking backup the database in opened mode
Demo 1
SQL> archive log list
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 9
Current log sequence 11
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
SQL> alter database archivelog
2 /
Database altered.
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 9
Next log sequence to archive 11
Current log sequence 11
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN> connect target sys/sys
connected to target database: ORCL1 (DBID=1024798223)
RMAN> list backup
2> ;
using target database controlfile instead of recovery catalog
RMAN> backup database
2> ;
Starting backup at 08-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSAUX01.DBF
input datafile fno=00002 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\UNDOTBS01.DBF
input datafile fno=00004 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 08-DEC-07
channel ORA_DISK_1: finished piece 1 at 08-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NNNDF_TAG20071208T143558_3ONSCZBY_.BKP
comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 08-DEC-07
channel ORA_DISK_1: finished piece 1 at 08-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NCSNF_TAG20071208T143558_3ONSFGN7_.BKP
comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:05
Finished backup at 08-DEC-07
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.Now i delete the controlfile from OS command.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infoi don't have automatized control file backup neither i have control file copy.What i will do
to recover control file i will restore controlfile from backup.Before doing it that i will bring
the database in mount state.
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infoi have two backup piece in my backupset folder you cant check control file backup
existence with list backup controlfile at RMAN prompt cause it needs database in
mount state.You will have to test both backup set pieces.
RMAN> restore controlfile from
'C:\oracle\flash_recovery_area\orcl1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NCSNF_TAG20071208T143558_3ONSFGN7_.BKP';
Starting restore at 08-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL01.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL02.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL03.CTL
Finished restore at 08-DEC-07
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs
2 /
Database altered.You can see database now comes into open mode without raising error error
ORA-01152: file 1 was not restored from a sufficiently old backup,you can see that
database shutdown with immediate which synchronized the control file with database
file.
Demo 2
------------Now in this demo i am taking backup the database in opened mode before backup
database i have deleted alls previous backup.
Database is in opened moder if i take the backup in database opened mode
(i.e full checkpoint will not occur controlfile CKPT SCN<>datafile CKPT SCN)
you will get the error when you will restore controlfile from backup set.
error ORA-01152: file 1 was not restored from a sufficiently old backup
Reason is that CKPT SCN in the datafiles will be ahead of the backupset control file no
full checkpoint occuring. You are not taking backup in consistent state and the
backupset will not be in consistent state.When you will restore the control file from
backupset then yours restored control file SCN will be lesser then yours datafile
checkpoint SCN.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
Database opened.
RMAN> backup database
2> ;
Starting backup at 11-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.D
BF
input datafile fno=00003 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSAUX01.D
BF
input datafile fno=00002 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\UNDOTBS01.
DBF
input datafile fno=00004 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\USERS01.DB
F
channel ORA_DISK_1: starting piece 1 at 11-DEC-07
channel ORA_DISK_1: finished piece 1 at 11-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_11\O1_M
F_NNNDF_TAG20071211T125123_3OWJD0V5_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:56
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 11-DEC-07
channel ORA_DISK_1: finished piece 1 at 11-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_11\O1_M
F_NCSNF_TAG20071211T125123_3OWJFT97_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:09
Finished backup at 11-DEC-07now i shut down the database in order to delete the control file from os command
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> deleting the controlfile from oradata folder
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infonow i would restore the controlfile from backupset.
RMAN> restore controlfile from 'C:\oracle\flash_recovery_area\orcl1\ORCL1\BACKUP
SET\2007_12_11\O1_MF_NCSNF_TAG20071211T125123_3OWJFT97_.BKP'
2> ;
Starting restore at 11-DEC-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=159 devtype=DISK
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL01.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL02.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL03.CTL
Finished restore at 11-DEC-07
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs
2 /
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.DBF'what would you do that now you have lost controlfile ,you dont have copy either you dont
have autobackup on for controlfile,you need to create the control file
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> create controlfile reuse database orcl1 noresetlogs archivelog
2 MAXLOGFILES 50
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 300
5 MAXINSTANCES 8
6 MAXLOGHISTORY 500
7 LOGFILE
8 GROUP 1 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo01.LOG',
9 GROUP 2 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo02.LOG',
10 GROUP 3 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo03.LOG'
11 DATAFILE
12 'C:\oracle10g\oracle\oradata\orcl1\orcl1\SYSAUX01.DBF',
13 'C:\oracle10g\oracle\oradata\orcl1\orcl1\SYSTEM01.DBF',
14 'C:\oracle10g\oracle\oradata\orcl1\orcl1\UNDOTBS01.DBF',
15 'C:\oracle10g\oracle\oradata\orcl1\orcl1\USERS01.DBF'
16
SQL> /
Control file created.
SQL> alter database open
2 /
Database altered.KhurramNo need to manually recreate the controlfile. Simply issue RECOVER DATABASE prior to opening database.
E:\>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Dec 30 01:22:34 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup
Oracle instance started
database mounted
database opened
Total System Global Area 612368384 bytes
Fixed Size 2006192 bytes
Variable Size 239076176 bytes
Database Buffers 364904448 bytes
Redo Buffers 6381568 bytes
RMAN> backup database;
Starting backup at 30-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=148 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=E:\ORACLE\ORADATA\ORA10G\SYSTEM01.DBF
input datafile fno=00002 name=E:\ORACLE\ORADATA\ORA10G\UNDOTBS01.DBF
input datafile fno=00003 name=E:\ORACLE\ORADATA\ORA10G\SYSAUX01.DBF
input datafile fno=00004 name=E:\ORACLE\ORADATA\ORA10G\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 30-DEC-07
channel ORA_DISK_1: finished piece 1 at 30-DEC-07
piece handle=D:\DB_BACKUPS\12J4S23M_1_1.BKP tag=TAG20071230T012302 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:35
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 30-DEC-07
channel ORA_DISK_1: finished piece 1 at 30-DEC-07
piece handle=D:\DB_BACKUPS\13J4S26L_1_1.BKP tag=TAG20071230T012302 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
Finished backup at 30-DEC-07
RMAN> shutdown immediate
database closed
database dismounted
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
E:\>del e:\oracle\oradata\ora10g\*.ctl
E:\>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Dec 30 01:25:39 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup
Oracle instance started
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 12/30/2007 01:25:56
ORA-00205: error in identifying control file, check alert log for more info
RMAN> restore controlfile from 'D:\DB_BACKUPS\13J4S26L_1_1.BKP';
Starting restore at 30-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL01.CTL
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL02.CTL
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL03.CTL
Finished restore at 30-DEC-07
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 12/30/2007 01:27:33
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'E:\ORACLE\ORADATA\ORA10G\SYSTEM01.DBF'
RMAN> recover database;
Starting recover at 30-DEC-07
Starting implicit crosscheck backup at 30-DEC-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 1 objects
Finished implicit crosscheck backup at 30-DEC-07
Starting implicit crosscheck copy at 30-DEC-07
using channel ORA_DISK_1
Finished implicit crosscheck copy at 30-DEC-07
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 1 is already on disk as file E:\ORACLE\ORADATA\ORA10G\REDO03.LOG
archive log filename=E:\ORACLE\ORADATA\ORA10G\REDO03.LOG thread=1 sequence=1
media recovery complete, elapsed time: 00:00:02
Finished recover at 30-DEC-07
RMAN> alter database open resetlogs;
database opened
RMAN> shutdown immediate
database closed
database dismounted
Oracle instance shut down
RMAN> startup
connected to target database (not started)
Oracle instance started
database mounted
database opened
Total System Global Area 612368384 bytes
Fixed Size 2006192 bytes
Variable Size 247464784 bytes
Database Buffers 356515840 bytes
Redo Buffers 6381568 bytes
RMAN> -
Hi All,
I am beginer, sorry for stupid question
I saved a flash file from the internet by the program "Save
Flash" the extention is swf.
Now when I try to open the file a get an error message in
Output tub :
"Error opening URL 'file://filename and path/undefined"
Can someone please help.
Thanks
Shaulhow are you trying to "open" the file?
-
Error in reciever file adapter , where i am getting file name dynamically
hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE -
Error 1311, Source file not found, measurementstudio5.cab
I'm installing Measurement Studio for Visual Studio 6.0 and I encounter: Error 1311 Source file not found, measurementstudio5.cab
Any ideas?Hello David,
I am also experiencing an Error 1311, but during the install of LabVIEW 2012 and 2013 (64-Bit).
Win7 x64, Acer laptop.
First problem I encounter is:
After putting in my info and agreeing to the licence agreements, the first error pops up says the followign:
NI LabVIEW Run-Time Engine 2011 SP1:
Error 1310. Error writing to file: Crogram Files (x86)\Internet Explorer\Plugins\LV2011ActiveXcontrol.dll. Verify that you have access to that directory.
Options: Abort/Retry/Ignore
Things I've tried:
Retry button--never get's past the error.
Uninstalling Internet Explorer and restarting--Still assumes that it's there, and error remains.
Reinstalling updated Internet Explorer and restarting -- no change.
Checking the directory file and verifying that permissions for every user and System is set to full control -- No change.
The only way to get past this error seems to be to press the Ignore button.
A few moments after ignoring the first error, another error pops up. It says:
NI Labview Run-Time Engine 2011 SP1:
Error 1311. Source file not found: C:\Users\[my U/N]\Desktop\National Instruments Downloads\LabVIEW 64-bit\2013\Products\LabVIEWruntime_mft.cab. Verify that the file exists and that you can access it.
Options: Retry/Cancel
Things I've tried:
Verifying that the file exists (it does) and that I have access to it (I do) and checking the permissions to verify full control --no changes.
Retry -- does nothing.
Cacel --aborts the installation and indicates instal failure.
Can you help me with this? I've installed LV on two other computers and they worked fine, but my laptop simply doesn't want to take the install.
Thank you in advance,
Thomas
Maybe you are looking for
-
Does the shuffle only work with itunes
Hi again, I found out how to go to manual sync mode or at least I think I did! It is go to edit then preferences then sync disable. Then I went back to Real Player and tried to get some songs from my library, well it showed that they were all downloa
-
What is this symbol on my BB - please help
I apologize for this, but it's driving me nuts trying to figure this out. There's a symbol that occassionally shows up on the top of my BB's LCD screen (where all the other info is listed like the time, new message alerts, etc...) that I can't figur
-
Is it a safe to install DFS namespace service to an Active Directory Server?
Hi All, Is it safe and/or best practice to install a DFS namespace server to a server that runs an Active directory services? I have read a blog in which, as much as possible, active directory server should only run the directory services and no othe
-
How to show the VALUE as the Column Header using SQL query?
Hi I have a requirement to show the picked value as the column header using SQL query. Example: ====== SELECT EMPNO FROM EMP WHERE EMPNO=7934; Result Should be: 7934 7934
-
Hi, We just upgraded from EP6 to EP7 and want the refresh button back in UWL. Implemented the following: <Action name="refresh" groupAction="no" handler="UIActionHandler" referenceBundle="refresh" returnToDetailViewAllowed="yes" launchInNewWindow="no