Error importing CSElement Error Number -12075
While import I am getting this error. I did not find any explanation for this error anywhere.There is absolutely no documentation available anywhere how do I find out the cause of this error. Any pointer to where to look this error number OR what could be causing this to happen. I have removed just one line from CSElement jsp file.
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [CSElement:1374063441436] and the error number is -12075
Hi sameerbo,
When publishing, the CSElement is updated if it has the same id. If you have a CSElement with the same name but another id on the target then you'll get an error.
If you're using CSDT to import, then it goes by the fw_ui column instead of the id.
Errno -12075 means "An asset of this type already exists using this name." It's documented in the tag reference guide, under Errors -> errno. See: errdetail Error Values
Kind regards,
Stephan.
Similar Messages
-
Aperture 3 - Error Importing Library
Hi folks!
My Macbook's hard drive crashed so I had to reinstall OSX 10.6 and use the time machine to bring the stuff back.
After reinstalling everything I also updated OSX to 10.6.7 and and finally updated Aperture to 3.1.2 via App Store.
Then I tried to open the Aperture 3 and this happened:
Error Importing Library
Now if I go to File/Switch to Library/Other/New... there is a new library called "Aperture Library (current default)" (Version 3.1.2) including zero versions and masters.
My old library is automatically renamed as "Aperture Library_Original" including 17xxx versions... (Version 3.1.1)
I've tried to rebuild the library etc etc but it won't do it and gives the same Error Importing Library error all the time.
Now I even reinstalled everything again, installed 10.6.6 and now my Aperture is also 3.1.1. Still the same error comes..
Do you guys/girls have any idea what to try next?
Thank you in advance!
Tohlo
FinlandOops, not sure whether using References or Managed.. But I would bet that Managed..
Those other 2010 folders are from the time before Aperture 3, I purchased Aperture about 2 months ago via App Store.
Default Picture folder contains Aperture Libraries, iPhoto library, Photo Booth folder and few of those random 2010_ picture folders.. Don't even know why those are there anyway..
but but.. I'm now already starting to think that I've almost all of the pics in iPhoto..
If in Finder I right-click my old Aperture Library and choose "Show content" (or something like that, my OSX is in Finnish) - I'm able to find those few new albums and their photos which are not in iPhoto.. If I just copy those to iPhoto and Import it again.. Naturally I would loose the project structure I've created in Aperture and few edited photos.. but at least I would get my Aperture back again and forget that this incident ever happened.. -
Scenario Export /Import Issue: Import file error
The Procedure scenario when I am trying to import in higher environment, it is giving me error " Import file error" and when I click on Details, it shows following message.
I am trying to import scenario with INSERT/UPDATE mode and trying to replace with the same version. The scenario is executing fine in dev environment. What could be the cause. I have tried importing the same, 2-3 times ...even on different days with connecting and disconnecting the repository. What could be the reason. I am exporting the scenario from designer/procedure/scenario. using same option, I have exported the scenario many times but did not get any issue so far while importing into higher environment
&Exception track Trace 1 of 1
com.sunopsis.dwg.SQLWorkReposException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at $Proxy3.executeUpdate(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$StatementInvocationHandler.invoke(RuntimeClassLoaderDataSourceCreator.java:163)
at $Proxy4.executeUpdate(Unknown Source)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
at com.sunopsis.dwg.dbobj.generated.GeneratedSnpObjectId.insertAction(GeneratedSnpObjectId.java:271)
at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2885)
at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2908)
at com.sunopsis.dwg.DwgObject.createMissingReference(DwgObject.java:6779)
at com.sunopsis.dwg.DwgObject.correctMissingReference(DwgObject.java:6636)
at com.sunopsis.dwg.DwgObject.correctMissingReferences(DwgObject.java:7206)
at com.sunopsis.dwg.DwgDuplicationTools.createMissingRefAndReInsert(DwgDuplicationTools.java:2790)
at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2385)
at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6205)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5410)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:360)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1221)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)actdi wrote:
This error is weird.+1 thats what I was thinking.
OP - Are you exporting from a Development work repos to an Execution Repos or another Dev Repos? -
Error Importing - Disk Space when there is plenty of Space
Hello,
I am trying to import small .avi movies into iMovies. When I do, it states that there is a Error Importing due to not enough Disk Space. I have 24GB of disk space available, however, inside the iMovie application it states that there is only 20kb available. Has anyone come across this?
Thank you
LeovilleI had the same problem. The following steps worked for me.
1. In iTunes on my Mac, on the Summary page for my iPhone, under "Options" I clicked "sync only checked songs and videos."
2. On the "Music" page, I clicked Sync Music and then clicked "Selected playlists, albums," etc. underneath.
3. IMPORTANT! make sure that the "automatically fill free space with songs" is NOT clicked. My computer kept clicking that one automatically and I had to keep turning it off.
4. I clicked one playlist or album at a time and watched the status bar (below) to see how much space was being taken up (the blue line).
5. When I had as much music as I wanted, I clicked Apply.
It turned out that I had one play list which, for some unknown reason, had a huge number of songs on it and that was clogging up the works. When I unchecked it, I had enough room for the rest.
I hope this helps! -
Custom TCode for Excel File Upload/Import - WebGUI Error
We get an ABAP runtime error when uploading an excel file with a custom tcode using WebGUI. It works ok with WinGUI. Any ideas what could be causing that error?
Runtime Errors RAISE_EXCEPTION
Date and Time 01/05/2011 17:27:16
Short text
Exception condition "JAVABEANNOTSUPPORTED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "C_OI_CONTAINER_CONTROL_CREATORCP" raised the
exception
condition "JAVABEANNOTSUPPORTED".
Since the exception was not intercepted by a superior
program, processing was terminated.You can use the below code. One more thing while running make sure there is no unsaved excel sheet open in your system.
FORM sub_create_container .
Create Instance control for container
CALL METHOD c_oi_container_control_creator=>get_container_control
IMPORTING
control = iref_control
error = iref_error.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
Create generic container linked to container in screen 100
CREATE OBJECT oref_container
EXPORTING
container_name = 'CONT'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Error while creating container'(012).
ENDIF.
Establish connection to GUI Control
CALL METHOD iref_control->init_control
EXPORTING
inplace_enabled = c_check
r3_application_name = 'EXCEL CONTAINER'
parent = oref_container
IMPORTING
error = iref_error
EXCEPTIONS
javabeannotsupported = 1
OTHERS = 2.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
Create Document Proxy
CALL METHOD iref_control->get_document_proxy
EXPORTING
document_type = soi_doctype_excel_sheet
IMPORTING
document_proxy = iref_document
error = iref_error.
IF iref_error->has_failed = c_check.
CALL METHOD iref_error->raise_message
EXPORTING
type = 'E'.
ENDIF.
ENDFORM. " SUB_CREATE_CONTAINER
FORM sub_create_document USING p_sheet TYPE i.
DATA: l_title TYPE char40,
l_char TYPE char2,
l_time TYPE i,
l_sheet TYPE char12.
Calculate the number of sheets to be created
l_time = p_sheet - 1.
CONCATENATE 'Assembly Table'(015) v_char INTO l_title
SEPARATED BY space.
Create document
CALL METHOD iref_document->create_document " Open use Open_document method
EXPORTING
open_inplace = c_check
document_title = l_title
no_flush = c_check
IMPORTING
error = iref_error.
Open Spreadsheet interface
CALL METHOD iref_document->get_spreadsheet_interface
EXPORTING
no_flush = c_check
IMPORTING
sheet_interface = iref_spreadsheet
error = iref_error.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
EXPORTING
no_flush = c_check
IMPORTING
sheets = i_sheets
error = iref_error.
Reaname he sheet
READ TABLE i_sheets INTO wa_sheets INDEX 1.
l_char = p_sheet.
CONCATENATE 'Sheet' l_char INTO l_sheet.
CALL METHOD iref_spreadsheet->set_sheet_name
EXPORTING
newname = l_sheet
oldname = wa_sheets-sheet_name
no_flush = c_check
IMPORTING
error = iref_error.
REFRESH i_sheets.
CLEAR: l_char,
l_sheet.
Add sheets
DO l_time TIMES.
l_char = sy-index.
l_char = p_sheet - l_char.
CONCATENATE 'Sheet' l_char INTO l_sheet.
CALL METHOD iref_spreadsheet->add_sheet
EXPORTING
name = l_sheet
no_flush = c_check
IMPORTING
error = iref_error.
ENDDO.
Get number of sheets
CALL METHOD iref_spreadsheet->get_sheets
EXPORTING
no_flush = c_check
IMPORTING
sheets = i_sheets
error = iref_error.
SORT i_sheets BY sheet_name DESCENDING.
ENDFORM. " SUB_CREATE_DOCUMENT
FORM sub_save_document .
DATA: l_changed TYPE int4.
Save the document
CALL METHOD iref_document->save_as
EXPORTING
file_name = p_file
no_flush = c_check
IMPORTING
error = iref_error.
Close the document
CALL METHOD iref_document->close_document
EXPORTING
do_save = c_check
no_flush = ''
IMPORTING
has_changed = l_changed
error = iref_error.
ENDFORM. " SUB_SAVE_DOCUMENT
Thanks
Subhankar -
Error import / export in console standalone
hai all,
error import / export in console standalone
iam logged in 9i console standalone pc not connected any other pc.
unable to import or export or load any database
because the error shows that
only on OMS mode is possible
how can import or export or load?
any help?
thanks in advance
rcs
------I have no idea what you are asking or in what environment you are work.
Lets start with the need for a version number ... 9i is not a version ... it is a marketing label. Do you mean 9.0.? or 9.2.0.1 or 9.2.0.8 no one knows.
Second I have no idea what a you intend to convey with the statement "console standalone pc."
Third "unable" means what? That the pc crashed and burned and is a smoldering cinder or you received some error message you thought too unimportant to post? Again ... you've given us no useful information.
Finally what do you mean by OMS? Is this OMS as in the Java application running as part of the Grid Control or something else?
Finally what are you trying to import? How? A clear explanation is required.
If someone reading what you post can not understand or duplicate what you did because of lack of information you will not receive any help. -
Hi everyone,
I am trying to create a import format to read a .csv file. I have specified the load location and import group. In my Import format, I have fields Account, ICP, entitity and Amount and use the delimiter format to parse the fields. As the source file contains BegBalance and the 12 time periods, I need to do some VB scripting to bring in the correct amount depending on POV Period.
However, when i try specifying a script in the Expression column of the Import Format and run the import, get a error: Import Failed. On the other hand, when i specify a field number in the Import Format and run an import, it works fine.
Any ideas why this happens?
Would appreciate a reply.
thanks!Hi everyone,
I am trying to create a import format to read a .csv file. I have specified the load location and import group. In my Import format, I have fields Account, ICP, entitity and Amount and use the delimiter format to parse the fields. As the source file contains BegBalance and the 12 time periods, I need to do some VB scripting to bring in the correct amount depending on POV Period.
However, when i try specifying a script in the Expression column of the Import Format and run the import, get a error: Import Failed. On the other hand, when i specify a field number in the Import Format and run an import, it works fine.
Any ideas why this happens?
Would appreciate a reply.
thanks! -
When Import get Error-00904 Invalid Column Name
Hi all,
I'm using DI Premium 3.0 with Oracle 10.2.0.1.0 repository. I'm trying to connect Oracle 8.1.4.7.1 (8i) but when i going to import tables get Error-00904 Invalid Column Name. If i connect to Oracle 10.2.0.4.0 don't get error.
Trying from DI XI R2 (11.7) with Oracle 10.2.0.2.0 repository, to connect Oracle 8.1.4.7.1 (8i) don´t get error!
Is error from Oracle repository version?
Thanks in advance.
JorgeHi Manoj,
This is the output:
SQL> desc all_tab_columns
Name Null? Type
OWNER NOT NULL VARCHAR2(30)
TABLE_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(30)
DATA_TYPE VARCHAR2(106)
DATA_TYPE_MOD VARCHAR2(3)
DATA_TYPE_OWNER VARCHAR2(30)
DATA_LENGTH NOT NULL NUMBER
DATA_PRECISION NUMBER
DATA_SCALE NUMBER
NULLABLE VARCHAR2(1)
COLUMN_ID NOT NULL NUMBER
DEFAULT_LENGTH NUMBER
DATA_DEFAULT LONG
NUM_DISTINCT NUMBER
LOW_VALUE RAW(32)
HIGH_VALUE RAW(32)
DENSITY NUMBER
NUM_NULLS NUMBER
NUM_BUCKETS NUMBER
LAST_ANALYZED DATE
SAMPLE_SIZE NUMBER
CHARACTER_SET_NAME VARCHAR2(44)
CHAR_COL_DECL_LENGTH NUMBER
GLOBAL_STATS VARCHAR2(3)
USER_STATS VARCHAR2(3)
AVG_COL_LEN NUMBER
Thanks for your help.
Jorge -
Error 50 and Error 69 when trying to import Backup CD's
I have a new laptop that I am trying to load all my itunes library onto using the backup CD's I have made over the past year. However when I load my back CD's into my computer I get either Error -50 or Error -69. I have no idea what this is and have not been able to find a discussion on this topic. Thanks so much in advance for any help.
When you insert a CD, and click on it in the iTunes source list, the bottom of the iTunes window will show the number of songs, the total time, and the total amount of data present on the CD. For most commerical CDs, this could easily be 400 or 500 MB. After you import the CD with whatever are your desired import settings, and you select that album in your iTunes library, the bottom of the iTunes window will display the total amount of space required for that album in the format that you have converted it to. If you have set iTunes to import as MP3 or AAC files, then an entire album should usually take less than 100 MB of space. If you have selected Apple Lossless in your import settings, an album will probably take between 200 and 400 MB of space. If you have selected WAV or AIFF in your import settings, then the album will take exactly the same amount of space as it took on the CD--typically 400 or 500 MB.
First, confirm that it is in fact the albums in the iTunes library that you say are taking up 400 or 500 MB, and not the actual CDs. If it does turn out to be the songs in your library, right-click on one and select "Get Info." Check the info box that pops up and make sure that the songs are being imported your preferred format. If they are not, then change the importing settings by going to the "Advanced" tab in the iTunes preferences and clicking "Importing." -
Hi all: (first post here
I do get really worrying error messages in my syslog after installing Leopard:
01.01.08 19:44:00 mds[35] (Error) Import: importer:0x87b200 Importer start failed for -2 (kr:268435459 (ipc/send) invalid destination port)
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker[6295]) getpwuid("4294967294") failed
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker[6295]) Exited with exit code: 1
01.01.08 19:44:00 com.apple.launchd[1] (0x10d4e0.mdworker) Failed to check-in!
This keeps repeating every 5 seconds - and I really have no clue what that huge UID for mdworker means - or how to change and what to change to make this go away...
Any help or insights really appreciated! TIA!
Best,
Frank DG1SBGIf that didn't work, type this command in the Terminal.app (/Applications/Utilities/), hit the return key, enter your admin password, and hit the return key:
*sudo mdutil -aE*
That will erase each local metadata store for all mounted volumes and rebuild them.
If that doesn't fix things and you want to report this to Apple, send a bug report (or enhancement request) via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug ID number; thus, starting a dialog directly with engineering. -
During Table Import got error ORA-12805: parallel query server died unexpectedly
Hi,
I tried to import a single table of size 51 GB which normally imported in 5 hours but last time I got following error after 1.5 hours
ORA-31693: Table data object "SCHEMA"."TABLE_NAME" failed to load/unload and is being skipped due to error:
ORA-12805: parallel query server died unexpectedly.
From the "Alert log" file I found the error is
ORA-00603: ORACLE server session terminated by fatal error
ORA-24557: error 1114 encountered while handling error 1114; exiting server process
ORA-01114: IO error writing block to file 622 (block # 373725)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 253952
I checked all the table spaces have more then 100GB free space. No idea why this happened.
Some mount points of the machine is 100% in used where the table spaces created but in table spaces auto extend is off on every data file and each data file have free space.
Anyone have idea how to resolve this issue.Hi,
Which filesystem is file 622 in - it's quite a lrge numbered file - is it a tempfile or do you really have that many datafiles?
Regards,
Harry
http://dbaharrison.blogspot.com -
Alert class import causes errors
Hello,
I am the local new guy. I have followed many examples of how to create an alert popup window and have failed.
Background:
added alert component to stage and delete, component shows up in library
added import mx.controls.Alert
to actions layer first frame of fla file
When I control enter to create the file, I get these wierd errors, 16 of them in fact
rainging form there is no method to no poperty
here they are:
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\managers\PopUpManager.as: Line 123: There is no method with the name 'deactivate'.
SystemManager.deactivate(o);
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\TextArea.as: Line 361: There is no property with the name '_color'.
_color = UIObject.textColorList;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\TextArea.as: Line 363: There is no property with the name 'focusTextField'.
focusTextField = label;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\containers\Window.as: Line 348: There is no property with the name 'clickHandler'.
button_mc.clickHandler = delegateClick;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 159: There is no method with the name 'createClassChildAtDepth'.
var o:Button = Button(createClassChildAtDepth(Button, DepthManager.kTop,
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 166: There is no property with the name 'clickHandler'.
o.clickHandler = onClick;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 167: There is no property with the name 'detail'.
o.detail = detail;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 212: There is no property with the name 'width'.
extent.width += icon_mc.width + 8;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 218: There is no property with the name 'height'.
var i:Number = icon_mc.height - (numlines * (extent.height + 4));
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 263: There is no property with the name 'height'.
icon_mc.move(x, (height - buttons[0].height - icon_mc.height) / 2);
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\alertClasses\AlertForm.as: Line 264: There is no property with the name 'width'.
x += icon_mc.width + 8;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\scrollClasses\ScrollBar.as: Line 272: There is no property with the name 'height'.
var y:Number = ((pos-minPos) * (scrollTrack_mc.height-scrollThumb_mc._height) / (maxPos - minPos)) + scrollTrack_mc.top;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\scrollClasses\ScrollBar.as: Line 494: There is no property with the name 'height'.
thumbHeight = pageSize / (maxPos-minPos+pageSize) * o.height;
**Error** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\scrollClasses\ScrollBar.as: Line 497: There is no property with the name 'height'.
if (o.height < st.minHeight)
**Warning** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\Alert.as: Line 27: There is no class or package with the name 'mx.containers' found in package 'mx'.
static var symbolOwner:Object = Window;
**Warning** C:\Users\jim\AppData\Local\Macromedia\Flash 8\en\Configuration\Classes\mx\controls\Alert.as: Line 213: There is no class or package with the name 'mx.controls.alertClasses' found in package 'mx.controls'.
var tmp = AlertForm;
Total ActionScript Errors: 16 Reported Errors: 16
funny thing is that when i create the same code
import etc alert.show etc in a new fla file it works just fine, when i use the working code from the new fla and place it here not changing anything it fails with the previoulsy mentioned errors,
I have checked the class path, i have added the direct folder of the classes, I have even tried to import the .AS file it self with no luck.
Any suggestions here?
Thanks
JimAhhhhh...thank you!
One other question that is related...
So now it imports the class ApplicationMain.as.
But now there are path issues that I can't quite figure out.
So I have a scene called Content - my main and only scene.
In that scene there is a MC called content_MC as well as 2 buttons; a print button and a start over button.
Inside the content_MC there are several objects, including those that are labeled with instances that are meant to point the ApplicationMain file to them so they can have the ApplicationMain.as class applied to them.
I have an AS layer/frame inside content_MC that imports the ApplicationMain class just as you suggested.
Inside the ApplicationMain.as file the targets are registered as e1, e2, e3, e4, etc.
These instances, e1, e2, etc, are located inside content_MC on a layer below the AS layer where the import of the ApplicationMain code is located.
When I export the SWF I get error 1120 access to undefined property e1. This error occurs for each instance I am trying to target.
This is clearly a path issue but don't understand...?
Shouldn't those instances be found by the ApplicationMain.as class since they are resident in the same movie clip where the ApplicationMain.as class is being imported into?
Here's how the targets are registered in the ApplicationMain.as file...
_transformTool.targets = [e1, e2, e3, e4, f1, f2, f3, f4, f5, f6, f7, f8];
Man, AS3 is making my head spin!
Thanks a ton for your help! -
hi,
I am using oracle express edition 10g in os linux ,
i hv create export dump file easy_defination.dmp in my own schma ,all granted to my user but when take a import some error is occured.
IMP-00003
ORA-00959 :tablespace CDLS_ADMIN does not exit
IMP-00017
how can sole this problemIf the objects are explicitly created in a particular tablespace imported where such a tablespace is not present, then you will get this error.
create table dept(deptno number,dname varchar2(10),loc varchar2(10)) tablespace USERS;
While importing dept in another database for example and if tablespace USERS does not exist then you will get this complain.
If objects are not created explicitly then uncle oracle will put all these objects in the destination user's default tablespace. Make an experiment on this to crystallize it.
If you still face the problem, post here the complete log and let us see what we can do for you. -
PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log
Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2011-02-23 19:56:12.607
CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE 2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR 2011-02-23 19:56:12.607
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PMHello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul -
Import ABAP error in ECC6 system copy targert
Hi Experts,
I am istalling SAP Ecc 6 in System copy targrt, ABAP import fail in 2/87. I got the error Loading of 'SAPDFACT' import package: ERRORImport Monitor jobs.
My OS Windows 2003 64 bit and Oracle 10.2. Please find the log files belo. Please help me to solve this issue
:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -ctf I H:\MVGK IDESBackup-march2010\ABAP\DATA\SAPDFACT.STR C:\Program Files\sapinst_instdir\ERP\LM\COPY\ORA\SYSTEM\CENTRAL\AS\DDLORA.TPL SAPDFACT.TSK ORA -l SAPDFACT.log
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) INFO: /BI0/E0RSTT_C01 created #20100325173245
(IMP) INFO: import of /BI0/E0RSTT_C01 completed (0 rows) #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~0 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~01 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~02 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~04 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~05 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~06 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~07 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~08 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~09 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~10 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~11 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~12 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~13 created #20100325173245
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173245
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) ERROR: DDL statement failed
(DROP INDEX "/BI0/E0RSTT_C01~P")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325180802
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325180808
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325182246
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325182251
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325183259
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325183304
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100326100904
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100326100910
Thanks in Advance
Jose HHi,
You can check the defined enviornment variable using command prompt and System properties.
Open Command Prompt and give "set" command. It will show you active environment variable.
You can also set missing environment variables in system properties.
Start -->Control Panel --> System
On Advanced Tab --> Environment Variables.
After logging to the database if it shows message "Connected to idle instance", that means your database is not started.
Please start the database using below SQL command.
Open Command Prompt
C:\Sqlplus / as sysdba
SQL>startup
Once it says "Database opened", retry SAP installation.
You can also check the database status in SQL prompt using below command:
SQL> select instance_name,status from v$instance;
It must show output like:
INSTANCE_NAME STATUS
<SID> OPEN
Regards.
Rajesh Narkhede
Maybe you are looking for
-
Region map creation causes system crash
Hello, I am new to power map (in 32 bit excel/offfice 2013 professional plus). I have tried to create a region map and get this blue screen error "pc ran into a problem -something something something - it went to fast, but i did see "system_service_e
-
Iweb problem - auto creation of subfolders when uploading website
when i originally uploaded my website the uploads went straight to the url <stgeorges.co.uk>. (done via ftp, don't use mobile me) now when i am updating the site, iweb seems to be automatically creating a subfolder to put updates in <stgeorges.co.uk/
-
"clq: (C192716) I/O error." message when trying to add a quorum device
A little bit of history: Recently our storage folks migrated us from CLARiiON LUNs to VNX LUNs on all the shared disks. At the time, the cluster booted fine. However, since all the DID device IDs changed, we no longer have a valid quorum device: <pre
-
DeskJet 6940 mysteriously starts a new sheet
I have a - DJ6940 My OS is XP pro My word processor is MS word 2002 SP3 Occasionally, the first few lines of a page will print on one sheet of paper and then the printer prints the rest of the page on a new sheet. It actually ends the first page in
-
Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day