Error in check_tableview_all_rows for a page with more than 1 tableview

Hello Gurus,
I have already seen few postings on the same issue but still couldnt find solution to my problem.
I have a page with 3 tableviews. My requirement is to select entries across the 3 tables, change the values and then save all the entried selected across the 3 tableviews and then they should all be unselected again as soon as the save is done.
I managed to do all but when I am using the method shown below in a loop^of that 3 tables or outside the loop onlmy the 3 rd table which is last field in the loop is getting unselected rest all still appears to be in selected state.
cl_htmlb_manager=>check_tableview_all_rows(
rowcount = wa_lines
request = runtime->server->request
id = 'table1'
check = ' ' ).
Could anyone of you help me on this or let me know if anyof you ever faced such issues.
Thanks,
Naveen.

Hello Raja,
Thanks for the reply. I am passing on the correct ID.
Whats the problem am facing is I am using this statement in a loop and then I am passing the corresponding ID ...It works but I guess its kind of behaving like over writing the previous.
I also tried using the same statement 3 times separately one after the other with each table id and still its happening the same with only the last table getting unselected and rest being the same as selected.
Thanks for your reply on this as am facing a lot of problem due to this.
Naveen.

Similar Messages

How can I enter "Flate rates for travel costs" with more than 2 decimals?

Hi expert,
I want to enter flat rates for travel costs in table T706F.
I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
I don't want to change the decimals for this currency.
I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
This seems pretty drastic.
Do you know if there is another way to handle this issue?
Thank you.
Kind regards,
Linda Verding

Hello Christian,
I have checked it with consultants from SAP Brussels.
They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
I will create a new currency (EUR3) with the description "for travel expenses only".
Kind regards,
Linda Verding

Support for file extensions with more than three characters when saving - I want my FLAC!

Why does the Wave Editor still drop characters from filenames with more than three character extensions when you save a file? But since -opening- a FLAC file with an extension of ".flac" doesn't get chopped to ".fla", why does Audition still chop off the extra character when -saving-?
It gets old quickly when you have to save, close and reopen files in order to get Audition's Multitrack editor to play nice and be able to find files when you reopen the Session.
Given that the FLAC filter is open source, I may just have to modify the code and recompile it to force a save to ".fla"... But of course, ".fla" is a Flash file extension, which I also use, so that is a crude hack for me.

Hi bro...
use in BYTE mode in place of in TEXT mode. and at the end of each line give some special charactor so as to distinguish between lines.This is effected by unicode check too
regards
Edited by: Mohit Kumar on Feb 9, 2009 9:44 AM

Oci error in report 6i in reports with more than 1000 pages

hi
in a report that has more than 1000 page output , run in report 6i while formatting pages an error occurs:
OCI error.==>SELECT NAME,
what this means?
please help me.
CAROL.

in reports that i know number of pages for example 1100 pageswhile formatting pages 150-200 this error occurs.
Did you get the error if total report pages < 1100?
indeed in another report with about 3500 pages output this error not occurs. Any diff. of setting/limits etc. between your two reports?

Can I use Pages with more than one user?

Hi,
I recently purchased Pages and want to be able to use it with two different users (one personal, one business). Is this possible? If so, how? I have no problem using it with the user I purchased it with, but my business user does not the option for Pages in the launchpad. How can I use Pages across users?
Thank you,
Britta

Pages should be installed in the Applications folder at the top level of your hard drive to be available to all users of that Mac. By default, if you are logged in as an administrator, applications are installed in this folder. I haven't done it, but I understand that if you are not an administrator, applications are installed only in that user's applications folder.
My installation of iWork is from the retail disc from more than three years ago but I did check for an app purchased from the Mac App Store in another user account on my Mac & had no problems finding it or launching it from Launchpad. Launchpad can be very cluttered &, unless you take the time to organize it, it can be very difficult to find a particular application. I would suggest trying to launch Pages from a Finder window or with a Spotlight search. And keep the Pages icon in the Dock for easy access the next time.

Error message when trying to log with more than a mobile account

Hi guys,
I face a very strange and worrying problem : when I log with a mobile account against my Snow Leopard Server, it works. But when I try to log with a second mobile using fast user switching, I have a strange error message saying that I can't connect with this user "at the moment". Once I log off from the first mobile account, I can log with the second one...
It is as if it is not possible to have two or more mobile/network accounts logged simultaneously on the same client. Is this a known problem ?
Thanks for your help,
Eric.

By design or not, this is a flaw, and a huge one ! I wanted to set up my home network so that each member of my family has a portable account. But this stupid design decision makes it impossible, since it makes impossible to have two or more users logged at the same time on a computer. So each time a member of my family wants to log on the family iMac, they have first to ask the previous logged member to log out !
How is that not a flawed design ? I don't even see what are the pros of that design decision ?

Want to block tracking for speed (page loading) more than privacy. Will it help? What are appropriate addons?

When loading pages, new sites off of Google new for instance, I notice that the page takes a very long time to load while analytics load for google, facebook, advertisers, etc, in the bottom left of the screen. It seems to have gotten much much worse in the last couple of years. The pages load MUCH faster with javascript disabled. But too many other web functions require javascripting to leave it off permanently.
Would a Firefox add-on help speed things up a bit by blocking tracking/analytics? Would it disrupt too much other content/service?
Thanks.

NoScript extension: 
https://addons.mozilla.org/en-US/firefox/addon/722 
http://noscript.net/
It is a royal pain to use until you get it setup for all your commonly visited website - there's a steep learning curve with NoScript, but I wouldn't surf without it.
If you are not already blocking advertisements, you might want to consider AdblockPlus and a good filterset. 
AdblockPlus 
https://addons.mozilla.org/firefox/1865/ 
Also, read this: 
http://adblockplus.org/en/getting_started
I keep a default version of Firefox installed to refer to so I don't forget what the average user has to deal with, when I am doing "support". It really irks me when web page loading is delayed while waiting for a a slow "ad server" to decide which advertisement it is going to load for me for that web page visit.

A&D ADSUBCON: wrong qty in delivery for subcontr.PO with more than one item

Hi gurus,
i created a subcontracting PO with 2 item: item 10 for 200 PC and item 20 for 500 PC.
When i create a delivery, using ADSUBCON (because i have to managed special stock E), the delivery quantities are wrong.
I mean: I obtain a delivery with item 10 for 500 PC and item 20 for 500 PC; same quantity.
It seems that SAP takes the quantity of the last PO's item ( in my example the qty of the second PO item 500PC).
I tried to invert the case: PO with item 10 for 500 PC and item 20 for 200 PC. The delivery created has 200 PC for item 10 and 200 PC for item 20
I also tried to create a PO not for MTO but for MTS and using ADSUBCON transaction the delivery quantity still be wrong but using ME2O it is correct (but this second case isn't my case because i need to manage customer stock E).
It is for this reason that i suppose that the problem is related to A&D...
Please, could you help me?
It is very important and urgent.
Thank you in advance for your collaboration.

i've not worked with ADSUBCON txn but could find a a note related to similar issue, have a look at it:
SAP Note 736737 - ADSUBCON: Problems with the performance and data display
yogesh

How can I add a date picker in Word for Mac 2008 with more than 25 items? I need to select calendar days so I need 31 items.

I am building a form for customers to complete. I want them to be able to click on a pull down menu and select the day of the month 1-31. The drop down form field only allows 25 entries. How can I get 31 entries? I'm on a Macbook Pro running Mountain Lion.

Hello,
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Sync pages with more than one iPad

I work in an office where we write and share documents...we all have iPads and would like to have an easy way to share between us and not have to click share and email the documents back and forth... Is there a way we can link them to update in real time???

Can you tell me how we would be able to sync through the cloud.... We all have iPads and are using the numbers app.. We have a spread sheet that gets new information daily.. But in order for everyone to see changes it has to be reshared... I need it to update in real time through all the users....

Intercompany transactions with more than two company codes

Hi fellow members,
We have a requirement for intercompany transactions with more than 2 company codes. The sales order is booked in company code A and goods are despatched from plant that belongs to company code B. However, we need the inter-company invoice to be posted between company code B and an intermediary company code C. The second inter-company invoice is to be posted between company code C and company code A.
There could be more than one intermediary involved based on the company code in which the sales order is booked and the company code of the delivering plant. Would appreciate inputs from the forum of how this could be achieved in ECC.
Appreciate your help
Regards
Rohit Zalani

Hi Rohit,
Two scenario require as per your requirement.
Inter company Sale between A TO B .
Cross Company stock transfer between B to C.
Sunil

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
 <f:facet name="second">
 <af:panelStretchLayout id="pa1"
 binding="#{backingBeanScope.Assign.pa1}">
 <f:facet name="center">
 <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
 binding="#{backingBeanScope.Assign.r1}"/>
 </f:facet>
 </af:panelStretchLayout>
 </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Error in check_tableview_all_rows for a page with more than 1 tableview

Similar Messages

Maybe you are looking for