Error in BAPI_ACC_DOCUMENT_POST to post Special GL transactions

Hi,
I could not able to post the Special GL transactions like Bill of exchange payment request through BAPI BAPI_ACC_DOCUMENT_POST. It is giving error message BAPI could not process special G/L transacitons of type W not processed. Do we have any other bapi to process these special GL transactions.
Best Regards,
Radhakrishna.

Hi Arun,
Actually Special G/L Transction of type W i am posting through BAPI_ACC_DOCUMENT_POST
it is saying Special G/L transactions of type w are not supported. I have alreday searched for SAP note did not get anything.
So i thougt of working alternative process.
error message F5 246 Special G/L transactions of type & are not supported
Best Regards,
Radhakrishna.

Similar Messages

Posting error in BAPI_ACC_DOCUMENT_POST

Hi Experts,
I am trying to post an asset transaction by means of a BAPI BAPI_ACC_DOCUMENT_POST.In Release R/3 Enterprise the posting is rejected with error message (msg id : AA,msg num: 001) 'Asset & & not in company code &' .I have also checked the following things which can cause the error:
1. The asset is initially created with a non-0 sub-number, a defect
causes the error.
2. It is also possible that this asset is defined as a group asset. In
that case, it cannot be used as an asset.
3. The asset is not acquired.
But above things are OK,still I am getting the error message.I have also tried to implement sapnote '0000643232' but failed.Can anyone give any solution/reason for this error?.
Thanks,
Vineet

Hi Arjun
Pls find the code that I have tested for Asset Posting...
Header
BUS_ACT                        RMWE
USERNAME                     Sy-uname
COMP_CODE                   1200
DOC_DATE                       11.11.2008
PSTNG_DATE                   11.11.2008
DOC_TYPE                       SA
Asset and GL Items
ITEMNO_ACC                     0000000001
GL_ACCOUNT                    1000
ACCT_TYPE                       A
COMP_CODE                     1200
COND_ST_NO                     000
FUNDS_CTR                      S00001
ASSET_NO                        100000007
SUB_NUMBER                    0
CS_TRANS_T                     120
ITEMNO_ACC                     0000000002
GL_ACCOUNT                     476000
COSTCENTER                     S00001
FUNDS_CTR                      S00001
Currency Items
ITEMNO_ACC                     0000000001
CURRENCY                       SGD
AMT_DOCCUR                     100,0000
ITEMNO_ACC                     0000000002
CURRENCY                       SGD
AMT_DOCCUR                     100,0000-
Pls Advise
Thanks

Business Area error in BAPI_ACC_DOCUMENT_POST

I am using BAPI_ACC_DOCUMENT_POST to post an accounting document (FB50). In the header of BAPI parameter I pass BUS_ACT as 'RFBU'.
I am getting an error message Cost center belong to business area 'XXX' not 'YYY'. The reason is see for this error is there is a substitution rule defined saying if business area is blank, default this to 'YYY'. Business area is not passed through interface of BAPI, but business area 'XXX' is maintained in Cost Center master data.
In the case of BAPI, BAPI is getting the business area from substitution and during the function call 'K_COBL_CHECK' inside BAPI, the business area of G/L line item and business are from cost center is not matching.
But when the same is entered through FB50, its getting the business area from cost center and business area. Is there any SAP Note to solve this issue. Is any one aware of this.
Thanks
Vishnu

And if business area is blank (not maintained in cost center master) and you don't pass anything, BAPI works correctly right? If you could determine the business area , why not pass it to BAPI?
BAPI sometimes do have minor differences from online transactions.. I don't see it as a big issue.. you can look for OSS notes or see how others handled it...

Interest computation on Special GL Transactions

Dear Gurus,
We are on SAP 4.7 system and our requirement is to compute Interest to be paid to our Customers who have paid us Deposits. That is, the Deposits paid by Customers to us and booked using Special GL Transactions that lead to customer credit balances.
We have completed the configuration of Interest and the same is working fine for Debit balances. The computation is fine for all debit transactions.
However, the system is not computing Interest on Credit Balances lying in Customers Account thru Special GL Transactions. We have configured Item Interest calculation. The expectation is to compute interest on multiple Sp GL Line items of a Customer.
This is what we have done in configuration / spro:
Interest Calculation Global Settings:
1. Item Interest Calculation P for our Interest Indicators L1 and L2. (L1 assigned to Customer Master).
2. Number ranges
3. Prepare Interest on Arrears Calculation - L1 - configured to accept Open and all Cleared Items
4. Prepare Special G/L Transaction Interest Calculation - L1 Int Indicator mapped with L1
Interest Calculation
1. Define Reference Interest Rates
2. Define Time-Based Terms - L1 mapped with
Debit interest: arrears interest calc.
Credit interest: arrears interest calc.
3. Enter Interest Values
Now ideally speaking, maintaining these values, must lead to correct calculation of 'Computation of Interest on Special GL transactions'
The subsequent configurations are also completed, although, our understanding is that these are only for carrying out Financial Posting.
Interest Posting
1. Maintain Acct Determn - OBV1 - L1 is set up with Sp GL Indicator (somehow I feel this is not a required configuration for interest computation on Sp GL transaction but still tried with this one as well)
Please help.
Regards

Hi Venu,
Special g/l trans is not allowed in cash journal, but there is a workaround provided in OSS Notes: 532888
it states" Special G/L indicator (for example, for down payments)
The consideration of a special G/L indicator, in particular for down payments, has also not been provided for reasons of the simple useablity.
However, if you want to enter down payments in the cash journal, you should write a corresponding note as a workaround in the text field (for example, "Down payment"), post this amount to a clearing account that is intended for that in the cash journal and afterwards make a transfer posting of this clearing account with the corresponding special G/L indicator in the accounts receivable accounting."
hope this helps.
Please assign points as way to say thanks.

FBCJ Error - Enter a vendor for this accounting transaction

Dear Experts,
I am trying to enter expenses and I have mentioned Vendor Account No. in the Vendor field using splitting option with combination of Vendor Pay/Rec and All Expenses Business Transaction. But the document is not getting posted and giving the error - "Enter a vendor for this accounting transaction". But if I dont use split option it saves.
This problem I am facing for the last 2 days only. Can you suggest what could be the reason for this error.
Thanks,
Deb

Dear !!!
I have done everything as you suggested, but it is still showing the same message. Can you please look in to this again.
Thanks in advance !!!!
Deb

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Data inconsistency: posting with restricted transaction type (FAA_POST047)

Hi colleagues!
I have the following error:
Data inconsistency: posting with restricted transaction type
Message no. FAA_POST047
Diagnosis
You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
System Response
Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
Procedure
Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
Any ideas how to solve?
Thanks in advance

Hi Anton
This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
please verify and let us know the update. hope this helps
Best Regards
Jomon

Down payment request for other special GL transactions

Hi ALL,
Is it possible to post down payment request for other special GL transactions?
If not , I Have a scenario that I have to generate down payment request with different alternative reconciliation accounts , but same reconciliation account.
As we cannot assign different alternative reconciliation accounts for same reconciliation account in special GL indicator "F- down payment request), how to post down payment request with different alternative reconciliation accounts?
Even though I have created different special GL indicators for different alternative reconciliations accounts with same reconciliation accounts, I couldn't post down payment request, only down payment is possible. how to solve?
regs,
ramesh b

Please do the following
1. Activate Reconciliation account ready input setting for your Main reconciliation account in FS00
2. If you dont find the setting in FS00, then you have to change FSG settings for this account group in OBD4.
3. Also assign alternative reconciliation accounts to your reconciliation account
Now system asks you to input the alternative recon account when you do the transactions.
Rgds
Murali.N

Payment Terms field in F-43 Transaction(for Vendor special GL transactions)

Hi experts
Our Client requirement is like this:
Our Client uses F-43 for entering the special GL Transactions (I am sure that SAP has given F-48 but this is the way they use for quiet long time).
So here they enter Posting Key 39 and Special GL Transaction "J" which they have customised for some purpose. In this line item they want to see Payment Terms also. But SAP has not given that field in the transaction F-43 with Special GL functionality.
Even if we try in F-48 also this field is not given by SAP.
We have already cheecked by enabling the Payment Terms in Positng Key and GL Field Status group but of no use.
Is there any way we can get this field available for entry in F-48 or F-43 for Special GL Transactions.
Thanks in Advance
Rayala

Hi Rayala，
The functionality you required is not avaliable for down payment. because the BSEG-ZTERM is not necessary for down payment. if there is down payment happened, this down payment should be cleared with vendor invoice immediately.
The Alternative solution: suggest you to consider to use the allternative reconciliation account function instead of using special G/L indicator, then the BSEG-ZTERM could be avaliable for entering.
Hope the above information are useful to you!
With Best Regards,
Gladys Xing

LSMW for Special GL transaction

Hi,
I am doing a LSMW for upload open items for special GL transaction (TYPE W) with a Batch input. I couldn't do with the standard method (RFBIBL00) because the dynpro for SGL type W is very different. The problem is that the posting is not passing to the second position. It reads all the information but in the step 'convert data' only reads the first posittion (the one of the SGL). In the steps 'FIeld Mapping and conversiont' I can only assing the information of the SGL's dynpro.
Any idea?
Thanks,
Cecilia

For sugestion, define 'W' as default value in your recording and remove this field from upload sheet. If you got more than one entries like that execute in separated sheets.
If the situation remains contact a SAP or presence support to analyse your system.
Good luck and best regards

Error in OBYC: Account *** already used in transaction ***

Hi,
I was trying to change the GL account of one transaction key when it gave me an error message that it cant be used because it's already used in another transaction key. However, I noticed one GL account that was in GBB and in PRD but there was no error in it.. Just want to ask, is there a way to set a GL account that will allow it to be posted in 2 transaction keys? And also, what makes it possible to be used in two different transaction keys?
Thanks so much!
Regards,
Paula

Dear,
we can assign the same G/Ll with different modifier under same transaction event key, but we cannt assign same G/L for different transaction event key.
If u have not assigned this G/L to any other transaction event key then there should be some open document, that is why it is not allowing u to change the G/L.
Regards
AJIT K SINGH
HAPPY TO HELP U

How to post an Acquisition Transaction?

Hi,
I have already configured the consolidation of investments in SEM-BCS, however when i want to run the consolidation of investments, the system is saying "There is no consolidation of investments detected" hence i believe i need to post the acquisition transaction first so that this process can run.
The acquisition transaction to be posted is whereby a Subsidiary from a group is purchased by another subsidiary under the same group as follows :-
Before Acquisition :-
Group G1 = Subsid S1 + Subsid S2 + Subsid S3
After Acquisition of S2 by S3 :-
Group G1 = Subsid S1 + Subsid S3
Whereby Subsid S3 will contain Subsid S2 under it.
My question is, how do i post this transaction in SEM-BCS?
1) Do i have to post this in R3 using a journal and then the SEM-BCS will pickup this from R3? Or there is a special transaction screen in SEM BCS where i can post this kind of diversiture transaction directly into SEM BCS?
2) If i were to post this using a journal in R3, do i have to assign the trading partner values on the GL accounts so that the system knows this is a transaction involving inter-companies acquisitions?
Thanks in advance.

The posting of the acquisition depends on the COI configuration for location of values. If it uses totals, then an antry in the source ledger or posting level 01 or 10 in BCS to record the acquisitions should suffice. If the location of values for acquisitions is set to use additional financial data (AFD) then it must be posted in BCS via the AFD task.
Further, if the acquisition is to be posted in the source GL it is important to have the subsidiary as the trading partner on the investment account. The mapping normally transfers this as the investee for the investment account. It may be necessary for you to also update the mappings to ensure this is the case.
For acquisition, it is also important that the cons group master data has the same correspoonding period as the period of first consolidation for the subsidiaries being acquired. Otherwise you will get a message telling you that the period of first consolidation is incorrect or something of that nature.

Special GL transactions - deposit

Hi,
Just to confirm that automatic payment run will not pick up special GL transactions. It will only pick up open items posted to vendor /. customer reconciliation accounts?
Thanks.

Hi
The configuration of FBZP for APP enables us to give the special GL Indicatiors to be included in the payment run.
Also you may give the spl. GL indicators to be included in the exception list.
Please give us your query to give more specific answers.
regards
eashwar

FB60-No display of special gl transaction

Hi,
in the T.code FB60 special g/l transaction symbols are not displayed. According to my client he want to post special g/l transactions in FB60 only. he dont want F-43 and anyother.
When i want to in FB60. to choose a special gl indicator the system says no values found.
Please tell me what i has to do.
Thanks in advance.
Points will assign.
Regards,
Sankar

hi,
in the T.code OBXT for i take one special gl indicator. and i define the accounts respectively. there is one more button properties on top. in that if i choose noted items then it is not appearing. if iam not choose then it is appearing.
I said the samething my client is not accepting. What i said is correct or not please clarify me.
Regards,
Sankar

OBXR- Special GL Transaction Types - Modify Fields

Hello Gurus. We are on ECC 6.0 with New GL. Is there a way to modify which fields are available for the Special GL Transaction types in OBXR ? For example: In OBXR go to Properties. We selected Down Payment/Down payment request, later on when we enter a document via FB01 or FB50 or when we post a payment via F-28, and we select Posting Key 09 or 19 and use the Special GL Indicator we are able to display and enter information in BSEG-PRCTR (Profit Center field).
If on the other hand in OBXR we set up another Special GL Transaction type and we select Others, then BSEG-PRCTR (profit center field) is not even available, but we are able to enter BSEG-ZFBDT and later on modify this same field (BSEG-ZFBDT) via FB02.
I would greatly appreciate your guidance in how to modify/include additional fields in these Special GL Transaction types. Thanks!

Hi Enrique,
Are you referring to the document screen layout when you enter the document in the special GL transactions?
This is controlled by the field status of the posting key in question. Using transaction code OB41you can double click on the posting key (say 09) and inside you find something called as maintain field status. Clicking on the same, you will be able to see various groups under which you can make the necessary settings like optional/reqd/suppressed.
Thanks
Aravind

Error in BAPI_ACC_DOCUMENT_POST to post Special GL transactions

Similar Messages

Maybe you are looking for