Error from loading Hierarchy data from BW
I am following the BPC NW online help to load the costcenter master data from BW, The members were successfully loaded, but
when I tried to load the hierarchy, I received the following message"
Task name HIERARCHY DATA SOURCE:
Info: Hierarchy node includes text node or external characteristics
Record count: 50
Task name CONVERT:
No 1 Round:
Record count: 50
Accept count: 50
Reject count: 0
Skip count: 0
Task name HIERARCHY DATA TARGET:
Hierarchy nodes include dimension members that do not exist
Submit count: 0
Application: CONSOLIDATION Package status: ERROR
I am pretty sure that all the dimension members were loaded in this herarchy. Since the hierarchy node I am trying to load only include 2 level, I have only 49 base member and 1 node which I can see from the BPC admin after master data,following is the.tranformation and conversion file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
NODENAME=NODENAME
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
IOBJNM=IOBJNM
VERSION=VERSION
*CONVERSION
HIER_NAME=HIER_NAME.xls
NODENAME=HIER_NAME.xls!NODE_NAME
PARENT=HIER_NAME.xls!NODE_NAME
CONVERION TAB:
EXTERNAL INTERNAL FORMULA
CC_Her PARENTH1 where CC_Her is the name of the gerarchy in BI
NODENAME TAB:
EXTERNAL INTERNAL FORMULA
* js:%external%.toString().replace(/\s+/g,"")
Did I miss anything?
Edited by: Jianbai on Jan 18, 2011 9:57 PM
Edited by: Jianbai on Jan 19, 2011 12:29 AM
Hi Jianbai,
The following link describes the steps to import master data/hierarchies from SAP BW into SAP BPC 7.5 NW..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c02d0b47-3e54-2d10-0eb7-d722b633b72e?quicklink=index&overridelayout=true
Hope this helps!
Thanks
BSV
Similar Messages
-
Error when loading the data from PSA to ODS......
Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil -
Error while loading transaction data from an Infoprovider Mapping C_ACCT
Hi Gurus,
We are implementing BPC Consolidation for NetWeaver 7.5, and we're facing the following situation:
We have loaded master data from 0RC_ACCOUNT (group account) to our dimension C_ACCT without a problem, but when we run the loading package from an infoprovider 0FIGL_C10 (Transactional Data), the following error message appear:
Dimension: Member C_ACCT: 000 not valid
We already check data in source InfoProvider and there's no record with 000 account value.
Any suggestions?
Thanks in advance
Best Regards
Abraham MéndezRad,
See if SAP note# 492647 & 849501 is of some help in your scenario. -
Error while loading Transactional data from NW BW Infoprovider
Hi,
I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
Below is the transformation file content
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=NO
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 9999999999999
ROUNDAMOUNT=
*MAPPING
ACCOUNT = 0ACCOUNT
BUSINESSTYPE = *NEWCOL(NOBTYPE)
BWSRC = *NEWCOL(R3)
COMPANYCODE = 0COMP_CODE
DATASRC = *NEWCOL(R3)
FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
GAME = *NEWCOL(NOGAME)
INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
PROBABILITY = *NEWCOL(NOPROB)
PRODUCT = *NEWCOL(NOPROD)
PROFITCENTER = 0PROFIT_CTR
PROJECT = *NEWCOL(NOPROJECT)
TIME = 0FISCPER
VERSION = *NEWCOL(REV0)
WEEKS = *NEWCOL(NOWEEK)
SIGNEDDATA= 0AMOUNT
*CONVERSION
Below is the Error Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCA_C01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: ACTUALREPORTING Package status: ERROR
Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
ANy Inpout will be appreciated.
SanjayHello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Error while loading the data from excel to database.
Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM -
Error while loading the data from ODS to InfoCube
hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwanHi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly -
Error in loading the data from flatfile
Hello All,
when am loading the data from flat file iam getting error "ERROR4 WHEN LOADING THE EXTERNAL DATA" is it because of mapping in the transferrules or error in the flat file.
Points will be assigned to all helpful answer.
Thanks & Regards
PriyaHii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu. -
Loading Hierarchy data from a DSO!
Hi SDN,
We have a ZTable containing a custom hierarchy in the SAP ECC system and we bring all its data into a staging DSO in BI via PSA.
So now we have the hierarchy data in two places: PSA and a write-optimized staging DSO.
Any idea how can we load the data from either of the two into a hierarchy? Is there a standard SAP BI function module which can be called by a program to input data and be loaded into the hierarchy tables?
I know we have the option of dumping data into a flat file and then use a standard extractor to load. We prefer doing it the other way, if possible.
Please advise.
Thanks.
SMHello Shahid,
I do ot think you can do this directly. you can use the method Arun mentioned to get what you want.
Another way is that yuo can use flat file to load the hierarchy into Bi if you can export the Ztable to a file.
Regards
Jonas -
BPC Error while loading master data from SAP BW
Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trieHello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM -
Error while load the data from CSV with CTL file..?
Hi TOM,
When i try to load data from CSV file to this table,
CTL File content:
load data
into table XXXX append
Y_aca position char (3),
x_date position date 'yyyy/mm/dd'
NULLIF (x_date = ' '),
X_aca position (* + 3) char (6)
"case when :Y_aca = 'ABCDDD' and :XM_dt is null then
decode(:X_aca,'AB','BA','CD',
'DC','EF','FE','GH','HG',:X_aca)
else :X_aca
end as X_aca",
Z_cdd position char (2),
XM_dt position date 'yyyy/mm/dd'
NULLIF XM_dt = ' ',
When I try the above CTL file; geting the following error..
SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
ORA-00917: missing commaPossible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Error in loading transaction dat from flat file
hi everybody
while i try to load data from flat file at time of scheduling it shows the error "check load from infosourceand its showing errorwhilw monitoring the data as follow"the correcsponding datapacket were not updated using psa" what can i do to rectify the problem
thanks in advanceHi,
Please check the data whether it is in a correct format using the "Preview" option in the infopackage.
Check whether all the related AWB objects are active or not.
Regards,
K.Manikandan. -
Error in load master data from flat file to infocube "No SID found for val"
Hi gurus
while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
overall status is red.It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
Message was edited by: Steve Wilson
Message was edited by: Steve Wilson -
SQL Interface - Error in Loading the data from SQL data source
Hello,
We have been using SQl data source for loading the dimensions and the data for so many years. Even using Essbase 11.1.1.0, it's been quite a while (more than one year). For the past few days,we are getting the below error when trying to load the data.
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]CURSOR IDENTIFIED IN FETCH OR CLOSE STATEMENT
IS NOT OPEN (DIAG INFO: ).]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021014)
ODBC Layer Error: Native Error code [4294966795]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1003050)
Data Load Transaction Aborted With Error [7]
[Mon Jan 10 11:02:56 2011]Local/{App Name}///Info(1013214)
Clear Active on User [Olapadm] Instance [1]
Interestingly, after the job fails thru our batch scheduler environment, when I run the same script that's being used in the batch scheduler, the job completes successfully.
Also, this is first time, I saw this kind of error message.
Appreciate any help or any suggestions to find a resolution. Thanks,Hii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu.
Maybe you are looking for
-
Help needed in Idoc To File Scenario
Hi Experts, My scenario is Idoc to File. Here my job is to convert the purchase order idoc into xml file. In this there are three conditions. converting the standard PO into xml file (ii) converting the PO with seri
-
I am trying to enable file sharing between my new iMac and my (2007) model Macbook Pro. I am succesfully able to share files from the old mac to the new one, as I can connect via the macbook, but when I try and connect from the new Mac it "fails".
-
I upgraded by iPhone 4 to IOS 5 and added iCloud. Now I cannot access my Gmail account. It was there before the upgrade, now it's gone. I have tried to re-add the account, but it does not work. The same thing has happened to my iPad2. I have los
-
My iPodTouch wont respond to car Sserio,iHome,or computer,only charger
I recently bought songs from my ipod touch (1st gen.)but now i can't get the songs off of the ipod to put them in my library on my computer because the ipod wont respond when i plug it into the multiple USB ports on my computer. It wont respond when
-
My mac book has pop ups all the time
I have a mac book and it keeps getting pop ups I let my friend use the computer so I have no clue what she did but when i got it back pop ups started happening I have disabled the pop up on safari its self but it did nothing Im not sure what to do?