Error handling for file upload

HI Experts,
I have a question on file upload process in sap MDG-S.
Scenario : Upload the content from a CSV file using the file upload prcoess.
Query : For example if there are 5 records in the file and if there is an error in 3rd record what happens to the rest of the records i.e. 1,2 and 3,4.
a) Will record 1 and record 2 get posted and record 3,4 will be failed?
b) All 4 records will not be posted as there is one errored record.
Regards,
Charita.

Hi charitha,
As per your request if there is a error in any of the record in a particular file it does'nt loads any of the fields to the target, it will be terminated with an error.
As i checked with an example of Space delimited file in which 4th field has no spaces, and i used this file as source and run the job it does'nt return any values but terminated with an error.
let me know if i am right..
Regards,
Amjad

Similar Messages

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

Difficulties in creating a JSP for File upload

hello out there,
im trying to create a ProcessUpload.jsp File which should handle a file upload from a channel in the portal. regarding a previously posted thread acording to fileupload i deployed this jsp-file in the regular webServerHierarchy so that you dont have to go into the desktopServlet Portal, which cant handle fileUpload.
its location is this ../portal/test/ProcessUpload.jsp and it uses CustomTags referecens from /portal/WEB-INF/test.tld. i customized the deployment descriptor in /portal/WEB-INF/web.xml as well. but as soon as i try to put a taglib which uses this custom tags the server responses with an error.
does anybody know how to deploy a global jsp file to handle file uploads, or something in particular how to deploy jsp with custom tags outside the desktopservlet but inside the portal webapp??
i would be really thankful ;-)
best regards
martin

hi alex,
i allready tried to realize a channel with file upload download. channels are made up of jsp pages and when i am forwarding my form with enctype="multipart/form-data" encoding the desktop-servlet intercpets my entity-body.
so what kind of channel you have thought about ??
thanks for reply ;-)

BI IP --- Planning function for File Upload

Hai All,
In BI IP , When I am trying to load the data (text file) by using Planning function for File Upload. I am getting an error message When I am clicking on Update .
Error Message : Inconsistent input parameter (parameter: <unknown>, value <unknown>).
In Text file I am using Tab Separation for each value
Anyone help me out.
Thanks,
Bhima

Hi Bhima
Try one of these; it should work:
1. If you are on SP 14 you would need to upgrade to SP 15. It would work fine
2. If not, then -
a] apply note 1070655 - Termination msg CL_RSPLFR_CONTROLLER =>GET_READ_WRITE_PROVIDS
b] Apply Correction Instruction 566059 [i.e: in Object - CL_RSPLFR_CONTROLLER GET_READ_WRITE_PROVIDS,
delete the block: l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = p_infoprov ).
and insert block - l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = i_infoprov ).
Goodluck
Srikanth

Error while during file upload in JSF

Hi
I do get this error while uploading a file in JSF .
org.apache.myfaces.webapp.filter.MultipartRequestWrapper.parseRequest(MultipartRequestWrapper.java:134)
     at org.apache.myfaces.webapp.filter.MultipartRequestWrapper.getParameter(MultipartRequestWrapper.java:163)
     at javax.servlet.ServletRequestWrapper.getParameter(ServletRequestWrapper.java:157)
     at com.sun.faces.context.RequestParameterMap.get(ExternalContextImpl.java:673)
     at jsf.PagePhaseListener.afterPhase(PagePhaseListener.java:18)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:211)
Can anybody wat i must do

thanks....
but that answer is not solve my question. Actually i want to know.. can we develope a custom tag in JSF for file upload......

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

Error handling for a save button

hi. how do i get error handling say in a button, and then to give an error to the user, without crashing the whole application. can any one point me to any articles, tried searching , and not finding wxactly what i am looking for. thanks.
http://startrekcafe.stevesdomain.net http://groups.yahoo.com/groups/JawsOz

hi. maybe i did not make my self clear. okay, here's how this button works, you have a open dialog button, and a open dialog box, you click the file, and it loads in the data grid. now you click on the save button, and a message says file was saved, need
try / catch code, to catch this, if the file was not saved, or other errors, then a error friendly message, any code for this. read the article, but need a specific error handler for the save button, like i had for the open dialog file dialog box. any suggestions,
or links, to look at sample code. thanks.
http://startrekcafe.stevesdomain.net http://groups.yahoo.com/groups/JawsOz

Change upload file name with com.oreilly.servlet.MultipartRequest to handle the file upload

1. when use com.oreilly.servlet.MultipartRequest to handle the file upload, can I change the upload file name .
2. how com.oreilly.servlet.MultipartReques handle file upload? do it change to byte ?
what different? if I use the following method?
   File uploadedFile = (File) mp.getFile("filename");
               FileOutputStream fos = new FileOutputStream(filename);
                byte[] uploadedFileBuf = new byte[(int) uploadedFile.length()];
               fos.write(data);
             fos.close();

My questions are
1) when use oreilly package to do file upload , it looks like i line of code is enough to store the upload file in the
file direction.
MultipartRequest multi =
        new MultipartRequest(request, dirName, 10*1024*1024); // 10MB
why some example still use FileOutputStream?
outs = new FileOutputStream(UPLOADDIR+fileName);
    filePart.writeTo(outs);
   outs.flush();
outs.close();
2) can I rename the file name when I use oreilly package?

URGENT! File Upload Utility or a Custom UI for File Upload is needed!

Hi all,
I'm trying to find or develop a file upload utility or custom user interface rather than editing and adding file type item to a page. There is a free portlet for file upload in Knowledge Exchange resources, but it is for 3.0.9 release. I'm using portal 9.0.2.
I could not any sample about the new release. Also API such as wwsbr_api that is used to add item to content areas is out dated.
I create a page with a region for "items". When "edit" page and try to add an "file" type item the generated url is sth like this;
"http://host:7779/pls/portal/PORTAL.wwv_additem.selectitemtype****"
After selecting item type as a simple file autogenerated url is sth. like ;
"http://host:7779/pls/portal/PORTAL.wwv_add_wizard.edititem"
I made search about these API but could not find anything (in PDK PL/SQL API help, too).
I need this very urgent for a proof of consept study for a customer.
Thanks in advance,
Kind Regards,
Yeliz Ucer
Oracle Sales Consultant

Answered your post on the General forum.
Regards,
Jerry
PortalPM

Error handling for work item

Dear All,
     When I trigger my workflow from SWUE,the workflow containers must be populated with agent name.But it is populated only with 'US'.Please suggest.
     On the other hand, when I trigger my workflow from ME21N,the workflow goes into error.The error statement is "Exception occurred - Error handling for work item 000000954797".What is the problem?
    Please suggest the solution for which I will be grateful.
Thanks and regards,
S.Suresh

Dear ,
I use bus2012 as BOR and event as created.
When I create purchase order from ME21N,bus2012 is not triggering.Instead FREBUS2012 gets triggered which is a subtype of bus2012.
At SWETYPV,event linkage is activated only for BUS2012 and there is no entry at SWETYPV for FREBUS2012.
Though I configured the workflow with start events:BUS2012->created,why FREBUS2012 should trigger my workflow which is not seen in SWETYPV?How to override it?Please suggest.
There is no start conditions for my workflow.Whenever purchase order is created,this workflow should trigger.
So,the parameters passed between even to workflow are
&_EVT_OBJECT&    ->        &BUS2012&
&_EVT_CREATOR&   ->     & WFINITIATOR&
Thanks and regards,
S.Suresh

Error handling for RGB values

Hi
I am having problems doing error handling for RGB values. I have a Java applet with 3 JTextFields whose values are parsed as int variables and stored as ints. If a value is entered that is not a value between 0 and 255 is entered, the appropriate field/s should be set to an empty string.
The problem I am having is that I am using try/catch block to try to parse as an int but then it breaks out of execution completely.
I hope this makes sense and that someone can help.
Thanks!

this is because your code is probably inside one giant try catch block, what you need to do is have small ones in places where you do the parsing.
post code and i can show you how to modify it

Option for error handling for DTP, ' no updata, no reporting" and "deactiva

Hello Gurus,
     option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,

On the Update tab page, specify how you want the system to respond to data records with errors:
                            a.      No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                            b.      Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                            c.      Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru

Error Handling for Outbound IDOC - COSMAS (Cost Center Master)

Hi,
I need to trigger a mail to SAP inbox whenever a outbound idoc fails for any reason.
I know how to do it for inbound or outbound transaction data, but not sure how to do error handling for outbound master data.
Could one of you help me understand the same.
Thanks in Advance,
Vinoth

Hey Vinoth,
Do you want decide the recipient of the mail dynamically? am asking because if you give the USER NAME in the partner profile and when ever a IDOC fails a mail will automatically reach the user inbox automatically
let me know if i answered ur question.
Thanks,
Santhosh

Latest Error Handling for Dynamic Actions

Is there any documentation on the Latest Error Handling for Dynamic Actions?

BillC,
Interesting that I was looking around for the same thing after seeing a Foreign Key violation in my application.
I found this article by Patrick Wolf:
APEX 4.1 – Error Handling Improvements – Part 1
http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
I believe you need to be on 4.1 or later though.
Thanks,
Joe

3.2 to 4.1 Upgrade - Error Handling for Unavailable Database Links

Hi,
I'm having a 3.2 -> 4.1 upgrade issue related to error handling for failed database links.
I have a conditional Exists button on a page that has a SQL query to linked tables. However, for the 10 minutes every day where the target of the database link is getting a cold backup, the query fails. In the old 3.2 apex I simply got an error inside the region where the button is located but otherwise the page was still visible:
"Invalid exists/not exists condition: ORA-02068: following severe error from MYDBLINK ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist"
However, in apex 4.1.0.00.32 I get the following unhandled error, and clicking "OK" takes me to the edit page when logged in as developer.
i.e., the page can't be run at all while the database links are failing in this one region.
Error Error processing condition.
ORA-12518: TNS:listener could not hand off client connection
Technical Info (only visible for developers):
is_internal_error: true
apex_error_code: APEX.CONDITION.UNHANDLED_ERROR
ora_sqlcode: -12518
ora_sqlerrm: ORA-12518: TNS:listener could not hand off client connection
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 4
component.name: Current Alerts
error_backtrace:
ORA-06512: at "SYS.WWV_DBMS_SQL", line 1041
ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 687
ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 272
General users see this:
Error Error processing condition.
ORA-01034: ORACLE not available ORA-02063: preceding line from MYDBLINK
clicking "OK" takes user to another page, not sure how apex decides which, but not a concern at the moment.
I've done a search and read the page http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ but the new apex error handling isn't clear to me, and I don't know if the apex_error_handling_example provided on that page would be applicable to this situation.

Thanks Patrick.
The PL/SQL Function Body returning boolean condition with:
begin
    for l_check in (
      SELECT 1
       FROM myview@MYDBLINK
      WHERE ... ) loop
        return true;
    end loop;
    return false;
exception when others then
    sys.htp.p('Invalid exists/not exists condition: ' || sys.htf.escape_sc(sqlerrm));
    return false;
end; Resulted in a similar issue:
Error Error processing condition.
ORA-04052: error occurred when looking up remote object MYLINKUSER.myview@MYDBLINK
ORA-00604: error occurred at recursive SQL level 3
ORA-01033: ORACLE initialization or shutdown in progress
ORA-02063: preceding line from MYDBLINK
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.CONDITION.UNHANDLED_ERROR
ora_sqlcode: -4052
ora_sqlerrm: ORA-04052: error occurred when looking up remote object MYLINKUSER.myview@MYDBLINK
ORA-00604: error occurred at recursive SQL level 3
ORA-01033: ORACLE initialization or shutdown in progress
ORA-02063: preceding line from MYDBLINK
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 4
component.name: Current Alerts
error_backtrace:
ORA-06512: at "SYS.WWV_DBMS_SQL", line 904
ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 588
ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 148However, I created a view with the same query:
CREATE OR REPLACE VIEW v_localview (ALERT_1)
AS
SELECT 1
FROM myview@MYDBLINK ...then change the condition to look at the local view:
begin
    for l_check in (
      select alert_1 from v_localview ) loop
        return true;
    end loop;
    return false;
exception when others then
    sys.htp.p('Invalid exists/not exists condition: ' || sys.htf.escape_sc(sqlerrm));
    return false;
end;As a view is simply a query I'm surprised this should make any difference but it now looks similar to the 3.2 error, inside the region, when the linked database gets its morning cold backup, and this is fine:
Invalid exists/not exists condition: ORA-12518: TNS:listener could not hand off client connection

Error handling for file upload

Similar Messages

Maybe you are looking for