ERROR: Function expected

Does any one of you know what does it mean?
I've created a report in CR 10 earlier. After that i just migrate the CR 10 report to Crystal 11 using Crystal 11 client. And it was running well in the client.
Also I exported the report into BO XI R2 enterprise server. But it is throwing the following error while trying to launch the report from BO InfoView.
ERROR: Function expected
Pls. let me know what this issue means?
Thanks
Viswa

Hi,
Thanks for your reply.
When checked under Report>>Formula Workshop i found some Repository custome functions and i've no rights to delete those functions! And those functions are not used in the report too...
The complete error text is : ERROR: Function expected only.
I'm wondering why this is happening under InfoView only not in Crystal client!
Pls. let me know
Thanks
Viswa

Similar Messages

HTML5 local storage broken in ie11 win 8.1 x64 ? error: function expected

localStorage.setItem("hello", "somedata");
alert(localStorage.getItem("hello"));
localStorage.clear();
Internet Explorer Version 11.0.0600.17107, update version 11.0.8 (KB2953522)
the below was fixed in patch 11.02 apparently, so what go on here ???
http://stackoverflow.com/questions/21155137/javascript-localstorage-object-broken-in-ie11-on-windows-7

Hi,
Thanks for contacting Microsoft.
The HTML5 postMessage function provides a great way for mutually
distrusting documents (even cross-domain) to communicate securely and with high performance and reliability. Unfortunately, as reported on
Connect, the HTML5 postMessage function does not work between tabs/windows in IE8. (This limitation is an artifact of the Loosely-Coupled IE feature, in which content in different tabs/windows may run in a different
process.) Update: As of IE11, this issue has not yet been fixed.
For more information, please refer to the article below.
===================================
HTML5 Implementation Issues in IE8 (and later)
http://blogs.msdn.com/b/ieinternals/archive/2009/09/16/bugs-in-ie8-support-for-html5-postmessage-sessionstorage-and-localstorage.aspx
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Running SQL Procedure with dg4msql errors: Function sequence error HY010

I am trying to execute a stored procedure on a SQL database and get the error Function sequence error HY010.
A simple query on a table returns teh expected result.
I have a single Win2008R2 server with MSSQL Express 2008 and Oracle 11gR2 (32bit not 64bit version of Oracle)
Below is the gateway init, listener and tnsnames files and the query I am trying to run:
-- initORIONWASP.ora --
HS_FDS_CONNECT_INFO=INGRDB//waspForGIS
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
HS_CALL_NAME=dbo.spTest;dbo.spQueryAsset;dbo.spQueryAssetDetails
HS_FDS_PROC_IS_FUNC=TRUE
HS_FDS_RESULTSET_SUPPORT=TRUE
-- Listener.ora -- (partial)
(SID_DESC =
(SID_NAME = ORIONWASP)
(ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
(PROGRAM=dg4msql)
-- tnsnames.ora -- (partial)
ORIONWASP =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=INGRDB)(PORT=1521))
(CONNECT_DATA=(SID=ORIONWASP))
(HS=OK)
-- Simple Query --
Running select "Asset_ID" from asset@ORIONWASP; returns the correct result
Running select * from sys.procedures@ORIONWASP; returns a list of procedures including the procedure I want to run
-- This pl/sql block returns the error ******* identifier 'spTest@ORIONWASP' must be declared *******
declare
begin
"spTest"@ORIONWASP;
end;
-- This passthrough pl/sql block returns ******** [Oracle][ODBC SQL Server Driver]Function sequence error {HY010} ********
DECLARE
CRS BINARY_INTEGER;
RET BINARY_INTEGER;
v_COL1 VARCHAR2(50);
v_COL2 VARCHAR2(50);
BEGIN
CRS := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@ORIONWASP;
DBMS_HS_PASSTHROUGH.PARSE@ORIONWASP(CRS, 'exec spTest');
BEGIN
RET := 0;
WHILE (TRUE)
LOOP
ret := DBMS_HS_PASSTHROUGH.FETCH_ROW@ORIONWASP(CRS, FALSE);
DBMS_HS_PASSTHROUGH.GET_VALUE@ORIONWASP(CRS, 1, v_COL1);
DBMS_HS_PASSTHROUGH.GET_VALUE@ORIONWASP(CRS, 2, v_COL2);
DBMS_OUTPUT.PUT_Line('Col1:'||v_COL1||' Col2:'||v_COL2);
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
DBMS_OUTPUT.PUT_LINE('End of Fetch');
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@ORIONWASP(CRS);
END;
END;
END;
/

The gateway configuration file contains:
HS_FDS_PROC_IS_FUNC=TRUE
HS_FDS_RESULTSET_SUPPORT=TRUE
This setting commonly causes problems and you need to set
HS_FDS_PROC_IS_FUNC=TRUE
HS_FDS_RESULTSET_SUPPORT=FALSE
for normal procedure calls and
HS_FDS_PROC_IS_FUNC=FALSE
HS_FDS_RESULTSET_SUPPORT=TRUE
when calling the procedure with ref cursors.
There's a note in My Oracle Support that gives you examples how to call remote SQl Server procedures
Note.197192.1 Different Methods How To Call MS SQL Server Procedures Using TG4MSQL - DG4MSQL
and another one for the Sybase gateway but this code is similar for the SQL Server:
Article-ID: Note 351400.1
Title: How to Call a Remote Sybase Procedure Using TG4SYBS

EIC Error *nty_is_active* is undefined & Error: Object expected

Hello,
Installation Product Version ECC 6.0
We´re implemented Employee Interaction Center (EIC).EH 4 SP2
Component version: EHP 4 for SAP ERP 6.0 /7.0.
We have already installed the component EIC in the system and activated some services in SICF and Activation of Business functions in EIC in Transaction SFW5.
The problem is that when i launch the transactino "HREIC" the web explorer 7.0, launch an error about some configuration object:
ERROR:
Line: 301
Char: 9
Error nty_is_active is undefined
Code:0
Line: 295
Char: 9
Error: Object expected
Code:0
Could you recomend me also some configuration guide with all the details that i have to configurate to EIC, please?
Thanks so much for your help!
Edited by: llello gomez on Jun 3, 2009 5:01 PM

Hi Ilello,
You said you activated "some" services via SICF. Please make sure they are all activated as below and see SAP Note 1176990:
ICF services must be activated via transaction SICF:
/sap/bc/bsp/sap/hreic_vp,
/sap/bc/bsp/sap/ic_base,
/sap/bc/bsp/sap/hreic_rt_rep_vp,
/sap/bc/notify,
/sap/bc/bsp/sap/sam_notifying,
/sap/bc/bsp/sap/sam_sess_queue,
/sap/bc/bsp/sap/hrrcf_btf_edit.
/sap/bc/bsp/sap/crm_bm
We are in the middle of configuration of the EIC now. Many parts to put together but we hope the final product will meet our expectations.
Paul
Edited by: Paul Davidson on Jun 4, 2009 11:03 AM

MDX - function expects a string or numeric expression for the 1 argument. A tuple set expression was used.

why this query
select [Measures].[F Events Count] on 0,
Filter([D Actor Player].[Actor].children,
([Measures].[F Events Count],
{([D Date].[Hierarchy].[Season].[2012 - 2013]),([D Date].[Hierarchy].[Season].[2013 - 2014])},
[D Result].[Result].&[Goal])
>=5) on 1
from [FBA Cube]
gives this error:
Query (3, 3) The >= function expects a string or numeric expression for the 1 argument. A tuple set expression was used.
while the following query works fine
select [Measures].[F Events Count] on 0,
Filter([D Actor Player].[Actor].children,
([Measures].[F Events Count],
[D Date].[Hierarchy].[Season].[2012 - 2013],
[D Result].[Result].&[Goal])
>=5) on 1
from [FBA Cube]
why having set inside Filter's boolean expression generates that error? how can we
keep the set inside the Filter's boolean expression but
solve the problem? please explain the reason and solution

Hi Butmah ,
I think you should use an aggregation function with the set and the tuple ... adding an AdventureWorks snippet :
select [Measures].[Order Count] on 0,
Filter([Product].[Category].children,
SUM({[Date].[Fiscal].[Fiscal Year].&[2011],[Date].[Fiscal].[Fiscal Year].&[2009]}
,([Measures].[Order Count],[Geography].[Geography].[Country].&[United States])
>=5) on 1
from [Adventure Works]
Regards, David .

Error: object expected in WAD-javascript

hi all,
i have written a .js file which i am using in WAD templates.
there are certain functions which , when i move to the .js file i get the error: object expected.
if i keep those functions in the template i do not get ne error.
i just can't figure out why it is happening.
please help
Godhuli

i guess after moving to file in the MIME repository, you have properly linked it. if you still get this error it may be that server cache is causing problem.
you can invalidate the server cache from SMICM transaction. (this you may have to do it every time you change the .js file and reload it to MIME repository)
also check this thread for clearing cache
How to clear Cache in SAP BW
Regards
Raja
Message was edited by: Durairaj Athavan Raja

Help with error message: Expected end of line but got identifier

The following is a calculated applescript step in a Filemaker script. It tells iCal to go to the date of an iCal event that the script has previously created from Filemaker. The code below keeps generating an error message: "Expected end of line but got identifier." Note: "ACTIVITY::Date" below is Filemaker's way of indicating the file name (ACTIVITY) and the field in question (date). Help appreciated.
"tell application \" iCal\" ¶
activate ¶
switch view to month view ¶
set theDate to date \"" & ACTIVITY::Date & "\" ¶
view calendar at theDate ¶
end tell"

It's not clear exactly what you're aiming for here, so it's not easy to tell you how to fix it.
At first glance I'd say you're missing a quote symbol or two, but even then it doesn't make a lot of sense without more context - for example, 'ACTIVITY::Date' isn't valid as an AppleScript variable name (you can't have a : in a variable name), and your code isn't within a Filemaker block, so it doesn't appear to relate to Filemaker, either.
In either case the only thing that looks remotely valid to me would be:
set theDate to date "\"" & ACTIVITY::date & "\""
but without knowing the context of ACTIVITY::Date it's impossible to tell if this is valid, or how it differs from:
set theDate to date ACTIVITY::Date
(i.e., why the quotes are needed at all)

Job in batch R/3 CallReceive error Function RFC_ABAP_INSTALL_AND_RUN

Hi,
I have an scenario where I am integrating SAP with a DB. I am pulling data from 2 tables from SAP using the R/3 Data flow. I need to run this job on batch, so I changed the parameters on the datastore used to access SAP, when it runs, the job gets terminated, and I got the following error
|Dataflow df_sap2tables2file
R/3 CallReceive error <Function RFC_ABAP_INSTALL_AND_RUN: . Exception condition "INVALID_TARGET" raised.. The problem may go
away if you change the SAP datastore property to Execute in background(batch)>.
|Dataflow df_sap2tables2file
R/3 CallReceive error <Function RFC_ABAP_INSTALL_AND_RUN: . Exception condition "INVALID_TARGET" raised.. The problem may go
away if you change the SAP datastore property to Execute in background(batch)>
The abap program gets created on the shared folder.
Anyone has faced this issue?
Thanks,
Julio

Hi,
The issue has been resolved. You have to:
Upload DS function modules into SAP
Define an RFC destination on SAP
Run the task RfcSrv on the DS Server
Thanks, for the help
Julio

Error: "Function or method not supported." when using RF List Mode on NI 5673E

Hi,
I am trying to use the RF List Mode in NI RFSG 5673E. I tried running the sample code "RFSG Configuration List Frequency and Power Sweep.vi" but an error would show up:
"Error: niRFSGCreateConfigurationList.VI <ERR> The LO reported the following error: Function or method not supported." with the error code: BFFA4239.
I also tried running other sample codes that contain the Configuration List VI's but the same error appeared. I am using NI RFSG 1.8.5.
I would really appreciate any help on this. Thanks!

Hello jdlabrador,
I setup a 5673E here and tried to run the same example. I did not encounter an error.
Other reports I've found pertaining to this error usually involved a large number of steps - there was not enough space on the hardware to accommodate them. The error text you're seeing is a little different in that it states that the Create Configuration List method isn't supported for the LO.
Do each of the modules in your 5673E (5450, 5611, 5652) pass a self-test in MAX?
Have you associated the 5450 and 5652 with the 5611?
Could you post a screenshot of the fully-expanded Devices and Interfaces tree from MAX?
Since RFSG 1.9.5 is available, it may be a good first-step to upgrade to it.
Best regards,
Matthew H.
Applications Engineer
National Instruments

Error "Function G1 does not exist "

Hi ,
While doing monitoring got error " Function G1 does not exist ".
Bdoc type : BUPA_REL
Sate : E04.
Checked SMQ1,SMQ2 , no queues were in sysfail status.How to maintain this function.
Help me how to clear .
Thanks in advance, Regards,
PA.

Hi ,
May be your customization settings was not replicated correctly.
In R/3 you have Contact person function G1 and it doesn't exist in CRM.
You can check it : go to BP trn => open an organisation that has contact person =>relationship tab => double click on contact person => In "Contact person data "frame you will see field "function" => press F4 and check existing values.
Those values should be same as in R/3 system.If not - check your customization objects synchronization.
Hope, it's help
Rika

RFC CallReceive error Function Z_AW_JOB_RUN

Hi,
I am using SAP BODS 3.2 to compare customer data between SAP MDM,SAP ECC and SAP CRM systems. I am using ABAPFlows for SAP CRM and SAP ECC customer data extraction. I have generated the abap code and manually pasted it in respective systems. When I run my batch job .I am getting the following error. Please help me out in resolving it.
error:
12386564 1 R3C-150412 8/9/2011 11:39:53 AM |Data flow DF_IG_CUSTOMER_GLOBAL_EXTRACT
12386564 1 R3C-150412 8/9/2011 11:39:53 AM RFC CallReceive error <Function Z_AW_JOB_RUN: The ABAP program lines are wider than the internal table.. The ABAP program lines
12386564 1 R3C-150412 8/9/2011 11:39:53 AM are wider than the internal table.>.
9502780 1 R3C-150412 8/9/2011 11:39:53 AM |Data flow DF_IG_CUSTOMER_GLOBAL_EXTRACT
9502780 1 R3C-150412 8/9/2011 11:39:53 AM RFC CallReceive error <Function Z_AW_JOB_RUN: The ABAP program lines are wider than the internal table.. The ABAP program lines
9502780 1 R3C-150412 8/9/2011 11:39:53 AM are wider than the internal table.>.
Thanks,
Nag

Hi,
Sounds like a copy/paste issue. If you copied the ABAP from within the Designer then maybe try either a) open the generated ABAP file in notepad and copy from there, or b) copy the generated ABAP file to the SAP file system and then use the Import functionality in SE38 to import the code into the ABAP editor instead of pasting it.

Apex 4.1 Custom error function and page rendering

Hi
I have setup a demo application at http://apex.oracle.com/pls/apex/f?p=19820:1 which is a simple testing application for testing of the apex_error_handling_example function Patrick wolf put into Oracle documentation. I have setup a error on the page rendering of page 2 in the application. The error process contain this simple error code declare
v_id number;
begin
select 'x' as one into v_id from dual;
end;
which generate plsql numeric or value error. The process is running before regions on page rendering on page 2. I have also created the same error process on page processing before DML processing on the page. When i insert apex_error_handling_example into the application level and run the application the error is not caught and the page is rendered as nothing was wrong. When the page is submitted the error function is executed and work correct.
When i remove the error function from the application the error is caught and displayed on the APEX error page with the detail link for drill down to show more about the error.
Any which can tell what is wrong with the setup i have done. The error function apex_error_handling_example setup is simply a copy/paste from the documentation with some few debug message put into a logging table.
kindest regards
jon

Hi
Yes, when you submit the page the page processing is displaying the error message inline, but it does not show the same error on page rendering for page 2, if i remove the custom error function it will show the error on APEX separate error page. The debug output from the page 1 is as following:
0.12084     0.00345     ...metadata, fetch items     4
5
     0.12431     0.00146     Show page template header     4
2
     0.12576     0.00152     Rendering form open tag and internal values     4
2
     0.12728     0.00034     Computation point: After Header     4
1
     0.12767     0.00040     Processes - point: AFTER_HEADER     4
1
     0.12801     0.00508     ...Process "Fetch Row from DEMO_CUSTOMERS" - Type: DML_FETCH_ROW     4
8
     0.13312     0.00242     ...Execute Statement: begin begin select ROWID,"CUSTOMER_ID","CUST_FIRST_NAME","CUST_LAST_NAME","CUST_STREET_ADDRESS1","CUST_STREET_ADDRESS2","CUST_CITY","CUST_STATE","CUST_POSTAL_CODE","PHONE_NUMBER1","PHONE_NUMBER2","CREDIT_LIMIT","CUST_EMAIL" into wwv_flow.g_column_values(1),wwv_flow.g_column_values(2),wwv_flow.g_column_values(3),wwv_flow.g_column_values(4),wwv_flow.g_column_values(5),wwv_flow.g_column_values(6),wwv_flow.g_column_values(7),wwv_flow.g_column_values(8),wwv_flow.g_column_values(9),wwv_flow.g_column_values(10),wwv_flow.g_column_values(11),wwv_flow.g_column_values(12),wwv_flow.g_column_values(13) from "OLE1923"."DEMO_CUSTOMERS" where "ROWID" = :p_rowid; end; end;     4
4
     0.13552     0.00038     Computation point: Before Box Body     4
1
     0.13590     0.00032     Processes - point: BEFORE_BOX_BODY     4
0
     0.13621     0.00051     ...Process "gen error" - Type: PLSQL     4
1
     0.13672     0.00142     ...Execute Statement: begin declare v_id number; begin select 'x' as one into v_id from dual; end; end;     4
2
     0.13814     0.00052     Add error onto error stack     4
1
     0.13866     0.00048     ...Error data:     4
1
     0.13914     0.00048     ......message: ORA-06502: PL/SQL: numeric or value error: character to number conversion error     4
1
     0.13962     0.00049     ......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error     4
1
     0.14011     0.00048     ......display_location: ON_ERROR_PAGE     4
1
     0.14059     0.00047     ......is_internal_error: false     4
1
     0.14106     0.00073     ......ora_sqlcode: -6502     4
1
     0.14179     0.00048     ......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error     4
1
     0.14227     0.00049     ......error_backtrace: ORA-06512: at line 6 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 966 ORA-06512: at "SYS.WWV_DBMS_SQL", line 992 ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 649 ORA-06512: at "APEX_040100.WWV_FLOW_PROCESS", line 129      4
1
     0.14276     0.00050     ......component.type: APEX_APPLICATION_PAGE_PROCESS     4
1
     0.14326     0.00079     ......component.id: 64815543714133426115     4
1
     0.14405     0.00058     ......component.name: gen error     4
1
     0.14463     0.00067     ...Execute Error Handling Callout defined on Page or Application Level     4
1
     0.14530     0.00184     ...Execute Statement: begin declare l_error wwv_flow_error.t_error; begin l_error := wwv_flow_error.g_error; wwv_flow_error.g_error_result := apex_error_handling_example ( p_error => l_error ); end; end;     4
3
     0.14714     0.00055     ......Values changed by callout:     4
1
     0.14769     0.00049     .........message: MY.....MY ERROR PL/SQL: numeric or value error: character to number conversion error     4
1
     0.14818     0.00065     .........display_location: INLINE_IN_NOTIFICATION     4
1
     0.14883     0.00331     Region: Form on DEMO_CUSTOMERS     4
5
     0.15214     0.00174     Item: P2_ROWID NATIVE_HIDDEN     4
3
     0.15388     0.00090     Item: P2_CUSTOMER_ID NATIVE_NUMBER_FIELD
The debug output show that the custom error function is running and changing the display location from ON_ERROR_PAGE to INLINE_IN_NOTIFICATION, but there is something going wrong in this processing.
jon

Microsoft JScript Runtime Error, Line: 0, Error: Object Expected?

Hi,
I just got a new computer and I have Java 2 Runtime Environment SE v 1.4.2. I keep having problems with it. It says, "Microsoft JScript Runtime Error, Line:0, Error: Object Expected. I have no idea what to do or what is actually causing this. It shows up randomly when I have been using "Dell Jukebox by musicmatch" or even when I'm surfing. Can someone please help me fix the problem?
"Jay"

Hi,
I just got a new computer and I have Java 2 Runtime
Environment SE v 1.4.2. I keep having problems with
it. It says, "Microsoft JScript Runtime Error, Line:0,
Error: Object Expected. I have no idea what to do or
what is actually causing this. This is not a java err. It is a scripting error.
It shows up randomly
when I have been using "Dell Jukebox by musicmatch" or
even when I'm surfing. Can someone please help me fix
the problem?
"Jay" Someone can certainly help you - contact the website's webmaster & send them the err. They wrote it; they have to fix it.

Error 'Function module "IAOM_ACCOUNT_MANAGER" not found' in RPM_FIN02.

Hi,
When I am trying to run report RPM_FIN02 in ERP system, I am getting error ''Function module "IAOM_ACCOUNT_MANAGER" not found'.
Please note i have done required configration in both systems i.e. cProject and ERP.
Can somebody help me on this?
Regards,
Manoj

Thanks for your input.
This note is already implemented in our system.
Anyway my problem is solved.The problem was in our configration.
Regards,
Manoj

Hi, im getting an error message, "expected identifier" and another one, "expected expression" when i try a c program in xcode

hi, im getting an error message, "expected identifier" and another one, "expected expression" when i try a c program in xcode

You have errors in your C code. If you want anyone to be able to help you, you need to post the code. You also should tell us the version of Xcode you're using and the type of Xcode project you created for the C program.

ERROR: Function expected

Similar Messages

Maybe you are looking for