"Error getting device UUID" when adding the storage repository

I SAN Boot installed OracleVM-Server 2.2,then assign another LUN from storage to the Oracle server. The multipath tool I use is linux DMMP. Refer to user guide, I created partition and made filesystem on the LUN, then wanted to create it as the storage repository, but error appeared.
[root@archs21mxhh1 mapper]# fdisk mpath1
[root@archs21mxhh1 mapper]# mkfs.ocfs2 -Tdatafiles -N8 mpath1p1
[root@archs21mxhh1 mapper]# /opt/ovs-agent-2.3/utils/repos.py -n mpath1p1
Mount point: /tmp/ovsrepo_GLDuoJ
Error: errcode=00002, errmsg=Exception: Error getting device UUID: mpath1p1
Could anyone help me to solve the problem?
Thanks in advance.

user8919697 wrote:
[root@archs21mxhh1 mapper]# /opt/ovs-agent-2.3/utils/repos.py -n mpath1p1You need to use the full path to your device: /dev/mapper/mpath1p1.

Similar Messages

  • HT201407 I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to i

    I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.

    Where exactly did you get this phone?
    Do you have a SIM in the phone?
    There are 2 primary causes for this.
    Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it.

  • Not able to see Metadata fields when adding the fields to the rule in UCM

    Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

    Dhilipan,
    I am trying to setup AES at the current Customer.
    You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
    I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
    On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
    Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
    Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
    What I want to achieve is the following:
    When License type is 'EXCPT', system should default the type as 'C50'
    Should put the License type 'EXCPT' into the number field
    Should put the actual License# 'ENC' into the Supplement field
    Should put the ECCN # '5A002' into the Details field
    Thanks,
    Prashant.

  • Error when starting the Integration Repository/Directory

    When starting the Integration Repository or Directory I get the following error message when the Java Web Start is launched:
    <i>JAR resources in JNLP file are not signed by same certificate</i>
    I am running on XI3.0 SP15
    Any idea?
    Thanks in advance.
    Kind regards,
    Dave Arends

    Solved this issue.
    Go to Administration - Java Web Start Administration.
    Click on 'Re-initialization and force signings' and start the Repository or Directory again.

  • Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030

    Hi All,
    I have created an enhancement for ICWC component ICCMP_BP_DETAIL.
    While trying to diplay this using trn BSP_WD_CMPWB , I am getting the message
    Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030.
    What is the reason behind this? Also while testing this application the web page that
    opens up remains blank...
    Can anybody help me out with this?
    thanks
    Juhi Kulshreshtha

    Juhi,
    I meant Re: Error while loading the runtime repository in transaction BSP_WD_CMPWB
    check it out.
    Regards,
    Amar.

  • Internal error - access to IT_ADR2_L when adding E1BPADTEL/SMTP segments (i

    When Syndicating Customer Master Data from MDM to ECC (using an iDOC), I receive the following error....
    Internal error - access to IT_ADR2_L
    when adding data in  E1BPADTEL and E1BPADSMTP segments (in E1ADRMAS).
    Has anyone received this error?
    Thanks!!
    MMF

    Dear Harry
    I think there are any permission issue better to talk basis team, because  i has work in my side.

  • " Errors have been discovered when checking the Expense Report"

    Hi all,
    I am getting this following error while trying to review the New Travel request
    Error : " Trip cannot be saved in this status "
    "Errors have been discovered when checking the Expense Report. Please correct them in order to proceed"
    I am unable to save the travel request and I am stuck here.
    Can someone provide me with a solution to this.
    (We are using EP7, ESS 1.0 , EA-HR - 600,SP17 )
    Thanks in advance,
    NR

    Hi all,
    When i checked in the default trace file ... a statement " No end date for validity of trip schema PL defined in customizing. Infinite validity is assumed.# " is present ..
    can some tell me what needs to changed in the SPRO settings ...

  • "Error when interpreting the runtime repository"  BSP Component workbench

    Hello,
    I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
    I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
    Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
    Regards,
    Shobhit Srivastava

    Hi Pankaj,
    Try as above said
    find the enhancement Z_* bsp application ,compare it with SAP bsp application.
    if the XML file lost,
    add the xml file toZ_* BSP application..
    If it doesnt work leave it as it is.It will not affect your system.In our system also there is a  same error .
    Have a nice time!!!!!!!!!

  • "Error when interpreting the runtime repository"  for IUICOBJD component

    Hello experts,
    I create an enhancement set for IUICOBJD component, and the systems return my the error:
    "Error when interpreting the runtime repository"
    Then in ICWEB, this enhancement affect to the view  connectionObject. And this view doesn't appear.
    Someone had some problems to create an enhancement set for IUICOBJD component ??
    Is necesary to make somenthing  with IUICOBJ component before to create the enhancement for IUICOBJD.
    Could you tell me the steps to solve this??
    Thanks in advance.
    Best regards.

    Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
    Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
    I haven't any problems with other components for example with IUICMD the enhancement run ok.
    Thanks in advance.
    Best regards.

  • Error: Encountered a SELECT WHEN EXPECTING the following ( + - all mod num

    I have a conditional INSERT statement where I update the record if todays date is found in the table or i will INSERT a new record if that date is not found..
    Insert statement that comes after ELSE works fine but IF part fails with the error
    encountered a select when expecting the following
    *( - + all case mod new null.. and lot more*
    IF EXISTS
    (SELECT (TO_CHAR(UpdateDate, 'MM/DD/YYYY')) FROM EmployeeUpdateEmails
         WHERE UpdateDate = select (TO_CHAR(sysdate, 'MM/DD/YYYY')) from dual)
         UPDATE EMPLOYEEUPDATEEMAILS
    SET EMP_MGR_TOTAL_CHANGES = total
         WHERE UpdateDate = select (TO_CHAR(sysdate, 'MM/DD/YYYY')) from dual
    ELSE
    This is how EmployeeUpdateEmails table is created
    CREATE TABLE EmployeeUpdateEmails
    UpdateNum SMALLINT          PRIMARY KEY,
    UpdateDate               DATE,
    Emp_Mgr_Total_Changes SMALLINT,
    Emp_Term_Total_Chnages SMALLINT
    Please Help

    IF EXISTS is not aproppriate syntax:
    SQL> declare
      2  begin
      3   if exists (select count(*) from dual)
      4   then
      5     dbms_output.put_line('it exists');
      6   else
      7     dbms_output.put_line('it doesn''t exist');
      8   end if;
      9  end;
    10  /
    if exists (select count(*) from dual)
    ERROR at line 3:
    ORA-06550: line 3, column 5:
    PLS-00204: function or pseudo-column 'EXISTS' may be used inside a SQL statement only
    ORA-06550: line 3, column 2:
    PL/SQL: Statement ignored
    SQL> declare
      2   my_var number; 
      3  begin
      4  
      5   select count(*) into my_var
      6   from   dual;
      7  
      8   if my_var >= 1
      9   then
    10     dbms_output.put_line('it exists');
    11   else
    12     dbms_output.put_line('it doesn''t exist');
    13   end if;
    14  end;
    15  /
    it exists
    PL/SQL procedure successfully completed.If you're using SQL then
    1) post the complete statement
    2) mention your database version ( the result of: select * from v$version; )
    3) consider using CASE:
    SQL> select case
      2           when (select count(*) from dual) >= 1
      3           then 'it exists'
      4           else 'it doesn''t exist'
      5         end
      6  from   dual;
    CASEWHEN(SELECTC
    it exists
    1 row selected.

  • What does error code 50 mean when installing the creative cloud app?

    what does error code 50 mean when installing the creative cloud app?

    Hello,
    This thread may help
    Error code 50
    Let us know!
    Regards,
    Jo-Marie

  • Getting email but when opened the message isn't from sender, from 2008

    Just started today. Getting email and when opening the message is from an old email Dec 2008 and not from sender. I have Aol as isp and the good message is on aol. What is up?

    You mean in Safe Boot attempt, the Radian never stopped?
    "Try Disk Utility
    1. Insert the Tiger Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

  • GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)

    제품 : OFSA_PA
    작성날짜 : 2003-04-25
    GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)
    ========================================================================
    PURPOSE
    Problem Description
    고객이 PA에서 Menu -> "Undo" 화면을 선택하면
    무시닫기 에러(GPF)가 발생함.
    Workaround
    Solution Description
    DATA_IDENTITY table에 16000 rows보다 더 많이 들어가 있으면 발생한다.
    그러므로, 과거 data 즉, undo가 필요 없는 자료를 삭제를 해야한다.
    Reference Documents
    note : 134609.1

    Hi Titan, this sounds like an IE security setting issue. Things to do:
    1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
    2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
    3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
    cameron rautmann

  • How to Given the Message when Adding the Marketing Documents

    Hello Experts,
    I have Required only Message for when Adding the Markeing Documents that times
    I want give the message for  " Please Check the Control Account"
    Is IT Possibal  in SAP
    Dixit Patel

    Hello Dixit Patel,
    It is possible but that need SDK coding.
    Thanks,
    Gordon

  • Can't get my mail when use the USB Ethernet adapter

    I can't get my mail when use the Apple USB Ethernet Adapter. If I use a wireless connection, there is no problem. The LAN which I'm trying to connect is behind a proxy server but the Internet is working 100%.

    Hi ViK,
    This sounds like a question for the network administrator of the location. Without knowing how the proxy is set it's impossible to know what it's blocking (incoming/outgoing). It sounds like it might be filtering the incoming mail server.

Maybe you are looking for