Error in CONVERSION_EXIT_CUNIT_INPUT
Hi ,
when i am trying to convert ST to internal formatt using FM 'CONVERSION_EXIT_CUNIT_INPUT', I am getting the errror
'Unit ST is not created in language EN', I Have cheked in T006 Table there is no entrey is maintained for the ST.
BUT When i have chekd in CUNI transaction the configuration is maintaines. so can anybody help how to the entry is filled in the Table T006 .
regadrs
Raghu
Hi Raghu,
Use below function module for conversion.
CONVERSION_EXIT_CUNIT_OUTPUT.
You will get PC(Pieces). Entry with PC exits in T006 table.
Thanks,
Ashok.
Similar Messages
-
Help on this error? CONVERSION_EXIT_CUNIT_INPUT
Hi,
I am loading a flat file and got the following errors:
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Message no. RSAR137
Diagnosis
An error occurred in record 84075 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field VOLUMEUNIT.
Procedure
Check that the record where the error occurred has the correct format, and correct it accordingly.
The data could not even get to the PSA because the load failed.
Any help to deal with this problem?
ThanksHi,
This is on production so the option to create is not available.
I tried it on Dev and the option to Create exists.
Now, I am trying to understand the significance of what you are directing me to do because, I have similar monthly reports and 7 of the flat files loaded successfully but one. So if the problem is u201CVolu201D which in fact, was not available in the CUNI output, then why did the file load for the other 7 files but this only. That is what I am wondering now.
Also, doesnu2019t the original error suggest that the error is due to just a single record?:
u201CAn error occurred in record 84075 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field VOLUMEUNIT.u201D
Thanks -
Error in flat file loading : Important
Hi !
I am using BW 3.5 . I am loading data from flat file which has a KF VOLUME and UOM as USG but it is giving error as Conversion exit error.(CONVERSION_EXIT_CUNIT_INPUT).
Please tell me what should i do ?Dear Rajib Goon
Its won't be a much problem.
Open your info source, in the Key Figures Transfer View, you can see a one column name called "Fixed Unit Of Measurement". Here enter "USG" for the Keyfigure VOLUME & Reschedule your info package.
Hope this will help you lot.
Regards
Saravanan.ar -
Loading a Spanish language flat file
Hi frnds
I am trying to load a flat file of spanish language to ODS, I am getting an error saying "CONVERSION_EXIT_CUNIT_INPUT"
Can anyone tried loading other languages, other than english.
Regards
Kumar
Edited by: BW Kumar on Oct 21, 2008 10:27 PMHi
Just check for all lower case character in you file, all characters should ne in upper case.
You may also choose to edit this single records in PSA and process further.
Regards
Sudeep -
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Dear all
I got the following error
" Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT "
This is an original sample data.
~
CUST007,SREP07,MAT008,3,DZ,1,,19990424
CUST008,SREP08,MAT008,3,DZ,2,,19980328
CUST008,SREP08,MAT009,2,CS,3,,19980203
CUST008,SREP08,MAT010,1,LB,4,,19991104
CUST009,SREP09,MAT011,1.5,LB,5,,20000407
CUST010,SREP10,MAT011,1.5,LB,6,,20000701
~
you can download it from [ http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv ]
As you can see , [T-Code CUNI screenshot] ( http://static.flickr.com/35/71412534_4998517812_o.jpg )
there is no LB.
so i tried to create LB. but... i couldn't ..
Because, LB already exists in the Table T600 & T600A
T600 screenshot ( http://static.flickr.com/35/71412793_dcbae3d11a_o.jpg )
T600A screenshot ( http://static.flickr.com/34/71412535_96f9278862_o.jpg )
What do you think ?
The value of SPRAS is DE.
is it possible to cause the error ?
Well, i deleted the value of UNIT column from the original data so that i could escape the error " Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT ".
~
CUST007,SREP07,MAT008,3,,1,,19990424
CUST008,SREP08,MAT008,3,,2,,19980328
CUST008,SREP08,MAT009,2,,3,,19980203
CUST008,SREP08,MAT010,1,,4,,19991104
CUST009,SREP09,MAT011,1.5,,5,,20000407
CUST010,SREP10,MAT011,1.5,,6,,20000701
~
But i don't think it is a right way. isn't it?
Thanks in advance.
David.KangDear Eugene
Thanks a lot today.
Yeah, my incoming data do not match with the transfer structure.
Take a brief look at my case studies.
[Data Selection] tab
http://static.flickr.com/34/71452760_2117e1d4c0_o.jpg
[Data targets ] tab
http://static.flickr.com/34/71452762_035aaa8d78_o.jpg
[Processing ] tab
http://static.flickr.com/34/71452763_fa322fe8f1_o.jpg
[External Data] tab
1) IC_DEMOBC.csv ( It includes the value of UNIT column. )
( The original data file is http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv )
http://static.flickr.com/20/71452764_fb4a24a809_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71452765_07a4ae8e12_o.jpg
2) IC_DEMOBC2.csv ( It inculdes only two rows with UNIT values : CS. )
http://static.flickr.com/20/71452766_da7b2c46b7_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71453112_348077e31a_o.jpg
3) IC_DEMOBC3.csv ( It inculdes all rows without UNIT values. )
http://static.flickr.com/34/71453113_301afeca73_o.jpg
- Preview result screenshot
http://static.flickr.com/20/71453114_8438122d06_o.jpg
I try to solve it by myself.
( i already spend almost one week~~ . )
but i feel the end is coming soon.
with kind regards
david -
Error:CONVERSION_EXIT_CUNIT_INPUT
Hello All,
I am facing a problem with Flat file load. When I am tring to load master data attributes for a custom infoobject, I am getting the error:CONVERSION_EXIT_CUNIT_INPUT, eventhough there are no Unit infoobjects as attributes to it. Strangely, I am getting this error in my development system but not in the acceptance system.
Could anyone let me know how to overcome this problem.
Many thanks in advance,
Regards,
VinayHi Vinay,
BW system global settings are generally the same you can change directly in the InfoPackage and this kind of error are generally related to:
1)File Format ASCII or CSV, with the corresponding symbol for CSV (Escape character, ...).
2)Character for decimals or thousands.
3)Sequence and number of digit of the different fields of the Flat File related to the fields of the DataSource.
4)Error if in this moment you have opened the file.
5)Correct path of the file.
6)Error due to text without exit from InfoPackage and RSA1: in many case you have solved the problem, but if you do not go back to the initial screen of BW the system doesn' t feel the changes.
7)Problem with the connection to the source system: in source system tree right mouse click on your SS and select control/check.
Try checking all the settings of the other system, where the preview is functioning, with the system where it is not functioning and let me know please.
Ciao.
Riccardo. -
Error: CONVERSION_EXIT_CUNIT_INPUT and 0Unit
Hello Experts,
1.
I am loading a simple .csv (Excel) file and I get the error:
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Any hints here?
2.
--Somehow I suspect the column for Units (0Unit), with values: Case, Each, Dozen, U.S. pound, can be the culprit. Where in BW can I see the list of approved values in 0Unit to see if these 4 values are in the list?.
Thanks in advance.hi Amanda,
table t006* contains 'master' data for all unit of measurement, characteristic 0unit.
to populate data of any characteristic infoobject that reference to 0unit, the value must exist in the table.
to display the table you can use transaction se16.
for entry/maintain you can use transaction CUNI
or first transfer from r/3 use rsa1->source system->right click r/3 source system->'transfer global setting', mark 'unit of measurements' and choose option 'update table'->execute, after that se16 check if EA and DZ exist or not (also the other 2 values).
as i mentioned, we cannot maintain unit for 'Case, Each, Dozen, U.S. pound'. for unit just have 3 digit.
i do suggest, first correct your .csv file for these values, 'each' with EA and 'dozen' with DZ, don't know code the Unit Of Measurement for 'case' and 'us pound'.
if no standard code for case and us pound, you may define them with transaction CUNI, e.g us pound with USP, remember to change the .csv value with the same.
hope this helps. -
Error CONVERSION_EXIT_CUNIT_INPUT - RSAR137
Hi all,
I have an error CONVERSION_EXIT_CUNIT_INPUT - RSAR137 when i try to load a CSV file in a ODS.
I have this error only when I try to load the file from Application Server, if I load the CSV file from workstation it loads without errors.
I use this IO: 0CRM_SALUNI
I have to load HL measurement units, I found the SAP Note 681931
For RSAR 137: Error in the conversion exit ...
Loaded values must have the external format in the logon language.
The conversion exit reads from the T006A table with the logon language from SPRAS and the loaded value from MSEH3.
If there is no entry there for the logon language, an error occurs in the conversion exit.
You can maintain entries in this table in the Customizing:
Transaction SPRO->SAP reference IMG->BW Customizing Implementation Guide->General Settings ->Measurement units.
Select the measurement units here using the relevant button.
But in my Transaction SPRO everithing is ok...
I can not understand where is the problem.
Thanks to all,
axhi Rizzo,
seems that there is something wrong with your unit filed which u r loading from flatfile.
i think the Unit which u r loading should be maintained in the Table T006* eg. (T006A).
to transfer from R/3 use the following setting go to source system in RSA1--> right click and Click on 'Tranfer Gloabal Setting'
hope this willl help you.
thanks -
Error in converstion exit CONVERSION_EXIT_CUNIT_INPUT
Hi All..
I am getting the fallowing error while trying to load data from flat file(fu- fu book).
"Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT". The csv file has the following values as unit of measure "CS, DZ,EA and LB".
I changed CS to CSE but i am not sure whats the correct unit for DZ, i am hoping that EA and LB are right values.
appreciate if some body can help me in figuring out the right UOM.
will reward the helpful answers..
Thanks in advance
Deepthi.Hi Deepthi,
Welcome to SDN!!
Also check these posts:
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Need help on this error
errors-urgent help needed
Re: 0Unit / se16 / CUNI
Bye
Dinesh -
Error while creating INFOPACKAGE to load transaction data
Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
<i>Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. </i>
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
Function Module = CONVERSION_EXIT_CUNIT_INPUT
Press F8 in order to execute
This would be help a bit
3) corrected data from the flat file
another alternative solution was by:
handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ- -
Error while loading CSV Flat file
Hi,
I am getting the following errors while loading a flat file into the DataSource:
1. Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
2. Error 'The argument '9,018.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSA record 1 value 9,018.00
What can I do to correct this?
ThanksI am taking the following (Headers) fields in this order in a CSV file :
0LOGSYS ,0MATERIAL,0UNIT,0BASE_UOM,0COMP_CODE,0PLANT,0FISCPER,0FISCVARNT,
0CURRENCY,0PRICE_TYPE,ZTVSAKF,ZVOTVSKF,0PRICE_CTRL,ZPRICE_STKF,0PRICE_BASE,
0VAL_CLASS,0CURTYPE,0VALUATION
I have added all these fields in the DataSource as well. T-Code CUNIT has CS as a Unit.
I deleted and recreated the DataSource and am getting this error now:
Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
Error 'The argument '1,398.00' cannot be interpreted asa number' on assignment field /BIC/ZTVSAKF record 1 value 1,398.00
Error 'The argument '8,10.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSKF record 1 value 8,10.00
Error 'Unit 0 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field BASE_UOM record 1, value )
Error 'Unit CS is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value CS)
Error 'The argument '5,50.00' cannot be interpreted as anumber' on assignment field /BIC/ZTVSAKF record 1 value 5,50.00
Does it matter what order the columns are in? -
Hi Experts,
I am loading data to Sap demo cube(Purschasing Data) from flat file,I am getting the following error CONVERSION_EXIT_CUNIT_INPUT for field BASE_UOM.
The unit in T code CUNI it is ST and is items,but what changes do I need to do in Transfer structure or need to right a routine please guide me to solve the problem.
help appreciated,
Thanks in advance
Ragahi Raga,
ST has to be exist in T006* table, normally unit is transferred from sap source system (r/3) via 'transfer global setting'.
you can maintain with tcode CUNI, you have tried ?
check how to CUNI in
Error: CONVERSION_EXIT_CUNIT_INPUT and 0Unit
0Unit / se16 / CUNI
hope this helps. -
Hi Experts,
Yes, i have one column 'unit' is blank. meaning no value in that column. how can i flag this error off? where shall i set?
"Error in conversion exit
CONVERSION_EXIT_CUNIT_INPUT"
It seems i only have this error when i upload my file to the app. server and load thru the process chain.
i dont encounter this error if i load my file from my local C drive, and without using the process chain.
Why is it happen like this and why is it work differently whereas my file values remain the same?Hi,
this error will occur when the file format is not matching to data source structure. check do you have all file permissions in your app.server(like read, write and delete). are you doing any changes to your flat file before loading data to BIW. if yes after changes dont open the file in excel and do not do any other changes if you do other changes the previous changes will not work. so make sure about the changes and check the file format with data source.
Regards
Sankar -
Error in Flat file loading....
Hi All,
I tried to load data from a flat file, I got the following error :
u201CError in conversion exit CONVERSION_EXIT_CUNIT_INPUTu201D
What does that mean?
Actually when i used ; as the separator it loaded few data fieds, rest all were blank.
and when i used , as separator it was showing the above error.
So i think the problem is in the format of the file.
Can anyone tell me how can i format to overcome this error.?
Thanks in Advance.
Regards,
Chitra.hi,
check this threads,
Hi, See below link
https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=conversion_exit_cunit_input&objid=c4&daterange=all&numresults=15&rankby=10001
hope this helps you ..
reagrds,
shikha -
Hi friends,
thanks to your suggestions i could solve most of the problems i faced. i get this error, could someone help me with it.
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Message no. RSAR137
Diagnosis
An error occurred in record 1 during execution ofconversion exit CONVERSION_EXIT_CUNIT_INPUT for field /BIC/UNITQ40.
Procedure
Check that the record where the error occurred has the correct format, and correct it accordingly.
regards
krishi kris,
it's happened that value in your characteristics unitq40 not valid, it can be the value not exist in 0unit master data, try to solve this with
- check the monitoring for detail, the invalid value, e.g EA
- transaction se16, table t006a, check this value may not exist here
- logon r/3 side, check if this value exist in table t006a, if so do transfer global setting with use rsa1->source system->right click r/3 source system->'transfer global setting', mark 'unit of measurements' and choose option 'update table'->execute
- if the value also not exist in r/3 then you need to maintain with transaction cuni
see these 2 threads
Re: Error: CONVERSION_EXIT_CUNIT_INPUT and 0Unit
Re: 0Unit / se16 / CUNI
hope this helps.
Maybe you are looking for
-
How do I clean up two user names and share most current music on laptop with the older computer and out of date ipod music. I have to do this carefully, so I don't lose the most current music library on the laptop?
-
We are implementating only FI module ( dont have any MM, SD, PP no other module) and the document range for all documents type has been defined external, I have to upload opening balances, the problem i am facing is the external Document no (as per t
-
Conversion of PR itno PO using BADI me59_exclude
I have a requirement where I have to implement additional logic in t.code me59n ( program RM06BB30 used for converting PR into PO) using badi ME59_EXCLUDE . The logic which I have to implement is 1)Only select the open PR lines i.e. not marked for de
-
Hi All, How to find out in a particular object whether SAP scripts or smart forms are used? If forms are used is there any t.code to find out which type of form is used? Regards, Vamsi P
-
Hello Friends, The tax withheld on Vendors payments and invoices is to be remitted to the tax authorities within 30 days. Due date maintenance is nowhere found in IMG. We have seen for CIN there is u201CMaintain Tax Due Datesu201D available can this