Error from IVI switch step in Teststand

We have the following issue when using Teststand. A reboot sometimes clears the problem, but other times it requires many reboots.
When starting our test sequence, we undertake a Disconnect All using the IVI Step type to ensure the switches are all disconnected.
We then get the following message:
An error occurred while executing the step. Unexpected Error: Switch Executive failed to initialize for virtual device 'Joyswitch'
Details: Joyswitch_init returned an error -1074118644 (0x%3)
Source: TSIviStepType
Any help would be gratefully appreciated
I have attatched the actual run-time error.
Attachments:
Switch_Exec_error.jpg ‏122 KB

The suggestion to try the validate option under MAX for Switch Executive would be a good idea. The error that you are seeing appears to be coming back from the IVI driver.
Question that come to mind are:
- You say that the Disconnect All fails, but does a Connect work?
- What hardware and IVI driver is the Joyswitch using?
- It appears that you are using TestStand 3.0, but what version of the Switch Executive are you using?
Scott Richardson (NI)
Scott Richardson
National Instruments

Similar Messages

Error when editing IVI Scope Step in TestStand 3.1

When I open the edit box for an IVI Scope Step in TestStand 3.1 I get the following error: Method '~' of object '~' failed (-2147417851). I get the same error again when I click on the Logical Name dropdown box in the edit window. I have an IVI logical name of 'TekScope' in MAX that was created when I installed the IVI drivers for a Tektronix DPO7000.
Software Installed: TestStand 3.1, NIMax 4.3, NI IVI Compliance Package 3.2, Windows XP Pro. SP2
It seems that TestStand is unable to communicate with MAX. I don't think it is a version compatibility problem because I had the same problem when using MAX 3.1.1.

Nick,
Thanks for the reply. This problem went away when I opened the IVI example sequence that is installed along with TestStand. It has not repeated since. I can now access my defined 'TekScope'.
I am having a problem getting the IVI code to run in simulation mode. I modified the TestStand 3.1\Examples\IVI\IviStepTypes.seq file to change the Fileglobals.ScopeLogicalName value to TekScope which is the scope name in the dropdown box for edit IVI tools. I then selected the scope steps and selected Run Selected Steps. I get the following error:
An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types'
An error occurred while executing the step.
IVI Error: The IVI instrument failed to initialize for logical name 'TekScope'.
Details: TekScope_InitWithOptions returned an error: -1074134964 (0xbffa004c). The option string parameter contains an entry with an unknown option value.
Source: TSIviStepTypes
-1074134964; User-defined error code.
In MAX the TekScope.DriverSession - Simulate With setting is nisScope, Driver Setup is blank.

How to Get a transformation Error from a previous step in cc BPM

Hello gurus!
I have an important situation, in a BPM step I make a SendSync Call, if there is an error, it goes to the exception branch, and then I do a transformation step (to assign some values to an Idoc) and then I send the Idoc to an R3 system to inform the error.
Sometimes, for example in the sync call throws this error: (that can be seen in the abap monitor)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code area="MESSAGE">GENERAL</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.UnknownHostException: safcc.pfc.gov.tt</SAP:AdditionalText><SAP:Stack/><SAP:Retry>M</SAP:Retry></SAP:Error>
My need is to get the error message,and to map it in an idoc field (with an UDF in the transformation exception branch for example), the error is exactly in this part of the result:
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.UnknownHostException: safcc.pfc.gov.tt</SAP:AdditionalText>
Is there any way to achieve this?
Thanks in advance !
Juan.

You wont be able to get the error details....just an indication that an error has occured can be obtained (the exception branch)...no error text can be extracted.
Regards,
Abhishek.

Switch Step Scan List

I am using the 2530B with dual 64x1 topology. In TestStand, I want to set up the IVI Switch Step to where it connects a channel off of each bank and then uses the DMM to record. In LabWindows I can use: "ch0->com0 & ch64->com4";
How would I do that using the IVI Switch Step? Under 'configure scan' then ScanList tab, I currently have ch0->com0 then ch64->com4 using No Action so that each set before DMM measures then each will disconnect with there own commands. Is there an easier way for this, although I have not tested this method? Forgive me if this seems common knowledge but this is first time I am using TestStand.

Are you asking about an easier way to disconnect the switch? If you could clarify some more about what you are trying to do, that would be great. Also, are you using Switch Executive?
Jacob R. | Applications Engineer | National Instruments

Teststand 4.0 IVI-DMM Step error

I have Teststand 3.5 and 4.0 installed on a computer and a NI-4060 in a PXI chassis. When I try running a sequence that has an IVI-DMM step in it in 3.5 everything runs fine. When I try the same sequence opened in 4.0 it gives me the following attached error (both attachments are the same error one is just scrolled down so you can see the whole thing.) I have tried adding a simple IVI step from scratch in teststand 4.0 and I get the same error.
Any ideas?
Brian
Attachments:
untitled1.JPG ‏107 KB
untitled2.JPG ‏106 KB

Ok, I used the version selector, went back to 3.5, and ran the sequence and it ran fine like I expected. When I switch back to 4.0 and ran it it worked (first time in a dozen tries.) So I switched back to 3.5 ran it and then ran it 4.0 again and it failed. I attached a spy capture from 3.5, 4.0 worked, and 4.0 didnt work.
Brian
Attachments:
DMMConfig_TS40_Capture_Didnt_Work.spy ‏1 KB
DMMConfig_TS35_Capture.spy ‏11 KB
DMMConfig_TS40_Capture_Worked.spy ‏12 KB

IVI-C switch step open session error

In my current Test Stand 3.5 sequence I start by using niSE open session.vi to begin a new switch session. I then pass this handle along to other VIs for switching, which works perfectly, and then at the very end of the sequence I pass the handle to a niSE close session.vi. The problem I'm having is now I want to start using the built in IVI-C Switch steps. Everytime I insert one of these steps in the middle of my sequence I get an error because the step appears to be trying to open a new session, when one is already open. Is there a way to pass the currently running session handle into the "virtual device name" of the switch step so that it doesn't try to open a new one?
Thanks,
Jason

Hi Jason.
This is known bug in TestStand and it is currently being addressed CAR ID #125874. Basically when the NISE session is closed, TestStand doesn't actually dispose of the session but rather hangs on to it until the execution window is closed.
There is a workaround:
Create a statement step after you close the NISE session, and call the following.
RunState.Execution.TSIviStepTypes_AnchorName_For_NISE Virtual Device = nothing
where NISE Virtual Device is the name of the NISE device that you want to end the session to.
Chris
National Instruments
Applications Engineer

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

"Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it." occurs while deploying from Visual studio

HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AM

Hi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.

Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered

How to run from the caller's step in teststand

Hi,
When an error occurs in a step during a sequence, I can use the SequenceFilePostStepRuntimeError call back to catch the error. But how can I go back to the step which is the one just raised the error for a retry run again? I do not want to make all test fail straightway, but want to go back to the caller step to have retry a few times 1st.
Many thanks,
WeiL
Solved!
Go to Solution.

There is an example which shows how to do exactly what you are asking located at:
<TestStand Public>\Examples\Callbacks\PostStepRuntimeErrorCallback\ErrorHandlerExample.seq
Hope this helps,
-Doug

HT204406 ITUNES MATCH Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows close program [iTunes]" with only 30-50 of 500+ songs. Help!

ITUNES MATCH - Need help. Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows must close program [iTunes]" with only 30-50 of 500+ songs. Anyone have this issue of iTunes crashing?

Exactly the same problem here. As far as I can see this problem has been around since Match was first released with no action from Apple to rectify it. I've spent days trying to get this to work now and unless I get a fix soon, I'm going to pull my Match membership and ask for a refund because this is not what I signed up for...

Teststand switch step without NISE software installe

Is it possible to run a sequence with switch steps on a PC without NISE installed. Is there a run time engine or something.
kph

In order to access a NISE virtual device fom TS you will need to have the NISE virtual device present in MAX and therefore you will need at least the deployment version of NISE installed on the machine.

ECC6 Installation error when start instance step

Hi all,
I'm doing to install IDES ECC6 SR3 on window x64 with oracle database.
I have some error in start instance step as error log below.
Could you help me to investigate it?
I try to do it more time but it can not pass this step.
Thank you very much.
This thread is same my problem but it still is not solved.
Solution Manager 4.0 on Win install problem
CJS-30149 ABAP processes of instance FSM/DVEBMGS00 ABAP: MSNOTRUNNING did not start after 10:00 minutes. Giving up.
Connect to message server (st/3900) failed: NIECONN_REFUSED.
C:\usr\sap\FSM\SCS01\work
trc file: "dev_enqsrv", trc level: 1, release: "700"
Thr 2932 Thu Jun 26 14:01:51 2008
Thr 2932 stopAllThreads: stop Thread worker thread ...Thr 2932 done
Thr 2932 stopAllThreads: stop Thread Listener thread ...Thr 2932 done
Thr 2932 stopAllThreads: stop Thread IOThread_0 ...Thr 2932 done
Thr 2932 stopAllThreads: stop Thread ADM-thread ...Thr 2932 stopAllThreads: stop ADM-thread not implemented. Hard kill
Thr 2932 *** ERROR => ShmDelete: Invalid shared memory Key=1. http://shmnt.c 719
Thr 2932 *** ERROR => ShmCleanup: ShmDelete failed for Key:1. http://shmnt.c 793
Thr 2932 *** ERROR => ShmDelete: Invalid shared memory Key=82. http://shmnt.c 719
Thr 2932 *** ERROR => ShmCleanup: ShmDelete failed for Key:82. http://shmnt.c 793
Thr 2932 ***LOG GEZ=> Server shutdown (normal shutdown) http://encllog.cpp 493
Thr 2932 Enqueue server: normal shutdown
Ref.
My RAM is 3.33 GB
and SWAP Memory around 22 GB.
I've check requisition option in master installation and all result is pass to install.

INFO 2009-02-24 08:18:02.593
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:18:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:18:02.625
Switched to user: devadm.
INFO 2009-02-24 08:18:04.703
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:18:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 2 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:18:07.750
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:18:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 5 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:18:08.921
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:18:08
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:18:58.421
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:18:58
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 55 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:18:58.703
Switched to user: devadm.
INFO 2009-02-24 08:19:00.546
Execution of the command "E:\oracle\DEV\102\bin\lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 08:19:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 1 hr. 11 min. 57 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2009-02-24 08:19:06.281
Execution of the command "E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code 0. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090224081904
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: disconnected from DB
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090224081906
INFO 2009-02-24 17:51:16.343
Execution of the command "C:\j2sdk1.4.2_19-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 0. Output:
java version "1.4.2_19-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_19-rev-b07)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_19-rev-b07, mixed mode)
Import Monitor jobs: running 1, waiting 111, completed 0, failed 0, total 112.
Import Monitor jobs: running 2, waiting 110, completed 0, failed 0, total 112.
Import Monitor jobs: running 3, waiting 109, completed 0, failed 0, total 112.
Loading of 'PCL2' import package: OK
Import Monitor jobs: running 2, waiting 109, completed 1, failed 0, total 112.
Import Monitor jobs: running 3, waiting 108, completed 1, failed 0, total 112.
Loading of 'PCL4' import package: OK
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 24-FEB-2009 17:51:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Production
Start Date                24-FEB-2009 07:07:02
Uptime                    0 days 10 hr. 44 min. 31 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\DEV\102\network\admin\listener.ora
Listener Log File         E:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mm)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

How to Install Inspection Step in Teststand 2013?

Hello
I try to install the NI Vision Builder Inspection Step to Teststand 2013. I Installed NI Vision Builder Automated Inspection 3.6 and Ni Vision Acquisition Software 8.5.1 and I Installed from "ts_vbai_36_and_older_july10.zip" the inspection step to TS2013.(http://www.ni.com/white-paper/4007/en/)
But when i try to run inspection step connect target i got an error message. (See screenshot) I dont know what s wrong and how to solve!?

The only way I can reproduce this error code is by specifying a different version than 3.6.0 in the "VBAI Version". Tested in TestStand 2010 SP1 with VBAI 3.6.1.
Attachments:
VBAIConnect.png ‏21 KB

Error from IVI switch step in Teststand

Similar Messages

Maybe you are looking for