Collection rebuild cycle issue

Hi,
I have run the indexer from 2-days.. its still running..
But jsu below the Collection rebuild cycle, there is message "Waiting for update cycle to finish(Try #1)..
What does it mean?
Is the Indexer Running?
Thanks

Some possible debugging ideas. (in no particular order)
1. Run IdcAnalyze (see the Trouble shooting guide in the documentation for details on how to run it). It is used to look at the existing file system, DB, and index. It can offer options (in the form of a batch file you can choose to execute) to fix issues.
2. Examine the files and CS settings to see what it is doing. In specific since this example is purely JPG files (non text non full text indexed) does this CS involve an IBR? The inbound Refinery settings may be off and keeping things from progressing to indexing. Conversion happens before indexing.
While debugging do set Verbose logging on sections (at least these sections but you can do more if you like) system,index* (the * is a wild card to allow for all index tracing sections)

Similar Messages

UCM Indexer - Collection Rebuild Cycle errorring out

We are trying to run the indexer on a huge set of jpg files. The current count is around 2 Million. After we start the collection rebuild cycle, we get following errors. Can someone advise how to fix this? The first two errors are repetitive and ultimately indexing is aborted when we get the last error.
File is missing. Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!syFileMissing,65c68c754793bf43,1,65572!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:80)
     at intradoc.common.Log.addMessage(Log.java:270)
     at intradoc.common.Log.errorEx2(Log.java:218)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:99)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:555)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:640)
     at intradoc.common.SystemUtils.err(SystemUtils.java:631)
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:586)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:216)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
*Failed to find indexable webviewable for content item 65c68c754793bf43 with revlabel 1 and dID 65572. Exception type is 'java.lang.Throwable'. [ Details ]*
An error has occurred. The stack trace below shows more information.
!csFailedToFindIndexableFile,65c68c754793bf43,1,65572!syExceptionType,java.lang.Throwable
java.lang.Throwable
     at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:80)
     at intradoc.common.Log.addMessage(Log.java:270)
     at intradoc.common.Log.errorEx2(Log.java:218)
     at intradoc.common.LoggingUtils.logMessage(LoggingUtils.java:99)
     at intradoc.common.SystemUtils.reportErrorEx(SystemUtils.java:555)
     at intradoc.common.SystemUtils.errEx(SystemUtils.java:640)
     at intradoc.common.SystemUtils.err(SystemUtils.java:631)
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:586)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:222)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
*Indexing aborted. Aborting index build. Too many errors with finding and copying files to the appropriate place. [ Details ]*
An error has occurred. The stack trace below shows more information.
!csIndexerAbortedMsg!csIndexerRenameFailedAbort
intradoc.common.ServiceException: !csIndexerRenameFailedAbort
     at intradoc.indexer.CommonIndexerBulkLoader.handleLoadError(CommonIndexerBulkLoader.java:608)
     at intradoc.indexer.CommonIndexerBulkLoader.loadRecordWebChange(CommonIndexerBulkLoader.java:222)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:310)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:165)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:439)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:348)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)

Some possible debugging ideas. (in no particular order)
1. Run IdcAnalyze (see the Trouble shooting guide in the documentation for details on how to run it). It is used to look at the existing file system, DB, and index. It can offer options (in the form of a batch file you can choose to execute) to fix issues.
2. Examine the files and CS settings to see what it is doing. In specific since this example is purely JPG files (non text non full text indexed) does this CS involve an IBR? The inbound Refinery settings may be off and keeping things from progressing to indexing. Conversion happens before indexing.
While debugging do set Verbose logging on sections (at least these sections but you can do more if you like) system,index* (the * is a wild card to allow for all index tracing sections)

Error in Collection Rebuild Cycle

Hi Guys,
I encounter some error when I try to rebuild the indexer . I found the message error in UCM.
The message is "Indexing aborted at 10/10/2012 11:32 AM Aborting Index build .Too many errors with finding and copying files to appropriate place".
Thanks and Regards,
Bamboo

Hi ,
"Indexing aborted at 10/10/2012 11:32 AM Aborting Index build .Too many errors with finding and copying files to appropriate place".
This indicates that there is some file system issue with contents found in weblayout / vault directories .
I would suggest you to run IdcAnalyzer so that these issues are captured and a file is created to rectify the same .
Thanks
Srinath

HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues

HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Mail rebuild mailbox issue with Gmail

I set up Mail 4.6 to receive and send e-mails to and from Gmail as per the instructions on the Gmail site and used additional information on this forum.
What is happening is whenever I rebuild the gmail folder it downloads again all the files I have deleated. I rebuild after deleting a lot of Spam and e-mails I no longer need.
As recommended the account is set as a imap account.
Under the mailbox tab it is set:
DRAFTS: Store draft messages on server - box not checked
SENT: Store sent messages on server - box not checked
           Delete message: dropdown set to: One day old
JUNK: Store Junk messages on server - box not checked
          Delete message: dropdown set to: One day old
TRASH: Move deleted message to the Trash mailbox - box is checked
             Store deleted messages on the server: - box not checked
             Permanently erase Delete message when: dropdown set to: One day old
Under the Advance tab it is set:
Enable this account - box is checked
Include when automatically checking for new messages - box is checked
Compact mailboxes Automatically - is greyed out - box is checked
Keep copies of messages for offline viewing: dropdown set to: All messages and their attachments
I am not sure is this last item of 'Keep copies of messages for offline viewing' refers to the the Gmail server or the mail box - if it is the gmail server then I guess Mail is just syncronising with this; thus any mails I delete will be down loaded again. ((All the other mail servers I use I set under Advance tab to 'Remove copy from server after retrieving message' - but this option is not shown for gmail.
Two things are happening:
a) When I delete files in the Mail, Gmail folder the next time I rebuild the mail box I get 1000 + emails down loaded; even though I may only have deleted 30 or so.
b) At other time mail will show downloading e-mails in the blue download indicator, but no new emails appear.
Would welcome some direction on how to resolve these issues; thank you.

The issue with g-mail became cronic. Now I can't delete e-mails received to my gmail account.
When I try to delete emails in the gMail or Mail inbox the following message is show.
The Message could not be removed to the mailbox (null)
The destination mailbox "(null)" does not allow messages to be moved to it.
This started after following the recomendation I found in the forum to sync gmail folders to the Mail - folders.
I am looking for solution to get back to the original condition that while not what it should be it is better than now.
Was hoping for solution were I wouldn't have to delete gmail account from mail then start again.
Any ideas welcome as I would like to delete emails in the gmail folders in Gmail without logging into Gmail every time.
Thank you

Budget accounting cycle issue

Hi friends,
I have a PO which was created and approved when Encumbrance was turned off (purchasing > setup > Organization > Financial options > Encumbrance tab) in the system (oracle 11i). but presently Encumbrance is enabled in the system and all the check box are checked in Encumbrance Tab. Now if i do invoice and make payment against that PO will it cause any Budgeting problem. I have tried this in our TEST instance and was successful. but i suspect it may cause problem later with any of the budgeting issue or may be in reporting. pls instruct me should i do it?
Thanks,
LISAN

and please share any budgeting documents, budget accounting cycle document.
Thanks you all.

JQuery Cycle issue with IE9

I'm in the process of reworking an old website and wanting to insert a JQuery Cycle slide show from the CS6 DW widget browser. The slide show looks beautiful on all browsers except, you guessed it, Internet Explorer.
Here's the deal, when loaded on IE9 the images overlap the text in the adjacent div. I have the same issue on another site whereby the images drop over the div located below. Again, this only happens on IE9, all other browsers work beautifully. Yes, adding padding to the widget div is a temp fix, but then creates a new issue by adding too much blank space on all the agreeable browsers.
Suggestions?
Many thanks.
Here's the site: http://www.thethinman1934.com/thethinman.html

Chris Wessling wrote:
Yes, adding padding to the widget div is a temp fix, but then creates a new issue by adding too much blank space on all the agreeable browsers.
If that temp fix helps, then you can apply it to IE9 only via an IE Conditional Comment.

Halo: Master Chief Collection - Pre-order Issue Confusion

Hey guys,
Just went to my Best Buy in Salem, NH to pick up Halo: Master Chief Collection. I knew the Map Book & Grunt skull were given only when you preordered (which is honestly why I pre-ordered the game because I love this type of stuff). I showed the girl helping me this link here which clearly shows just that (http://forums.bestbuy.com/t5/Let-s-Talk-Games/Halo-5-and-The-Master-Chief-Collection-at-Best-Buy/td-... She took my phone to show to her manager and came back telling me it's just something that I can purchase for $20, it's not free (even though the stack of books matched the number of preorders on the shelf behind her).This totally bummed me out because I knew it wasn't true, but didn't feel like arguing.
Hopefully someone from Best Buy can help me with this issue. I have my receipt for proof.
Thanks,
Nick

Hi Nick (Nbianco),
The multiplayer mapbook is indeed supposed to be a free bonus for customers who pre-ordered Halo: the Master Chief Collection, so it sounds like the manager you worked with may not have been familiar with the promotion. Like enuf mentioned though, you will regrettably need to return to your local store for assistance if you did not receive this bonus or were incorrectly charged for it. As long as an on-site rep captures your pre-order deposit, the game, and mapbook information when re-ringing the sale, then it should package out properly.
Thanks for your patience and understanding, as well as for pre-ordering with us!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Adobe Suite: Master Collection CS5 Migration Issues

I just fresh installed OS X Yosemite on my Macbook Pro 2008 model, and then migrated my applications, including an activated Adobe Suite: Master Collection CS5 product. Everything seemed fine, but this morning, whenever I open one of the programs, Adobe complains that the serial number is "not valid" for the product. How do I resolve this issue? Should I revert to my old time machine backup?

Oh. One more thing. I realize I did not deactivate the product on the backup. Could that be the issue?

Adobe CS6 Master Collection DISK setup issues

I duplicated the contents of all 3 dvds to the hdd as a backup, in case the dvds break.
However, when I run dvd 1's setup from the hdd, it eventually says to insert dvd 2 to continue installation, which I do, but it doesn't work.
1) What's wrong? Do I need to run dvd 1's setup from the dvd instead of the hdd to bypass the issue?
2) What's the best way of making a backup of the Master Collection such that the backup itself can be used to install? Copy and paste, like I did? Download the trials? Burn?

Hi Hawkcon,
When you back up the content from Adobe setup DVD then this is an expected behaviour to ask for Disk 2.
There are 2 solutions to this problem what I think of :-
1) Download the Trial of Master Collection CS6 from the below link and use that as the back up, your serial number will work with it as well.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
2) With you DVD set create a desktop installation point and then use that as the back up and installation. It will not prompt for the Disk 2 if you follow the steps properly as stated below.
http://helpx.adobe.com/creative-suite/kb/install-creative-suite-5-cs5.html
Thanks,
Manish

COPA Assessment Cycles Issue.

Dear All,
I have an issue with assessment cycles through COPA.
I have created assessment cycles for transferring the cost from cost center to products. So Maintained the sender cost center and cost elements but i maintained the receiver charecteristics which is not executing.
We have many charecteristics in copa report. But client has given the percentages for products only to distribute the cost from cost center to Products.
How can i achive this with proper execution of assessment cycles.
Regards,
Prakash.

Dear Prakash,
Check in Tcode KE24 whether values are posted for the combination of receivers you have mentioned in Assessment cycle. If the values are not posted for the combinations as receivers, system will not post the values through assessment cycle.Restrict the receiver characteristics for e.g. company code, Material Group etc.
regards,
Makrand

N900 Boot Cycle Issue

Hello everyone, my name is samantha and I just bought a new Nokia n900, it seemed a really nice phone with a very large potential, however I ran into a booting issue, the phone itself doesn't randomly reboot while I'm using application, as in other cases that I've been reading, but when I normally shut it down, I give it some time, and try to turn it on again, instead of a normal booting like this:
http://www.youtube.com/watch?v=HorA_H8TKdo
It repeats the cycle some times, for instance the first Nokia screen shows, then the dots, then a black screen, the the first Nokia Screen again, just like If I had just turned it on, and it will repeat a few times, and then eventually it will turn on.
Does anyone knows if this is an issue in the hardware?
Because I already read tutorials and flashed the emmc and the OS to the latest version, and it still doing it with the factory settings, no custom applications, etc.
I just turn it on after a full flash, use it a bit, such as taking pictures, playing chess, and then when I turn it off and try to turn back on, that strande boot cycle happns.

a reflash didn't fix it, so its probably a hardware issue, try raking it to a nokia repair center.
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Desktop Background - Slide Show - Fast Cycling Issue

I have an issue with my PC since upgrading from Windows 8 to 8.1. I have even tried a fresh install of Windows 8.1 and I am still having this issue. Not sure what the problem is and I'm looking for some pointers on how I can troubleshoot it.
What I do is set ANY Windows Theme, or any desktop background set of pictures, with more than one picture. I select the option to shuffle the background with various times from 10 minutes to hourly on when to change the background.
The issue is that 2 or 3 times a day the background starts quickly cycling, at a rate of a new background every second. This last about a minute and then it goes back to normal.
I know one solution would be to select one picture, but I am looking for a solution to get this to work as it should. Could this be a video card issue? Any help would be appreciated.
Thanks!

Hi,
It's really strange about this problem. Since a fresh installation can't fix this problem, We should consider the hardware problem or system installation disc problem.
I need to confim that whethter this problem occures as soon as system reinstalled? Did your computer join into domain? If this is Video card driver problem, you need to check Graphic Driver edition firstly, make sure it is compatible with Windows 8.1. What
about uninall Graphic driver and use system build in driver?
Roger Lu
TechNet Community Support

ITunes Artwork Screen Saver Not Working. Empty black screen. Garbage collection, memory leak issue? ... malloc: auto malloc[]: attempted to remove unregistered weak referrer 0x ...

Hey Smart Apples,
My iTunes Artwork screen saver is not working. After reboot, then selecting iTunes Artwork in System Preferences, just a black screen appears in the preview, as well as when pressing Test, and when allowing the screen saver to start on it's own. The error message in Console says...
11-10-13 2:13:18.304 AM [0x0-0x4f04f].com.apple.systempreferences: System Preferences(540,0x7fff77286960) malloc: auto malloc[540]: attempted to remove unregistered weak referrer 0x102021a10
11-10-13 2:13:18.305 AM [0x0-0x4f04f].com.apple.systempreferences: System Preferences(540,0x7fff77286960) malloc: auto malloc[540]: attempted to remove unregistered weak referrer 0x102021a60
also...
11-10-13 3:31:38.722 AM [0x0-0x65065].com.apple.ScreenSaver.Engine: ScreenSaverEngine(727,0x7fff77286960) malloc: auto malloc[727]: attempted to remove unregistered weak referrer 0x109eac410
11-10-13 3:31:38.723 AM [0x0-0x65065].com.apple.ScreenSaver.Engine: ScreenSaverEngine(727,0x7fff77286960) malloc: auto malloc[727]: attempted to remove unregistered weak referrer 0x109eac460
The memory address location at the end of each line is different everytime I preview the screen saver.
I've tried...
    deleting ~/Library/Preferences/ByHost/com.apple.screensaver.* files
    making sure each album has a cover in iTunes
    running Get Album Artwork in iTunes
    recreating symbolic link ~/Music/iTunes/iTunes Music -> ~/Public/iTunes Music/
... but doesn't help.
All other screen savers work... my usual is Flurry, and it works too, but gives invalid framebuffer operation under Console.
Nothing running/checked under Sharing.
Activity Monitor:
0     kernel_task    root    1.5    66    355.9 MB    Intel (64 bit)    124.7 MB
1     launchd    root    0.0    3    1.6 MB    Intel (64 bit)    38.7 MB
41     mds    root    0.0    4    104.4 MB    Intel (64 bit)    260.8 MB
93     WindowServer    _windowserver    9.0    5    81.5 MB    Intel (64 bit)    31.6 MB
26     coreservicesd    root    0.0    4    26.8 MB    Intel (64 bit)    37.3 MB
44     loginwindow    [userhandle]    0.0    2    22.7 MB    Intel (64 bit)    19.2 MB
152     com.apple.dock.extra    [userhandle]    0.0    2    12.0 MB    Intel (64 bit)    32.2 MB
19     opendirectoryd    root    0.0    8    8.3 MB    Intel (64 bit)    25.3 MB
192     applepushserviced    root    0.0    4    7.1 MB    Intel (64 bit)    29.9 MB
11     UserEventAgent    root    0.0    4    6.8 MB    Intel (64 bit)    41.7 MB
23     securityd    root    0.0    4    6.6 MB    Intel (64 bit)    32.9 MB
57     socketfilterfw    root    0.0    3    6.3 MB    Intel (64 bit)    31.7 MB
60     lsd    root    0.0    3    5.9 MB    Intel    32.8 MB
15     fseventsd    root    0.0    29    5.3 MB    Intel (64 bit)    45.9 MB
14     configd    root    0.0    7    5.2 MB    Intel (64 bit)    27.1 MB
144     coreaudiod    _coreaudiod    0.0    3    5.2 MB    Intel (64 bit)    32.6 MB
239     aosnotifyd    root    0.0    2    4.6 MB    Intel (64 bit)    28.2 MB
552     VDCAssistant    root    0.0    4    4.6 MB    Intel (64 bit)    30.2 MB
607     xpchelper    [userhandle]    0.0    2    4.4 MB    Intel (64 bit)    29.6 MB
37     revisiond    root    0.0    4    3.5 MB    Intel (64 bit)    27.9 MB
10     kextd    root    0.0    3    3.5 MB    Intel (64 bit)    15.0 MB
42     mDNSResponder    _mdnsresponder    0.0    3    3.4 MB    Intel (64 bit)    40.9 MB
30     warmd    nobody    0.0    3    3.2 MB    Intel (64 bit)    23.2 MB
71     netbiosd    _netbios    0.0    2    2.9 MB    Intel (64 bit)    40.8 MB
594     cupsd    root    0.0    3    2.9 MB    Intel (64 bit)    41.4 MB
600     taskgated    root    0.0    3    2.7 MB    Intel (64 bit)    28.6 MB
31     usbmuxd    _usbmuxd    0.0    3    2.6 MB    Intel (64 bit)    40.6 MB
591     writeconfig    root    0.0    2    2.5 MB    Intel (64 bit)    29.3 MB
33     special_file_handler    root    0.0    3    2.3 MB    Intel (64 bit)    21.1 MB
28     ntpd    root    0.0    1    2.0 MB    Intel (64 bit)    18.6 MB
204     filecoordinationd    root    0.0    2    1.9 MB    Intel (64 bit)    21.7 MB
20     powerd    root    0.0    3    1.8 MB    Intel (64 bit)    29.6 MB
48     hidd    root    1.0    5    1.8 MB    Intel (64 bit)    22.7 MB
55     autofsd    root    0.0    2    1.7 MB    Intel (64 bit)    21.6 MB
106     logind    root    0.0    2    1.6 MB    Intel (64 bit)    21.1 MB
94     CVMServer    root    0.0    1    1.6 MB    Intel (64 bit)    21.8 MB
17     distnoted    root    0.0    2    1.6 MB    Intel (64 bit)    21.1 MB
13     diskarbitrationd    root    0.0    3    1.6 MB    Intel (64 bit)    21.7 MB
608     activitymonitord    root    2.5    1    1.4 MB    Intel (64 bit)    28.6 MB
109     launchd    [userhandle]    0.0    2    1.3 MB    Intel (64 bit)    38.1 MB
546     Firefox    [userhandle]    1.5    21    389.6 MB    Intel (64 bit)    321.6 MB
551     Firefox Plugin Process (Shockwave Flash)    [userhandle]    0.0    5    22.4 MB    Intel (64 bit)    37.1 MB
540     System Preferences    [userhandle]    2.1    8    82.5 MB    Intel (64 bit)    321.8 MB
143     Finder    [userhandle]    0.2    8    61.8 MB    Intel (64 bit)    171.6 MB
328     mdworker    [userhandle]    0.0    4    48.0 MB    Intel (64 bit)    69.6 MB
140     Dock    [userhandle]    0.0    3    40.6 MB    Intel (64 bit)    35.5 MB
520     Console    [userhandle]    0.0    3    35.2 MB    Intel (64 bit)    41.5 MB
605     Activity Monitor    [userhandle]    12.1    3    23.6 MB    Intel (64 bit)    35.2 MB
142     SystemUIServer    [userhandle]    0.0    2    21.3 MB    Intel (64 bit)    50.5 MB
389     GrowlHelperApp    [userhandle]    0.0    3    18.2 MB    Intel (64 bit)    37.5 MB
207     AppleSpell.service    [userhandle]    0.0    2    13.0 MB    Intel (64 bit)    36.6 MB
155     ubd    [userhandle]    0.0    7    11.2 MB    Intel (64 bit)    26.8 MB
593     Image Capture Extension    [userhandle]    0.0    2    10.8 MB    Intel (64 bit)    33.0 MB
150     fontd    [userhandle]    0.0    2    10.6 MB    Intel (64 bit)    28.4 MB
166     Little Snitch UIAgent    [userhandle]    0.0    3    9.0 MB    Intel    30.8 MB
167     Little Snitch Network Monitor    [userhandle]    2.3    4    8.6 MB    Intel    31.9 MB
131     UserEventAgent    [userhandle]    0.0    3    8.4 MB    Intel (64 bit)    41.3 MB
141     talagent    [userhandle]    0.0    2    7.0 MB    Intel (64 bit)    30.5 MB
160     imagent    [userhandle]    0.0    4    5.4 MB    Intel (64 bit)    15.5 MB
290     iTunes Helper    [userhandle]    0.0    3    3.6 MB    Intel (64 bit)    29.7 MB
115     distnoted    [userhandle]    0.0    4    3.3 MB    Intel (64 bit)    25.3 MB
559     lsboxd    [userhandle]    0.0    2    2.7 MB    Intel (64 bit)    30.8 MB
304     cookied    [userhandle]    0.0    2    1.9 MB    Intel (64 bit)    30.3 MB
165     AirPort Base Station Agent    [userhandle]    0.0    4    1.9 MB    Intel (64 bit)    22.8 MB
154     warmd_agent    [userhandle]    0.0    2    1.7 MB    Intel (64 bit)    22.8 MB
146     pboard    [userhandle]    0.0    1    1.5 MB    Intel (64 bit)    19.7 MB
35     stackshot    root    0.0    3    1.1 MB    Intel (64 bit)    21.6 MB
12     notifyd    root    0.0    3    1.0 MB    Intel (64 bit)    25.3 MB
46     KernelEventAgent    root    0.0    3    988 KB    Intel (64 bit)    29.2 MB
584     launchd    _spotlight    0.0    2    784 KB    Intel (64 bit)    38.1 MB
586     mdworker    _spotlight    0.0    3    5.6 MB    Intel (64 bit)    22.9 MB
587     distnoted    _spotlight    0.0    2    1,008 KB    Intel (64 bit)    30.3 MB
16     syslogd    root    0.0    4    764 KB    Intel (64 bit)    39.2 MB
50     dynamic_pager    root    0.0    1    740 KB    Intel (64 bit)    9.4 MB
173     appleprofilepolicyd    root    0.0    1    724 KB    Intel (64 bit)    9.4 MB
59     memcached    daemon    0.0    6    640 KB    Intel (64 bit)    29.0 MB
Does anyone have a solution?
Environment: Mac OS X (10.7.2), Macbook Pro (late 2008)

So it turned out that the cause of the problem wasn't as complicated as I thought...
I had a few songs that were not added to the iTunes library, instead referenced from other locations on my hard drive.
Specifically, if you bring up the Get Info window of a song, under Summary > Where, it may show a different path than your usual iTunes Media folder location, set under Preferences.
E.g. Where: ~/Desktop/downloaded_song.mp3
I guess, this happens when you drag a song into your iTunes instead of adding it to the library, and apparently, causes problems with the Artwork Screen Saver.
Solution:
To correct it,
For those songs, go to File > Add to Library...
Then find and select the song file.
That's all I had to do to get the screen saver working... All your songs have to be added to your iTunes Library.
I think my brother was messing around with my playlist... I hope Apple nails a better way to lock-unlock/secure OS X soon (proximity sensor, biometric 3D face recognition, unique voice recognition, soul recognition, etc.).
That malloc error message still shows up; that must be an unrelated issue with the screen saver.
I hope this helps out all those suffering through the same issue with their iTunes Artwork Screen Saver.

HP LaserJet Pro 200 color MFP M276 -Device error and Cleaning cycle issues

This printer (HP LaserJet Pro 200 color MFP M276) will print 2 pages, clean, and then give an error message. It does this consistently. I have tried the suggestions posted in other forums and I have not had any luck. Any suggestions??

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Collection rebuild cycle issue

Similar Messages

Maybe you are looking for