. Error ID 23000 - when trying to publish a project.- Project Server 2013
Error:
Your queue job ProjectPublish failed. Please contact your administrator for assistance
Your ProjectPublish job failed. Its current state is Failed. It was 0% complete. It entered the queue at 06/05/2013 16:09:42.
To get more information about the job failure, please go to Project Web App. Select Personal Settings from the left menu. Then select My Queued Jobs.
The errors returned from the queue are as follows:
Error ID: 23000
Error ID: 26000
Detailed error below - send it to the administrator for more detailed troubleshooting.
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
<class name="Microsoft.Office.Project.Server.BusinessLayer.Queue.Message">
<error id="23000" name="ProjectPublishFailure" uid="7abaf2fb-f1cd-e211-940c-00155d0c1708" projectuid="494fbfae-c1b8-e211-9359-08edb9db97cb" messagetype="Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.SynchronizeTaskListInManagedModeMessage"
messageID="38" stage="" blocking="Block" />
</class>
<class name="Queue">
<error id="26000" name="GeneralQueueJobFailed" uid="7bbaf2fb-f1cd-e211-940c-00155d0c1708" JobUID="ddafa1ed-f1cd-e211-a5f3-001d0925b148" ComputerName="75cc0cd2-d97d-405c-9115-7722945b1400"
GroupType="ProjectPublish" MessageType="SynchronizeTaskListInManagedModeMessage" MessageId="38" Stage="" CorrelationUID="fc70229c-ba49-90cf-b140-0bba2cbd6e91" />
</class>
</general>
</errinfo>
You can do the following:
1. Try troubleshooting using the error IDs, error XML.
2. Contact administrator with your jobID (ddafa1ed-f1cd-e211-a5f3-001d0925b148) and error XML.
To turn off these notifications, go to PWA Settings, and then click Manage My Alerts and Reminders.
From this page, you can clear the check box for those notifications you no longer want to receive.
Microsoft Project Server
---=======----
Any Suggestion / Help is greatly apprciated
Alim
We get a very similar message when we publish our projects (not project specific and no resources assigned to summary level tasks):
Your ReportingWSSSync job failed. Its current state is FailedNotBlocking.
It was 0% complete. It entered the queue at 06/10/2014 17:00:56.
To get more information about the job failure, please go to Project Web App.
Select Personal Settings from the left menu. Then select My Queued Jobs.
The errors returned from the queue are as follows:
Error ID: 24018
Error ID: 24016
Error ID: 26000
Detailed error below - send it to the administrator for more detailed troubleshooting.
<?xml version="1.0" encoding="utf-16"?>
<errinfo>
<general>
<class name="Reporting Wss list sync failed">
<error id="24018" name="ReportingWssSyncListFailed" uid="f8900f4b-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="aa162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="b3162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="bf162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="c8162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
<error id="24018" name="ReportingWssSyncListFailed" uid="d1162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
</class>
<class name="Reporting message processor failed">
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="fb900f4b-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="ad162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="b6162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="c2162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="cb162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
<error id="24016" name="ReportingWSSSyncMessageFailed" uid="d4162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
</class>
<class name="Queue">
<error id="26000" name="GeneralQueueJobFailed" uid="d5162251-e2f0-e311-80d4-005056a93b51" JobUID="ec900f4b-e2f0-e311-80d4-005056a93b51" ComputerName="54374067-1d9a-4ecf-8b03-917d8b538489" GroupType="ReportingWSSSync"
MessageType="WSSSyncMessageEx" MessageId="1" Stage="" CorrelationUID="1e9c999c-6bad-d0e0-95e7-d44efff43e4b" />
</class>
</general>
</errinfo>
Any help would be greatly appreciated!
Todd
Similar Messages
-
I keep getting error code 3131 when trying to publish a ping playlist -- help!!!
I keep getting error code 3131 when trying to publish a ping playlist -- help!!!
Same problem. I make playlists on Ping so the listeners of my podcast can easily download the songs I talk about. But for **** near 2 weeks now I can't edit a playlist or add a new one. When are they gonna fix this?
-
Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder
Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process. -
An Active Directory error 0x51 occurred when trying to check the suitability of server
We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
when opening up Exchange Management Console on one of the exchange 2010 server.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
response: The LDAP server is unavailable.'
dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message.
If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
to point it to the correct domain controller using power shell?I fixed it for myself.
Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
-
Error with Flash when trying to publish
Hi,
I am currently working on a project in Flash and I can not
publish, test or view the action script. I have around 20 different
Flash files that I have created but only 2 work 100% fine. But last
week they were all working fine.
When I try to open the SWF it is all blank!
Here is the error code, AppName: flash.exe AppVer: 9.0.0.494.
I am not the only person to have this issue, as the link will
prove,
http://www.developmentnow.com/g/68_2007_9_0_0_1021366/Constant-error-message-Need-Help.htm
I have also re-installed Flash 9 so thats made it even more
confusing, I presumed it was a bug. Therefore I may need to contact
Adobe if no one has any answers.
Does anyone know why this is happening?Well, if your files are all on the same drive as Flash then
that would rule out any problems with network files (it's not safe
to keep FLA's on network drives...)
Please open a support case. You can do that via web or
phones:
http://www.adobe.com/support/flash. -
Error: Invalid Parameter when trying to extend volume in Windows Server 2012
From VMware, I added space to a Hard Drive to a Windows Server 2012 VM. I then went into the WinServer console, and opened Disk Management. I did a rescan on the disk. It found the extra space. I right mouse click on the Disk,
and choose Extend Volume, choose the available space, and then an error returned of 'Invalid Parameter'.
In Disk Manager, the new larger space is assigned, but Windows Explorer and everything else only recognizes the original smaller size.
EventManager shows Event ID 265: A pointer device did not report a valid unit of angular measurement. Event ID 257: A pointer device reported a bad angular physical range. Event ID 258: A pointer device reported a bad angular logical range.
Anyone have a solution for this problem?Hi,
Please try to use the command line utility diskpart to extend the drive.
1. Open a command prompt
2. Type in diskpart
3. Type list volume
4. Type select volume #
5. Type extend [size=n] [disk=n]
For more detailed information about diskpart, please see:
DiskPart Command-Line Options
http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
You could refer to the article below to troubleshoot the issue:
Windows Server 2008 drive doesn’t expand correctly after extending in VMware VI client
http://consultingblogs.emc.com/greggrobertson/archive/2010/05/27/windows-server-2008-drive-doesn-t-expand-correctly-after-extending-in-vmware-vi-client.aspx
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
This issue is driving us nuts - there are no issues with Domain Controllers or AD in this environment. The server it is citing in the error has been retired - it was gracefully dcpromo'ed down and removed from the environment. DNS has no record of it, nor is it located anywhere else. We are not able to log into Outlook Web App either with authentication failed errors - and I can't help but expect these 2 issues are related? I tried hard coding the Configuration Domain Controller at the org level, as well as using the -staticdomaincontrollers and -staticglobalcatalogservers with the "Set-ExchangeServer" powershell command - no luck.... System settings of the exchange 2010 servers show they are pointing to the correct DCs - but I still get this error accompanied with long delays in rendering windows in EMC. Extremely frustrating..... I have an issue logged with MS now, but they aren't looking at them until Nov 9. Has anyone seen this issue at all? More info on the OWA config - using Form based auth, and I'm not able to perform a simple test-owaconnectivity -mailboxcredential (get-credential\username) -allowuntrustedcertificate -allowinsecurelogon - please help
Create a "global catalog" on the 2nd domain contoller, will fix this problem.
To create a new global catalog:
On the domain controller where you want the new global catalog, start the Active Directory Sites and Services snap-in. To start the snap-in, click Start , point to Programs , point to Administrative Tools , and then click Active Directory Sites and Services .
In the console tree, double-click Sites , and then double-click <var>sitename</var> .
Double-click Servers , click your domain controller, right-click NTDS Settings , and then click Properties .
On the General tab, click to select the Global catalog check box to assign the role of global catalog to this server.
Restart the domain controller. -
I cannot get the trial version of MS Project 2013 to load onto my computer.
I keep getting "Microsoft Setup Bootstrapper Has Stopped Working" error message when attempting to download.What operating system are you attempting to install to?
-
Hi sir,
I have Some Issue during Upadte Assigment in ps 2013.
PJClientCallableException: ProjectHasWriteLock
vijayHi Amit,
Does the resource has some actuals in the project? In case it has, you cannot delete or replace a resource with actual work neither with PSI nor CSOM. See reference
here.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Keep getting error message when trying to publish imovie '08
I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
thanks,That error usually means "Disk Full". Could that be the issue?
-
Adobe Captivate 6.0 fatal error when trying to publish
Currently working on Adobe Captivate 6.0 and recently have experienced a fatal error message when trying to publish my project. The fatal error message creates a backup and requests to restart Adobe Captivate.
Hello ,
Welcome to Adobe Forums!
Could you please check the exact version of Adobe Captivate you are using (Go to help > About Adobe Captivate)?
Are you having the same issue with other projects as well ?
Please make sure the project files and published folder should be on local computer and not on any network location.
Thanks
Himanshu -
Error message when trying to publish to iWeb
Got following message when trying to publish:
Publish Error: Asn error occurred while publihing file "/Web/Site/
iWeb/Dryton/Welcome_files/
navbar1rollover.png".
What does this mean? How can i fix.If you're publishing to .Mac, try File > Publish All to .Mac
-
I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish. -
I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?
Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
Client ADI App File Server Connection error when trying to publish report.
Our users are having intermittent problems when trying to publish reports from their Client ADI process to Excel. They are receiving the error:
"An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"
The problem is this issue will be present for a user and then for no reason that user will be able to publish reports again. Or several users will get this error and one user will be able to publish reports. The only consistency is when it errors out they get this message. The listener appears to be up and running as well.
We are running 11.5.10.2 and ADI version: 7.2.12
Any helps or tips would be appreciated."An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"Please see these MOS docs.
ADI: Troubleshooting Connection Problems with ADI/GLDI [ID 70669.1]
Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection" [ID 117012.1]
How To Validate FNDFS For Applications Desktop Integrator - ADI [ID 364796.1]
ADI: Unable To View Reports In ADI [ID 1018797.102]
Can not View Reports Submitted through ADI/Request Center [ID 135128.1]
ADI RRA:Prefix When Connecting to Server with Muiltple Apps Instances [ID 201492.1]
ADI Application File Server Connection Error [ID 146220.1]
Thanks,
Hussein
Maybe you are looking for
-
Every time I try to update my apps on my iPad, it tells me that my apple ID has been disabled.
I try to update my apps on my iPad, and the message pops up telling me my apple ID is disabled. I don't know why this would happen or how to fix it. help!!!
-
Unable to edit table data, but not for all tables
I have multiple tables in a schema. For some tables, I am able make edits to table data directly, i.e., context menu Table | Open, and the Data tab. When I am able to edit, I do get a pencil icon inside the cell I am editing/typing (and am able to co
-
I have created stored procedure with %rowtype as IN OUT parameter.I want to
i have created stored procedure with %rowtype as IN OUT parameter.I want to call it in java program
-
Hello Arch community, i´m back to Arch. After using it for nearly 3 years, i´ve used Kubuntu nearly a half year, because thats the "standard" Linux Distri used at my chair in university. I´m very happy, that i can use ARCH again. So long so good. Let
-
Flash and Shockwave Won't Play in Safari 4.0.1
I recently got a MBP. After doing additional software installation, I now find that I cannot play anything at youtube.com. I made sure I had the latest Flash Player version. It's working in Firefox but not in Safari. When I try to view an article at