Error in ABAP WebDynpro
Hello friends,
We are trying for the first time to run a WDA application in our new ECC6 EHP4 system. We have activated the ICM and the needed ICF's but it still does not work. When we test an apllication we get a blank page with the following javascript error: "Javascript error: wdaOnMainLoad is undefined".
Please help me.
Thanks in advanced,
Udi.
Hi,
Just a wild thought !!
Have you tried to relax your browser settings to medium or Low to test that ActiveX en Java scripts can run.
I was also browsing the above said forum discussion.
"I did activate the WebDynpro nodes for my applications. But I just discovered, that I forgot to activate the WebDynpro MIME handling nodes within the path default_host -> SAP -> public -> bc -> webdynpro. After this, the applications compile and finally work. Thanks to all of you anyway. "
i trust you didnt get confused with the location.
default_host -> SAP -> public -> bc -> webdynpro is different than
default_host -> SAP -> bc-> webdynpro
I just tried to deactivate the whole node default_host -> SAP -> public -> bc -> webdynpro expecting to get the above said error. But it is not giving any error. So i can understand that you did everything and still it is not working. I guess you still have to look one by one the SAP Notes or else raise SSO ticket with SAP>
Regards
Senthivel
Edited by: Baskaran Senthivel on Jul 12, 2010 5:01 PM
Similar Messages
-
Page cannot be displayed(error in ABAP Webdynpro iview)
Hi All ,
I am trying to create ABAP Webdynpro iview. When i try to preview it...i am getting "Page cannot be displayed". I checked the Web AS connection and it is working fine. Please put on some light on this.
Regards
RahulHi Sharma,
Better U check the Iview parameters(Application name,and Namespace).
Also check it out in deployed content.
Regards
Nandha. -
OBJEC_OBJEC REF NOT FOUND,UNCAUGHT EXCEPTION ERRORS IN ABAP WEBDYNPRO
Hi Folks,
We ve been facing with a weird issue that while we were trying to access the (node in Objective setting and appraisals) configure performance management process ,getting an dump as
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_FPM_EXCEPTION
Date and Time 01.10.2009 14:08:12
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_FPM_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_FPM_MESSAGE_MANAGER========CP' has to be
terminated.
Information on where terminated
Termination occurred in the ABAP program "CL_FPM_MESSAGE_MANAGER========CP" -
in "IF_FPM_MESSAGE_MANAGER~RAISE_T100_EXCEPTION".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 20
of the (Include) program "CL_FPM_MESSAGE_MANAGER========CM00H".
The termination is caused because exception "CX_FPM_EXCEPTION" occurred in
procedure "IF_FPM_MESSAGE_MANAGER~RAISE_T100_EXCEPTION" "(METHOD)", but it was
neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_FPM_MESSAGE_MANAGER========CP "; its source
code begins in line
| 1 of the (Include program "CL_FPM_MESSAGE_MANAGER========CM00H ".
HERE ANOTHER ERROR DUMP WE GET
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 29.09.2009 21:33:39
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "/1BCWDY/ENNJ6GYA7WNKNW5ZMH3D==CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Information on where terminated
Termination occurred in the ABAP program "/1BCWDY/ENNJ6GYA7WNKNW5ZMH3D==CP" -
in "PREPARE_NAVIGATION".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 1859
of the (Include) program "/1BCWDY/B_ENNJ8K41U5ETCV51ASVN".
Termination occurred in a Web Dynpro application
Web Dynpro Component FPM_OIF_COMPONENT
Web Dynpro Controller CNR_VIEW
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "PREPARE_NAVIGATION" "(METHOD)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "/1BCWDY/ENNJ6GYA7WNKNW5ZMH3D==CP "; its source
code begins in line
| 1685 of the (Include program "/1BCWDY/B_ENNJ8K41U5ETCV51ASVN ".
Techies please through some light on the above eerors
RegardsHello,
Before using the Predefined Performance Management Process you have to generate a template using the IMG activity "Configure Template for Performance Management Process" under
Personnel Management->Personnel Development->Objective Setting and Appraisals->Settings for Predefined Performance Management Process
After that a process must be configured using the IMG activity "Edit Performance Management Process"
Beefore generating a template and process, we highly recommend that you import all notes listed as related notes to sap note 1239426 since they all fix issues in the Predefined performance management.
Check also the notes below, they helped fix similar dump for other customers.
1284562 Columns missing when you generate a template
1239426 Business function HCM_OSA_CI_1 (and related notes)
1239427 Business function CA_HAP_CI_1
1295544 Error when generating categories
Hope this help
Sarah -
To display error message abap webdynpro
Hi,
I need to display an error message when the field is not selected from the drop down list..when the default value - please select-- is there.. n not other value is selected...
I did some coding where in I am getting the message for the first time... when I press a button but when I press the button for the second time after selecting some value from the drop down box.. but when I am changing it again to -
please select----, its not giving me the error message....
any demo code will be very useful.
Thanks and Regards
TenzinHi Tenzin,
Regarding your problem, you can do like this.
When you checking the dropdown value on an action that time you will read the selected value index and then check if index is equal to first 1 i.e. if user has selected the first record then you can raise an error message.
For this try this logic given below :
DATA lo_nd_dropdown1 TYPE REF TO if_wd_context_node.
DATA lo_el_dropdown1 TYPE REF TO if_wd_context_element.
DATA ls_dropdown1 TYPE wd_this->element_dropdown1.
navigate from <CONTEXT> to <DROPDOWN1> via lead selection
lo_nd_dropdown1 = wd_context->get_child_node( name = wd_this->wdctx_dropdown1 ).
@TODO handle not set lead selection
IF lo_nd_dropdown1 IS INITIAL.
ENDIF.
get element via lead selection
lo_el_dropdown1 = lo_nd_dropdown1->get_element( ).
@TODO handle not set lead selection
IF lo_el_dropdown1 IS INITIAL.
ENDIF.
data : lv_index TYPE i.
lv_index = lo_el_dropdown1->get_index( ).
IF lv_index = 1.
report message
lo_message_manager->report_attribute_error_message(
message_text = 'Please select Airline Code'
element = lo_el_dropdown1
attribute_name = 'CARRID' ).
ENDIF.
Hopes this will helps you.
Regard
Manoj Kumar -
IE Script error when double clicking on a view in Abap Webdynpro component
Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
BhupendraHi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy -
Error while trying to call a ABAP webdynpro appl. as a link on html form
Hi,
When I am trying to call a ABAP Webdynpro aplication as a link on html form. I get the following error
Error when processing your request
What has happened?
The URL http:///sap/bc/webdynpro/form_ap/ (Path of ABAP webdynpro application) was not called due to an error.
Note
The following error text was processed in the system DRD : Error in Web Dynpro Runtime System
The error occurred on the application server DRD_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_REQUEST_INPLUG_PARAMETERS of program CL_WDR_CLIENT_APPLICATION=====CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DRD_06 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server DRD_06 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 102 -u: -l: E -s: DRD -i: DRD06 -w: 0 -d: 20081002 -t: 032939 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Any help will be greatly appreciated.
Thanks
RMRM,
url clearly shows that it is unable to get host and port.check how you are building that url in html page
Thanks
Bala Duvvuri -
ABAP Webdynpro Development - Script Error when Accessing Visual Elements
I am encountering a strange error at my client . I can't use the Abap Webdynpro visual elements to build views .
To reproduce the error :
- T-code SE80
- Open up any ABAP webdynpro component .
- Open up one of the view and go on Tab Layout .
Normal Screen : You would see many WYSIWYG items ( buttons, radiobutton , text elements etcu2026. ) at the left side u2026 these elements are used to build the view .
Here : No elements displayed and when we click on that area we get an error .
Instead of the elements to get displayed .. lines are displayed and when you try to open up ( click ) the lines , an internet explorer script error stating the following occurs ( although the abap wendynpro is edited in SAP Gui ) :
An Error has occured in the script on this page .
Line : 1
Char : 25
Error : Object Required
Code: 0
URL : http://hdrerpdev05.bchydro.bc.ca:8100/sap/bc/wdvd/toolbar.html?_vdrespkey=4KE8FGJO3P88DO8K5XCEYHTEA&_vdframe=toolbar&usedynp=&usepat=&sap-client=100
Anybody had had the same kind of error before ^^????
Thanks and Best Regards !Hi,
we are getting the some what related errors in SE80 -> Web Dynpro Layout
An Error has occured in the script on this page .
Line : 1
Char : 1
Error : Object Expected
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd/painting.html?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=painting&sap-client=230
An Error has occured in the script on this page .
Line : 110
Char : 2
Error : Could not complete the operation due to error 80020101
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=no_add_ui_lib&sap-client=230
Recently, we have upgraded our ERP system (SAP ECC 6.0 SPS17) with EHP4 SPS8. SAP_BASIS and SAP_ABA patch level same on 701_0008.
FQDN is mantianed at icm/host_name_full parameter in system as well as in /etc/hosts file with associated system IP address.
As suggested by Ted Dinh, we do not find any duplicate MIME files in our MIME Repository (SE80) and we cleared/invalidated ICM cache many times in problem analysis.
As suggested by Thierno Diarra , in our affected system domain WDY_MD_UI_ELEMENT_CATEGORY is well maintained in value ranges.
We have raised SAP OSS Message for the same, they told us to check dns server connectivity/settings with the affected system. we did the suggested DNS settings in affected system. But still the same error message is occuring. They have suggested same sap notes like #979039 and #1009930 & #1483210 , but all the corrections/suggections/SICF service status as mentioned, are found OK in our system.
Regards,
Bhavik G. Shroff -
Error occured while showing adobe form in abap webdynpro application
Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CPHi Arjun ,
Thanx for ur reply ,
i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
if m_version is initial.
88
m_version = m_pdf_object->get_version_info( ).
89
endif.
90
if version < ''.
91
set_usage_rights( m_pdf_object ).
92
endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
execute, call ADS
104
m_pdf_object->execute( ).
105
106
get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
| imported into interactive forms.(201501). -
Error Handling in tables using ABap Webdynpro
Hi All,
I am new to this ABAP webdynpro programming. I have a small question. I am using a table control in one of my iview. I need to check some validations on some columns of this table. Let's say I have a table with 3 columns A,B and C.
Case 1 : Whenever any user enters values in C which is greater than A i want to raise an error message saying "The Value is greater than A". The user shouldn't be allowed to enter anyother inputs before correcting the same.
OR
Case 2: If the user enters 10 rows in the table and the 5th row contains the error. How can i highlight that row or field which contains the error.
Your inputs will be valuable to me.
Regards,
Pravesh.Hi,
Get the elements of the node for which you table is bound.
Loop through the context element set.
get the record for that context attribute and check the column A and column B value and throw
the error using the report_error_element_message when there is error.
Check this sample code -
DATA:
lt_attr_list type STRING_TABLE,
ls_attr_list type string.
ls_attr_list = column name.
append ls_attr_list to lt_attr_list.
clear ls_attr_list.
ls_attr_list = column name.
append ls_attr_list to lt_attr_list.
clear ls_attr_list.
DATA: lit_elementset type WDR_CONTEXT_ELEMENT_SET,
lis_element type ref to IF_WD_CONTEXT_ELEMENT,
ls_data type <<strucure type>>.
CALL METHOD <<nodename>>->GET_ELEMENTS
RECEIVING
SET = lit_elementset.
LOOP AT lit_elementsetINTO lis_element.
lis_element->get_static_atributes->
importing = ls_data.
if ls_data-columnC GT ls-data-columnA.
lr_msg_manager->report_element_error_message->
message_text = 'Column C canot be gretaer than column A'
element = lis_element
attributes = lt_attr_list <<Populate the attributes table for which errors are to be shown>>
endif.
clear: ls_data, lis_element.
ENDLOOP.
Regards,
Lekha. -
ABAP Webdynpro errors on transport
Hello,
Can some one tell me why an ABAP Webdynpro goes into error when transported from one system to another.
Thanks,
VishwanathPlease do not be so vague when asking a question.
Rob -
Zci type ADOBE Interactive Form in ABAP Webdynpro short dump
Adobe Reader version 8.1.2
Life Cycle Designer version 7.1.4270.1.421766
ECC 6.0 patch 13
When I ran the 'FP_PDF_TEST_00' , it shows
Version Information: 710.20061024154505.342190
In my ABAP Webdynpro app., it has 3 inputfields.
In the Form layout, I changed the form layout type to 'ZCI' for interactive form, and Insert the WebDynpro Script.
And in the ABAP Webdynpro view layput designer, I enabled the pdf form element.
All objects compiled without any problem.
During the runtime, it got the following short dump:
21 METHOD CX_WD_GENERAL=================CP CX_WD_GENERAL=================CM003 5
CX_WD_GENERAL=>RAISE
20 METHOD CL_WD_ADOBE_SERVICES==========CP CL_WD_ADOBE_SERVICES==========CM008 193
CL_WD_ADOBE_SERVICES=>CREATE_PDF
19 METHOD /1WDA/LADOBE==================CP /1WDA/LADOBE==================CCIMP 1955
CL_INTERACTIVE_FORM_ZCI=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
Our BASIS sent me the ADS trace:
SAP Interactive Forms by Adobe
Render Error Report
'pdf' Log Entries
restoreState is not a valid attribute of subform, Attribute not loaded. Line 5.
Invalid node type: dataGroup
The fault occurred on line 0.
The SOM expression '$record.BAPIBNAME' for the dataRef specified on field 'BAPIBNAME', resolved to an incompatible node type of 'dataGroup'.
Any comment or advise?Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards -
Deleting row from table in ABAP webdynpro
Hi all,
Can anyone help me regarding deletion of a row from a table in ABAP webdynpro.
I have written a code like this :
DATA:
NODE_STUDINFOSYS TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_STUDINFOSYS TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_STUDINFOSYS TYPE IF_COMPONENTCONTROLLER=>ELEMENT_STUDINFOSYS .
navigate from <CONTEXT> to <STUDINFOSYS> via lead selection
NODE_STUDINFOSYS = WD_CONTEXT->GET_CHILD_NODE( NAME = IF_COMPONENTCONTROLLER=>WDCTX_STUDINFOSYS ).
get element via lead selection
ELEM_STUDINFOSYS = NODE_STUDINFOSYS->GET_ELEMENT( ).
deleting data selected via lead selection
NODE_STUDINFOSYS->REMOVE_ELEMENT( ELEMENT = ELEM_STUDINFOSYS ).
*But I am getting an error:*
Error when processing your request
What has happened?
The URL http://hsdnt24s11.hclt.corp.hcl.in:8000/sap/bc/webdynpro/sap/znet310_add_del_sech/ was not called due to an error.
Note
The following error text was processed in the system HE6 : The lead selection has not been set. VIEW_ADD_DEL_01
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
Method: PATH_TABLE_GET_ELEMENT2 of program CL_WDR_CONTEXT_NODE===========CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HE6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server hsdnt24s11_HE6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server hsdnt24s11_HE6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SUMANK -l: E -s: HE6 -i: hsdnt24s11_HE6_00 -w: 0 -d: 20081220 -t: 155832 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Can anyone help me???Hi Suman,
this issue seems to be not specific to the FPM. I would like to suggest you to address this problem in the ABAP forum.
Best regards,
Thomas -
ABAP webdynpro with interactive form - launching failure
We are doing some prototype in the solution manager box using ABAP webdynpro and Adobe Interactive Form. I created a webdynpro with a very simple Adobe form embedded in an view.
But when I test the webdynpro, I got the following error page in internet browser, any idea?
Error when processing your request
What has happened?
The URL http://md1as086.medimmune.com:8001/sap/bc/webdynpro/sap/z_wd_bookflight_gebo/ was not called due to an error.
Note
The following error text was processed in the system SMT : WebDynpro Exception: ADS: Request start time: Tue Mar 06 11:53:06 EST 2007(200.101). ?ꯂ.RuntimeProcessor.process(RuntimeProc
The error occurred on the application server MD1AS086_SMT_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMT in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MD1AS086_SMT_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server MD1AS086_SMT_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: CHEUNGJ -l: E -s: SMT -i: MD1AS086_SMT_01 -w: 0 -d: 20070306 -t: 115305 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework TeamHi,
Is you ADS Configured ?
Check that out.
Regards
<i><b>Raja Sekhar</b></i> -
Smartform & ABAP Webdynpro & Internal table
Hi Expert,
I am able to open the smartfrom by using ABAP Webdynpro.
But when I try to add the table under "Global Settings -> From Interface -> Table"
Paramemter Name Type Assignment Associated Type
I_ZSG_PAY_DATA Like ZSG_PAY_DATA
It works fine when I test it in t-code SMARTFORMS. But when I use the same ABAP Webdynpro program to open this smartform, the error appear.
"Calling Parameter incorrect"
Could you please let me know how to fix it?
Thanks a lot,
WFHi William,
If you have a working smartform then you should be able to display it in WD by passign its XSTRING to the PDFSOURCE of it.
Just check that where you have written the code to get the XSTRING of smartform in WD. You might have modified the smartform interface and forgot to call the revised FM generated after the smartform was changed in WD.
Just re-write the entire code to generate XSTRING for smartform and see if it works or not.
You can also try to put a break point in the code and see where exactly it is failing i.e. whether it is to do with calling smartform or converting it or WD related.
Thanks,
Abhishek -
Abap webdynpro layout and application not displayed
Hi Gurus ,
We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
Following are the list of error in EHP4 system ,
1) Layout of ABAP Webdynpro Component are not displayed .
2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
error are as follows while trying to view layout in abap webdynpro application :
http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AMHi,
Thanks for reply ,
Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM
Maybe you are looking for
-
I have a BB Curve that chirps when I am in the middle of a call. It doesn't matter if I am using my handset, if it is on speakerphone, or if I am using my bluetooth. Verizon sent me a replacement phone and it is still doing it. Is anyone else havin
-
Computer shutting down when using iTunes
Everytime I try to download/update something via iTunes, my computer completely shuts off. It has never done this before and only happens when using iTunes. Any thoughts or suggestions?
-
Interlace lines when export Alpha Ch.
Hey all video fanatics out there, here is one for you! I'm chroma keying a subject behind a green screen...worked great! My problem is when I export to Quicktime + Alpha channel (using Quicktime Animation setting) the QT file has an annoying interlac
-
Question about methods in a class that implements Runnable
I have a class that contains methods that are called by other classes. I wanted it to run in its own thread (to free up the SWT GUI thread because it appeared to be blocking the GUI thread). So, I had it implement Runnable, made a run method that jus
-
How can I download Photoshop Elements 13?
mac is not be able to discover the CD of photoshop elements 13.