Qty Contract Issue - Completed but Status still "Being Processed"

Hello,
I need help with a situation I am encountering. This is AFS specific.
Create QTY Contract for 100. Both the item and schedule like have completion rule "B" and the copy control between contract and order has document flow set to "2" and positive.
Scenario 1:
If I create a call off order for exactly 100 (same grid value), the contract is correctly set to COMPLETE.
Scenario 2:
If I create a call off order for 50 and another call off order for 50, the contract status is BEING PROCESSED.
We need the contract status in the second scenario to be changed to "COMPLETED".
Thank you,
Siobhan

Hai Siobhan,
In our system i created similar contract and sales orders, but both are showing completed only.
1. Can you check again with complete cycle up-to invoice.
2. After creating 50 + 50 two orders, Check whether system is allowing to create further more orders
Please post the updates of the issue.
Regards,
Mani

Similar Messages

Delivery status still 'Being Processed' although invoice had been created

Dear all,
I have a problem in production server.
Delivery status still 'Being Processed' although invoice had been fully created and status is cleared.
First, I get a problem when I tried to create invoice refer to this DN. Then I applied a message (execute report ZZBRE003: update table VBUK-WBSTK & VBUP-WBSTA = 'C'). Invoicing was created and status was cleared. But the delivery status still 'Being Processed'.
Could you help me, how to make this delivery status: Completed?
thanks,
Fella

Dear Fella,
I think that you haven't posted GI (confirmation of service) for the full delivery qty. Please check GI status for each item in the delivery. If any item shows partial delivery, post GI for the balance qty.
If any item has Partial Delivery Indicator 'D', the order can never have status 'fully delivered'. You must complete such items by entering a reason for rejection.
If that is not the case, there is a chance that copying ctrl (Delivery->Invoice) is not configured correctly. Choose a right value for 'Update Document Flow' in the copying control for the Invoice type from the delivery type used.
Please reward if helpful
Regards,
Noufel P

Sales Order status still "Being processed" after invoice (3rd party sales)

Dear SD gurus,
Here's what is done so far:
1. Create a sales order with one line (TAS item cat).
2. Trigger PR to be created. Approved the PR.
3. Create Purchase Order. Approve the PO.
4. Perform MIRO.
5. Create sales invoice based on sales order (billing based on supplier invoice).
6. Invoice released to accounting
Now, when I checked the sales order status, it's still showing "Being processed". However, invoice have already been created and released. I'm just wondering what else have I done wrongly. I believe the status should show "Completed" as well otherwise this order will keep showing up as outstanding in my sales order listing report.
Anyone got any ideas?

SAM
I had a looked at both the SAP Notes provided. Doesn't really apply in my situation. The Sales order was for 10 qty. My PR for 10 qty and I have also done a MIRO for 10 qty. even my sales invoice was for 10 qty.
I do not want to configure it to follow the PO quantity because I need a control where only vendor has delivered the products to the customer only then I should invoice the customer accordingly. If I allow the invoice to be created based on the PO quantity then the control factor will be lost.
I have yet to try the program that you recommended... will try that shortly.
And yes ... since I'm using the standard sap TAS item cat ... the "relevance for delivery" is already turned off and the billing is "F"

EXCISE INVOICE POSTED BUT STATUS STILL IN PROCESS

Dear All,
I have a G.R with 5 items and while doing G.R I have only captured the Excise.
And in J1IEX I have posted the same excise invoice. But after posting Status remain as "IN PROCESS" because of this I am not able to do the MIRO.
When I check in Table "J_1IEXCDTL-Excise invoice line item details" status field is updated with P (Posted) for only 4 line but the 5th line in " " (Blank=IN PROCESS).
FYI:All required registers are updated properly
Please suggest me how we can make in EXCISE DOC status as POSTED.
Thanks,
Dhanu

hi
plz check if any of the items GR is cancelled or reversed ,
or check the register type for each item thay have to be same
aslo check spro>log gen>Tax on Goods Movements>India>Basic Settings>Maintain Excise Registrations
here check no if EI make it 10 or 20
regards
kunal

Contracts - 'Document still being processed in the background; try again la

Hello,
When trying to make adjustments to multiple contracts we are receiving the error message 'Document is still being processed in the background; try again later.' We have tried again later to no effect.
Ultimately, this means that these contracts (30 altogether) cannot be altered in anyway i.e. held, deleted, released, approved and it means that they just sit there.
This also has implications when raising another contract to replace these contracts. For example if you want to use the same vendor this will cause great confusion for our users when trying to select the correct correct to spend money against when raising purchase orders. Often the result is the user selecting the wrong contract.
Have you any suggestions on why this error message is appearing?
Many Thanks,
Sarah

1465740 - SRM document is stuck in the approval process
Symptom
Workflow hangs.
Workflow gets stuck.
SRM document in status waiting.
Approval process cannot continue.
SRM document frozen in status 'awaiting approval'.
BBP_PD 443 Document is still being processed in the background; Try again later
BBP_ICON_TEXTS 049 No workflow started. Application error occurred
Environment
SAP Supplier Relationship Management
Reproducing the Issue
Create or change a document in SRM.
Cause
*Not possible to identify root cause without further deeper analysis
Resolution
Find the object guid of your SRM document via transaction BBP_PD.
Then display the relevant workflow instance via transaction SWI6 using the following steps:
Select BOR object type.
Enter your object type.
Enter your guid (or document number in the case of shopping cart) in the Key field.
Select variant All Instances.
Select selection period All.
Hit execute.
Click on icon 'Display workflow log'.
Click on icon 'List with technical details'.
Click on icon 'Print Log'.
Record the date and time of the very last step in the workflow log.
Using the date and time of the last workflow step, here are some transactions that can be used to investigate the root cause of the problem.
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Enter the task number and hit enter e.g. 14000044
Choose 'Test Environment' and flag 'Including parts'
Execute
Choose 'Consistency check for components' and flag 'Including subworkflows'
Execute
Red lights indicate an error in the definition.
Header Data
Released on 05.05.2010 09:53:08
Release status Released to Customer
Component SRM-EBP-WFL Workflow
Priority Normal
Category Problem

I have skype premium but am still being charged fo...

Hello,
I purchased a subscription to skype premium but am still being charged for calls I make to a US mobiles. Why? I am currently living in France, does this make a difference? I assumed Skype premium allowed free calls to US land lines and mobiles.

Hi,
Skype Premium bundle with Unlimited US & Canada is offered only to US and Canada customers at the moment.
If you are located in France then you will only get Skype Premium, which doesn't include Unlimited US&Canada, therefore calls are charged from your Skype balance.
Skype Premium alone enables you to make group video calls https://support.skype.com/en-us/faq/FA10868/What-is-Skype-Premium
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

I haven't used my 'free' CC membership over a year but am still being billed? I have tried to cancel it but it makes it out as if I am not charged anything and doesn't let me me cancel...How am I supposed to get out of these payments

I haven't used my 'free' CC membership over a year but am still being billed? I have tried to cancel it but it makes it out as if I am not charged anything and doesn't let me me cancel...How am I supposed to get out of these payments. I have tried to contact adobe but it has been close to impossible.

Hi jacksteger
There are no active subscriptions under the Adobe ID you used to post on the forum.
Please check if you signed up using a different Adobe ID/email address and sign in with these details to see any active plans and get assistance with cancellation via the support page - Cancel your membership or subscription | Creative Cloud
Kind regards
Bev

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

Why the Sales Order is still being processed?

Hi,
This process is done: Sales Order (RE - Return) --> Return Delivery (Goods receipt) --> Billing
Sold-to party wrongly entered in the Sales Order, so they wanted to close the Sales Order. They did Cancellation for Billing (VF11) and reversed the Goods receipt (VL09).
Also, Reason for Rejection is put in the line item (VA02). However, the status of the Sales Order is still Being Processed instead of Completed.
From the Data Flow, it states that order-related billing status is still open*. But the Billing documents and Accounting documents are Completed and Cleared respectively as seen from the Data Flow.
How to close this Sales Order?
Thanks.

Dear Friend,
If you want to close any particular order then go to order reason and give the reason and save it.
The system will automatically close the order and would show processed and in the due lists also it would not appear.
award points if helpful,
regards,
Amlan

BPS/Web: 'Your previous query is still being processed'

Hi,
One of our users get the following message when clicking on a page link in a BPS web application we designed:
'Your previous query is still being processed'. The user is only clicking once on the link and gets in an endless loop (when monitoring the system, no activity can be seen).
All our other users are fine. We checked the internet explorer settings of this user and they are identical to all the other users. We know it is not linked to the user ID or the portal.
Has anyone already seen this ? Any idea where we should look at ?
Thanks for any help.
David

Hello David,
on one hand you are saying only one user has the problem but on the other hand you write that it's not linked to the user ID?
If the frontend settings are OK, then it might be a firewall issue. Some of them block ports or filter JavaScript.
Regards,
Marc
SAP NetWeaver RIG, US BI

Sourcing Cockpit: Document still being processed in background

Dear experts,
we are facing the following problem in SRM 5.0 extended classical szenario.
In transaction Sourcing Cockpit when I click on create PO I reach the "Sourcing - Document Preview" screen, where I can click on button "Process PO".
Everytime I click on button "Process PO" I get the error message "Document is still being processed in the background; try again later".
PO is created but in status HELD. I have to go to transaction "Process Purchase Order (BBP_POC)" in order to create PO so that status changes to ORDERED.
There are no entries in table BBP_WFLOCK.
Thanks in advance and best regards
AD

Thanks for your answer.
Regarding your points:
1) It happens in almost 95% of the cases but as per now we could not figure out a rule when it happens and when not.
2) yes, it happens also after logoff.
For the user that is working in sourcing cockpit, the following entries are in SM12:
100 USER1 14:06:36 X CRMD_ORDERADM_H 10047BDCB4F6CD52BF8E1000000AC1ABC35 1 0
100 USER1 14:06:36 E PRCD_HEAD 10047BDCDBE6CD52BF8E1000000AC1ABC35 1 1
Regards
AD

Document is still being processed in the background

Hi guys.
I receive this error when wanting to Change a purchase order in SRM. The PO is already in R/3, and the user has tried to make the GR in SRM. This GR then failed in R/3 because of incorrect accounting data, so I changed this in SRM. Then the PO changed to status Awaiting Approval, but we do not use any workflow for approving POs. Plus when trying to change the PO I get the message Document is still being processed in the background; please try again later. Well, this has been there for over a week now, and I have searched both this forum and also SAP Notes, but cannot seem to find anything that helps me.
There are no locked entries in the BBP_WFLOCK table, just as there don't seem to be anything in the RFC queues. I have checked the SC, PO and Confirmation in the BBP_PD, but no news here.
Something that interested me though is that in BBP_PD for the PO it seems that there are 2 active versions...?
Any other idea as to how I can "release" this Purchase order again?
Thanks for info.
DM

Hi,
Let me know the following things.
1. Do you see any approver in the approval preview of the purchase order , you have told that you are not using any workflows , but i wanted to make sure.
2.When do you get the message"document is still being processed in the background" ? is it when you change the purhcase order?
3) please have a look at the workflow log using the transaction 'SWI6', use the object type as bus2200 , use purchase order GUID and then see wether the setreleased has been run for the purchase order.
4) if the setreleased is not done , then you have to run the setreleased method for the purchase order.
award points if usefull
Message was edited by:
khan voyalpad usman

Bad workflow ? :-( document is still being processed in the background :-(

Hi guys,
I have activated workflow without approval for PO's (saved & changed: WS14000075).
Everything was working fine.. BUT.. For some reason, now some PO documents have the status "Waiting Approval", and if I try to edit them,I got the following message: "document is still being processed in the background"
How can I fix this ?
Thanks for your help guys !
Best regards,
Diego

Hello Diego,
I've already seen this kind of pb.
You should navigate to the admin workflow runtime (menu swld) then administration --> workflow runtime, there is some usefull transactions.
First check the customizing (SWU3) and ensure that workflow runtime is ok.
Then try to restart wi in error (SWPR and/or SWPC) and check RFC transactions (SWU2).
Rgds,
Pierre

Document is still being processed in the backgroud

Hi:
We got a error message while changing this PO.It says "Document is
still being processed in backgroud.Try it later" and the PO's satus
is "awaiting approval".We use the workflow templete "WS14000075".For
hope someone can help me.TKS

Hi
Which SRM version are you using ? Please try this ->
You can try to use Function Module using SE37 Transaction - BBP_PD_PO_STATUS_CHANGE_WF, enter the Header guid and IV_status =1, Then check again the Purchase order.
Related useful links ->
Document is still being processed in the background
Document is still being processed in the background
PO Deletion Error
Bad workflow ? :-( document is still being processed in the background :-(
docu is still being processed, try again later
Do let me know.
Regards
- Atul

Qty Contract Issue - Completed but Status still "Being Processed"

Similar Messages

Maybe you are looking for