Error for Search Configuration Tree

Hi,
On ATG 10.0.3, trying to setup Search Configuration for Result Redirection & Result Positioning as per ATG doc
http://docs.oracle.com/cd/E22630_01/Platform.1002/pdf/ATGMerchandisingBusinessGuide.pdf
Chapter #16 : Defining Search Configurations
Topic : Creating Search Configurations
Page #161
Since "Base Search Configuration" is optional so directly trying to create "Search Configuration Tree" through "Administer Commerce Search" project or "Manager Commerce Assets" projects in under Merchanding tab in BCC. Getting error as following: I guess some configuration is missing.Any solution?
Encountered null property value:
component= /atg/search/web/assetmanager/SearchConfigFormHandler
path= /atg/search/web/assetmanager/SearchConfigFormHandler.fieldRankingProperty.weighting
null property= fieldRankingProperty
Encountered null property value:
component= /atg/search/web/assetmanager/SearchConfigFormHandler
path= /atg/search/web/assetmanager/SearchConfigFormHandler.relevanceRankingProperty.weighting
null property= relevanceRankingProperty
Any help is appreciated.
Thanks in advance!
Mani
Edited by: user11263665 on Jul 27, 2012 1:12 PM

Hi Mani,
Were you able to fix this issue? I am also facing the same errors. I have no clue why am getting the error.
Regards,
Thiyagarajan

Similar Messages

Giving error for NearCache Configuration-java.lang.IllegalArgumentException

Hi,
I tried to use near cache topology but it is giving the below error(I am unable to masp the near cache)
java.lang.IllegalArgumentException: Unresolved reference to scheme:
example-local
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:840)
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:893)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:130
6)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:294)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.coherence.component.application.console.Coherence.doCache(Coherence.CDB:18)
at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:209)
at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:37)
at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
I given the below configuration in the cache server side....
<caching-scheme-mapping>
     <cache-mapping>
<cache-name>NearCache</cache-name>
<scheme-name>example-near</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
     <scheme-name>example-near</scheme-name>
     <front-scheme>
     <local-scheme>
     <scheme-ref>example-local</scheme-ref>
     </local-scheme>
     </front-scheme>
<back-scheme>
     <remote-cache-scheme>
     <scheme-ref>example-remote</scheme-ref>
     </remote-cache-scheme>
</back-scheme>
</near-scheme>
<remote-cache-scheme>
<scheme-name>example-remote</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>localhost</address>
<port>9099</port>
</socket-address>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30s</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
PLease provide the configurastion for the nearcache topology....
Thank you.

You are missing the example-local
<local-scheme>
<scheme-ref>example-local</scheme-ref>
</local-scheme>
for example,
<local-scheme>
      <scheme-name>example-local</scheme-name>
      <eviction-policy>HYBRID</eviction-policy>
      <high-units>{back-size-limit 0}</high-units>
      <unit-calculator>BINARY</unit-calculator>
      <expiry-delay>{back-expiry 1h}</expiry-delay>
</local-scheme>Examples can be found in the coherence.jar that contains coherence-cache-config.xml

Page not found error for search results

I have a site search recipe that worked perfectly on a previous site. I’ve created a new search for a different site following the same recipe. I must be missing something though, because I am getting a page not found error.
Here is the code that worked before:
<form name="catsearchform32891" method="post" action="http://corehog.businesscatalyst.com/Default.aspx?SiteSearchID=3770&PageID=15863972" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://corehog.businesscatalyst.com/images/search-button.png" class="cat_button" /></div></form>
Here is the new site search:
<form name="catsearchform12233" method="post" action="http://greenprideinc.com/Default.aspx?SiteSearchID=3936&PageID=1661214" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://greenprideinc.com/images/search-button-n.png" class="cat_button" /></div></form>
Any suggestions on what I’m doing wrong?

I just noticed one simple thing. I do not know its bug or what.
After sign in the page is getting redirected to :
https://creative.adobe.com/#files
where I am getting error saying that page not found.
I tried to add '/ ' after that and it works.
https://creative.adobe.com/#files/ <<< like this.
I guess some link issue or redirecting issue.

SQL error for searches within Arch forums

Hi guys,
Since last night, when ever I try to run a search, whether it be a pre-defined search like New Posts or last 12h, or a keyword search within the search page, I get an error:
Could not delete old search id sessions
DEBUG MODE
SQL Error : 1016 Can't open file: 'phpbb_search_results.MYI' (errno: 145)
DELETE FROM phpbb_search_results WHERE session_id NOT IN ('b8a882a76bd524ca2cae00763907813a', 'ff63868080729e0ee81c83f1e2b08fac', '153ae6e2b7dfa3b1acab764caf6251a9', '61230f3df774fc9e05bbd91b9de8ab6a', 'ebea35cab271f97e47a0edeb867f350b', '852bae4b6e661b50c6e656eacab5204f', '874a6ac043dfb52bd2162d92f3700b28',
... (goes on for ages) ...
'eb520a66784db4079cf64fbf16316d65', '9f2f2ebe525f98222e32c1cefffd7ea1')
Line : 663
File : search.php
This is rather annoying as I can't look for the latest posts easily.

There's already a discussion about it here:
http://bbs.archlinux.org/viewtopic.php?t=17004
Locking to keep continuity.

Javascript error for detailed navigation tree : 't' is undefined

Hi everybody,
I have a problem on my anonymous role. When i click on the link page of a km navigation IView in the detailed navigation tree, the IView open itself but the navigation tree disappear and i have a Javascript error :
Error : 't' is undefined.
Code : 0
URL : http://localhost:50000/irj/portal/anonymous?standAlone=true&buildTree=false&NavPathUpdate=false
Could somebody help me please ?

Sorry but it's the same result.
Anybody else?
Somebody could say me if i modify the parameter of the URL somewhere?
http://portal:50000/irj/portal/anonymous?standAlone=true&buildTree=false&NavPathUpdate=false&windowId=WID1182328037651
I talk about the parameter buildTree or NavPathUpdate.
These parameters are added when ai click on the link of the tree.

Back-end communication error for r/3 parameter search

Hello everyone,
Have been facing this problem for sometime now.When i was clicking on <b>'binoculars/search'</b> find to check for account assignment on web gui,i was getting this error "display not possible...inconsistency in input help" error.
I did configuration setting in 'define back-end' system(defined the last column of rfc destination), and the error disappeared and is working fine in sandbox.
Now when i do the same in development system,'inconsistency' error no longer pops up but another one pops up saying <b>"error while communicating with the back-end system..inform system admin."</b>
Just to let you all know,<u><i><b>i am able to create back-end documents</b></i></u>...it is just when i am trying to use "binoculars/find" in account assignment...the 'backend communication error pops up.
I have tried everything possible..checked all attributes..everything is fine.
Can someone assist me?I must be missing something very simple...plz suggest.
Full points guaranteed:))!!!
Priya

Priya-
Are you certain the RFC destination you have defined for search helps has proper authorizations? See OSS note 656633 - <a href="https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000120122003">OSS 656633</a>
Regards-
b

Crawl log error in sharepoint 2013 for search services

Dear Support,
please find below mention crawl log error in sharepoint 2013 for search services.
8,597 The server is unavailable and could not be accessed. The server is probably disconnected from the network.
423 This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also
want to crawl this repository during off-peak usage times.
59 Processing this item failed because of a timeout when parsing its contents.
11 The filtering process has been terminated
4 SharePoint returned an empty response.
3 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly.
2 The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.
would request your support for resolving this type of issue

1. Are you able to browse the sites on SP server. server is unavailable means that application pool
of that site is down. Check application pool on all server. if you start any application pool. make sure it does not stop few minutes later. you need to update password if it does stop
2. Create a disable loopbackcheck of registry on all servers
http://blogs.technet.com/b/sharepoint_foxhole/archive/2010/06/21/disableloopbackcheck-lets-do-it-the-right-way.aspx
http://support.microsoft.com/kb/926642/en-us
3. Create a new search service application and check if you face same issue.
4. I assume you have change some password or other setting when you started facing this issue. what changes were made in environment
If this helped you resolve your issue, please mark it Answered

Error during search for WM movement type (911)

Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advance

The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman

Error in the configuration for sap logon tickets

Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
Shridhar

You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren.

Error during search for WM movement type (999 E )

Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arif

Hi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari

Search Configuration For Endeca Workbench-3.1.0

Hi,
Please let me know how to configure Stemming and Stopwords for search in Endeca Workbench version 3.1.0 [Experience Manager] .
Thanks in Advance!!
Mallikarjun

Hi,
from the Advanced Dev Guide (you should find that documentation on Oracle Doc website) :
- Enabling stemming
Stemming is enabled in Developer Studio.
To enable stemming for one or more languages in your project:
1. Open the project in Developer Studio.
2. In the Project Explorer, expand Search Configuration.
3. Double-click Stemming to display the Stemming editor.
4. Check one or more of the language check boxes on the list.
5. Click OK.
To disable stemming, use the above procedure, but uncheck the languages for which you do not want
stemming.
- Stopwords are defined using ex-Workbench new Experience Manager (when you logg into you application you have a feature dedicated for that)
hope that helps
regards
Saleh

Error in Contract: "Configuration for product is missing"

Hi Experts,
I have a problem with configurable products in CRM 7.0.
I defined a product like configurable setting the flag "Configurable Product" in material master data.
Also, using the "Product Models" functionalities, I created a very simple configuration for my product, adding a set of selectionable characteristics.
So I tried to create a Contract and I inserted in "Item" assignment block my configurable product. The result was that the system gave me the error "Item 10: Configuration for product is missing".
I hoped to find in Contract the configuration that I set for my product.
I think that I lost a step, but I don't know where.
I hope in your help.
Thanks and regards.
Massimiliano.

I solved the issue.
I had a lot of errors on my quotation. To see the configuration I needed to solve all the errors before.
Thanks a lot at all.
Massimiliano.

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

NETCA listener configuration error for RAC database

Hi,
WE have a RAC setup on 2 nodes and now we want to change the default listener port for RAC database.
Database ver: 10.2.0.4
We now that srvctl does not work to add listener manually to CRS.
We are now using netca to create new listener on both the RAC nodes but it gives error throwing :
Problem in configuration : Node(S): hostname
Try again...
When we try to start the listener say listener_I it throws following error:
Problem in configuration :node1
Listener start to failed:Listener may already be running
CRS-0215:Could not start resource
This is urgent
any help is appreciated.
Regards,
Milan

user12073248 wrote:
How you fix it? write to [email protected]
Hi Mauricio,
In this forum we help for free regardless of priority.
First you try to help in the forum if the author of the post request your e-mail you give to him.
Hope you understand it.
Thanks in advance for doing your part to make this community as valuable as possible for everyone!
Levi Pereira

Getting Java error While click on Test model for New configuration.

From ” Configurator Administrator responsibility” we use the below link and getting Java Error:
Log in -> Configurator Administrator responsibility -> Configurator Developer -> Simple Search -> Item Name: r100s -> Click Edit -> Click Test Model -> select Start New Configuration -> Click Next -> select Model UI -> Click Finish -> get java.lang.NullPointerException.
If any body have encountered the same error , Please let me know the solution.
Regards,

Below is the Error:
[Dec 1, 2009 9:48:51 AM GMT+00:00]:1259660931381:Thread[Thread-127,10,main]:1467:85913090:essapdu31z1.emrsn.com:10.236.93.46:27619:27620:EXCEPTION:[cz.servic
e.ConfiguratorServiceLocal.From processMessage()]:[null_3a1685d_2 # 31] null
java.lang.NullPointerException
at oracle.apps.cz.service.ConfiguratorService.fetchModeldata(ConfiguratorService.java:1708)
at oracle.apps.cz.service.ConfiguratorService.processMessage(ConfiguratorService.java:447)
at oracle.apps.cz.service.ConfiguratorServiceLocal.onMessage(ConfiguratorServiceLocal.java:18)
at oracle.apps.cz.runtime.PageController.postServiceMessage(PageController.java:535)
at oracle.apps.cz.runtime.PageController.fetchModelData(PageController.java:707)
at oracle.apps.cz.runtime.oa.server.CZApplicationModuleImpl.submitDataRequest(CZApplicationModuleImpl.java:954)
at oracle.apps.cz.runtime.oa.webui.AbstractMainPageController.getModelData(AbstractMainPageController.java:547)
at oracle.apps.cz.runtime.oa.webui.AbstractMainPageController.loadPageStructure(AbstractMainPageController.java:2313)
at oracle.apps.cz.runtime.oa.webui.MainPageController.processRequest(MainPageController.java:65)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
Regards

Error for Search Configuration Tree

Similar Messages

Maybe you are looking for