Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
Dear Gurus Please help me

You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
See:
For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
Regards,
Ronald

Similar Messages

HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

Hi everyone,
I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
Details:
Steps involved:
1. Install
Windows Server 2003 x64 SP2
2. Install
SQL Server 2005 x64 SP3
3. Install Hyperion 11.1.2 for 64bit Modules:
- Foundation
- EPMA
- Calculation Manager
- Essbase
- Planning
4. Configure Hyperion Modules using DB SQL Server 2005 x64
5. Install and Configure using DB SQL Server 2005 x64
Oracle RCU for 64bit
6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
Result:
Fails to start services for either Hyperion Products or Oracle BI.
Anyone can provide correct steps?

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Installing 10g and Grid control together on Windows Server 2003

Hi all,
I've been having some trouble installing both the Grid Control and Oracle 10g together on a Windows Server 2003 box.
Here's the steps I've followed (if im stepping away from the norm, please tell me.. i REALLY need to do this properly without any hacks.. right now im on a test box.. but soon enough I have to do it in a live production environment and I really need a clean install).
I had a copy of Oracle 9i installed - my databases are pretty small.. 1.5Gb at most and I have been advised to just do an export and import them back in later.. which is fine by me..
I uninstalled Oracle 9i, making sure to check all the environment variables were clear and the registry settings were gone.
I ran the grid control setup
Set Home name = Ora10gGC
Set home path = C:\Oracle\Ora10gGC
I selected Enterprise Manager 10g Grid Control Using a New database 10.1.3.0
I set my passwords, and then set the global database name as emrep (the default)
All the optional configuration assistants ran successfull
Once this was all done and the install was finished, I restarted the server
Then I inserted the Oracle 10g cd
I ran 10g setup
Click Advanced installation
Set home name = Ora10g
Set home path = C:\Oracle\Ora10g
I selected Enterprise edition
Selected General purpose database
I got the following message:
The ORACLE_HOME environment variable is current set. This will prevent proper use of Multiple Oracle Homes and since it is not required for any Oracle products to function, it will be unset in your environment.
I set the global database name on my starter database to STARTER, I selected Use Grid Control for Database Management and set my paths and passwords, then I clicked install.
The install worked up till it tried to create the starter database, then it failed with an ORA-12560 error.
I checked the environment variables and it seems that ORACLE_HOME wasn't unset after all. I deleted it from my environment variables and restarted the server, but I still get the ORA-12560 error when i try to create a new database.
I'd really appreciate it if someone could tell me how to install these 2 products together properly.. Thanks!

I suggest you to read Metalink Note:344537.1 "Installing EM 10g Grid Control Fails to Start the TNSListener Due to Environment Settings"
Additionaly could you post the fragment from alert.log and listener.log files, so more diagnostic information can be provided on this issue.
~ Madrid.

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Visual Studio 2013 and SSDT-BI Preview Command Window

Hi,
Is it normal that VS is putting up a command window when previewing SSRS reports from Visual Studio 2013. It pops up when on preview and I have to minimize it. Can some settings make this window invisible (a more integrated approach)?
Regards
SWEDEV

Hi SWEDEV,
Based on my research, a command window pops up when we preview an SSRS report in Visual Studio 2013 is a confirmed issue.
The issue is fixed, but the updated version within the coming couple of weeks. For more details about this issue, please refer to the following Connect Feedback 849709 and 884544:
https://connect.microsoft.com/SQLServer/feedback/details/849709/reporting-services-preview-processing-host-issues
https://connect.microsoft.com/SQLServer/feedback/details/884544/ssdt-bi-for-vs2013-preview-for-ssrs-pops-up-a-command-window
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Errors in Unity 4.2(1) after OS upgrade to Windows Server 2003

I upgraded our Unity VM only server to server 2003 and reinstalled Unity 4.2(1) and restored untiy from backup. After the restore there are multiple errors in the Application log. I have engaged two different Cisco TAC people and neither of them could help me in resolving these problems. Makes me lose confidence in Cisco when I can't even get an American based engineer who knows anything about Unity! Hopefully someone here knows something.
Application Log errors below:
CiscoUnity_Notifier - Event ID 1071 and 1023,
Active Server Pages - Event ID 5,
CiscoUnity_ConvSubscriber - Event ID 187,
VBRuntime - Event ID 1,
CiscoUnity_BMsgConnector - Event ID 10005.
DBWalker returns1 error relating to orphaned entries in the GlobalSubscribers table:
*** Check for orphaned GlobalSubscriber table entries ***
1649:(error) 2 invalid rows found in the GlobalSubscriber table
These rows have no corresponding GlobalLocation table entry and are likely 'stranded' in the directory from a previous install.
The following rows were found to be invalid:
Alias=USbms_FLAPK001-T03, SubscriberObjectID={069E45E6-B471-4C7C-A4F1-07EE0248EA25}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}
Alias=Unity_FLAPK001-T03, SubscriberObjectID={A1E42B80-AF4E-42CF-A2D0-12E2BEA862B4}, Bad LocationObjectID={63285FC4-1DCB-4C93-9903-DFAD724D548E}

I'll have to look into this a bit more but I can tell you what this essentially means. There are 3 main system accounts that Unity sets up when the application is installed (assuming you integrate with Exchange 2003). You actually specify the location for these objects during the permissions wizard and etc. The 2 accounts here are the primary system account for handling outside calls (Unity_) and the account used for failsafe operations (USbms_) - they are the 2 orphaned entries you see. It appears the location specified for these accounts may have been invalid during the reinstall or there was some other yet to be determined issue at play here that caused these accounts to be orphaned which is not good.
When you installed Win2K3 and then reinstalled Unity, did you set up Unity to the exact version and ES that your last DiRT backup was saved at? Also, did you specify the same OU's and etc when you ran the permissions wizard for where to import objects, create objects, and etc.
Can you attach a copy of the installation log and other application logs? I'll try to look further and see if I can be of more assistance.
Hailey
Please rate helpful posts!

Error while installing SAP b1 9.0 PL4 on Microsoft Windows server 2003 SP 2.

Hi all,
I am trying to install SAP b1 9.0 Pl 4 on Microsoft Windows Small Business Server 2003 SP 2 (32 bit). Server tools and server was successfully installed, now facing an issue while I m running the Client from package folder below is the screen shot for error. Please help ASAP.
Thanks all
Sonil

Hi,
Yes, 9.0 version will not support above server. Please check below guide:
http://www.abbasoft.com/images/Hardware_software_requirements.pdf
Thanks & Regards,
Nagarajan

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010?

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010? or Is it that solutions developed in VS 2012 have to be deployed only to BizTalk 2013?
Thanks

BizTalk 2010 projects are not compatible with Visual Studio 2012. To use Visual Studio 2012 with BizTalk 2010 projects, you must install
BizTalk 2013 on the computer that has Visual Studio 2012. The first time you open a BizTalk 2010 project, it is automatically upgraded to the BizTalk 2013/Visual Studio 2012 project system
Refer
this.
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

Suggestion: Please make a Visual Studio Solution Explorer that is similar to Windows 8 Start Screen

We have monitors now that are enormous and it is now the norm to develop on three or more monitors. Yet we still try to crowd project navigation info that pleads to be fully visualized into a tiny window as if expanding it is somehow a waste of space.
I mention Windows 8 start screen in the title of this post. I have no particular love for the start screen except that it is a different spin on a strict hierarchical display of information. I like that it has the objective of using all available
screen space to present information that would otherwise be shown in a tiny corner of the screen. So my suggestion in its most general form is for you guys to find a way to use the entire screen to allow a developer to quickly and easily navigate a large
VS project.
For example, even if I fully expand the Solution Explorer to take up the space of an entire monitor the top level nodes of my project take up a tiny fraction of the available screen space - I have to drill down up to 12 levels to reach my files. And when
I get to the point where I think I see the file I want, the higher level folders have scrolled off the screen so I loose my place in the project.
A couple of suggestions for a new Solution Explorer:
Edit: Make the Solution Explorer more like the Windows 8 Start screen or a file directory browser in the sense that Start Screen is a full-screen navigation screen versus a control that is primarily desigend to be docked. If I maximize Solution Explorer
on my monitor the MOST screen space it will use is about 20% down the left edge of my screen. Even with 80% of my screen left EMPTY, I am clicking and clicking and scrolling and clicking and scrolling in order to navigate to where I need to be. /Edit
Show an always-visible breadcrumb across the top of the window so the user can navigate up quickly and also maintain a sense of location within the project.
Show folders and files horizontally and vertically. USE THE ENTIRE WINDOW! Allow different views just as we see in Windows file explorer.
Allow (large) user defined icons to be associated with projects, folders and files. Instead of showing the same icon for every project in a solution, default to a unique icon. Thats why we use icons, right?
Allow projects and folders to have foreground/background color properties.
"Scope to this" on the context menu is great... please add the root name on the tab.
It would also be very helpful to display the full directory and solution name on the VS title bar to avoid confusion when working with different versions of the same project. There are a couple add-ons that do this... why has it become necessary for add-ons.

Hi SWheaties,
Thanks for posting in the MSDN forum.
You could submit this feature request: http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product
team is listening to user voice there. You can send your idea there and people can vote. If you submit this suggestion, I hope you could post that link here, so other community members who are interested in this issue will help you vote it. If
it gets more votes, the product team expert would think about adding it as a new feature in the future product. Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am getting an installation error for Adobe AIR

I am getting an installation error for Adobe AIR when I try to update Pandora and it will not allow Pandora to update to the latest version. I have gotten this same msg when I tried to updaqte a program that uses Microsoft server. The error msg says see author.

Hi ricky,
I would use highlight execution (light bulb on LabVIEW toolbar) to see exactly what AI Single Scan VI is causing the error. You could also use breakpoints on each wire right before the AI Single Scan VI is called so that you can turn highlight execution on to see if the call generates an error.
Another suggestion is to create a new VI and copy and paste all the VIs from your current VI to this new VI. This might correct a problem if the VI is corrupt.
Finally, you could use the AI Config, AI Start, AI Read VIs instead of the AI Single Scan. I doubt there is something wrong with the VI, it is morelikely a corrupt VI. Recreating the VI will morelikely fix this problem.
Anyway, hope that helps. Have a good day.
Ron

Indesign standard version installation error for Mac OS: "installer failed to initialize.

Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.

go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Similar Messages

Maybe you are looking for