Error in activating 3.5X Routine in BI 7.0 Version

h
Edited by: akg_bi on Feb 23, 2011 2:09 PM

Hi.....did you have "Accuratech" as value for 0CUSTOMER????? is not very standard way for coding customers nromally is used a range number....about your problem is because the 0CUSTOMER infoobject (as most of them) not support lower case letters...you must use the stanrda way for naming customers or ....upper case the value..or modify the infoobject in order to support lower case letters
Regards

Similar Messages

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error while activating Transformation CO_OM_WBS_3

Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
Sunder

Dear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM

Error while activating transformation in BI 7.0

HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
Sheela

Hi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
    data: l_d_length like sy-index,
             l_d_char type c,
             l_d_index type sy-index,
          l oopx like sy-tabix.
    data : xinfobj(30) type c value 'RABC'.    -> this is ur infoobject name
    clear : result.
    call function 'CONVERSION_EXIT_ALPHA_INPUT'
      exporting
        input = tran_strucutre-XYZ     -> object name in ur structure
      importing
        output = result.
    l_d_length = strlen( result ).
    do l_d_length times.
      l_d_index = sy-index - 1.
      l_d_char = result+l_d_index(1).
      call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
        exporting
          i_chavl                 = l_d_char
          i_iobjnm                = xinfobj
    I_S_COB_PRO             =
    I_T_COB_PRO_CMP         =
       exceptions
         chavl_not_allowed       = 1
         others                  = 2
      if sy-subrc <> 0.
        result+l_d_index(1) = ' '.
      endif.
    enddo.
Regards;
Jitendra

Syntax Error while activating 2LIS_04_P_ARBPL Transformation

Dear all,
While activating 2LIS_04_P_ARBPL Transformation activation , I am facing following error while checking in Routine
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
please help me out for this
Edited by: tjoshi1982 on May 19, 2011 7:11 PM

Following are error that comes after checking routine
0TGTPROCCAP     -
    E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
0TGTSETPCAP      -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"statement.
0TGTTEARCAP    -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
please tell me what to do next,as i already tried to assign source field

Hexadecimal Error while activating DSO

Hello Experts,
I'm getting following error while activating DSO. I tried ALL_CAPITAL, ALL_CAPITAL_HEXADECIMAL in RSKC. still i'm facing this problem anyone can suggest anything. Iam using BW3.x flow
Value "CC-5012 TRYPSIN/EDTA SOLUTION 100ML" (HEX 430043002D0035003000310032000A00540052005900500053) of characteristic 0CRM_ITDESC contains an error at position 8
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 8 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem.
Thanks
Ajay.D

Hi Ajay,
There are invalid characters at the specified position. Now you ahve 2 options:
1. Either edit the PSA manually and replace this invalid character
2. Use the Funvtion Module 'RSKC_CHAVL_CHECK' . Pass the data to it & get the invalid char replace it with space. This can be called in the filed level routine if the effected info object is identified .
Check out these threads:
Re: Problem with Characters that have a hexadecimal display between HEX00
Re: Invalid Characters issue
Regards
Raj

Error when activating 0MAT_Plant.

Hi Experts,
I have added a custom created infoobject(Material Freight Group) as an attribute of 0MAT_PLANT.When i assign it as only display attribute,its activating.But when i change it to Naviagtional attribute,its giving me the error"Error activating the infoobject".I tried assigning the custom created object as with and without Master data/text.Also deletd the master data from the infoobject before i change it to navigational.
Characteristic 0MAT_PLANT: Error when generating master data routines
Would be great if somebody can chip in with their knowledge on how to overocme this.
Thanks in advance

Thanks Dinesh. Not sure if it is our 30B version but I don't get very useful information when checking the long text. I also checked the complete log but it is only mentioning to analyze /BI0/QMAT_UNIT with SE11. When doing this I get an error: /BI0/QMAT_PLANT: Inconsistency DD <-> DB (check table with analysis tool)
Any other tips?

Error in activating of Transformation

Dear All,
I am trying to activate the Transformation for the Data Store Object.
Its throwing an error during activation.
I am getting three errors as below:-
1)"Error when assigning SID: Action VAL_SID_CONVERT table ZRECE_NO".
2)No SID found for value 'null' of characteristic 0CURRENCY
Diagnosis
Characteristic value null does not exist in the master data table of characteristic 0CURRENCY. Therefore, this value could not be transformed into the internal SID.
Procedure
Check whether the value is correct or not. If it is correct, you need to generate the associated master data. Note: For characteristics 0FISCPER and 0FISCYEAR, there must be a corresponding fiscal year variant (see table T009). In addition, there must be units in table T006 and currencies in the table TCURC.
3)Value '#' (hex. '2300') of characteristic ZRECE_NO contains invalid characters.
for the 3rd errror i went to Tcode RSKC and have given all the permitted special characters.
please give me suggestion.

Hi Anup,
#' is probabaly a character in the source system that the BI system is not able to display. It may be a special
language character. If you display the data in RSA3 in the source system you should be able to see what the
real character value is. It may be a special language character. If it is a language character and its in uppercase
then in transaction RSKC you should maintain only the string ALL_CAPITAL in the BI system.
If you have a UNICODE source system and the BI system is UNICODE then the above is not necessary and you
should just check that the UNICODE option is switched on in SM59 for the relevant RFC connection, you need to
do this for the RFC connection in BI and the RFC connection in the source system.
If #' represents some other character that BI can't display then you may need to correct this data in the
source system or you could write a routine in the transfer rules to convert the character represented by
#' to something that BI can display. Please refer to the note 173241 for allowed characters in the BI
system.
Best Regards,
Des.
Edited by: Des Gallagher on Nov 6, 2008 1:14 PM

Error in Activation of Transformation

Hi,
I was trying to activate my transformation, but there was an error during activation which I couldn't understand. I manage to track down the problem area. Here's my case:
I'm converting a Timestamp Source field to 2 Target fields, Time and Day. So I implemented routine to derive at the values with the following code.
    lv_tstamp = source_fields-/BIC/ZCRM_ICTS.
    CONVERT TIME STAMP lv_tstamp
      TIME ZONE 'UTC   ' INTO DATE lv_day TIME lv_time.
    result = lv_day (or lv_time).
The transformation activates successfully if the routine is implemented on 1 target field, but when I implement the routine for both target fields, it results in error during activation. No error occur when I check on the transformation.
Anyone had an idea why this is happening?
Thanks in advance.

Hi Ioan,
please check OSS notes
918894 ASSERT: InfoCube with navigational attributesas source
909741 Non-cumulative cube: Transformation cannot be saved
905624 Transformation cannot be activated
Cheers
     SAP NetWeaver 2004s Ramp-Up BI Back Office

Error in activating 3.5X Routine in BI 7.0 Version

Similar Messages

Maybe you are looking for