Error in Assignment of Text Elements of Report to Transport
Hi All,
I have transported few reports to Quality system however the texts elements associated with those reports have not transported to Quality system .
Now I am trying to assign these text elements to new Transport however I am getting error while activation and messgae just displays " Error in Activation " .
The Original system of these reports is different from my current development system. The Transport Layer of Package and Transport is same.
Please advice . Thanks.
Hi,
Try to transport the text-elements along with the report to the quality server. Save and activate the text-elements and the report in the same transport request and then transport to quality system.
Regards,
Vik
Similar Messages
-
Error during activation in Text Elements
Hi All,
I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
and in Changing mode it's shows inactive mode For Previous Transport request user.
Please Suggest any Solution For that .
Thanks & Regards,
ManishHi Mahesh,
The Previous User Request already released .There is on Button there (active/inactive).
When i click this button it goes to display mode and shows status as active.
but when i click change mode it shows status as in active.
Thanks & regards,
Manish -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
How to transport the text elements in Reports?
need answer to this question.
how to transport the text elements in the reports?
Edited by: venkata kumar on Feb 18, 2008 1:33 PMHi Venkata,
Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
In short: Move SAP script - to move text elements.
Cheers,
Aditya -
Error during activation of text elements
Hello All,
I have a problem activating the text elements of a program. The
text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
Thanks in advance for all the help.
Rgds,
AnjuHave a look at:
Selection Text Activation
Amit. -
Issue in text element in Bex after transport
Hi All,
I'm facing an issue in text element assigned to Fiscal year .
In Bex design mode ,I introduced text element and I choosed the "Display Current fiscal year(Variable/Key)" in Development system and after releasing the design mode Im seeing the year in numbers, say 2010(user entered year).
Now I transported to Quality system when checking the report Im seeing the year is changed to text format, that is "'Cal. Year, 4 Special Periods 2010" and in design mode > text element property> "Display Current fiscal year(Variable/text)" is checked.
Could anyone help me why this change happening from one system to another system.
Thanks in advance
Rgds
JayasriHi Jayasri,
Restrict your report on fiscal year variant( eg K4).
Thanks,
Kalyan. -
Error message TD427 (A text element is not defined for form J_1IEWT_CERT)
Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You."test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form. -
Deleting/Creating multiple Text elements!
Hi Friends,
I have two questions on TEXT ELEMENTS.
1. My program lines....
wa_output-line1 = 'Financial Accounting'(001).
wa_output-line6 = 'Financial Accounting'.
lv_vartext = 'Financial Accounting'.
If you observe above code you can identify that there is a text FINANCIAL ACCOUNTING , which is repeating three times.
and for the first time TEXT ELEMENT created. and to create for other i have to double click and it will assign same TEXT ELEMENT to my text. I have to do this action by searching them in my code.
Is there any simple step to do this, to reduce this time....? ( Because TEXT ELEMENT with same text already created )
In my program I have more than 50 text elements and each repeating more than 20 times in my report.
Forget about alternates.. advise if there is any navigation to do this..!
2. Say I have 50 text elements in my text elements screen...
and now i want to delete all unnecessary text elements... Unnecessary means which are no where called in my program.
Can i do it with out manual effort...? I mean... want to avoid.. searching each of them in my report and then deleting.. !?
Thanks ,
Naveen Inuganti.Hi Naveen,
1.To replace all the text elements at a time you need to press Find Button(CTRL+F) and give the text (FINANCIAL ACCOUNTING
and replace with TEXT ELEMENT.
2.To delete unused text elements,First find the text elements which are not used by Extended Program Check(EPC) by usng SLIN transaction code ,select character strings checkbox and execute.Then check for warnings in character strings,it will list of unassigned text elements.llist out the text elements and delete from your program.
Thanks & Regards,
Pydi Reddy. -
How can I use Text-Elements in Dynpro Buttons ?
Hello Experts,
I have create a dynpro screen with the screen-painter.
In this screen have a button, in which label i want to use defined textelements.
This has the advantage that i can expand it to other languages.
The screen is an standard screen.
In the Button i have to try using &&Text-001&& , but it doesn't show me the contain of Text-001 .
It show me &&Text-001&& as label in the button.
How can I do ?
Which possibilties are existing ?
Thanx in advnace for your responses
Best RegardsIn button attributes select output field . Then in program define a vairable for the button with the same name and assign the text element to it before screen is displayed.
data: button(10) type c. "your button name
button = text-001.
call screen 100.
Regards
Marcin -
Hi Kiran,
Thanks For u r reply.My pblm is i have one sap script form in tat output i have to get the text element through report program.I written the code like this. .
Data : extn(10) type c.
Extn = text-001.
Actually when we r leaving the report program it is saying tat it will be maintained in DE Language.after tat i created the text element and i saved it and my report program also.but in my output tat text symbol is not displaying.
Thanks,
Swapna.Mhi
good
did you copy your standard program to the z* program , if yes than change the language from DE to EN and than try the same , i hope it ll work.
thanks
mrutyun^ -
hi,
Hi,
In a custom trasaction , I have text element . When I transport that text upper regions , I am not able to see in transaction.
But I can see that text in the Text-symbols( Program->GOTO--> text-symbols)
let me know any suggestions.
thnks.HI,
The text symbols are language depended. It means if you have only English version of the text symbols they will not be displayed for a user
who works for example with DE log-on language. For translating the text symbols you have to use Goto->Translation in SE80 while you have opened the given program (not its include! just the main program...).
When you transport program texts it always transports every languages defined. It is done by transporting of the object REPT. But when the program is just created then the transport will consist of object PROG and this includes the program texts automatically.
I hope this helps...
Cheers,
Chandra Sekhar. -
Text Elements not working in report program
Hi Friends,
I had created a new Text-element in my report program while i execute the program my text element is not displayed. but if i use the exiisting element then it is displaying correctly.
For Ex:
There are Text-Elements like
E01: Error
S01:Success
Now i am adding new text-element
W01: Warning.
In program;
Message text-W01 type 'E'. . In this case it is not displying the TE.
But if i use E01 or S01 then it is displaying.
Can anybody tell me what is the problem?HI
Goto SE38 > GOTO> TRANSLATION
Check in which language it is then CHANGE LANGUAGE FROM GERMEN TO ENGLISH.
NOW YOU BE ABLE TO CHANGE.
GOTO> TEXT ELEMENTS> SELECTION TEXTS -
Text element assigned to select options not showing
Hi guys,
We have a problem in shaowing the text assigned to the select-options...
When we run the program the text element ssigned to the select options is not showing instead the element name is shown.
The original language is german, and it wont show the english word we appended to as text element for select-options.
example:
AUART insteat od blocked order
How can we show the text elemen when we run the program?
Thanks!Hi Mark,
Go to the program text elements and select the Selection Texts tab,
There you fill find the select option for AUART and the corresponding text maintained.
You need to maintain translations for this text entered.
Chose Goto (in menu bar) -> Translation
Then maintain translation in English.
Regards,
Aditya -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla, -
Error when assigning SID while uploading text in the info-object of the DSO
Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM
Maybe you are looking for
-
Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.
-
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility
-
SQLAuthenticator Provider Specific ORA-01722 invalid number error
Hi, when i try to to configure sql authentication and After restrating the OBIEE server i am facing the below error <Oct 21, 2013 12:09:10 PM GST> <Error> <Security> <BEA-000000> <[Security:090759 ]A SQLException occurred while retrieving user infor
-
Getting Error while updating Inventory from CSC
Hi Experts, I am trying to update Inventory Status after placing order from CSC. I am able to update Inventory Status from Application, but i'm unable to do that from CSC. While updating inventory i'm getting below erros. CONTAINER:atg.commerce.Comme
-
CRM 5.0 Custom BSP takes whole viewarea
Hello all, I created an entry in my navigation bar where I launch a custom BSP. When I click the entry the BSP opens up fine but the navigation bar, error bar and history navigation bar are gone. The telephony function and the bottom bar (with date a