Error for visual ADF from xml code behind

Hello all:
I am a freshman to use Jdeveloper 10.1.3.1.
When I was using faces-config.xml to create JSP and JSPX page, the ADF component control suddenly diplayed abnormally, Only to show the tagbox like form, html, head, body and so on in Design view, sometimes even nothing to display,.But when I restart jdeveloper, some page would be OK again, others still can not be show normally. I checked the code behind the page.there is nothing wrong, because these codes are all auto-created.
Thanks to advance
Bonnie([email protected])

I have solved this problem.
Because I added a filter into web.xml. It seemed that this would be complied while in design model. After I removed it, it's OK!

Similar Messages

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

AR can't be added-Error "Failed to load from XML resource"

Hi Everyone,
I need help with this error. When entering an item and then tabbing in an AR document, this code appears.
"Failed to load from XML resouce".
Thanks,\
Debbie

Hello experts,
I am facing this issue in SBO 9.0 PL 08.
Using SBOdemoUS, clic 'Duplicate' an existing Sales Order, then select a Business Partner, and hit 'yes' to the question in order to refresh rows with new BP info. You will get red bar error 'Failed to load from XML resource - (UI_API 7004) [Message 66000-6]' and it wipes out all the copied rows info. Does not happen with BPs that don't have default Ship To info.
Your advise please.
Thanks

"Object Required" error when using the script block from the code behind

I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

Error when loading data from xml file

Hi,
I'm trying to load data into a table from XML file using ApEx DATA UNLOAD/LOAD interfaces .
ApEx version is 3.0.1 .
I'm getting this error:
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
How to find cause of the error ?
Janus

Tkank you for the simple but good advice :)
unfortunately even google didn't find many answers :
LPX-00222 + APEX ... NOTHING
LPX-00222 + ORA- ... 2 pages of something like
"Examine the additional error messages and take corrective action"

ORA-20100: Error occurred while parsing (from xml in custom schema)

Hi,
I am using xmlParser and xmlDom to extract information from xml document. My whole process works perfectly in the APPS schema on the Oracle e-Business Suite. The minute I move it to a custom schema (ie new User) I get this error.
ORA-20100: Error occurred while parsing: Element '' used but not declared.
This only occures at runtime. I am pretty sure I grant the correct SELECT and EXECUTE privileges to this Schema. If I hadn't then it would not compile. It compiles without errors on the Database.
Any help will be appreciated.
Thanks in advance.
Regards
Dave

I just tried this again. I have Oracle9i 9.0.1.1 on my Windows
2000 laptop.
I went to OTN and downloaded the XDK 9.0.2D for PL/SQL
I used loadjava to load the \oracle\ora90\rdbms\jlib\xdb_g.jar
file into the database (shouldn't have had to do this) into the
XMLBOOK account. Filed a bug for needing to do this by hand.
I ran "xdkload.bat" with xmlbook/xmlbook as the username/password
I made sure the proxy server name was set correctly in the
example (if you don't need a proxy server, comment out that line
in the parse_xml_news.sql example, or that could cause your
error!!)
I ran the parse_xml_news.sql script, and I get:
Top Stories on XML from Moreover.com on December 21st, 2001
( 1) CEO highlights Mercator Softwares single biggest opportunity
( 2) WWRE Chooses webMethods
( 3) WebMethods, retail exchange ink deal
( 4) Worldwide Retail Exchange Chooses webMethods
( 5) Worldwide Retail Exchange Chooses webMethods
( 6) WorldWide Retail Exchange choses webMethods for integration
( 7) XML: Wherever You Go, There You Are
( 8) Chap. 13: Metadata
( 9) Enterprise Adoption of XML Made Simple
(10) XML Databases
(11) Using CSS2 to display XML documents
(12) How XML could bring an end to all of your troubles
(13) Effort Launched To Bring Classic Macs Rich Metadata To Mac
(14) Sneak attack on Pearl Harbor roused publics anger, resolve
(15) Drug dogs whiff worth $230,000
(16) PORTLAND Police target
(17) 11-year-old cant seem to get out of jury duty
(18) Another casualty of war: Proposed waterfront museum
(19) webMethods Establishes Sales Operations in Brussels
(20) Using Emacs for XML documents
(21) Gates: XML could be everything we dreamed...
(22) XML: The end of all your troubles?
(23) Java XML
(24) Tool To Compare XML Files
(25) Fairfax County Sends webMethods to School
(26) webMethods Embraces Web Services
(27) WebMethods Supports Web Services
(28) Accessing metadata through Reflection
(29) When format is foremost
(30) Views from Abroad: XML Pipelines and Delta XML

Error while importing data from XML file to a Oracle database

I am getting the following error while importing data
*** atg.xml.XMLFileException: No XML files were found for "/Dynamusic/config/dynamusic/songs-data.xml".
The files must be located under the name "/Dynamusic/config/dyna
*** java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
java.io.FileNotFoundException: D:\MyApp\ATG\ATG10.0.3 (Access is denied)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:120)
        at atg.adapter.gsa.xml.TemplateParser.importFiles(TemplateParser.java:6675)
        at atg.adapter.gsa.xml.TemplateParser.runParser(TemplateParser.java:5795)
        at atg.adapter.gsa.xml.TemplateParser.main(TemplateParser.java:5241)
I have placed the FakeXADataSource and JTDataSource properties files as required. In fact I have been able to import data in all machines. Just this one machine is giving problems. I have also checked out the access rights. Can someone help me please?

Confirm that you have access to D:\MyApp\ATG\ATG10.0.3 and existence of Dynamusic/config/dynamusic/songs-data.xm

Error when reading data from XML using JAXB?

Hi all,
I get the error message when reading data from XML using JAXB.
[org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
(AbstractUnmarshallerImpl.java:315)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
     at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
I don't find the reason, please help!
Thanks in advance!

The problem is sovled.

Javascript - Object required error for visual studio 2010

Hi - I have downloaded the crystal report RTM for visual studio 2010.
My App server is windows 2008.
We are using crystal reports as part of CRM application
I am getting javascript error 'Object Required' at the following line:
The debugger after the error message refers to this:
bobj.crv.stateManager.setComponentState('ctl00_ContentPlaceHolder2_CrystalReportViewer1__UI',eval('('document.getElementById('__CRYSTALSTATEctl00$ContentPlaceHolder2$CrystalReportViewer1').value')'));
The website has all the required aspnet_client files and have made sure the application is able to load them.
When tried with a new sample solution the reports work.
Please help. I need to make the crystal reports work with the CRM solution...

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
Dear Gurus Please help me

You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
See:
For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
Regards,
Ronald

Error in determining Paper Format for Printout triggering from ABAP Code

Hi Experts,
I am trying to trigger a printout from my ABAP code using "NEW-PAGE PRINT ON ...... NEW-PAGE PRINT OFF" statement.
I am passing the Print Parameters using the FM "GET_PRINT_PARAMETERS" as below:
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        destination    = ls_options-tddest
        copies         = 1
        list_name      = 'Notification'
        list_text      = 'ERROR NOTIFICATION'
        immediately    = 'X'
        release        = 'X'
        new_list_id    = ' '
*        expiration     =
        line_size      = 79
        line_count     = 23
        layout         = 'X_65_80'
        sap_cover_page = ' '
        receiver       = 'SAP*'
        department     = 'System'
        no_dialog      = 'X'
      IMPORTING
        out_parameters = lv_params.
But I am facing a problem. Though I am passing X_65_80 to the LAYOUT in the Function Module, it is trying to print in LETTER format. But the specified printer as the printer supports only A4 paper format and as a result, I am not getting any printout.
Kindly help me with your suggestions to resolve this.
Thanks in advance.
Regards,
Keerthi

Hi,
I just found that this problem is even stranger.
I am able to print the said message on my local printer but when I try to print the same message on a different printer located at a different location, the printout does not get triggered. I am not getting any error messages also in this case.
What could be the possible reason for this?
Kindly share your views/experience with me on this one.
Thank you.
Regards,
Keerthi

Show errors on UIX page from Java code?

Hello all:
I've got a simple Login page in Jdev 10g (9.0.5.2) that I'm setting up. The basics work fine -- if I type in a valid login/password, it works. If I type in an incorrect login/password, it loops back to the login page. The problem is that I can't seem to get my Invalid Login error message to appear.
The loginPage.uix is based on a template. The template contains the following code:
<messages>
<messageBox automatic="true" />
</messages>
as a named child inside a <pageLayout> UIX node. The login page is:
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:pas="http://www.paslists.com/pas/templates"
expressionLanguage="el">
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="pasPageLayout.uit"/>
</templates>
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui" >
<contents>
<document>
<metaContainer>

<head title="PAS Login Page"/>
</metaContainer>
<contents>
<body>
<contents>
<pas:pasPageLayout selectedGlobalHeader="3">
<contents>
<stackLayout>
<contents>
<spacer height="10"/>
<styledText text="Please enter your Web ID and Password, then press the Log In button."/>
<spacer height="10"/>
<flowLayout>
<contents>
<styledText text="If you don't have an ID, please send an e-mail to our "/>
<link destination="mailto:[email protected]" text="Web Administrator" />
<styledText text=" requesting one."/>
</contents>
</flowLayout>
<spacer height="10"/>
<form name="loginForm" method="POST">
<contents>
<labeledFieldLayout labelWidth="25%" fieldWidth="80%" columns="2" width="80%" >
<contents>
<messageTextInput prompt="ID:" name="username" columns="20" />
<messageTextInput prompt="Password:" name="password" secret="true" columns="20" />
</contents>
</labeledFieldLayout>
<rowLayout hAlign="right">
<contents>
<submitButton text="Log In" formName="loginForm" event="goLogin"/>
<spacer width="10" />
<resetButton text="Reset" formName="loginForm" />
<spacer width="10" />
</contents>
</rowLayout>
</contents>
</form>
</contents>
</stackLayout>
</contents>
<start>
<flowLayout>
<contents>
<sideNav selectedIndex="0">
<contents>
<link destination="login.do" text="Logging In"/>
<link destination="logoff.do" text="Log Off"/>
</contents>
</sideNav>
</contents>
</flowLayout>
</start>
</pas:pasPageLayout>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

<event name="goLogin">
<go name="login"/>
</event>
</handlers>
</page>
My Java code is:
public class LoginAction extends DataAction
public void findForward(DataActionContext actionContext) throws Exception
HttpServletRequest request = actionContext.getHttpServletRequest();
HttpSession session = request.getSession();
ActionErrors errors = actionContext.getActionErrors();
String target = "fail";
//Get the result of the Model Method Call
JUCtrlActionBinding method = actionContext.getCustomMethod();
boolean successfulLogon = ((Boolean)method.getResult()).booleanValue();
Integer attempts = (Integer)session.getAttribute("loginAttempts");
int intAttempts = 0;
if (attempts != null)
intAttempts = attempts.intValue();
if (!successfulLogon || intAttempts > 3)
// If the Logon fails we need to do the follwoing
// 1. Increment the counter. Once this exceeds 3 any logon will fail
// 2. Create an error message to display on the logon screen.
// Be sure that this is non-specific so crackers can't tell if
// a portion if the username is correct or that there is a
// Max attempts value.
session.setAttribute("loginAttempts",new Integer(++intAttempts));
errors.add("InvalidLogin",new ActionError("loginerr.invalid"));
actionContext.setActionErrors(errors);
else
session.setAttribute("loginStatus", new String("true"));
target = "success";
actionContext.setActionForward(target);
This goes to a "success" actionForward if the login works and a "fail" actionForward if the login fails.
My ApplicationResources.properties file contains:
loginerr.invalid=Invalid username/password. Please try again.
This matches up with the key I used in the new ActionError() statement above.
My structs-config.xml for this section looks like this:
<action path="/mainAction" className="oracle.adf.controller.struts.actions.DataActionMapping" type="oracle.adf.controller.struts.actions.DataAction" name="DataForm">
<set-property property="modelReference" value="loginUIModel"/>
<forward name="success" path="/loginPage.do"/>
<forward name="login" path="/loginAction.do"/>
</action>
<action name="DataForm" path="/loginAction" className="oracle.adf.controller.struts.actions.DataActionMapping" type="com.paslists.view.LoginAction">
<set-property property="modelReference" value="loginUIModel"/>
<set-property property="methodName" value="loginUIModel.login"/>
<set-property property="resultLocation" value="${requestScope.methodResult}"/>
<set-property property="numParams" value="2"/>
<set-property property="paramNames[0]" value="${param.username}"/>
<set-property property="paramNames[1]" value="${param.password}"/>
<forward name="fail" path="/mainAction.do"/>
<forward name="success" path="/getHomePageAction.do"/>
</action>
<action name="DataForm" path="/loginPage" forward="/loginPage.uix" validate="false"/>
mainAction has a success forward to loginPage.uix. loginPage.uix has a "login" event attached to the submit button, which forwards to loginAction. loginAction executes the code declaratively and forwards to success or fail. If success, it continues on. If fail, it loops back to mainAction.
Again -- this all works (almost). The only thing that does not work is that my ActionErrors() are not displaying on the web page.
What am I doing wrong here?

Solved my own problem. See the following thread for the answer:
Displaying Struts messages/errors in 10g
I modified my error code to be:
actionContext.getActionErrors().add(ActionErrors.GLOBAL_ERROR,new ActionError("loginerr.invalid"));
this.saveErrors(request,actionContext.getActionErrors());
I modified my template to contain:
<struts:dataScope xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<contents>
<messageBox messageType="error" automatic="true"/>
</contents>
</struts:dataScope>
I also added xmlns:struts="http://xmlns.oracle.com/uix/struts" to the templateDefinition.
It now works.

Errors generating Java classes from XML schema

I received the following errors when generating Java classes from the schema located at: http://imsproject.org/xsd/ims_qti_rootv1p1.xsd and http://imsproject.org/xsd/ims_xml.xsd
XML Spy v4 claims that the schema is well-formed and valid. Could this be a problem with the class generators, or is XML Spy not telling the truth?
Thanks.
D:\IMS_QTI\Java>java -classpath .;lib/xmlparserv2.jar;lib/xschema.jar;lib/classgen.jar oracle.xml.classgen.oracg -schema ims_qti_rootv1p1.xs
d -outputDir src\com\icld\qti -package com.icld.qti -comment
file:/D:/IMS_QTI/Java/ims_qti_rootv1p1.xsd<Line 235, Column 21>: XSD-2209: (Error) Duplicated definition for: 'attr.view'
file:/D:/IMS_QTI/Java/ims_qti_rootv1p1.xsd<Line 303, Column 21>: XSD-2209: (Error) Duplicated definition for: 'grp.labels'
file:/D:/IMS_QTI/Java/ims_qti_rootv1p1.xsd<Line 1834, Column -12236>: XSD-2209: (Error) Duplicated definition for: 'qtimetadatafield'
file:/D:/IMS_QTI/Java/ims_qti_rootv1p1.xsd<Line 1834, Column -9642>: XSD-2209: (Error) Duplicated definition for: 'typeofsolutionType'
file:/D:/IMS_QTI/Java/ims_qti_rootv1p1.xsd<Line 2252, Column -3019>: XSD-2026: (Error) Invalid attribute 'use' in element 'attribute'
Error: Schema Class Generator failed to generate classes. oracle.xml.parser.schema.XSDException: Duplicated definition for: 'attr.view'

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jinyu Wang ([email protected]):
Which version are you using? I can't reproduce the error with 9.0.2B version.<HR></BLOCKQUOTE>
Thanks for having a look at the problem. I am using the 9.0.2.0B version with Java 2 Standard Edition Build 1.3.1-b24. The classgen -version option returns 9.0.2.0b-beta - and xmlparserv2.jar and xschema.jar are from the same distribution. Running the corresponding DTD from the same source work fine - I'm just havinf this problem with the XSD. Anything else I should look at?

Javascript error for Inserting Pages from a source

Below is a script I wrote that isn't functioning properly on my large 200 page document that I need it to. Granted there might be a much easier way to script this, but I'm no expert. I have a 200 page document that needs to be 600 pages, basically every page needs to be copied twice (and obviously placed right after the original. So I have the original PDF, then I copied that PDF to use as a source document to copy from. (To clarify if I'm not being clear, the first 3 pages would be page 1, 2, 3,... it needs to be: 1,1,1,2,2,2,3,3,3 etc)
var targetpage = 0;
var sourcepage = 0;
while(sourcepage < 199)
    this.insertPages({
        nPage: targetpage,
        cPath: "source.pdf",
        nStart: sourcepage,
        nEnd: sourcepage
    targetpage++;
    this.insertPages({
        nPage: targetpage,
        cPath: "source.pdf",
        nStart: sourcepage,
        nEnd: sourcepage
    sourcepage++;
    targetpage=targetpage+2;
It gives me an error that I have no idea means, nor how to correct after only placing a total of 3 pages - so the doc went from 200 to 203 (2 of page 1 as intended, then 1 page of page 2, then for some reason it stops...
InvalidArgsError: Invalid arguments.
Doc.insertPages:9:Batch undefined:Exec
Why is it stopping? And please don't assume I know what I'm doing Thank you.

Have you read the Acrobat JS API Reference about the insertPages and the path value and restrictions?
insertPages now needs to use the "privileged context" when not being run as a console or batch event.
Safe path
Acrobat 6.0 introduced the concept of a safe path for JavaScript methods that write data to the local hard drive based on a path passed to it by one of its parameters.
A path cannot point to a system critical folder, for example a root, windows or system directory. A path is also subject to other unspecified tests.
For many methods, the file name must have an extension appropriate to the type of data that is to be saved. Some methods may have a no-overwrite restriction. These additional restrictions are noted in the documentation.
Generally, when a path is judged to be not safe, a NotAllowedError exception is thrown (see Error object) and the method fails.

BAPI_GOODSMVT_CREATE - error for movement type 343 (movement code - 04)

Hi Gurus,
I am using BAPI_GOODSMVT_CREATE for doing transfer posting MB1B.
I need to do transfer posting using movement type - 343 "Blocked to Unrestricted stock"
Movement type - 343
GOODSMVT_CODE - 04 (transfer posintg)
I am getting error message -
E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
Help me with some pointers.
Thanks,
Madan

Rajesh,
Here is my code for line items:
MATERIAL                       100001374
PLANT                          1AAE
STGE_LOC                       B100
BATCH                          0111331309
MOVE_TYPE                      343
ENTRY_QNT                                10.000
ENTRY_UOM                      EA
Let me know should I need to fill any other fields.
Thanks,
Madan

Error for visual ADF from xml code behind

Similar Messages

Maybe you are looking for