Error in Collection Rebuild Cycle

Hi Guys,
I encounter some error when I try to rebuild the indexer . I found the message error in UCM.
The message is "Indexing aborted at 10/10/2012 11:32 AM Aborting Index build .Too many errors with finding and copying files to appropriate place".
Thanks and Regards,
Bamboo

Hi ,
"Indexing aborted at 10/10/2012 11:32 AM Aborting Index build .Too many errors with finding and copying files to appropriate place".
This indicates that there is some file system issue with contents found in weblayout / vault directories .
I would suggest you to run IdcAnalyzer so that these issues are captured and a file is created to rectify the same .
Thanks
Srinath

Similar Messages

UCM Indexer - Collection Rebuild Cycle errorring out

We are trying to run the indexer on a huge set of jpg files. The current count is around 2 Million. After we start the collection rebuild cycle, we get following errors. Can someone advise how to fix this? The first two errors are repetitive and ultimately indexing is aborted when we get the last error.
File is missing. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!syFileMissing,65c68c754793bf43,1,65572!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:80)
     at intradoc.common.Log.addMessage(Log.java:270)
     at intradoc.common.Log.errorEx2(Log.java:218)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:99)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:555)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:640)
     at intradoc.common.SystemUtils.err(SystemUtils.java:631)
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:586)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:216)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
*Failed to find indexable webviewable for content item 65c68c754793bf43 with revlabel 1 and dID 65572. Exception type is 'java.lang.Throwable'. [ Details ]*
An error has occurred. The stack trace below shows more information.
!csFailedToFindIndexableFile,65c68c754793bf43,1,65572!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:80)
     at intradoc.common.Log.addMessage(Log.java:270)
     at intradoc.common.Log.errorEx2(Log.java:218)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:99)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:555)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:640)
     at intradoc.common.SystemUtils.err(SystemUtils.java:631)
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:586)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:222)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
*Indexing aborted. Aborting index build. Too many errors with finding and copying files to the appropriate place. [ Details ]*
An error has occurred. The stack trace below shows more information.
!csIndexerAbortedMsg!csIndexerRenameFailedAbort
intradoc.common.ServiceException: !csIndexerRenameFailedAbort
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:608)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:222)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)

Some possible debugging ideas. (in no particular order)
1. Run IdcAnalyze (see the Trouble shooting guide in the documentation for details on how to run it). It is used to look at the existing file system, DB, and index. It can offer options (in the form of a batch file you can choose to execute) to fix issues.
2. Examine the files and CS settings to see what it is doing. In specific since this example is purely JPG files (non text non full text indexed) does this CS involve an IBR? The inbound Refinery settings may be off and keeping things from progressing to indexing. Conversion happens before indexing.
While debugging do set Verbose logging on sections (at least these sections but you can do more if you like) system,index* (the * is a wild card to allow for all index tracing sections)

Collection rebuild cycle issue

Hi,
I have run the indexer from 2-days.. its still running..
But jsu below the Collection rebuild cycle, there is message "Waiting for update cycle to finish(Try #1)..
What does it mean?
Is the Indexer Running?
Thanks

Some possible debugging ideas. (in no particular order)
1. Run IdcAnalyze (see the Trouble shooting guide in the documentation for details on how to run it). It is used to look at the existing file system, DB, and index. It can offer options (in the form of a batch file you can choose to execute) to fix issues.
2. Examine the files and CS settings to see what it is doing. In specific since this example is purely JPG files (non text non full text indexed) does this CS involve an IBR? The inbound Refinery settings may be off and keeping things from progressing to indexing. Conversion happens before indexing.
While debugging do set Verbose logging on sections (at least these sections but you can do more if you like) system,index* (the * is a wild card to allow for all index tracing sections)

Error Message: JBO-28020: Passivation error on collection TXN, node id -1

Hi all!
I've got this error when I try to run my BC4J Application:
Error Message: JBO-28020: Passivation error on collection TXN, node id -1
Error Message: JBO-28030: Could not insert row into table PCST_TXN, id -1
on this env:
SUN SOLARIS 2.7
OC4J DEV Preview (9.0.2.0.0A)
DB 9i + patchset 9.0.2
The SAME APPLICATION works right when deployed on this env:
W2k
OC4J part of JDEV9iRC2 (9.0.2.0.0)
remote DB 9i + patchset 9.0.2 on SUN SOLARIS
The Application Module is deployed as a Session Bean (BMT),
and I have a jdbc Datasource called jdbc/DeployDBDS.
I have also modified jbo.ejb.txntype from "global" to "local"
because with "global" it doesn't work...
Anyone can help me?
regards
Felix

First you'll want to read this BC4J "HowTo" article on how our persistent collection functionality works so you can decide whether you not you really want to be using it.
http://otn.oracle.com/products/jdev/htdocs/bc4j/bc4j_temp_tables.html
Likely you don't want to be, so this article explains how to avoid having its being used. It's typically a "last resort" feature that saves appserver memory by writing extra query results rows out to persistent storage if you query thousands of rows into memory and start scrolling around.
Down in your stack trace there is the error:
ORA-600: [19942]
This is a database internal error related to handling CLOB's and BLOB's. I see a few bugs that were reported in versions 8.0.5 but fixed in 8.1.6.
What version of the Oracle database are you using?

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Error while collecting Custom FlatFile related InfoCubes in CTS

Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks,

Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks,

Error Message: JBO-28020: Passivation error on collection TXN

I deployed my BC4J application. i fixed the jbo.server.internal_connection properties to point another
Oracle schema (bc4jpers) by creating the user like :
create user bc4jpers identified by password
default tablespace users
temporary tablespace temp
and after i gived this user the following grants;
grant connect, resource to bc4jpers
but during the execution of my BC4J web application i received the following error :
Error Message: JBO-28020: Passivation error on collection TXN, collection id 6,023, persistent id 1
Error Message: JBO-28030: Could not insert row into table PS_TXN, collection id 6,023, persistent id 1
oracle.jbo.PCollException: JBO-28020: Passivation error on collection TXN, collection id 6,023, persistent id 1
     void oracle.jbo.PCollException.throwException(java.lang.Class, java.lang.String, java.lang.Object[], java.lang.Exception)
     boolean oracle.jbo.pcoll.PCollNode.passivateElem(oracle.jbo.pcoll.PCollPersistable, oracle.jbo.pcoll.PCollNode, oracle.jbo.pcoll.PCollection, long)
     boolean oracle.jbo.pcoll.PCollNode.passivate()
     boolean oracle.jbo.pcoll.PCollNode.passivateBranch()
     long oracle.jbo.pcoll.PCollection.passivate()
     int oracle.jbo.server.DBSerializer.passivateRootAM(int, byte[])
     int oracle.jbo.server.ApplicationModuleImpl.passivateState(int, byte[])
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doFailover(oracle.jbo.ApplicationModule, oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie, boolean)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean, long)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean)
     void oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie)
     int oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.doEndTag()
     void secur.RegistreEditOctroi._jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
     void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
## Detail 0 ##
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 6,023, persistent id 1
     void oracle.jbo.PCollException.throwException(java.lang.Class, java.lang.String, java.lang.Object[], java.lang.Exception)
     void oracle.jbo.pcoll.OraclePersistManager.insert(long, long, int, oracle.jbo.pcoll.PCollKeyInfo[], byte[])
     boolean oracle.jbo.pcoll.PCollNode.passivateElem(oracle.jbo.pcoll.PCollPersistable, oracle.jbo.pcoll.PCollNode, oracle.jbo.pcoll.PCollection, long)
     boolean oracle.jbo.pcoll.PCollNode.passivate()
     boolean oracle.jbo.pcoll.PCollNode.passivateBranch()
     long oracle.jbo.pcoll.PCollection.passivate()
     int oracle.jbo.server.DBSerializer.passivateRootAM(int, byte[])
     int oracle.jbo.server.ApplicationModuleImpl.passivateState(int, byte[])
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doFailover(oracle.jbo.ApplicationModule, oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie, boolean)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean, long)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean)
     void oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie)
     int oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.doEndTag()
     void secur.RegistreEditOctroi._jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
     void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
## Detail 0 ##
java.sql.SQLException: ORA-00600: internal error code, arguments: [19942], [], [], [], [], [], [], []
     void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
     void oracle.jdbc.ttc7.TTIoer.processError()
     void oracle.jdbc.ttc7.Oall7.receive()
     void oracle.jdbc.ttc7.TTC7Protocol.doOall7(byte, byte, int, byte[], oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int, oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int)
     int oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(oracle.jdbc.dbaccess.DBStatement, byte, byte[], oracle.jdbc.dbaccess.DBDataSet, int, oracle.jdbc.dbaccess.DBDataSet, int)
     void oracle.jdbc.driver.OracleStatement.executeNonQuery(boolean)
     void oracle.jdbc.driver.OracleStatement.doExecuteOther(boolean)
     void oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()
     int oracle.jdbc.driver.OraclePreparedStatement.executeUpdate()
     boolean oracle.jdbc.driver.OraclePreparedStatement.execute()
     void oracle.jbo.pcoll.OraclePersistManager.updateBlobs(long, int, oracle.jbo.pcoll.PCollKeyInfo[], byte[], int, oracle.jdbc.OracleCallableStatement)
     void oracle.jbo.pcoll.OraclePersistManager.insert(long, long, int, oracle.jbo.pcoll.PCollKeyInfo[], byte[])
     boolean oracle.jbo.pcoll.PCollNode.passivateElem(oracle.jbo.pcoll.PCollPersistable, oracle.jbo.pcoll.PCollNode, oracle.jbo.pcoll.PCollection, long)
     boolean oracle.jbo.pcoll.PCollNode.passivate()
     boolean oracle.jbo.pcoll.PCollNode.passivateBranch()
     long oracle.jbo.pcoll.PCollection.passivate()
     int oracle.jbo.server.DBSerializer.passivateRootAM(int, byte[])
     int oracle.jbo.server.ApplicationModuleImpl.passivateState(int, byte[])
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doFailover(oracle.jbo.ApplicationModule, oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(oracle.jbo.common.ampool.SessionCookie)
     void oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie, boolean)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean, long)
     void oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(boolean, boolean)
     void oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.releaseApplicationModule(oracle.jbo.common.ampool.SessionCookie)
     int oracle.jbo.html.jsp.datatags.ReleasePageResourcesTag.doEndTag()
     void secur.RegistreEditOctroi._jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
     void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
Thank you very mutch for your tips.

First you'll want to read this BC4J "HowTo" article on how our persistent collection functionality works so you can decide whether you not you really want to be using it.
http://otn.oracle.com/products/jdev/htdocs/bc4j/bc4j_temp_tables.html
Likely you don't want to be, so this article explains how to avoid having its being used. It's typically a "last resort" feature that saves appserver memory by writing extra query results rows out to persistent storage if you query thousands of rows into memory and start scrolling around.
Down in your stack trace there is the error:
ORA-600: [19942]
This is a database internal error related to handling CLOB's and BLOB's. I see a few bugs that were reported in versions 8.0.5 but fixed in 8.1.6.
What version of the Oracle database are you using?

Error in collect statement(non-key fields must be numeric)...

Error in collect statement(non-key fields must be numeric)...
Hello Experts,
I created an internal table based from a ztable. The structure of the ztable is
as follows:
1. MANDT -> PRIMARY KEY
2. BUKRS -> PRIMARY KEY
3. TXK50 -> PRIMARY KEY
4. ANLKL -> PRIMARY KEY
5. KTANSW -> PRIMARY KEY
6. KOSTL -> PRIMARY KEY
Then the remainder of the fields(around 8 fields) are currency data types(ANBTR).
An error is showing saying 'You can only use the collect command in a table if all of its non-key
fields are numeric(type I,P or F).
I searched the forum and it said that non-keys must be numeric in order for the
collect command to work. But all of my primary keys are non-numeric.
Below is my declaration:
CLASS-DATA: gt_output_acq TYPE hashed TABLE OF zsd_output_acq
                              WITH UNIQUE KEY bukrs txk50 anlkl
                                              ktansw kostl,
                gt_output_ret LIKE gt_output_acq,
                wa_output_gen LIKE LINE OF gt_output_acq,
                gt_output_net TYPE HASHED TABLE OF zsd_output_net
                              WITH UNIQUE KEY bukrs txk50 anlkl
                                              ktansw kostl,
                wa_output_net LIKE LINE OF gt_output_net,
                gt_sort_crit TYPE SORTED TABLE OF t_sort_crit
                              WITH NON-UNIQUE KEY bukrs kostl,
                wa_sort_crit LIKE LINE OF gt_sort_crit.
FIELD-SYMBOLS: <fs_output_acq> LIKE LINE OF gt_output_acq,
                   <fs_output_ret> LIKE LINE OF gt_output_ret,
                   <fs_output_net> LIKE LINE OF gt_output_net.
COLLECT <fs_output_acq> INTO gt_output_acq.     "Here is the error

Hi Vijay,
Here it is:
CLASS-DATA: gt_output_acq TYPE hashed TABLE OF zsd_output_acq
                              WITH unique KEY bukrs txk50 anlkl
                                              ktansw kostl,
                gt_output_ret LIKE gt_output_acq,
                wa_output_gen LIKE LINE OF gt_output_acq,
                gt_output_net TYPE hashed TABLE OF zsd_output_net
                              WITH unique KEY bukrs txk50 anlkl
                                              ktansw kostl,
                wa_output_net LIKE LINE OF gt_output_net,
                gt_sort_crit TYPE SORTED TABLE OF t_sort_crit
                              WITH NON-UNIQUE KEY bukrs kostl,
                wa_sort_crit LIKE LINE OF gt_sort_crit.

SM13 - Error in Collect.Run - Yellow status update records.

Hello,
After some problems with update queues in R/3, we have some update records in yellow status "Error in collective run" in sm13 t-code.
If we run collective run, new records are pushed into rsa7, but this yellow status records won't move, and we actually need them.
Does anyone know how to process this errors?

Hi,
There is no problem with background process, the new update records are being processed with no problem.
These update records remain in yellow status since yesterday, but new records are being processed.

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

"Error Images" Collection question

Hi all,
I just noticed that this collection contains one of my images (DNG). However, I can't find a reason. File is not missing from hard drive, and it does not look corrupted or having missing metadata.
Is there way to find why Lightroom placed a picture into 'Error Images" collection?
Thanks.

I have seen that happen with a couple of files and there is only one reason that I have found so far; if the file is write-protected, and you try to write updated metadata, the file is added to error collection. (but you are also warned that "Writing XMP Metadata did not complete successfully" with choices to Ignore and Show in Library.)
But the "Error Images" collection is dynamic: if you start with, let us say 4 images in the collection, and you purposely write-protect, modify and attempt to write metadata to a file not in your current "Error Collection", your "Error Collection" only shows the most recent file.
The only other reason, and this is a guess, is that Lightroom for some reason, failed do some operation on a selection of files. I do not have time to try this but if would be good to know the underlying criteria that define "Error Images".
But in your case you say, that the file
>does not look corrupted or having missing metadata.
Then there must be other reasons, and it would be good to hear if any other users can enlighten us.

Error while collecting files in AE CS3 - You do not have permission to open this file (-54)

I've got a rather large project that I'm attempting to collect. 35,000+ files to collect (lots of image sequences as footage), totaling near 80GB. The collect process starts and copies files for a while, but inevitably errors out during the copy procedure with the error "You do not have permission to open this file" -- a different file each attempt.
I'd read some complaints of a similar error last year due to QT 7.4, but I'm on the current Quicktime (7.6.4).
Anyone seen this before? What can I do!? Thanks in advance for any ideas.
--Rob LaRose
Imaginary Forces

Well, we're just a small shop, but since it usually falls upon me to administrate, here's a few general tips:
Hide all resources that are not meant to be accessed by certain people. This can be done easily by using different sub-nets on your network and defining access privileges. Write down the network MAC addresses and use a whitelist/ blacklist. A bit of work initially, but a lot safer than working with user names.
Forget about individual user privileges. At one point or another everyone will bump into situations where they cannot access stuff, but need it for their work. Simply ramp up all users to Power User status, but assign individual groups to them which only you can manage. That leaves it up to you to define who can access what, but without having to dig so deep that you always end up with individual adjustments. You merely add or remove users from groups (which is more practical for interns and freelancers, even)
Quota can do miracles for you. If a user only has x GB of storage available, he'll quickly learn to not create redundant data by copying files.
Prevent all local storage. Artists have a tendency to offline files at whim for experimentation and then forget about it. Give them a "garbage dump" directory on the server instead where they can store their private data and any non-persistent work files, but with quota. Use server-side desktops and user home directories, if possible, but unfortunately many programs cause problems with that (including Adobe's), so it's not always an option.
For each new project, create a pre-defined folder structure. We e.g. use number_clientname_worktype_year for the root, and inside have directories for compositing, 3D stuff, print, client data etc.. Define it so from the getgo, that specific structures like project directories for 3D programs with their sub-folders for textures etc. are in place, but users cannot create additional folders. When they are forced to use existing folders, they will be much more careful in naming their files.
Define versioning rules and naming conventions. Now "siginificant milestone" is a matter of view, but I at least try to create new version files for that. So if e.g in the morning I open up a comp project and change a few things in it that take more than 10 minutes to reproduce, this is significant and a new version is safed. I don't care much for simple things like adding effects - I can reproduce them in a wee in case of crashes or data loss - but complex masking, elaborate 3D modeling, dynamics simulations etc. qualify.
Of course back up every day, at least incrementally. If following the above rules, this can be as easy as copying the project folder to an external disk.
As for the rest - simply be hard-nosed. Your artists will whine and complain for a while, but they will get used to it and eventually see the wisdom in a regulated system. It's also up to you to brief them accordingly and remind them from time to time.
Mylenium

I am getting following error when index rebuild

SQL> ALTER INDEX VECTORMAPLIN_IXS REBUILD;
ALTER INDEX VECTORMAPLIN_IXS REBUILD
ERROR at line 1:
ORA-14086: a partitioned index may not be rebuilt as a whole
i have given alter index VECTORMAPLIN_IXS REBUILD partition;
but i am getting error
plseas suggest how to proceed

VECTORMAPARE_IXS P0
VECTORMAPARE_IXS P1
VECTORMAPARE_IXS P2
VECTORMAPARE_IXS P3
VECTORMAPARE_IXS P4
VECTORMAPARE_IXS P5
INDEX_NAME PARTI
VECTORMAPARE_IXS P6
VECTORMAPARE_IXS P7
VECTORMAPARE_IXS P8
VECTORMAPARE_IXS P9
VECTORMAPARE_IXS P10
VECTORMAPARE_IXS P11
VECTORMAPARE_IXS P12
VECTORMAPARE_IXS P13
VECTORMAPARE_IXS P14
VECTORMAPARE_IXS P15
VECTORMAPARE_IXS P16
INDEX_NAME PARTI
VECTORMAPTXT_IXS P0
VECTORMAPTXT_IXS P1
VECTORMAPTXT_IXS P2
VECTORMAPTXT_IXS P3
VECTORMAPTXT_IXS P4
VECTORMAPTXT_IXS P5
VECTORMAPTXT_IXS P6
VECTORMAPTXT_IXS P7
VECTORMAPTXT_IXS P8
VECTORMAPTXT_IXS P9
VECTORMAPTXT_IXS P10
INDEX_NAME PARTI
VECTORMAPTXT_IXS P11
VECTORMAPTXT_IXS P12
VECTORMAPTXT_IXS P13
VECTORMAPTXT_IXS P14
VECTORMAPTXT_IXS P15
VECTORMAPTXT_IXS P16
VECTORMAPPNT_IXS P0
VECTORMAPPNT_IXS P1
VECTORMAPPNT_IXS P2
VECTORMAPPNT_IXS P3
VECTORMAPPNT_IXS P4
INDEX_NAME PARTI
VECTORMAPPNT_IXS P5
VECTORMAPPNT_IXS P6
VECTORMAPPNT_IXS P7
VECTORMAPPNT_IXS P8
VECTORMAPPNT_IXS P9
VECTORMAPPNT_IXS P10
VECTORMAPPNT_IXS P11
VECTORMAPPNT_IXS P12
VECTORMAPPNT_IXS P13
VECTORMAPPNT_IXS P14
VECTORMAPPNT_IXS P15
INDEX_NAME PARTI
VECTORMAPPNT_IXS P16
VECTORMAPROA_IXS P0
VECTORMAPROA_IXS P1
VECTORMAPROA_IXS P2
VECTORMAPROA_IXS P3
VECTORMAPROA_IXS P4
VECTORMAPROA_IXS P5
VECTORMAPROA_IXS P6
VECTORMAPROA_IXS P7
VECTORMAPROA_IXS P8
VECTORMAPROA_IXS P9
INDEX_NAME PARTI
VECTORMAPROA_IXS P10
VECTORMAPROA_IXS P11
VECTORMAPROA_IXS P12
VECTORMAPROA_IXS P13
VECTORMAPROA_IXS P14
VECTORMAPROA_IXS P15
VECTORMAPROA_IXS P16
VECTORMAPLIN_IXS P0
VECTORMAPLIN_IXS P1
VECTORMAPLIN_IXS P2
VECTORMAPLIN_IXS P3
INDEX_NAME PARTI
VECTORMAPLIN_IXS P4
VECTORMAPLIN_IXS P5
VECTORMAPLIN_IXS P6
VECTORMAPLIN_IXS P7
VECTORMAPLIN_IXS P8
VECTORMAPLIN_IXS P9
VECTORMAPLIN_IXS P10
VECTORMAPLIN_IXS P11
VECTORMAPLIN_IXS P12
VECTORMAPLIN_IXS P13
VECTORMAPLIN_IXS P14
INDEX_NAME PARTI
VECTORMAPLIN_IXS P15
VECTORMAPLIN_IXS P16
i am getting as follows
INDEX_NAME INDEX_TYPE
TABLE_NAME
VECTORMAPLIN_IXS DOMAIN
VECTORMAPLINE
VECTORMAPROA_IXS DOMAIN
VECTORMAPROADCLINE
VECTORMAPPNT_IXS DOMAIN
VECTORMAPPOINT
INDEX_NAME INDEX_TYPE
TABLE_NAME
VECTORMAPTXT_IXS DOMAIN
VECTORMAPTEXT
VECTORMAPARE_IXS DOMAIN
VECTORMAPAREA
VML_MASK_SID DOMAIN
OSVECTORMAPLOCALM
thase are the outputs
which shows above
my requirement is to build only 6 indexes
so
ALTER INDEX TEST_IDX REBUILD PARTITION INDX_2012 ONLINE COMPUTE STATISTICS
do ii need to give partion name or shall i give indx_2012
please let me know
thanks for help

Error when collecting web template to transport

Hi All ,
I am gettingthe following error
"No authorization for transporting role SAP_BWC_PATTERN_OBJECTS "
when I collect a standard custom web template which was create by copying 0analysis_pattern template and adding some customizations.
Please guide me.
Thanks,
HM

check tcode - SU53 for authorization error immediately after you get the error ,if you find some fwd it to ur basis to assign proper auth to your user id.
Hope it Helps
Chetan
@CP..

Error in collect function

Hi,
I am using below query for collect
select account_id_N,collect(connection_id_v) from My_test_table group by account_id_n;
but its giving me error as below.
ORA-00932: inconsistent datatypes: expected NUMBER got -
00932. 00000 - "inconsistent datatypes: expected %s got %s"
*Cause:
*Action:
can anyone please help me to find the mistake.
Thanks.

The document clearly states you must use CAST with COLLECT.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/functions024.htm#SQLRF06304
something like this.
create type emp_name as table of varchar2(100)
select deptno, cast(collect(ename) as emp_name) enam_list from emp group by deptno
/ Note: Collect function have some behavioral difference when used from SQL Plus and SQL Developer
COLLECT bug?

Error in Collection Rebuild Cycle

Similar Messages

Maybe you are looking for